NEW JOURNAL OF CHEMISTRY
·
2024
·Vol. 48
·期 26
·11776-11782
·
IF 2.7
Yuwei Yan,Hongyan Li,Songnan Li,Jiawei Zhang,Jingxiang Zhao,Qinghai Cai
Copper, iron–chloride ionic liquids (ILs) were immobilized on SBA-15 via N-methylimidazole grafting with C–Cl in chloropropylsilane pre-anchored on SBA-15, followed by FeCl3 and CuCl2 coordination to imidazolium chloride to generate a double metal IL-supported mesoporous composite (SIL-CuFe). The prepared composite exhibited an effective catalytic performance for the solvent-free oxidation of styrene to benzaldehdye (BzH) with H2O2 oxidant, offering 51% conversion, a turnover number (TON) of 330.5 mol molFe+Cu−1, and a selectivity of 71% at a reaction temperature of 70 °C. The composite catalyst can be easily recovered and effectively reused without a significant loss in activity and selectivity. The quenching experiments by adding tert-butanol (TBA), 1,4-benzoquinone (p-BQ) and L-histidine (L-HIS) in the reaction system were conducted to identify the type of reactive O species, specifically ˙OH, ˙O2−, and 1O2, produced by catalyst activation with H2O2 and played a main role in the oxidation. The reaction mechanism of the oxidation process is also proposed.
研究领域:
化学工程
·
催化材料
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2012
·
IF 2.103
Zhengji Chen,Li Zhou,Faai Zhang,Chuanbai Yu,Zhibo Wei
The aim of the present work was to investigate the potential of multicarboxylic hyperbranched polyglycerol (HPG) modified mesoporous SBA-15 (SBA/HPG-COOH) as adsorbent for the removal of cationic dyes or/and heavy metal ions from aqueous media. The SBA/HPG-COOH adsorbents can be facilely synthesized through two steps: in situ anionic ring-opening polymerization of glycidol and further modification of hydroxyl groups by succinic anhydride. The resulting SBA/HPG-COOH was characterized by means of FTIR, TGA, XRD, SEM and nitrogen adsorption–desorption isotherms. The results demonstrate that the SBA/HPG-COOH was successfully synthesized and the density of carboxylic groups on the SBA/HPG-COOH is calculated to be as high as 1.5 mmol/g, posing a powerful base for adsorbing cationic adsorbates. Four kinds of dyes and copper ions were chosen as representatives to investigate the adsorption ability of SBA/HPG-COOH. The SBA/HPG-COOH adsorbent showed quick adsorption rate, high adsorption capacity (e.g., its saturated adsorption capacity for methylene blue (MB) can reach 0.50 mmol/g, while for unmodified SBA-15 is lower than 0.05 mmol/g), and high selectivity for cationic adsorbates. The fitness of Langmuir adsorption model and pseudo second-order kinetics on describing the adsorption isotherm and kinetics of SBA/HPG-COOH for MB dye was examined, respectively. It is believed that this robust SBA/HPG-COOH adsorbent will find important application in removal of cationic adsorbates from aqueous solution.
研究领域:
材料科学
·
环境科学
✓ 已验证
DOI
高影响因子
ENERGY & FUELS
·
2016
·
IF 2.835
Fan Wang,Liang Jiang,Junmei Wang,Zehui Zhang
In this study, the mesporous SBA-15 was prepared and used to graft biimidazole groups, which were used to anchor Ru3+ to give rise to a new ruthenium catalyst (SBA-15-Biimidazole-Ru). The structure of the SBA-15-Biimidazole-Ru catalyst was well characterized and used for the aerobic oxidation of 5-hydroxymethylfurfural (HMF) into 2,5-diformylfuran (DFF). Several important parameters were studied and found that the reaction solvent and oxygen pressure showed a crucial role in the activity of the as-prepared SBA-15-Biimidazole-Ru catalyst. HMF conversion of 96.9% and DFF yield of 88.7% were achieved after 11 h at 110 °C under 15 bar oxygen pressure. One important characteristic of the SBA-15-Biimidazole-Ru catalyst is that it was very stable without loss of its catalytic activity during the recycling experiments, which was due to the strong interaction between the Ru3+ and the Biimidazole groups on the surface of SBA-15. Finally, the direct conversion of fructose into DFF was also performed by the use of Amberlyst 15 and SBA-15-Biimidazole-Ru as two binary catalysts. The dehydration of fructose over Amberlyst 15 catalyst and the subsequent oxidation of HMF over SBA-15-Biimidazole-Ru catalyst afforded DFF with an overall yield of 72.4%.
