DYES AND PIGMENTS
·
2023
·
IF 4.5
Fuhua Gao,Wasim Ullah Khan,Zhiyuan Cheng,Waheed Ullah Khan,Iqtidar Ahmad,Zhiqi Ye,Shenghong Yang,Yueli Zhang
Broadband near-infrared (NIR)-emitting materials have critical applications in biology, medical detection, and NIR night-vision. However, developing NIR phosphors with promising optical properties and excellent thermal stability is a great challenge for research. In this work, a novel NIR phosphor Cr 3+ and Yb 3+ doped CaSc 2 O 4 (CSO) is an evolving NIR emitting phosphor with decent optical properties , boosted emission intensity, and thermal stability that makes it a promising candidate with potential applications in NIR-LED and infrared night-vision. The implications of the fundamental electronic structure of CSO, including valence-band (VB) and conduction-band (CB) orbital character, are investigated. Under blue light excitation, CSO:Cr 3+ is settled with pure broadband NIR emissions (max = 920 nm, FWHM (full width at half maximum) = ∼310 nm) and good thermal stability . The occupation of two selectable lattice sites of Cr 3+ in CSO is discussed in detail. Furthermore, emission enhancements of samples are done by Cr 3+ and Yb 3+ codoping, effectively broadening FWHM to 351 nm and reducing thermal quenching. The energy transfer (ET) routes in CSO:Cr 3+ ,Yb 3+ are investigated based on PL lifetime and comprehensive kinetic ET model, revealing that the PL enhancements by Cr 3+ and Yb 3+ codoping mainly originate from the ET from Cr 3+ to Yb 3+ emitters with more efficient and thermally stable. Finally, an InGaN-LED device encapsulated using CSO:0.01Cr 3+ and CSO:0.01Cr 3+ ,0.01 Yb 3+ phosphor was fabricated. The fabricated NIR pc-LEDs are excellent candidates for NIR light sources in biological imaging and NIR night vision.
研究领域:
光学材料
·
生物医学成像
·
光电子学
·
无机发光材料
·
红外技术
·
固态照明
·
纳米生物技术
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2013
·
IF 2.112
Shisen Song,Yaojie Sun,Yandan Lin,Bo You
In this paper, we present a facile coating technique to fabricate the light diffusing film with hemispherical surface convex micro-structure. The coating was prepared by different ratio of light-diffusing particles (LDP)/polyacrylates composites via in situ radical polymerization, with the H 2 SO 4 and vinyl triethoxysilane (A-151) pretreatment made the LDP better dispersed and incorporated with polyacrylate polymer chains. When the mass ratio (LDP/polyacrylate) was 0.5, the film obtained the highest light-diffusing effect and more than 90% transmittance due to the formation of hemispherical surface convex micro-structure. The light diffusing films have excellent anti-glare property if applied to LED light system.
研究领域:
材料科学
·
光学工程
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry C
·
2015
·Vol. 3
·期 31
·8132-8141
·
IF 4.696
W. B. Dai,S. Ye,E. L. Li,P. Z. Zhuo,Q. Y. Zhang
Yellow-emitting phosphors activated by Ce3+ are key components of white light-emitting diodes (LEDs) based on the blue (Ga,In)N LED. The need to replace incandescent and/or halogen lamps with warm white LEDs has driven LED phosphor development toward compositions beyond the Ce3+-doped garnets used in cool white LED packages. In this contribution, for pointing out how chemical substitutions play a crucial role in tuning the optical properties, we investigate the structural and optical properties of oxyfluoride solid-solutions and borate phosphors, specifically the (La,Ca)3(Al,Si)O4(O,F):Ce3+ yellow-green phosphors and the Ca3La3(BO3)5:Eu3+ red phosphors, via a combination of density functional theory, synchrotron X-ray detection, pair-distribution-function analyses and spectroscopy measurements. By incorporating these phosphors with a new phosphor-capping method on InGaN light-emitting diodes, we obtain the warm white light that meets the spectral and efficiency requirements for high-efficacy solid state warm white lighting lamps. We believe that solid-solutions between distinct and structurally related phosphor systems can be a good strategy to broaden possibilities for using in warm white LED phosphors.
