CELLULOSE
·
2018
·Vol. 25
·期 10
·5807-5819
·
IF 3.809
Sun Zhuangzhi,Du Shanqi,Li Fei,Yang Lu,Zhang Dan,Song Wenlong
A nanocomposite soft actuator based on porous high-conductivity electrode membrane, which was composed of biopolymer cellulose mixed with chitosan and highly conductive nanoparticles generated by reduced graphene oxide encapsulated multi-walled carbon nanotube, was developed in this paper. No new substance was discovered in the regenerated electrode layer through the scanning analysis from FT-IR and XRD. Actuators exhibited significant enhancement in peak to peak displacement, which was 3.64 times increased than the traditional value at 5 V 0.1 Hz. With the test of solid-state electric double layer capacitor, actuators showed the highest specific capacitance (10.695 F g −1 ) at the current density of 1 A g −1 , the lowest internal resistance (9.2 Ω g −1 ) in the frequency range of 10 5 –10 −2 Hz, and the lowest energy density (901 Wh kg −1 ) at the current density of 10 A g −1 , which demonstrated the absolute advantages in the conductivity and channels for electrons. These findings suggest that research on porous high-conductivity electrode layer holds great promise in the further study of higher performance actuators.
研究领域:
生物材料学
·
纳米医学
·
组织工程
·
柔性电子学
·
生物力学
·
智能驱动系统
✓ 已验证
DOI
高影响因子
POLYMER BULLETIN
·
2016
·Vol. 74
·期 1
·75-90
·
IF 1.371
Chen Xiuqiong,Yan Huiqiong,Shi Zaifeng,Feng Yuhong,Li Jiacheng,Lin Qiang,Wang Xianghui,Sun Wei
A novel biosensor based on electro-co-deposition of myoglobin (Mb), sodium alginate (SA), Fe 3 O 4 -graphene (Fe 3 O 4 -GR) composite on the carbon ionic liquid electrode (CILE) was fabricated using Nafion as the film forming material to improve the stability of protein immobilized on the electrode surface, and the modified electrode was abbreviated as Nafion/Mb-SA-Fe 3 O 4 -GR/CILE. FT-IR and UV–vis absorption spectra suggested that Mb could retain its native structure after being immobilized in the SA-Fe 3 O 4 -GR composite film. The electrochemical behavior of the modified electrode was studied by cyclic voltammetry, and a pair of symmetric redox peaks appeared in the cyclic voltammograms, indicating that direct electron transfer of Mb was realized on the modified electrode, which was ascribed to the good electrocatalytic capability of Fe 3 O 4 -GR composite, the good biocompatibility of SA and the synergistic effects of SA and Fe 3 O 4 -GR composite. The electrochemical parameters of the electron transfer number ( n ), the charge transfer coefficient ( α ) and the electron transfer rate constant ( k
s ) were calculated as 0.982, 0.357 and 0.234 s −1 , respectively. The modified electrode exhibited good electrocatalytic ability to the reduction of trichloroacetic acid (TCA) with wide linear range from 1.4 to 119.4 mmol/L, low detection limit as 0.174 mmol/L (3 σ ), good stability and reproducibility.
研究领域:
生物传感器
·
电化学
·
蛋白质电化学
·
纳米材料
·
生物相容性材料
·
分子诊断
·
转化医学
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2016
·
IF 4.803
Na Li,ChunYi Zhi,Haiyan Zhang
The preparation of high specific-capacity pseudocapacitive transition-metal-oxide/hydroxide (TMH) materials into transparent micro-structure electrodes is a great challenge and has become the bottleneck restricting the performance of transparent flexible supercapacitors . Beyond that, extending the operating voltage window is an urgent need for improving energy density . Here, Co(OH) 2 nanosheets and amorphous FeOOH nanowires were prepared into transparent films through a simple and scalable bio-inspired method at the air-solution interface. Both nanostructures are enwrapped in graphene shells (Co@Gr-TFandFe@Gr-TF) for use as transparent asymmetric pseudocapacitive electrodes. The unique encapsulation structures (1) provide pseudocapacitive electrode materials, especially an amorphous FeOOH structure cathode, (2) build up rapid three-dimensional electron and ion transport pathways together with the underlying ITO layer, (3) alleviate the exfoliation and dissolution of the active materials into electrolyte, and (4) extend the potential window of the FeOOH cathode from −0.8 ∼ 0 V to −1.2 ∼ 0 V with minimal cycling stability degradation. The asymmetric transparent and flexible supercapacitor based on Co@Gr-TF//Fe@Gr-TF operated at 1.8 V exhibits good transparency (50.5% at 550 nm), high specific capacitance (25.5 mF cm −2 , one order higher than the maximum value reported for FFT-GP), and high energy density (1.04 mWh cm −3 , comparable to that of nontransparent devices) as well as a long cycle life (10 000 cycles) with high-capacity retention (83.5%).
