JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Yanyu Song,Xianbo Sun,Long D. Nghiem,Jun Duan,Wen Liu,Yongdi Liu,Zhengqing Cai
Building a heterojunction is a fascinating option to guarantee sufficient carrier separation and transfer efficiency, but the mechanism of charge migration at the heterojunction interface has not been thoroughly studied. Herein, MIL-53(Fe)/Bi 4 O 5 I 2 photocatalyst with a Z-scheme heterojunction structure is constructed, which achieves efficient photocatalytic decontamination under solar light. Driven by the newly-built internal electric field (IEF), the formation of Fe-O-Bi electron migration channel allows for rapid separation and transfer of charge carriers at the heterojunction interface, confirmed by the material characterization and density functional theory (DFT) calculation. The narrower band gap and improved visible light response also contribute to the enhanced photocatalytic activity of composite materials. With levofloxacin as the target pollutant, the optimal MIL-53(Fe)/Bi 4 O 5 I 2 achieves complete removal of pollutant within 150 min, the photocatalysis rate of which is ca. 4.4 and 26.0 times that of pure Bi 4 O 5 I 2 and MIL-53(Fe), respectively. Simultaneously, the optimal composite material exhibits satisfactory photodegradation of seven fluoroquinolones, and the photocatalysis rates are as follows: lomefloxacin > ciprofloxacin > enrofloxacin > norfloxacin > pefloxacin > levofloxacin > marbofloxacin. DFT calculations reveal a positive relationship between degradation rate and Fukui index (ƒ 0 ) of main carbon atoms in seven fluoroquinolones. This study sheds light on the existence of electron migration channels at Z-scheme heterojunction interface to ensure sufficient photoinduced carrier transfer, and reveals the influence of pollutant structure on photolysis rate.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2024
·Vol. 12
·期 21
·12712-12720
·
IF 10.7
Tianhao Yu,Peng Gao,Hong Du,Ling Dong
Metal–organic frameworks (MOFs) have recently been reported as promising catalysts for the oxygen evolution reaction (OER). Hence, we chose hydroxyl-rich 2,5-dihydroxyterephthalic acid as the ligand to prepare a novel MIL-100 and wrapped it on the NiCo-ZIF-67 surface to obtain an amorphous hollow material (NiCo-ZIF-67@Fe-MIL-100, denoted as NiCo-ZIF@MIL). The composite material presents a low overpotential (η ≈ 139 mV @ 10 mA cm−2), a small Tafel slope (119 mV dec−1) and great stability for the OER in 1 M KOH solution. Density Functional Theory (DFT) calculations show that the hydroxyl-rich structure, which accelerates OH− transfer and promotes the formation of the Co–O–Fe bridge, effectively reduces the reaction energy barrier (from 2.67 eV for NiCo-ZIF-67 to 2.08 eV for NiCo-ZIF@MIL). This work provides an important reference for the development of double-MOF materials.
✓ 已验证
产品关联
DOI
高影响因子
GREEN CHEMISTRY
·
2025
·
IF 9.2
Yukang Fan,Dongjie Yang,Fangbao Fu,Xueqing Qiu,Wenli Zhang
Nitrogen and oxygen co-doped porous carbon holds considerable potential for enhancing zinc-ion hybrid capacitors (ZIHCs) in large-scale energy storage. However, designing high-performance carbonaceous cathodes with accessible active sites and efficient ion transport pathways remains challenging. Herein, we employed a multi-scale assembly strategy to construct lignin-based organic–inorganic supramolecular aggregates (LSA) to prepare nitrogen and oxygen co-doped porous carbon nanosheets (S-NLPC), achieving an exceptionally high specific surface area of 2848.1 m2 g−1, a hierarchical porous structure, and substantial levels of nitrogen and oxygen doping (N: 4.0 at% and O: 8.9 at%). The carbon nanosheets saturated with customized micro–mesopores significantly enhance the kinetics of ion transport and storage, while the nitrogen and oxygen doping improves the accessibility of high-density active sites and introduces additional chemisorption sites. As a result, the ZIHCs utilizing S-NLPC as the cathode demonstrate an enhanced specific capacitance of 433 F g−1 (192.4 mA h g−1), superior energy density of 154.3 W h kg−1 at 80.2 W kg−1, and remarkable cycling stability with a capacity retention of 90.2% after 20 000 cycles at 5 A g−1. Furthermore, ex situ characterization reveals that the superior zinc ion storage performance of S-NLPC is primarily attributed to the reversible chemisorption of oxygen functional groups and the co-adsorption mechanism of Zn2+ and H+. This work presents a novel strategy for constructing lignin-based inorganic–organic aggregates utilizing multi-scale forces, providing new insights into the structural design of carbon-based cathodes for high-performance ZIHCs.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Feng Chen,Xuebin Lin,Wei Chen,Na Wen,Yanqiao Jin
