JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2014
·Vol. 161
·期 10
·B201
·
IF 2.859
Yang Fan,Zijuan Yang,Xinhua Cao,Peifang Liu,Sen Chen,Zhen Cao
Hierarchical macro-mesoporous Ni(OH)2 were prepared by hydrothermal treatment of Ni(NO3)2 with dicyandiamide. This Ni(OH)2 nanostructure can be transformed to mesoporous NiO via calcination at 300°C. The structure, morphology and textural properties of the as-synthesized Ni(OH)2 and NiO were characterized. The electrochemical property and electrochemical sensing performance toward glucose detection were investigated. Owing to the unique macro-mesoporous structure, the Ni(OH)2 nanostructure could provide amperometric sensing of glucose with wide linear range (0.01–8.3 mM), high sensitivity of 243 μA mM cm−2 and low detection limit of 1 μM. Moreover, this glucose sensor also exhibited excellent stability, good selectivity and reproducibility.
研究领域:
材料科学
·
分析化学
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2022
·
IF 6.14
Binglin Guo,Yihao Gao,Yongyue Li,Xin Sun,Shuailin Chen,Meicheng Li
Ni(OH)2 has low production cost and high theoretical specific capacity, while on account of the poor electronic conductivity, it shows inferior electrochemical performance including cycling stability and rate capability. This work focuses on a composite material that is in situ grown Ni(OH)2 nanosheets on reduced graphene oxide (rGO), and employing the fewer-defect rGO to build a three-dimensional conductive network provides outstanding conductivity. The specific capacitances (Cm) of the Ni(OH)2/rGO (NHG) electrode are 2776 F·g–1 at 2 A·g–1 and even 1570 F·g–1 at 50 A·g–1, demonstrating remarkable rate capability. It indicates that the combination of the nano grown Ni(OH)2 and rGO conductive substrate shortens the ion diffusion path and increases the electron transfer rate; hence, the composite rate capability has been significantly improved. The composite materials and active carbon were combined to be an asymmetric supercapacitor, which had a high energy density of 39.24 Wh·kg–1 at 1962 W·kg–1. After 10,000 cycles at 5 A·g–1, the capacity retains 91.4%.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Yi-Ran Du,Rui Wang,Qing-Shan Niu,Yi-Yu Tao,Bao-Hua Xu
In this study, the bimetallic RuM-CeO 2 (M = Ni, Fe, Cu, K and Cs) catalysts were facilely fabricated by taking the commercially available CeO 2 (99.95 % metals basis, Aladdin, < 50 nm of diameter) as the support. They displayed distinct catalytic performance, especially the chemo-selectivity, on the methoxycarbonylation of styrene with CO and CH 3 OH. Impressively, Ru 2 Ni 0.6 -CeO 2 provided an up to 90.1 % yield of methyl phenylpropionate with satisfied linear selectivity (L/B = 91/9). The characterization and mechanistic results demonstrated that the doping of proper amount of Ni species enriches the local oxygen vacancy (Vö) at the surface but slightly reduces the charge at Ru sites, thereby modulating the interfacial Lewis acid − base pair (Ru-O-Ce-Vö) for catalysis. It thus enhances the CH 3 OH dissociation, leading to high coverage of OCH 3 species with low adsorption energy and relatively weak acidity. Further, the insertion of CO becomes readily due to the weak Ru-CO affinity at electron-deficient Ru center therein. As such, the apparent activation energies ( E a ) of styrene methoxycarbonylation over Ru 2 -CeO 2 (71.2 kJ mol −1 ) is nearly half-reduced by doping Ni element (Ru 2 Ni 0.6 -CeO 2 : 37.5 kJ mol −1 ). Meanwhile, the competitive side reactions at the surface of Ru 2 Ni 0.6 -CeO 2 is inhibited without sufficient acid strength and acid sites. Both aromatic olefins and cyclic olefins were well tolerated under such a system.
