CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Yi Fang,Shoubing Chai,Zhiwei Chu,Zirui He,Yingjie Li
In the calcium looping CO 2 capture process, using CO in the flue gas to reduce NO at a high molar ratio of CO to NO (e.g., above 10:1) can achieve efficient removal of NO. However, the lots of unreacted CO causes secondary pollution. In this study, a novel Cu/Ce co-modified CaO was proposed for cyclic CO 2 capture and the catalytic NO reduction at a low CO:NO molar ratio (e.g., 2:1). The experimental findings indicate that Cu/Ce modification improves the performance of CaO in both catalytic NO reduction and carbonation. The Cu/Ce co-modified CaO contained the optimal Cu/Ce/Ca molar ratio of 1:5:100 possesses both NO removal and CO conversion efficiencies of above 99 %, along with CO 2 removal efficiency exceeding 88%. Microscopic analysis determines that the electron transfer between Cu and Ce facilitates the conversion of lattice oxygen into surface oxygen, mitigating the competition between CO 2 and CO for surface oxygen. Furthermore, density functional theory calculations demonstrate that CO/NO/CO 2 exhibits non-competitive adsorption behavior on Cu/Ce co-modified CaO. Consequently, Cu/Ce-modified CaO possesses superior catalysis for efficient NO reduction by CO at low CO:NO molar ratio in calcium looping process.
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2024
·Vol. 29
·期 10
·2349
·
IF 4.2
Ziwei Deng,Wei Liu,Junyuan Zhang,Shuli Bai,Changyu Liu,Mengchen Zhang,Chao Peng,Xiaolong Xu,Jianbo Jia
A Fe-Co dual-metal co-doped N containing the carbon composite (FeCo-HNC) was prepared by adjusting the ratio of iron to cobalt as well as the pyrolysis temperature with the assistance of functionalized silica template. Fe1Co-HNC, which was formed with 1D carbon nanotubes and 2D carbon nanosheets including a rich mesoporous structure, exhibited outstanding oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) catalytic activities. The ORR half-wave potential is 0.86 V (vs. reversible hydrogen electrode, RHE), and the OER overpotential is 0.76 V at 10 mA cm−2with the Fe1Co-HNC catalyst. It also displayed superior performance in zinc–air batteries. This method provides a promising strategy for the fabrication of efficient transition metal-based carbon catalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2024
·
IF 3.8
Zhenfei Wang,Congli Li,Lei Tang,Jiahui Yang,Qi Shi,Jinxiang Dong
Ni-MOF-74 is among the most promising candidates for CO adsorption due to its highest CO adsorption capacity. However, the feasibility of using Ni-MOF-74 in actual CO/N2 pressure swing adsorption (PSA) processing cannot be reliably inferred based solely on its adsorption capacity at normal temperature and pressure. Hence, we systematically studied its CO working capacity and regenerability at different test temperatures and pressure ranges by single-component static and binary-component dynamic (CO/N2, 50%/50% and 30%/70%, v/v) experiments. The static experiments preliminarily indicated an appropriate operating temperature of 100 °C with adsorption–desorption pressures in the range of 3.0–0.1 bar for the PSA process. The working capacity and regenerability of CO were evaluated as 3.41 mmol·g–1 and 66.21% (adsorption–desorption pressure: 3.0–0.1 bar, 100 °C). A higher temperature reduces the binding force between CO and Ni-MOF-74, so that more CO is desorbed, which leads to an increase in the working capacity and regenerability of CO. Furthermore, through CO/N2 binary-component dynamic breakthrough experiments, the optimal operating temperature and CO adsorption partial pressure for the PSA process were determined as 100 °C and 1.5 bar at a total desorption pressure of 0.2 bar. Typically, for a CO/N2 composition of 50%/50%, the CO working capacity and regenerability were 2.66 mmol·g–1 and 85.25% at 100 °C and a CO partial pressure of 1.5 bar (total CO adsorption pressure of 3.0 bar) at a total desorption pressure of 0.2 bar. These results may guide PSA process design and optimization for adsorbents with strong CO binding ability.