The design of a highly active Cu-Co catalyst for catalytic transfer hydrogenolysis of lignin without the use of external hydrogen remains highly challenging. In this work, Cu 2 O was initially encapsulated in ZIF-67, and subsequently Cu 2 O@ZIF-67 was utilized as a precursor and sacrificial template to prepare the unique double core–shell hollow nanocage CuO@Co 3 O 4 . Co and Cu, serving as Lewis acid sites and dehydrogenation sites for the hydrogen-donor solvent isopropanol, respectively, exhibited synergistic enhancement, further increasing the catalytic activity. Under the optimal conditions of 220 °C, 1 MPa N 2 , and 4 h, the catalyst achieved 100 % conversion of 2-phenoxy-1-phenylethanol and 100 % yield towards cyclohexanol and ethylbenzene. Furthermore, the catalyst remained stable and reusable after 5 cycles, providing a practicable guidance for the value-added conversion of lignin.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2024
·
IF 13
Guilin Wei,Linsen Zhou,Xianglin Wang,Ru Tang,Kelin Chen,Junhong Luo,Jiangfeng Song,Yan Shi,Ning Liu,Xingwen Feng
The construction, use, and maintenance of tritium-related equipment will inevitably produce tritium-containing radioactive waste gas, and the production of efficient catalysts for tritium removal remains a difficult problem. Herein, silicalite-1 zeolite with entrapped Pt nanoclusters is skillfully post-oxidized at an appropriate temperature, building highly active Pt─O sites on the nanoclusters to achieve efficient oxidation of hydrogen isotopes at low temperatures. The designed Pt─O sites can directly participate in the oxidation reaction of hydrogen isotopes. Compared to the case without Pt─O sites, the presence of these sites significantly reduces the reaction energy barrier to 0.55 eV, enabling the catalyst to achieve a hydrogen conversion rate of 99% at a low temperature of 40 °C. Specifically, the O atoms consumed by the Pt─O sites in the reaction are replaced by O 2 gas and this cycle repeats, which is consistent with the Mars-van Krevelen (M–K) theory. This ensures efficient catalytic oxidation of hydrogen isotopes, and provides an astonishingly high conversion rate of 99% in the nearly 34 days restart performance test. The results of this study provide insights into the strategic design of efficient catalysts for hydrogen isotope oxidation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2010
·Vol. 118
·期 2
·678-684
·
IF 1.203
Xufei Liu,Jie Zhou,Changbao Chen
Using tribenuron-methyl as a template and N , O -bismethacryloyl ethanolamine as a functional crosslinking monomer, a molecularly imprinted nanowire membrane was prepared over an anodic alumina oxide membrane. The nanowire fabric of the imprinted membrane was established with a scanning electron microscope and a transmission electron microscope. However, the nonimprinted particulate membrane is formed in the absence of a template. Scatchard analysis showed that an equal class of binding sites were formed in the imprinted nanowire membrane and the dissociation constant and the maximum number of these binding sites were estimated to be 1.44 × 10 −5 M and 22.7 µmol/g, respectively. The permeation experiments throughout the imprinted membrane and the nonimprinted one were carried out in a solution containing the template and its competitive analogs. These results demonstrated that the molecularly imprinted nanowire membrane exhibited higher transport selectivity for the template tribenuron-methyl than its analogs, chlorimuron-ethyl, thifensulfuron-methyl and N -(4-bromophenylcarbamoyl)-5-chloro-1H-benzo[d]imidazole-2-carboxamide. But the nonimprinted granular membrane had no permselectivity for the four substrates. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
✓ 已验证
产品关联
DOI
高影响因子
Waste Disposal & Sustainable Energy
·
2024
·Vol. 6
·期 2
·173-183
·
IF 3.6
Li Yiming,Yu Zhihao,Guo Mengyan,Zhang Ming,Xiong Jian,Qiao Yina,Zhang Rui,Lu Xuebin
Biomass-based carbon materials with hierarchical porous structures have attracted attention for their ability to provide more channels and shorten ion transport paths. Here, we developed a simple method based on confined nanospace deposition. During high-temperature treatment, the mesoporous silica layer wrapped around the outside of the crab shells acted as a closed nanospace and effectively suppressed the severe deformation of the crab shell structure by shrinking inward. The prepared carbon material has a layered porous structure with abundant and stable N and O co-doping (N 7.32%, O 3.69%). The specific capacitance of the three-electrode system was 134.3 F/g at a current density of 0.5 A/g in a 6 mol/L KOH electrolyte, and the assembled aqueous symmetric supercapacitors exhibited an excellent cycling stability of 98.81% even after 5000 cycles. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF STORED PRODUCTS RESEARCH