研究领域:
催化化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Liguo Yue,Xiao Wang,Taotao Sun,Hui Liu,Qi Li,Ning Wu,Hao Guo,Wu Yang
Two-dimensional metal-organic frameworks and nanoflowers of the MoS 2 form a composite structure as an electrode material for high-performance supercapacitor application. MoS 2 expands in the accordion-type Ni-MOF layers, and -S- joins the two materials to form a Ni-MOF coating MoS 2 composite structure. The composite material MoS 2 @Ni-MOF combines the structural characteristics of the Ni-MOF and MoS 2 , and effectively improves the electrochemical performance. The basic skeleton structure of the MoS 2 @Ni-MOF material remains unchanged, showing a remarkable specific capacitance of 1590.24 F·g −1 at a current density of 1.0 A·g −1 and an excellent cycle stability (retention rate of 87.97% after 20,000 cycles at current of 5.0 A·g −1 ). Due to the special composite structure of MoS 2 @Ni-MOF, the as-assembled MoS 2 @Ni-MOF//AC assymmetric supercapacitor (ASC) device exhibits a maximum energy density of 72.93 Wh·kg −1 at a power density of 375 W·Kg −1 . These excellent electrochemical properties indicate that the MoS 2 @Ni-MOF has potential applications in energy storage devices.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
KEY ENGINEERING MATERIALS
·
2012
·
IF 0
Hai Feng Chen,Ting Yan
New nano nickel-doped titanium dioxide composites had been produced by a conducting sol-gel method. The alginate gel was used as a template to prevent the conglomeration of the inorganic materials. In this experiment, nickel nitrate, tetrabutyl titanate and sodium alginate were used as main materials to prepare different amount nickel-doped TiO2 particles. The amount of Ni was studied from 0 to 9 mol.-% (where mol.-% refers to the Ni/TiO2 molar ratio), and the Ni/TiO2 composites were characterized by XRD, FT-IR, TG-DTA, and we carried out doping amount, catalyst amount and illumination time influence on photocatalytic performance of nano Ni/TiO2 composite in aqueous methyl orange. The activity of TiO2 gradually increased with the increasing of doping amount, and there was highest catalytic efficiency when Ni = 9 % mol.
研究领域:
材料科学
·
环境科学
✓ 已验证
DOI
CATALYSIS TODAY
·
2024
·
IF 5.2
Yushuai Sang,Mingze Yang,Hong Chen,Yongdan Li
Catalytic lignin solvolysis (CLS) holds promise for efficient lignin utilization, yielding small molecules with minimal or no char formation. However, the role of different active sites of catalyst in CLS are rarely discussed. Here, Ni catalysts on different supports, i.e., SiO 2 , Al 2 O 3 , MgO, and ZrO 2 , were prepared with the aim of manipulating the relative importance of metal and acid-base functionalities to investigate the role of different active sites in the enzymatic hydrolysis of lignin (EHL) ethanolysis. The main ether linkage, i.e., β-O-4, in EHL is cleaved without the participation of a catalyst. Metal sites suppress repolymerization through hydrogenating active intermediates, while acid and base sites facilitate the conversion of phenolic monomers into complex alkylated and etherified products and also promote repolymerization reactions. Among the catalysts, Ni/SiO 2 demonstrated the highest hydrogenation activity and yielded the most monomers (24.7 wt %) at 280 °C for 6 h under 2 MPa H 2 in ethanol. These findings shed light on the catalytic mechanisms in CLS, offering valuable insights for future catalyst design.