✓ 已验证
产品关联
DOI
高影响因子
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
·
2024
·
IF 4.4
Xianzhi Liu,Luyan Shen,Lin Zhou,Wencheng Wu,Guang Liang,Yunjie Zhao,Wenqi Wu
Developing co-amorphous systems is an attractive strategy to improve the dissolution rate of poorly water-soluble drugs. Various co-formers have been investigated. However, previous studies revealed that it is a challenge to develop satisfied acidic co-formers, e.g., acidic amino acids showed much poorer co-former properties than neutral and basic amino acids. Only a few acidic co-formers have been reported, such as aspartic acid , glutamic acid , and some other organic acids . Thus, this study aims to explore the possibility of adenosine monophosphate and adenosine diphosphate used as acidic co-formers. Mebendazole, celecoxib and tadalafil were used as the model drugs. The drug-co-former co-amorphous systems were prepared via ball milling and confirmed using XRPD. The dissolution study suggested that the solubility and dissolution rate of the drug-co-formers systems were increased significantly compared to the corresponding crystalline and amorphous drugs. The stability study revealed that using the two nucleotides as co-formers enhanced the physical stability of pure amorphous drugs. Molecular interactions were observed in MEB-co-former and TAD-co-former systems and positively affected the pharmaceutical performance of the investigated co-amorphous systems. In conclusion, the two nucleotides could be promising potential acidic co-formers for co-amorphous systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF SOLID STATE ELECTROCHEMISTRY
·
2014
·Vol. 18
·期 7
·2027-2033
·
IF 2.234
Chen Dongrui,Li Benzhen,Liao Youhao,Lan Hongwei,Lin Haibin,Xing Lidan,Wang Yating,Li Weishan
Three samples, LiNi 0.5 Mn 1.5 O 4 , LiNi 0.4 Mn 1.4 Co 0.2 O 4 , and LiNi 0.4 Mn 1.4 Cr 0.15 Co 0.05 O 4 , were prepared by sol–gel method and characterized by powder X-ray diffraction, Fourier transformed infrared spectroscope, scanning electron microscopy, Brunauer–Emmett–Teller surface area, four-probe resistance, cyclic voltammetry, electrochemical impedance spectroscopy, and charge–discharge test. It is found that the co-doped sample LiNi 0.4 Mn 1.4 Cr 0.15 Co 0.05 O 4 exhibits an improved performance compared with the Co-doped sample LiNi 0.4 Mn 1.4 Co 0.2 O 4 and the undoped sample LiNi 0.5 Mn 1.5 O 4 , especially at elevated temperature. At 25 °C, the discharge capacity of LiNi 0.4 Mn 1.4 Cr 0.15 Co 0.05 O 4 is 130 mAh g −1 at 0.1 C and 103 mAh g −1 at 10 C. At an elevated temperature (55 °C), its 1 C discharge capacity is 136 mAh g −1 and maintains 95.6 % of its initial capacity after 100 cycles. Compared with the reported results of LiNi 0.4 Mn 1.4 Co 0.2 O 4 and LiNi 0.475 Mn 1.475 Co 0.05 O 4 , the co-doped sample LiNi 0.4 Mn 1.4 Cr 0.15 Co 0.05 O 4 , with least content of Co, 0.05, possesses not only the high C-rate capacity but also the structural stability. The mechanism on the electrochemical performance improvement of LiNi 0.5 Mn 1.5 O 4 by the co-doping was discussed.