研究领域:
化学工程
·
催化科学
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2018
·
IF 3.649
Qingqing Ma,Nan Wang,Guozhu Liu,Li Wang
Pd catalysts on mesoporous silica SBA-15 functionalized with alkyltriethoxysilane (alkyl = methyl, ethyl, propyl and isobutyl) were prepared. The effects of grafting sequence on the grafting amount were studied. The catalysts were characterized by XRD , FT-IR, elemental analysis , thermogravimetric analysis , nitrogen adsorption-desorption, TEM and XPS , and evaluated using catalytic hydrogenation of 2-ethyl-anthraquinone. The grafting amount increases with increasing the alkyl chain length of alkyltriethoxysilane. The highest grafting amount with the carbon content of 1.56% is obtained using an ante-grafting procedure where the grafting is performed prior to the removal of template, and this catalyst shows the highest activity and selectivity (98.3%). The accordant relationship between the activity of Pd/SBA-15 catalysts and their grafting amount indicates a positive effect of hydrophobicity of SBA-15 created by grafting on the catalytic hydrogenation of 2-ethyl-anthraquinone.
研究领域:
催化化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
·
2011
·Vol. 110
·期 3
·1437-1442
·
IF 1.752
Lan X. Z.,Pei H. R.,Yan X.,Liu W. B.
Phase behavior of dodecane–tetradecane ( n -C 12 H 26 –C 14 H 30 , n -C 12 –C 14 ) binary system in bulk and confined in SBA-15 (pore diameters 8 nm; 15.9 nm) has been investigated by differential scanning calorimetry and transmission electron microscopy. The bulk system possesses some special phases relating to the rotator phase in normal alkanes. Dodecane–tetradecane mixtures confined in SBA-15 (8 nm) are a system miscible both in solid and liquid states with a phase diagram of a smooth curve. Dodecane–tetradecane system confined in SBA-15 (15.9 nm) exhibits not only solid–liquid (s–l) in all compositions but solid–solid transition in mole fractions of tetradecane 0.1–0.6, which forms a phase diagram of “loop line” shape. Melting temperatures of n -C 12 –C 14 /SBA-15 (8 nm) are lower than those of n -C 12 –C 14 /SBA-15 (15.9 nm) in all mole fractions. The evolution of the phase diagram of n -C 12 –C 14 confined in 8 nm, 15.9 nm pore sizes of SBA-15 and in bulk, respectively, shows a dramatic effect of confinement on phase behavior of normal alkane mixtures. The s–l phase boundary lines of n -C 12 –C 14 /SBA-15 (8, 15.9 nm) are fitted as \( T_{\text{m,r}}^{x} \) being [ \( xT_{{\text{m} ,r}}^{A} + \left( {1 - x} \right)T_{\text{m,r}}^{B} - D \) ], where D is a polynomial ∑ a
i
x
i , i = 1, 2,···, n ( A = C 14 , B = C 12 ).
研究领域:
物理化学
·
材料科学
·
纳米限域效应
·
热分析
·
软物质物理
✓ 已验证
DOI
高影响因子
CATALYSIS TODAY
·
2012
·
IF 3.407
Weiguo Cheng,Xi Chen,Jian Sun,Jinquan Wang,Suojiang Zhang
A series of molecular sieve SBA-15 supported 1,2,4-triazolium-based ionic liquids (TRILs) were synthesized and employed as efficient catalysts for the synthesis of cyclic carbonates from CO 2 and epoxides. The effects of various parameters, such as functional groups, anions of the catalysts, reaction temperature, pressure, reaction time, and the amount of catalyst used, on the reaction were investigated systematically. In addition, the catalyst can be easily recovered by filtration and reused over six times without loss of catalytic activity. It was found that high yield (80–99%) and excellent selectivity (97–99%) of cyclic carbonates could be achieved at mild conditions (2.0 MPa, 110 °C and 2 h) without additional organic solvents or co-catalysts.