研究领域:
材料科学
·
光学工程
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2015
·
IF 7.435
Yaowen Gao,Zhuoyue Zhang,Simiao Li,Jin Liu,Linyu Yao,Yixi Li,Hui Zhang
Activation of persulfate (PS) by ultraviolet (UV) light or metal catalysts has been extensively studied, however, little is known about the activation of persulfate by clay-based catalysts in the presence of visible light-emitting diode (LED) irradiation. Herein, a novel kaolinite-supported iron oxide (K-Fe)/PS/Vis process for the degradation of Rhodamine B (RhB) from aqueous solution is reported. It was found that although persulfate can degrade RhB via a non-radical reaction, the excited RhB molecule (RhB * ) and the Fe(II) species formed on the catalyst surface can effectively activate persulfate to generate radicals which degrade RhB under visible light irradiation. On the basis of quenching experiments and electron paramagnetic resonance (EPR) studies, it is suggested that the free radicals produced from persulfate coupled with the surface-adsorbed radicals formed on the catalyst were responsible for the degradation of the dye via RhB * . Moreover, the K-Fe catalyst showed excellent reusability and stability with a low level of iron leaching. The findings of this work demonstrate a new pathway for activation of persulfate, which could effectively degrade organic pollutants and also provide some new insights into persulfate remediation of contaminated water.
研究领域:
环境科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Energy Materials
·
2025
·
IF 5.5
Dongheng Zhao,Qian Ma,Ying Sun,Lingyu Li,Huayushuo Zhang,Bolong Li,Zhiqiang Liu,Xiaomei Jiang
Zero-dimensional organic zinc halides have garnered significant attention as efficient and eco-friendly photoluminescent materials. However, its luminance efficiency, which is typically attributed to self-trapped excitons formed within zinc halide tetrahedra, often encounters a serious thermal quenching problem. This issue significantly limits its application in the field of solid-state lighting. Intriguingly, the incorporation of tetra-coordinated Mn2+ ions into these organic zinc halides can effectively mitigate unnecessary electron interactions and nonradiative energy transfer between Mn–Mn, achieving significantly improved photoluminescence quantum yield (PLQY) in the alloyed materials. In this work, a series of zero-dimensional Mn2+-alloyed 4-benzylpiperidinum zinc chloride hybrids were designed and synthesized by a solvent evaporation method. It is noteworthy that the pure zinc chloride shows a negligible visible emission at 510 nm, whereas (C12H12N)2MnxZn1–xCl4 (x = 0.25, 0.5, 0.75, 1) emits visible light ranging from green to yellow at room temperature. Incorporating Mn has led to a remarkable enhancement in PLQY, increasing from a mere 4.02% in the organic zinc halide to an impressive 94.45% in the (C12H12N)2Mn0.75Zn0.25Cl4. The white LED was successfully fabricated by employing the optimal sample as a single-component yellow phosphor coated on 450 nm chip. The correlated color temperature was determined to be 4770 K with a color rendering index as high as 91. It was also demonstrated with good luminous stability under different working currents. This research provides a straightforward approach for developing eco-friendly, cost-effective, and high-performance single-component yellow phosphors for white LED applications.
研究领域:
材料科学
·
光学工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
·
2021
·Vol. 104
·期 7
·3365-3375
·
IF 3.784
Jindi Wang,Shuai Huang,Yu Yan,Mengmeng Shang
In this work, using Ca 10.5 (PO 4 ) 7 as the structural model, a number of Eu 3+ -doped [Ca 9 Na 3x Y 1-x (PO 4 ) 7 (CNYP-I, 0 ≤ x ≤ 1/2) ← Ca 10.5 (PO 4 ) 7 → Ca 9+y Na 3/2-y/2 Y (1-y)/2 (PO 4 ) 7 (CNYP-II, 0 ≤ y ≤ 1)] phosphors were designed and synthesized through the heterovalent substitution of Y 3+ and Na + to Ca 2+ . The substitution mechanism, composition structure, luminescence performance, and thermal stability of Eu 3+ -doped CNYP-I (0 ≤ x ≤ 1/2) as well as the solid solutions of CNYP-II (0 ≤ y ≤ 1), were discussed in detail. The morphology and element composition of CNYP-I (0 ≤ x ≤ 1/2) and CNYP-II (0 ≤ y ≤ 1) solid solutions were analyzed by SEM and EDS. The PL spectra of the specimens were containing the predominant red peak of emission at 612 nm caused via the transition of 5 D 0 - 7 F 2 , indicating that Eu 3+ occupies the low-symmetry center. Moreover, the site symmetry Eu 3+ occupied changed with the x/y value. The luminous intensity of Eu 3+ -doped CNYP-I (0 ≤ x ≤ 1/2) and CNYP-II (0 ≤ y ≤ 1) phosphors at 150°C maintained about 60% of room temperature. The representative compound CNYP-I (x = 1/3) was used as the red phosphor to prepare a near-UV based white LEDs along with Ra of 80.9 and CCT of 4100 K.