✓ 已验证
DOI
高影响因子
Nanomaterials
·
2021
·Vol. 11
·期 2
·261
·
IF 5.076
Wendi Zhang,Xiaoming Liu,Man Gao,Hong Shang,Xuanhe Liu
The oxygen reduction reaction (ORR) is a crucial step in fuel cells and metal-air batteries. It is necessary to expand the range of efficient non-precious ORR electrocatalysts on account of the low abundance and high cost of Pt/C catalysts. Herein, we synthesized crystalline cobalt-embedded N-doped carbon nanotubes (Co@CNTs-T) via facile carbonization of Co/Zn metal-organic frameworks (MOFs) with dicyandiamide at different temperatures (t = 600, 700, 800, 900 °C). Co@CNTs- 800 possessed excellent ORR activities in alkaline electrolytes with a half wave potential of 0.846 V vs. RHE (Reversible Hydrogen Electrode), which was comparable to Pt/C. This three-dimensional network, formed by Co@CNTs-T, facilitated electron migration and ion diffusion during the ORR process. The carbon shell surrounding the Co nanoparticles resulted in Co@CNTs-800 being stable as an electrocatalyst. This work provides a new strategy to design efficient and low-cost oxygen catalysts.Keywords:metal-organic frameworks;N-doped carbon;oxygen reduction reaction
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Nano Materials
·
2022
·
IF 6.14
Le Zhang,Xin Zhou,Shaohua Chai,Jian Guan,Guijun Fan,Wuxinchen Yang,Guojun Ma,Ning Han,Yunfa Chen
There is a high demand to synthesize ozone decomposition catalysts especially in high-space-velocity and high-relative-humidity (RH) environments. Herein, two polymorphs of cobalt hydroxide, α- and β-Co(OH)2, are synthesized and applied for ozone elimination. β-Co(OH)2 shows ∼90% ozone decomposition efficiency under high space velocity (weight hourly space velocity (WHSV) = 1,200,000 mL g–1 h–1, 25 °C, 40 ppm), which is far higher than that of α-Co(OH)2 (∼5%). β-Co(OH)2 has high spin Co(II) in distorted octahedral coordination caused by the Jahn-Teller effect, leading to a higher crystal field splitting energy level and thus contributing to the easier electron transfer between the ozone and catalyst. Moreover, β-Co(OH)2 still shows high performance (∼87%) even in humid conditions (RH ∼50%, 25 °C, 40 ppm, WHSV = 600,000 mL g–1 h–1), which is attributable to its abundant surface non-hydrogen-bonded hydroxyls weakening water molecule adsorption, providing an idea to develop highly efficient catalysts for ozone decomposition in humid environments.
✓ 已验证
DOI
高影响因子
Analytical Methods
·
2019
·Vol. 11
·期 13
·1811-1815
·
IF 2.378
Shiwei Liu,Liang Liang,Qixian Zhang,Changpeng Liu,Wei Xing,Xiandui Dong
In this report, a reductive-heat-treated platinum tungsten oxide catalyst was prepared to improve the CO electro-oxidation activity and employed in the electrochemical sensor. Tungsten oxide was proved to be an effective co-catalyst for CO sensing and the strong interaction between platinum and tungsten oxide has been enhanced by the reductive heat treatment. As a result, the significant negative shift of CO oxidation potential was confirmed by an electrochemical characterization. Further, the sensing performance of the as-prepared catalyst was investigated by means of the portable CO sensor device, which showed higher sensitivity, faster response time and good linearity within 50 ppm CO.
✓ 已验证
DOI
高影响因子
Advanced Powder Materials
·
2021
·
IF 0
Xingsheng Hu,Yan Li,Xinxin Wei,Lei Wang,Houde She,Jingwei Huang,Qizhao Wang
The cobalt−carbonate (CoCi)/NiFeOOH double-layer co-catalyst was prepared on bismuth vanadate (BiVO 4 ). Compared with the same type of electrode (Co−Pi/NiFeOOH/BiVO 4 and Co−Sil/NiFeOOH/BiVO 4 ), the photoelectrochemical (PEC) performance of the composite electrode presents the most excellent performance. The Co−Ci/NiFeOOH/BiVO 4 electrode prepared by photoelectric deposition (PED) achieves a photocurrent density of 4.1 mA/cm 2 at 1.23 V vs RHE, and the applied bias photon-current efficiency (ABPE) is up to 0.95%. In addition, with the help of the equivalent circuit fitting in electrochemical impedance spectroscopy (EIS), the charge transfer resistance ( R ct ) of Co−Ci/NiFeOOH/BiVO 4 is only 108.9 Ω, which is 16% that of BiVO 4 . The enhanced PEC performance of Co−Ci/NiFeOOH/BiVO 4 in the double-layer cocatalyst system is attributed to the outstanding advantages of Co−Ci cocatalyst in oxygen vacancy defects, superior to other cobalt-based catalysts in promoting charge transfer and improving the kinetics of water oxidation. This makes Co−Ci co-catalyst become one of the favorable competitors in the field of photoelectric catalysis.