研究领域:
材料科学
·
纳米科技
·
电化学
·
能源存储
·
柔性电子学
·
功能薄膜
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2015
·Vol. 3
·期 43
·21569-21577
·
IF 7.443
Zhaoqiang Li,Longwei Yin
A sandwich-like structure with reduced graphene oxide (RGO) wrapped MOF-derived ZnCo2O4–ZnO–C polyhedrons on nickel foam as an anode for high performance lithium ion batteries (LIBs) is for the first time reported via simply growing MOFs on Ni foam, and wrapping graphene oxide nanosheets on MOFs, and then annealing under a N2 atmosphere. It should be noted that the MOF-derived porous products are composed of carbon-coated spinel ZnCo2O4–ZnO nanoparticle polyhedrons. When tested as anodes for LIBs, the unique RGO/ZnCo2O4–ZnO–C/Ni sandwich-structured LIB anodes exhibit superior coulombic efficiency, excellent cycling stability and rate capability. The in situ formed carbon layers outside the ZnCo2O4–ZnO act as not only a conductive substrate but also a buffer layer for volume changes. The open pores in ZnCo2O4–ZnO–C polyhedrons provide sufficient electrolyte as well as serve as cushion space to further alleviate volume changes. The RGO nanosheets act as a flexible protector to firmly fix polyhedrons on the Ni foam, as well as a conductive substrate to wire up all the polyhedrons. The interconnected carbon layers and two high conductive substrates (RGO and Ni foam) together form an unhindered highway for charge transfer during discharge/charge processes, promising good electrochemical performance.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
·
固态化学
·
电极工程
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2024
·
IF 5.7
Jiajun Ma,Zongwei Guo,Shengtao Dai,Yannong Liu,Huiru Hu,Peikun Li,Lin Jin,Yuhui Ao
Inducing highly oriented 2D nanosheets to create a mussel-inspired interface phase on the carbon fiber (CF) surface to enhance its composites’ strength and toughness has become a great challenge. In this study, a novel coating was synthesized to induce the graphene oxide (GO) oriented distributed on the CF surface while constructing a biomimetic "Brick-and-Mortar" structural interface phase, which simultaneously promoted the strength and toughness of CF composites . Acting as a sizing agent, di-pyrene terminated PEG (py-PEG-py) facilitates abundant π-π* stacking interactions, and enables flexible chain segment motion during interface fracture of composites, as well as effectively improving the toughness of composites. Eventually, the formation of a superior mechanism on the CF surface results in remarkable properties for composites, including an interfacial shear strength (IFSS) of 99.3 MPa, interlaminar shear strength of 93.2 MPa, and flexural strength of 1430 MPa. The tensile strength and toughness increased to 1777 MPa and 45.0 MJm −3 , respectively. Simultaneously, the continuous thermal conduction pathway produced by the oriented attachment of GO on the CF surface increased in-plane thermal conductivity . The reinforcing mechanisms of the unique mussel-inspired coating were systematically investigated. This work opens up an effective and scalability avenue for obtaining high-performance CF composites.
研究领域:
材料科学
·
复合材料工程
·
界面化学
·
高分子化学
·
纳米材料学
·
仿生材料
·
力学性能
·
热传导
✓ 已验证
DOI
高影响因子
CHROMATOGRAPHIA
·
2018
·Vol. 82
·期 3
·683-693
·
IF 1.401
Shen Chen,Wu Tong,Zang Xiaohuan
In this work, a zeolitic imidazolate framework-based graphene oxide composite (ZIF-8@GO) was prepared and used as the adsorbent in hollow fiber stir bar sorptive extraction. The stir bar was constructed of a small section of hollow fiber filled with 5 mg ZIF-8@GO and a thin stainless wire of 1.5 cm long in its lumen, and used to extract the trace levels of phthalate esters from children’s food samples prior to gas chromatography–mass spectrometric detection. The ZIF-8@GO showed a high adsorption efficiency for the compounds containing aromatic rings. The main experimental parameters that can impact the extraction efficiency including extraction temperature, extraction time, stirring rate, sample salinity, and desorption conditions were investigated. Under the optimized conditions, the limits of detection (LODs) for the five phthalate esters (diethyl phthalate, dipropyl phthalate, diisobutyl phthalate, butylbenzyl phthalate, and di(2-ethylhexyl) phthalate) were 0.15–0.6 µg L −1 for CiCi beverage and pear juice samples, and 0.75–2.2 µg kg −1 for jam samples. The limits of quantitation (LOQs) were 0.5–2.0 µg L −1 for CiCi beverage and pear juice samples, and 2.5–7.5 µg kg −1 for jam samples. Wide linear ranges of 0.5–500.0 µg L −1 and 2.5–2000 µg kg −1 were obtained for CiCi beverage, pear juice samples and jam samples, respectively, with good repeatability (RSD < 11%) and high method recoveries (72%–100%). The lifetime test results showed that the ZIF-8@GO-based hollow fiber stir bar can be reused for 120 extraction cycles without a significant loss of extraction efficiency, indicating its high durability and stability. The established method was applied successfully for the determination of the phthalate esters (PAEs) in children’s food samples. Graphical abstract