研究领域:
化学工程
·
催化材料
✓ 已验证
DOI
高影响因子
CATALYSIS LETTERS
·
2021
·Vol. 151
·期 9
·2513-2526
·
IF 3.186
Cui Kai,Qian Wei,Shao Zhengjiang,Zhao Xiuge,Gong Honghui,Wei Xinjia,Wang Jiajia,Chen Manyu,Cao Xiaoming,Hou Zhenshan
Furfural (FFR) is one of the most important biomass-derived chemicals. Its large-scale availability calls for the exploration of new transformation methods for further valorization. Herein, we demonstrate that Ru nanoparticles (Ru NPs)-supported on a sulfonated carbon layer coated SBA-15 can be employed as an efficient bi-functional catalyst for one step conversion of FFR into 1,4-pentanediol (1,4-PeDO). The optimum bi-functional catalyst can afford the full the conversion of FFR and 86% selectivity to 1,4-PeDO. The catalysts have been characterized thoroughly by using a complementary combination of powder X-ray diffraction, N 2 adsorption–desorption, scanning/transmission electron microscopy, Fourier transform infrared spectroscopy, elemental analysis, and X-ray photoelectron spectroscopy. The characterization revealed that acidic groups (–SO 3 H) have been introduced on the surface of the carbon layer coated SBA-15 support after sulfonation with 98% H 2 SO 4 and the surface acidity can be tuned facilely by the sulfonating time. Meantime, Ru(0) sites was highly dispersed via an impregnation and sequential reduction and directly adjacent to the surface –SO 3 H group. There existed an electronic interaction between Ru(0) sites and sulfonic groups, in which the electronic transfer from sulfonic sites to Ru(0) sites occurred. Brönsted acid sites (–SO 3 H) have a significant influence on the FFR conversion and the selectivity to 1,4-PeDO. The ordered mesoporous structure, the appropriate density of acid sites and the electron-rich Ru(0) sites accounted for the the excellent performance of the catalyst for an efficient production of 1,4-PeDO from FFR. Graphic Abstract
研究领域:
催化化学
·
生物质转化
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2025
·
IF 4.6
Xinyu Wang,Maofei Zhang,Yuzhi Zhang,Rui Sun,Binghao Wang,Jiayu Ma,Hongyu Gu,Lingnan Wu,Lixin Song
Optimizing high solar reflectance and infrared radiation in composites faces challenges like optical imbalance and instability. This study used efficient impregnation to uniformly disperse ZrO₂ onto ordered mesoporous SBA-15. First-principles calculations revealed robust covalent bonds and charge redistribution at the ZrO₂/SBA-15 interface, yielding exceptional stability (adhesion energy: 1.91 J/m 2 ). This multi-interface structure significantly enhanced optical and thermal radiation properties. With 10 wt% Zr loading, the composite pigment achieved ultra-high solar reflectance (96.8 %, 0.3–2.5 μm) and hemispherical emissivity (0.98, 8–13 μm). The work clarifies the link between atomic-scale interface interactions and macroscopic optical/thermal properties, providing foundational insights for designing stable, high-performance composites for optical and thermal management.
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2024
·
IF 4.8
Yifan Chen,Zibo Zhang,Hailing Fan,Le Pan,Lu Jin
Antibiotic resistance and the high infectivity of bacteria pose an increasingly threat to human health. Mesoporous silica supporting metal-based nanoparticles are considered an effective strategy to fight bacterial infections. In this work, the short channeled mesoporous Zr-SBA-15 (SBA-S) material is synthesized by sol-gel method using ZrOCl 2 ·8H 2 O as an additive. Nanoparticles based on four types of copper species, Cu, Cu 2 O, CuO, and CuSO 4 , are successfully prepared, forming the Cu-loaded SBA-S materials. The composite structures are comprehensively characterized by SEM, TEM, XRD , XPS , UV–Vis DRS, FTIR, ICP , TG, and BET analysis. It turns out that all structures maintain the arrays of highly ordered pore channels, high specific surface area (SSA, ≥500 m 2 g −1 ), and narrow width of pore size (∼7 nm). The release of Cu 2+ ions shows the order is CuSO 4 /SBA-S > CuO/SBA-S > Cu 2 O/SBA-S > Cu/SBA-S. Antibacterial activity assay indicates that CuO/SBA-S shows 1.25 and 0.62 mg mL −1 of the minimum bactericidal concentration (MBC) values against E. coli and S. aureus . The acting mechanism would include the free Cu 2+ ions and the nanoparticle-induced reactive oxygen species (ROS). We propose that the cheap CuO/SBA-S material would be a promising antibacterial agent with the good antibacterial activity.