✓ 已验证
DOI
JOURNAL OF ALLOYS AND COMPOUNDS
·
2019
·
IF 4.175
Baosong Li,Weiwei Zhang,Dandan Li
Ni–Co and Ni–Co/ZrO 2 composite coatings have been synthesized via a single-step direct current (DC) electrodeposition route as a protective coating. The influences of electrodeposition current density, time and ZrO 2 concentration on structural, composition and properties of Ni–Co coating were investigated. All coatings present compact, crack-free and nodular-like morphology in a nanocrystalline structure. Some aggregations still exist in the coating. The preferred orientation of these coatings changed from (200) to (111) texture with a fcc structure . The amount of Co in Ni–Co matrix slightly decreases as current density and time increases. The Co and ZrO 2 content in Ni–Co/ZrO 2 matrix increase with the increasing of ZrO 2 concentration in bath. Less than 60 min is beneficial for low roughness of Ni–Co/ZrO 2 coating. Current density, deposition time and ZrO 2 embedded in metallic matrix affect the hardness of Ni–Co alloy. Ni–Co/ZrO 2 coating has enhanced hardness compared to Ni–Co ones. Although they might not exhibit the best corrosion resistance in the initial immersing stage, Ni–Co/ZrO 2 composite coating obtained at 2 – 4 A dm −2 with 5–10 g L -1 ZrO 2 presents the better corrosion resistance and desirable performance stability during the long-term immersion process in aggressive media. The Ni–Co/ZrO 2 coating exhibits promising advantages as a protective coating.
✓ 已验证
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2012
·Vol. 19
·期 11
·1-7
·
IF 1.733
Yu Wei-Na,Liu Shou-Xin,Wang Hong-Mei,Tian Rong
Temperature-responsive P(NIPAM- co -HMAM)- b -PEO- b -P(NIPAM- co -HMAM) triblock copolymers were synthesized by an atomic transfer radical polymerization (ATRP) method without freeze–pump–thaw cycles. The composition, structure, and molecular weight of the synthesized block copolymer were characterized by 1 H NMR and GPC. The phase transitions induced by temperature for different copolymers in dilute aqueous solutions have been studied using transmittance measurements, laser particle size measurements, viscosity analysis, and surface tension measurement, which showed that the HMAM content and the PEO (or PEG) chain length in the synthesized triblock copolymer affects the copolymer’s lower critical solution temperature (LCST). The micellization behavior of each temperature-responsive triblock copolymer was investigated by fluorescence probe measurements and transmission electron microscopy (TEM), which showed that the triblock copolymers form stable micelles above the LCST. The introduction of the HMAM component and the formation of micelles represent the first steps in the development of an injectable gel that forms in situ through chemical and physical crosslinking.
✓ 已验证
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Shuya Rui,Na Liu,Lingwei Ren,Yang Liu,Zian Liu,Binghui Wu,Hua Pan,Zhiping Ye
Traditional Mn-Ce catalysts for selective catalytic reduction (SCR) of NO with CO (CO-SCR) in iron and steel flue gases are often hindered by competitive adsorption of NO and CO, which compromises catalytic efficiency. In this study, we present a Ni-doped Mn-Ce catalyst that overcomes these challenges, achieving 96 % NO conversion, 98 % N 2 selectivity, and 44 % CO conversion at 175 °C. Comprehensive characterization of the catalyst reveals that Ni doping significantly enhances Mn-Ce interactions, boosting oxygen vacancy density and promoting efficient redox cycling between Mn 3 + /Mn 4+ and Ce 3+ /Ce 4+ . Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) confirms preferential NO adsorption at oxygen vacancy sites, minimizing CO-NO competition and stabilizing the Langmuir-Hinshelwood mechanism, where both gases co-adsorb and react at oxygen-rich vacancies. Mechanistic insights suggest that Ni facilitates electron transfer, weakening the N–O bond in NO and accelerating its dissociation, resulting in faster NO reduction. This study establishes Ni doping as a promising strategy for improving the low-temperature performance of Mn-Ce-based CO-SCR catalysts, paving the way for more efficient catalytic systems.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）