研究领域:
分析化学
·
食品安全
·
环境毒理学
·
暴露科学
·
食品化学
·
污染物检测
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2016
·
IF 2.822
Fang Long,Jing Wang,Zhaohui Zhang,Liang Yan
A novel magnetic molecularly imprinted electrochemical sensor (MMIP-sensor) combined with magnetic molecularly imprinted solid-phase extraction (MMISPE) was constructed for rapid and sensitive detection of tetrabromobisphenol S (TBBPS) in water samples. The magnetic molecularly imprinted polymer based on magnetic graphene/multi-walled carbon nanotubes hybrid composite (MMIP/Gr-MWCNTs) was prepared as MMISPE sorbet to separate and enrich TBBPS from complex system. Adsorption results showed that the MMIP/Gr-MWCNTs possessed excellent selective adsorption toward TBBPS with a maximum adsorption capacity of 17.83 mg g − 1 . The magnetic imprinted sensor based on the magnetic Gr-MWCNTs composite modified electrode was prepared by electropolymerization of dopamine monomer . The high sensitivity of the MMIP-sensor was attributed to the large specific surface area and excellent electrical conductivity of the magnetic Gr-MWCNTs composites. The detection limit of the MIP-sensor toward TBBPS was calculated as 2.1 × 10 − 11 mol L − 1 (S/N = 3). Under the optimum conditions, the MISPE-MMIP-sensor combination system provided 10–12 fold preconcentration than that of MMIP-sensor alone determination. The MISPE-MMIP-sensor was successfully used for detection of TBBPS in drinking water , rain water , lake water and tap water with recoveries of 88.4–98.8%.
研究领域:
分析化学
·
环境监测
·
电化学传感
·
分子印迹技术
·
水处理
·
污染物检测
✓ 已验证
DOI
高影响因子
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
·
2014
·Vol. 16
·期 23
·11584-11589
·
IF 4.198
Yunyun Huang,Wensheng Lin,Kan Chen,Wenkai Zhang,Xudong Chen,Ming Qiu Zhang
A water-processable blue fluorescent silver nanoparticle@graphene–polymer composite (Ag@G–pNIPAM) consisting of graphene coated with a thermally responsive poly-(N-isopropylacrylamide) (pNIPAM) shell is prepared. The pNIPAM shell swells or collapses as a function of temperature, serving as a means to trap silver nanoparticles in solution and get them sufficiently close to the graphene core to provide fluorescence enhancement based on the local surface plasmon resonance (LSPR) effect. The unique thermoresponsive properties and high enhancement ratio of the material should find application in solution fluorescence enhancers and a variety of biomedical applications, such as cellular uptake, sensing and imaging.
研究领域:
纳米医学
·
生物材料
·
分子影像学
·
生物传感
·
药物递送系统
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2024
·Vol. 31
·期 32
·44759-44769
·
IF 0
Wu Rui,Song Xi,Tian Guanghui
Highly active Fe 3 O 4 /GO/Au composite nanomaterial was fabricated as a substrate of surface-enhanced Raman spectroscopy (SERS) and applied for pesticide residue detection. The three-layer multifunctional Fe 3 O 4 /GO/Au nanoparticles (NPs) were designed by facile method, with high hotspots, and were characterized by various techniques, including ultraviolet spectrophotometry (UV), X-ray diffraction (XRD), infrared absorption spectrometer (IR), and transmission electron microscopy (TEM). The performance of Fe 3 O 4 /GO/Au was evaluated by Raman spectroscopy with R6G as a probe molecule to verify its enhancement effect. It exhibited a strong Raman signal with 10 −6 M of R6G. Furthermore, the presence of Fe 3 O 4 /GO/Au nanohybrid enabled the SERS-based method to detect mancozeb and showed an excellent linear relationship in the range of 0.25–25 ppm, with a low limit of detection (0.077 ppm), satisfactory EF, stability, and repeatability. In addition, the mechanism of SERS enhancement with electromagnetic mechanism (EM) and chemical mechanism (CM) was discussed in detail. Therefore, the proposed SERS approach holds promise as an auxiliary technique for screening contaminated agricultural products, environmental sample, and food in the future.