研究领域:
材料科学
·
微生物学
·
医学
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Qinya Huang,Zhiwei Ding,Haoran Lu,Maoxiang Geng,Jinhua Liu,Minjia Meng,Zhanchao Liu,Yan Liu,Jianming Pan
Novel 3D mesoporous silica SBA-15 and 2D graphene oxide (GO) composite nano-fillers incorporated polysulfone (PSf) ultrafiltration (UF) membranes (GO-SBA-15/PSf) were first prepared via blending modifications by non-solvent induced phase separation (NIPs). 3D honeycomb-like SBA-15 not only improved the surface hydrophilicity but also provided extra nano-channels parceled in 2D GO networks for convenient hydrone transport via confinement-effect. The lamellar GO networks relieved the agglomeration of inorganic materials inside the polymer, anticipating in the interfacial polymerization reaction. GO-SBA-15/PSf UF membranes were systematically investigated using contact angle, scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscope (AFM) and Brunauer-Emmett-Teller (BET) methods. The pure water flux reached 641.7 L m -2 h −1 which was 3 times than that of pristine PSf membranes (229.2 L m -2 h −1 ) under the pressure of 0.1 MPa. Negative charge of GO generated electrostatic repulsion with protein, which facilitated a high rejection of 98.22% and excellent FRR value of 85% that was 1.5 times than that of pristine PSf membranes (58%). The UF membranes fabricated by new multidimensional nano-fillers overcame the trade-off effect between permeability and protein rejection.
研究领域:
材料科学
·
环境工程
·
膜技术
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2018
·Vol. 8
·期 13
·7179-7185
·
IF 2.936
Ruiyun Li,Heyuan Song,Guoqin Wang,Jing Chen
Ketalization of cyclohexanone with glycol has been carried out using molecular sieve SBA-15 immobilized Brønsted acidic ionic liquid catalyst. The properties of the heterogeneous catalysts were characterized by elemental analysis, Fourier transform infrared (FT-IR) spectra, scanning electron microscopy (SEM), thermogravimetry/differential scanning calorimetry (TG/DSC), and N2 adsorption–desorption (BET). The results suggested that Brønsted acidic ionic liquid [BSmim][HSO4] had been successfully immobilized on the surface of SBA-15 and the catalytic performance evaluation demonstrated that the catalyst BAIL@SBA-15 exhibited excellent catalytic activities in the ketalization of cyclohexanone with glycol. In addition, the effects of reaction temperature, catalyst loading, reaction time, and reactant molar ratio have also been investigated in detail, and a general reaction mechanism for the ketalization of cyclohexanone with glycol was given. The SBA-15 immobilized ionic liquid can be recovered easily and after reusing for 5 times in the ketalization reaction, the catalyst could still give satisfactory catalytic activity.
研究领域:
化学工程
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMER COMPOSITES
·
2016
·
IF 2.004
Chuanbai Yu,Man Gao,Jinwei Feng,Yuanli Liu,Jian Lv,Hongxia Liu,Chun Wei
Mesoporous silica SBA-15/phenolic resin hybrid materials (SBA-15/PF) were fabricated through in situ polymerization of phenol and formaldehyde in the presence of SBA-15 and subsequent SBA-15/PF nanocomposites were prepared by compression moldings. The results revealed that the glass transition temperatures and thermal stability of SBA-15/PF hybrid materials were obviously enhanced compared to pure PF. In addition, the dynamic mechanical and friction properties of SBA-15/PF nanocomposites were improved remarkably. For SBA-15/PF nanocomposites containing 5.0 wt% of SBA-15, the glass transition temperature of the nanocomposite increased by 13.0°C. Moreover, the nanocomposite showed stable friction coefficient and decreased wear rate. The wear mechanism was a combination of adhesive wear and abrasive wear for PF/SBA-15 nanocomposites, while for pure PF friction material was a combination of adhesive wear and fatigue wear. POLYM. COMPOS., 38:E351–E358, 2017. © 2016 Society of Plastics Engineers
研究领域:
材料科学
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子