研究领域:
化学工程
·
催化科学
·
生物质利用
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 112
·111539-111548
·
IF 3.289
Hui Deng,Shi-Xi Zhao,Xia Wu,Lei Wei,Yu-Feng Deng,Ce-Wen Nan
The chief drawback of Li2MnSiO4 cathode materials is structural instability deriving from the transformation of [MnO4] tetrahedra to [MnO6] octahedra during oxidation from Mn(II) to Mn(III) and the Jahn–Teller effect especially from Mn(III) to Mn(IV). Based on the theory that Ni2+ could keep the [NiO4] ligand unchanged and stable during oxidation/reduction, [NiO4] tetrahedra may behave as a regional structural framework to support the total crystal lattice and alleviate structural distortion partially. In this paper we synthesize nano-Li2Mn1−xNixSiO4/C samples with a small amount of Ni as the dopant via a hydrothermal route. Firstly, we discuss the existential state of Ni through XPS spectra, and demonstrate that both Ni2+ and metallic Ni coexist, especially Ni2+ could improve structural stability. The influence of Ni doping on morphology, structural stability, and electrochemical performance is discussed through Raman spectroscopy and electrochemical tests below. It is confirmed that there exists an optimal Ni content under which the optimal performance is displayed. In our work, the optimum Ni content is 5.0%, and the maximal discharge capacity achieved is 235 mA h g−1 for the 5.0% Ni doped sample in the first cycle.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Man Zhao,Liwu Qiang,Meng Bai,He Xiao,Li Zhang,Junming Zhang,Tianjun Hu,Baoliang Lv,Shengxiang Wang,Jianfeng Jia
Rational design of Ni-based electrocatalysts for methanol electrooxidation reaction (MOR) and in-depth understanding of their catalytic mechanism remain a challenge. Herein, carbon dots/graphene heterostructure is constructed to load Ni(OH) 2 and the role of carbon dots focuses on regulating distribution and electronic property of Ni(OH) 2 . Regulation mechanism of carbon dots on Ni(OH) 2 for optimizing MOR activity are revealed by in-situ Raman, in-situ FTIR, operando electrochemical impedance spectroscopy, X-ray absorption fine structure (XAFS) spectroscopy, and so on. It’s found carbon dots could disperse Ni species and regulate their distribution configuration. Appropriate amount of carbon dots promotes the formation of highly dispersed CDs&Ni(OH) 2 type. Because of strong interaction between Ni(OH) 2 and CDs, coordination environment and local electronic structure of Ni in Ni-CDs/G can be regulated by carbon dots, leading to phase-ratio variation of α-Ni(OH) 2 /β‑Ni(OH) 2 and d-band center shift of Ni(OH) 2 . For the best Ni-4CDs/G electrocatalyst, more formed α-Ni(OH) 2 lead to d-band center downshift from the E F level and optimized its adsorption of methanol. Ni-4CDs/G shows the specific activity of 299.2 mA cm −2 and mass activity of 3756.5 mA mg −1 at peak current. In water splitting test, lower initial overpotential of 140 mV is found in methanol electrolysis than that in water electrolysis. This opens a new door to regulate the metal-based electrocatalysts by CDs and will inspire more people to explore CDs-based materials for electrocatalytic application.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2024
·
IF 4.1
Yeshuang Wang,Zhelin Su,Mingxian Duan,Huiling Fan,Ju Shangguan,Chao Yang
Metal oxides-based adsorbents used for desulfurization encounter significant challenges during practical application owing to their inferior reusability and the nature of solid waste of their desulfurization products. This situation might be alleviated to some extent through a rational design of Ni–Mo composite, enabling them firstly to be used as adsorbents for H 2 S removal, and then being utilized as catalysts after desulfurization for C 4 H 4 S hydrogenation. The Ni–Mo composites before and after desulfurization were characterized using XRD, FT-IR, SEM, N 2 adsorption–desorption, XPS, CO 2 -TPD and H 2 -TPR techniques. The experimental findings suggested that Ni and Mo species function as primary active sites for H 2 S adsorption and C 4 H 4 S hydrogenation reactions, respectively. The Ni and Mo composite greatly facilitated the coupling of these two reactions due to the formation of NiMoO 4 phase. This novel active phase not only boosted the interaction between metal and H 2 S but also promoted the formation of weak and moderate alkaline sites, thereby significantly enhancing desulfurization performance. Importantly, this active phase fostered the sulfurization of Mo species and transforming into a Ni–Mo–S component, further favoring the subsequent catalytic reaction in C 4 H 4 S hydrogenation. Consequently, the prepared Ni–Mo composite oxides exhibited excellent properties in H 2 S adsorption and C 4 H 4 S hydrogenation activity, surpassing the capabilities of single metal adsorbents and commercial hydrogenation catalysts.