✓ 已验证
产品关联
DOI
PubMed
Journal of Energy Storage
·
2025
·
IF 9.8
Liwei Yang,Xinshuai Yan,Jianguo Duan,Xiaoxiao Huang,Qing Ma
As an intermittent energy source, the efficient utilization of solar energy relies on stable and efficient energy conversion and storage technologies. Phase change materials (PCM) have become ideal candidate materials for solar thermal storage due to their high energy storage density and reversible cycling characteristics. However, traditional organic solid-liquid phase transition materials are prone to leakage during the phase transition process and have a relatively low photothermal conversion efficiency, which limits their practical application. To address the above issues, this study designed a novel composite phase change material (CPCM). By collaboratively loading nanomaterials of different dimensions, such as copper nanowires (CuNWs) and MXene, into a graphene porous framework and encapsulating paraffin (PW), the reduced graphene oxide (rGO)/ CuNWs/MXene/PW (rGCuMPW) composite material was successfully constructed. Among them, the high light absorption capacity of MXene, combined with the excellent thermal conductivity of CuNWs, significantly improved the photothermal conversion efficiency (92.11 %) and thermal energy storage density (ΔH = 165.77 J·g −1 ) of the material. In addition, this material still maintains a stable phase transition enthalpy value after 100 cycles, demonstrating excellent cycle stability and reusability. The CuNWs-MXene synergistic modification strategy proposed in this study not only effectively reduces the leakage rate of organic PCM, but also significantly improves the performance of photothermal conversion and thermal energy storage, providing a new type of high-performance CPCM for the efficient utilization of solar energy.
✓ 已验证
产品关联
DOI
高影响因子
Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2025
·
IF 4.6
Jiangnan Chen,Zhouchao Wang,Lin Xu,Huifang Wang,Xianghua Gao,Baolong Niu,Wenfeng Li
In the realm of glucose detection, nickel-based and copper-based nanocomposites have garnered significant attention due to their exceptional catalytic performance and high sensitivity. This study realized linear detection across dual concentration ranges in alkaline media by in situ growing Ni/Cu-BTC spherical nanocatalysts on reduced graphene oxide (rGO). From 350 μM to 2.95 mM, with a low detection limit (LOD L ) of 21.7 μM (S/N = 3) and a sensitivity (S L ) of 40 nA mM −1 cm −2 ; from 2.95 mM to 9.45 mM, the high-concentration detection limit (LOD H ) is 1.1 mM (S/N = 3), with an improved sensitivity (S H ) of 165.7 nA mM −1 cm −2 . The response time (t) is under 2 s. Additionally, the sensor demonstrated robust interference resistance, excellent stability (%RSD = 3.57 %), repeatability (%RSD = 2.27 %), and reproducibility (%RSD = 2.34 %). In real-world sample testing, this sensor measured glucose concentrations in plasma from healthy individuals both on an empty stomach and half an hour after eating, with a relative standard deviation range of 0.94 %–2.33 %. These results suggest that the rGO-Ni/Cu-BTC composite is a promising enzyme-free electrochemical sensing material for glucose detection
✓ 已验证
产品关联
DOI
高影响因子
WATER AIR AND SOIL POLLUTION
·
2025
·Vol. 237
·期 1
·8
·
IF 3
Li Xiaoya,Zheng Ru,Duan Guangyu,Cao Zhanfang,Han Kai,Zhong Hong,Ma Xin,Wang Shuai
A poly( N -vinylpyrrolidone)-graphene oxide (NVP-GO) composite with high adsorption capacity for methylene blue (MB) was synthesized and comprehensively characterized using SEM, XRD, FT-IR, TG, elemental analysis, nitrogen physical adsorption, and XPS. The adsorption of MB onto NVP-GO was examined in relation to several variables, including contact time, adsorption temperature, initial concentration of MB, and pH. Adsorption kinetics, isotherms, and thermodynamics were thoroughly investigated. The adsorption kinetics followed the pseudo-second-order model, and the Langmuir isotherm model indicated a monolayer adsorption pattern of MB onto NVP-GO, with the maximum adsorption capacities ranging from 116.6 to 161.3 mg·g −1 at temperatures between 25 and 45 °C. Thermodynamic assessments and activation energy calculations demonstrated that the adsorption process was spontaneous, endothermic, and controlled by chemical activation. XPS analysis highlighted the significance of electrostatic interactions, n–π interactions, π–π stacking, and hydrogen bonding in mediating the adsorption mechanisms between NVP-GO and MB. Notably, NVP-GO maintained stable adsorption efficiency over three consecutive adsorption–desorption cycles, highlighting its potential as a promising adsorbent for wastewater treatment. Graphical
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）