研究领域:
材料科学
·
光学工程
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Tao Li,Amal Abdelhaleem,Wei Chu,Shengyan Pu,Fei Qi,Jing Zou
The degradation of pyrimethanil (PYR) was investigated through the activation of oxone by the S-TiO 2 (ST) photocatalyst under visible LED irradiation. The catalyst characterization revealed that the sulfur doping mechanism was based on the cation (S 6+ ) substitution of Ti 4+ in TiO 2 lattice. The optimal molar ratio of S/Ti at 0.25 was proven efficient in the PYR degradation. Influences of various reaction parameters including ST loading, oxone dosage, PYR concentration, and initial solution pH were examined. SO 4 •- , • OH, 1 O 2 , O 2 •- , and h + were found to be the reactive species generated in the ST/Oxone/Vis LED process. Different natural water constituents exerted dissimilar effects because of the generation of additional reactive species or their radical scavenging capabilities. Moreover, the reusability test indicates the ST photocatalyst is reusable and stable. A series of degradation intermediates was detected via four major degradation pathways. Overall, the ST/Oxone/Vis LED process was demonstrated to be a promising approach for the removal of organic pollutants.
研究领域:
环境科学
·
催化化学
✓ 已验证
DOI
高影响因子
Laser & Photonics Reviews
·
2025
·
IF 10
Zhiyu Yang,Guangxiang Lu,Jiani Ma,Tao Yang,Guotao Xiang,Li Li,Xianju Zhou,Zhiguo Xia
The rapid advancements in solid-state lighting have underscored the need for efficient and thermally stable phosphors for light-emitting diode (LED) applications. Herein, a red phosphor CaSc 2 O 4 :Eu 2+ ( λ ex = 450 nm, λ em = 650 nm) is synthesized employing a non-stoichiometric strategy to increase photoluminescence quantum efficiency (PLQY). Spectroscopic and crystallographic properties analysis confirm that the red emission band originates from Eu 2+ ions occupying a single Ca 2+ site with significant nephelauxetic effects and crystal field splitting. Excessive CaCO 3 additions promote the reduction of Eu 3+ and an increase of trap concentration, enhancing the PLQY from 24% to 61% and improving the emission intensities at 150 °C from 8% to 41% of that at room temperature. Versatile LED light sources, including high-quality white LED, red LED in plant growth, and the integrated pixelated intelligent LED matrices have been explored for the practical applications. This study proposes an optimized strategy to enhance the efficiency and thermal stability of Eu 2+ -doped oxide-based red phosphors for multifunctional lighting applications.