·
2024
·
IF 2.7
Jingyi Su,Zhaoxin Cao,Yueyang Mao,Wen Shen,Xinyu Wang,Siyu Zhang,Yanqi Chen,Xueme Ge
The S/O/W method of solvent evaporation was utilized in this work for manufacturing poly ( ε −caprolactone) (PCL) microspheres loaded with 1−methylcyclopropene (1−MCP−α−CD) and eugenol (EUG) for temperature- and humidity-regulated EUG release. The composite microspheres with higher encapsulation efficiency (71.39 % ± 2.71 %) were attained by optimizing the rotation speed and mass ratio of PCL to composite powder . The microspheres had good spherical shape without large pores. The rate of release could be managed by different temperature and relative humidity conditions with the release of microspheres (96.82 % ± 0.81 % in 12 days) at the temperature of 60 °C (90 % relative humidity) and (86.50 % ± 2.71 % in 12 days) at the 90 % relative humidity (60 °C). Microsphere encapsulation of EUG and 1−MCP−α−CD was demonstrated by Fourier transform infrared spectroscopy and X-ray diffractometer. Thermal gravity analysis demonstrated that the degradation of EUG@β−CD and 1−MCP−α−CD was delayed after encapsulation. The deterioration of loquat (Baiyu, white-fleshed) can be postponed after treatment of EUG/1-MCP composite microspheres. Relative conductivity, total soluble solids, hardness, color, titratable acid , and weight loss of the loquat were also improved. It could significantly inhibit polyphenol oxidase (PPO) and peroxidase (POD) activities and inhibited browning of loquat tissue. EUG/1−MCP composite microspheres we formulated in this work might be employed to increase the shelf life of loquat.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
·
2024
·
IF 5.8
Yang-Yang Xu,Xing Fan,Feng-Yun Ma,Hai-Xu Zou,Xian-Yong Wei
Directly converting lignite into arenes as commodity chemicals and drop-in fuels is a highly desirable target for researchers. However, this is severely limited by the presence of stable inter unit C-O linkages in lignite. Herein, a highly active catalyst, Co-MoS 2 , has been designed and prepared to be used for the selective catalytic cleavage of inter unit C-O bridged bonds (BBs) in the conversion of Naomaohu (NMH), a lignite, to yield arenes. Both catalytic hydrogenation conversion (CHC) and thermal dissolution (a non-catalytic process, named NCHC) of NMH were conducted using n-hexane as the solvent. The soluble fractions from the first stage of NCHC (SF NCHC-1 ) and CHC (SF CHC-1 ), as well as the second stage of NCHC (SF NCHC-2 ) and CHC (SF CHC-2 ) were obtained using the same solvent. After the first-stage catalytic treatment, the relative contents of arenes and alkanes in SF CHC-1 increased by 16.7 % and 9.3 %, respectively, compared to those in SF NCHC-1 , and the relative content of oxygen-containing compounds (OCCs), such as alcohols, phenols , esters, ketones , acids, and furans, decreased by 13.2 %. For the second-stage conversion, the relative contents of arenes and alkanes in SF CHC-2 were 53.5 % and 15.5 % higher than those in SF NCHC-2 , and the relative contents of OCCs was only 6.6 % in SF CHC-2 . The catalytic mechanisms of cleavage of C-O BBs and deoxygenation were proposed based on the CHC of model compounds and density functional theory (DFT) calculation. The adsorption of OCCs and the activation of released hydrogen radical (H·) by Co-MoS 2 , followed by H· addition to the carbon atom connected to oxygen in C-O BBs and oxygen-containing functional groups, are crucial for the cleavage of C-O BBs and formation of deoxygenated compounds, particularly arenes.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Huating Huang,Weiqing Li,Xixi Chen,Zhiming Yang,Minggang Chen,Anhong Zhang,Chun He,Shuanghong Tian