研究领域:
化学工程
·
催化材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2024
·Vol. 35
·期 11
·1-17
·
IF 2.8
Pan Deng,Wang Yanan,Lin Liwei,Zhang Yuzhe,Zhou Man,Li Zhongyu,Xu Song
Photothermal catalytic CO 2 reduction can combine photocatalysis and thermal catalysis by using full-spectrum solar energy to convert CO 2 into high value-added chemicals. This can effectively alleviate the problems of excessive CO 2 emissions and thermal catalytic energy waste. In this paper, a novel catalyst was prepared using Ce-MOF as a precursor to generate Cu/Ni/CeO 2 for efficient reduction of CO 2 to CO by hydrogenation. Due to the rod-like structure of CeO 2 and the high dispersion of Cu and Ni nanoparticles, 10%Cu 5%Ni CeO 2 can achieve a catalytic activity of 54.21 mmol g −1 h −1 in the full solar spectrum. The supported Cu and Ni metals are the active sites for catalytic reduction. Meanwhile, Cu and Ni enhanced the light absorption ability of the catalyst and the surface temperature under illumination. This is due to the hot charge carriers generated by LSPR effect in Ni and Cu metal nanoparticles, which can dissipate energy through local heating, thus increasing the temperature of the catalyst under illumination. It can be found that the CO 2 reduction activity of photo-assisted thermocatalysis is higher than that of thermal catalysis under the same conditions. Therefore, the combined effect of the electrons generated by UV–Vis light and the heating effect of near-infrared light on catalyst could improve the catalytic activity. This work might provide a potential strategy for efficient photothermal reduction of CO 2 in the future.
研究领域:
化学工程
·
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2024
·
IF 6.7
Zhixian Bao,Dekang Li,Zhiheng Wang,Yuxin Wen,Lijun Jin,Haoquan Hu
The lack of detailed functions of different REMs in NH 3 decomposition to H 2 makes the efficient modified catalysts not rationally be designed though many REMs-modified catalysts have been reported. In this work, the 10Ni/A 1 Mg 4 O α (A = La, Ce, and Y) and 10Ni/MgO, in which supports were synthesized by the sol–gel method and Ni was loaded by the wet-impregnate method, were comparatively investigated to reveal the effect of REMs against NH 3 decomposition reaction. The presence of REMs enhanced the activity of 10Ni/A 1 Mg 4 O α and decreased the activation energy as greatly as by half compared to 10Ni/MgO. The produced H 2 in situ has little impact on the activity of 10Ni/A 1 Mg 4 O α , among which Ce has the most excellent H 2 desorption ability. The intrinsic activity of catalysts was improved better by Ce and Y than La and the best Ni particle size is around 6 nm according to TOF, though the Ni particle is the smallest (4.9 nm) in 10Ni/La 1 Mg 4 O α . The surface structure of catalysts was tuned by doping REMs, forming a solid solution and some defects (oxygen vacancies), which enhanced the interaction between active metal and support with obvious electron transfer from support to Ni obtaining a better Ni dispersion and making NiO easier to be reduced. Additionally, the catalysts doped by La or Ce possess more oxygen vacancy due to the changes of La 2 O 2 CO 3 and the valence of Ce, exhibiting stronger basic sites and better N 2 desorption capacity. The study offers a promising strategy for utilizing appropriate or multiple REMs to synthesize effective catalysts effectively for catalyzing NH 3 decomposition in the future.
研究领域:
化学工程
·
催化科学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Shuya Rui,Na Liu,Lingwei Ren,Yang Liu,Zian Liu,Binghui Wu,Hua Pan,Zhiping Ye
Traditional Mn-Ce catalysts for selective catalytic reduction (SCR) of NO with CO (CO-SCR) in iron and steel flue gases are often hindered by competitive adsorption of NO and CO, which compromises catalytic efficiency. In this study, we present a Ni-doped Mn-Ce catalyst that overcomes these challenges, achieving 96 % NO conversion, 98 % N 2 selectivity, and 44 % CO conversion at 175 °C. Comprehensive characterization of the catalyst reveals that Ni doping significantly enhances Mn-Ce interactions, boosting oxygen vacancy density and promoting efficient redox cycling between Mn 3 + /Mn 4+ and Ce 3+ /Ce 4+ . Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) confirms preferential NO adsorption at oxygen vacancy sites, minimizing CO-NO competition and stabilizing the Langmuir-Hinshelwood mechanism, where both gases co-adsorb and react at oxygen-rich vacancies. Mechanistic insights suggest that Ni facilitates electron transfer, weakening the N–O bond in NO and accelerating its dissociation, resulting in faster NO reduction. This study establishes Ni doping as a promising strategy for improving the low-temperature performance of Mn-Ce-based CO-SCR catalysts, paving the way for more efficient catalytic systems.
研究领域:
催化化学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）