研究领域:
材料科学
·
固体照明
·
发光材料
·
无机化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2025
·
IF 3.5
Wei Zhu,Jialing Zhou,Feifei Huang,Renguang Ye,Youjie Hua,Shiqing Xu
The color rendering index (CRI) of white light-emitting diodes (LEDs) is very important for lighting quality. Currently, high-CRI white LEDs are typically fabricated by combining multiple-color phosphors. Therefore, the realization of multipeak-emission phosphors in a single phosphor is valuable. The Sr 2 LiAlO 4 : Eu 2+ phosphor exhibits an obvious double-peak emission in the yellow-green spectral range and has excellent luminescence properties , suggesting its potential application in white LEDs. In this study, a series of Sr 2 LiAlO 4-1.5 x N x : Eu 2+ ( x = 0–0.7) phosphors were successfully synthesized by introducing N 3− ions to replace O 2− ions. The luminescence intensity was significantly enhanced by increasing the N 3− concentration. Upon reaching a concentration of 0.7, the intensity of the yellow emission exceeded that of the green emission, indicating a shift in emission color from green to yellow. The emission peak of the Sr 2 LiAlO 2.95 N 0.7 : Eu 2+ phosphor is at 568 nm, which exhibited broader yellow light emission. Finally, Sr 2 LiAlO 2.95 N 0.7 : Eu 2+ was fabricated with a CaAlSiN 3 : Eu 2+ red phosphor on 450 nm blue LED chips. The fabricated white LEDs was observed to be white light with a high CRI of 92.1 and an adjustable color temperature (4938-6665k), showing its potential application in white LEDs.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2020
·
IF 3.28
Bingxin Xie,Lei Lei,Enyang Liu,Gongxun Bai,Renguang Ye,Shiqing Xu
Novel blue LED excitable Ce 3+ -doped alkaline-earth sulfide nanocrystals are exploited for selective and sensitive Fe 3+ ions sensing in this work. The detection limit is calculated to be as low as 92.5 nM, which is better than most previous ultra-violet light excited fluorescence probes. The decreased radiative probability of the Ce 3+ : 5d by the NC surface environmental variation activates the sensing capability.
研究领域:
材料科学
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2024
·
IF 5.8
Zongliang Xiao,Weizhen Liu,Gan Wan,Jianlei Liu,Lu Yu,Qian Zhang,Lei Han
The quest for advanced full-spectrum lighting technologies has driven the development of W-LEDs, while challenges remain in finding effective cyan emitters and ensuring outstanding thermostability. This study detailed the synthesis of the europium-doped CaO-Al 2 O 3 -SiO 2 -YF 3 glass-ceramics (GCs), which demonstrated efficient cyan emission when irradiated by 419 nm light, with a spectacular internal quantum efficiency of up to 83.24 %, and outstanding thermal stability of 90.2 %@100℃ compared to room temperature intensity. In practical applications, this GC was integrated with a 420 nm LED chip, (Sr, Ca)AlSiN 3 : Eu 2+ red and Y 3 Al 5 O 12 : Ce 3+ yellow phosphor in a prototype full-spectrum W-LED device. The device achieved an excellent color rendering index (94), appropriate chromaticity coordinates (0.3789, 0.3950), and a well-defined correlated color temperature (4163 K). This study not only advances the application of GCs within W-LED technology but also reveals their potential in driving energy-saving and eco-friendly lighting solutions, thus providing a path to achieve superior full-spectrum lighting technology.
研究领域:
材料科学
·
光学工程
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2017
·
IF 4.162
Yan Xiong,Jun Tan,Shenwen Fang,Chengjie Wang,Qing Wang,Jiayi Wu,Jie Chen,Ming Duan
In this work, a colorimetric methodology was developed for free chlorine determination by constructing a fiber-optic sensor (FOS) which was designed by using a small LED as light source and two silica fibers as light transmission elements. Then the FOS was integrated with the sequential injection lab-on-valve (SI-LOV) manifold to fabricate a FOS-SI-LOV system for free chlorine detection. The colorimetric determination was based on the reaction between N , N -diethyl- p -phenylenediamine (DPD) reagent and free chlorine, which would produce a chromophore showing maximum absorbance at 511 and 551 nm and detected by a micro spectrometer detector. By choosing a green LED with emission wavelength at 520 nm as light source, the chlorine concentration could be simply evaluated according to Beer's law. The developed FOS-SI-LOV system showed improved performances of wide linear range (10–400 μg L −1 ), low detection limit (3.5 μg L −1 , 3σ), fast analysis (6.85 s) and excellent repeatability (0.0083 RSD, n=8) for chlorine determination. The proposed FOS-SI-LOV system has been applied to on-line and real-time chlorine determination in different water samples with excellent selectivity. Furthermore, this FOS-SI-LOV methodology provided a colorimetric and fluorescence detection platform for other hazardous species monitoring in water environment based on Beer's law and Stern-Volmer relationship, respectively.
研究领域:
分析化学
·
环境科学
✓ 已验证
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）