The strong metal–support interaction (MSI) has been widely attributed to enhanced catalytic activity. However, this attribution might be wrong in catalytic ozonation, since MSI that is too strong might impede the activation of electron-poor ozone molecules. Herein, we reported a strategy to subtly modulate the Mn–O–Si interaction by intercalating the carbon film between the silica support and active manganese oxide. When using MnOx/0.5C/SiO2 with the moderate MSI as a catalyst in the catalytic ozonation of refractory paracetamol (PCM), 91.1 ± 2.4% of PCM was removed within 30 min, about 30% higher than that using the catalyst of MnOx/SiO2 with a strong MSI. Moreover, the reaction rate reached 8.01 × 10–2 min–1, 2.2 and 1.3 times that with MnOx/SiO2 and MnOx/1C/SiO2, respectively. Importantly, further integration of MnOx/0.5C/SiO2 into membrane filtration achieved high rejections of PCM (>94.3%) under various realistic water scenarios during a continuous 12 h operation, demonstrating strong resistance to environmental matrices interference. Experimental and theoretical evidence revealed that the moderate MSI resulted in the high dispersion of active MnOx nanoclusters in the size of 2.3–4.4 nm and promoted the adsorption of ozone over MnOx and its dissociation into surface *O, •OH, •O2–, and 1O2 for decontamination. As a constructive work, this study revealed the significance of MSI in catalytic ozonation and offered a simple regulation method for constructing active interfaces of metal-supported catalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2025
·
IF 5.6
Jinnuo Yang,Wenqiang Ai,Lingke Li,Shilong Dong,Jiahui Lv,Ruiqi Wang,Yang Liu,Lei Zu,Huiqin Lian
Sodium-ion batteries (SIBs) offer great viability for extensive energy storage due to their abundance, low cost, and excellent safety. In this study, we investigate the relationship between P–O–C bonds content and electrochemical performance of black phosphorus–hard carbon–carbon nanotubes (BP-HC-CNTs) composite anode. A series of composites are prepared via ball milling, in which the relative P–O–C bonds content is modulated by varying the HC to CNTs ratio, and the effect of different relative P–O–C bond contents on the electrochemical performance of the materials is systematically investigated. The findings indicate that tuning the HC to CNTs ratio alters the chemical bonding degree between phosphorus and carbon, specifically the P–O–C bond content, which positively correlates with enhanced electrochemical performance. Notably, the composite with the highest P–O–C content (36 %) exhibits superior performance compared to those with lower bond contents: The specific capacity is approximately 2.9 times higher after 600 cycles at 6.0 A g ⁻¹ , and after 2000 cycles at 15.0 A g ⁻¹ , it is about 5.7 times higher. These results demonstrate excellent rate capability and cycling stability. Therefore, we propose that adjusting the hard carbon/carbon nanotubes ratio effectively regulates P–O–C bonds formation, which is essential for improving interfacial stability and electrochemical kinetics.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2025
·
IF 6.1
Xin Xu,Ting Ying,Zhanghuan Yang,Ze Zhang,Liang Hu,Tong Shen,Dejian Li,Rui Zhu,Dong Chang
The development of portable exosome detection platforms is crucial for noninvasive early diagnosis of lung cancer, particularly in resource-limited settings. Herein, we engineered a paper-based colorimetric biosensor utilizing a MnO 2 /CeO 2 heterojunction nanozyme for visual quantification of plasma exosomes. The heterojunction synergistically integrates the high surface area of CeO 2 (45.689 m 2 /g) with the nanorod shaped MnO 2 , generating an interfacial electron transfer pathway that enhances peroxidase-like activity by 1.77 and 5.87 fold (K m = 1.197 mM, V max = 0.884 M/min) compared to individual components. Molecular recognition was achieved through dual-target immobilization: exosome-specific aptamers and anti-CD63/FGG/FGB antibodies conjugated on a chitosan-modified cellulose substrate. A smartphone-based hue-saturation-value (HSV) analysis system embedded in the platform enabled rapid on-site screening within 15 min, followed by microplate scanning of suspected high-risk samples, achieving a detection range of 10 2 –10 8 particles/μL with an ultralow detection limit of ∼2 particles/μL. Integration of a logistic regression model incorporating CD63, FGG, and FGB absorbance values further improved classification robustness. Clinical validation using 194 plasma samples demonstrated exceptional diagnostic accuracy in discriminating malignant from benign pulmonary nodules (AUC = 0.996), with a 95 % confidence interval ranging from 0.797 to 1.05, with 98.51 % sensitivity and 95.52 % specificity. This work establishes a multimodal strategy combining heterojunction nanozyme catalysis, paper-based microfluidics, smartphone-assisted imaging, and machine learning, offering a scalable paradigm for liquid biopsy applications in primary healthcare.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）