Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Zhuoyue Liu,Ke Wang,Danyang Li,Zhenxin Wang,Shengjiong Yang,Heliang Pang,Gen Wang,Dahu Ding,Delu Miao
Mesoporous carbon materials are promising catalysts for peroxydisulfate (PDS) activation for degrading aqueous organic pollutants but limited by the intrinsic inertness. Herein, co-doping of iron and nitrogen into the mesoporous carbon framework was performed via thermal conversion of metal-polyphenol coordination polymers (Fe-TA) to synthesize Fe/N co-doped mesoporous carbon for efficient PDS activation. Owing to the large surface area, high graphitization degree and defective configurations, the Fe/N co-doped mesoporous carbon (Fe/N-MCs) exhibited superior catalytic performance toward the degradation of organic pollutants . Electron paramagnetic resonance tests, chemical quenching experiments, electrochemical analysis and spectra measurements revealed that the degradation of organic pollutants over the Fe/N-MCs followed a nonradical oxidation pathway based on electron transfer process. Graphite nitrogen and hydroxyl (C-OH) groups on the defective edges of Fe/N-MCs were proved to be possible active sites for PDS activation. PDS catalyzed by the Fe/N-MCs exhibited strong anti-interference capability to surrounding inorganic ions (such as Cl – , CO 3 2– , NO 3 – and SO 4 2– ) and natural organic matters, making it a promising candidate for the degradation of organic pollutants. This work provides a new prospect for developing highly active mesoporous carbon materials via heteroatom doping for PDS activation for wastewater decontamination .
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Environmental Research and Public Health
·
2022
·Vol. 19
·期 22
·14835
·
IF 4.614
Jinkai Shu,Bozhi Ren,Wei Zhang,An Wang,Sen Lu,Shuyu Liu
Modified Shell Powder/La-Fe-TiO2(La-Fe-TiO2@MSP) composites were fabricated using the sol-gel method and characterized by SEM, XRD, UV-vis DRS and photocurrent techniques, and their physicochemical and optical properties were analyzed. The effects of various factors on the photocatalytic degradation of pyridine and its reaction kinetics were investigated by batch experiments using pyridine, a typical nitrogen-containing heterocyclic compound in coal chemical wastewater, as the target removal species. The pyridine degradation rate of 80.23% was obtained for 800 mg/L composite solution by photocatalytic oxidation of 50 mg/L pyridine wastewater for 180 min at 35 °C, pH = 8 and light intensity of 560 W. The photocatalytic degradation performance was optimal. The quenching experiments determined that the active species of photodegradation were mainly hole and hydroxyl radicals, and the photocatalytic degradation mechanism was analyzed in this way.Keywords:La-Fe-TiO2@MSP;photocatalysis;pyridine;reaction kinetics
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Wenjing Zhao,Peng Wang,Fan Zhang,Yinshen Liu,Xuan Jin,Shijun Yuan,Qi Fan,Xing Guo,Qingyu Xu
Cation-disordered rock-salt cathodes have attracted extensive attention due to their high capacity and energy density . However, the excessive redox reaction of O 2- causes a severe impairment of Ni capacity and the release of O 2 , leading to the poor cycle stability and voltage decay for Li-Ni-Nb-O cathodes. In our work, the oxyfluoride compounds Li 1.23 Ni 0.3 Nb x Fe y O 2- z F z with various doping concentrations of Fe and F are successfully synthesized by solid state reaction using high-energy ball milling. Apart from observing the plateau at around 4 V with the redox reaction of Ni, a new plateau at approximately 2.6 V is observed due to the redox reaction of Fe. The doping of Fe on Nb increases the discharge capability and the co-doping of F on O further improves cycle stability. With the optimized doping amount of Fe ( y = 0.16) and F ( z = 0.15), Li 1.23 Ni 0.3 Nb 0.30 Fe 0.16 O 0.85 F 0.15 can deliver a discharge capacity of 347.1 mAh/g at a current density of 20 mA/g after the activation process in subsequent cycles. After 20 cycles at 20 mA/g, the capacity retention is 181.6 mAh/g, and after 100 cycles at 50 mA/g, the discharge capacity remains 102.2 mAh/g.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2023
·
IF 7.2
Xiaorui Yu,Lixin Chen,Liuyu Jia,Lizhi Feng,Liu Yang,Jing Li,Baodan Liu
Green hydrogen production from electrochemical water splitting currently suffers from the key issues of high energy consumption and cost. Herein, we demonstrated the synthesis of highly efficient and stable clustered CoP nanowires electrocatalysts on nickel foam. Moreover, an ion exchange strategy was proposed to precisely control the doping content of iron to further modify the intrinsic electrochemical activity of CoP nanowires. The introduction of iron effectively alters the surface atomic configuration and electronic structure of CoP and increases the active sites, thus accelerating the overall reaction rate and enhancing the catalytic performance. It has been demonstrated that the CoFeP-30-30/NF electrode exhibits platinum-like catalytic activity with only an overpotential of 29.8 mV at 10 mA·cm −2 and outstanding stability toward hydrogen evolution reaction . The synthetic strategy of CoFeP/NF electrode proposed in this work will significantly promote the development of highly efficient transition metal phosphides electrocatalysts with lower overpotential and better stability.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Jie Zhao,Yunning Chen,Renquan Guan,Xueying Cheng,Zhengkai Wu,Nana Zhao,Qingkun Shang,Yingnan Sun
In this paper, we successfully constructed two composite photocatalysts TiO 2 @PDI-NapSO 3 H and Fe-TiO 2 @PDI-NapSO 3 H by utilizing water-soluble PDI derivatives to bond with TiO 2 or iron-doped TiO 2 . Their photocatalytic performance to degrade phenol and diclofenac sodium (DCF) under visible light were investigated. The results show that PDI-NapSO 3 H can effectively improve the optical absorption properties of TiO 2 . Furthermore, the oxygen vacancy produced by doping of Fe in TiO 2 prevents the recombination of photogenerated carriers effectively. The larger conjugate plane of PDI-NapSO 3 H provides a convenient channel for the migration and separation of photogenerated carriers. Thus almost 99 % of phenol or DCF can be degraded by Fe-TiO 2 @PDI-NapSO 3 H within 90 or 120 min, respectively. However, the photocatalytic activity of Fe-TiO 2 @PDI-NapSO 3 H is better. The rate of phenol degradation is much higher than that of TiO 2 @PDI-NapSO 3 H. Further, through the photoelectric response characteristic analysis, radical trapping experiment and EPR test, the effects mechanism of the energy band structure, photogenerated carrier separation efficiency on the photocatalytic performance of Fe-TiO 2 @PDI-NapSO 3 H were discussed. In addition, the possible degradation pathways of DCF and the reasons for the obvious reduction of environmental toxicity after photocatalytic degradation were proposed.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Meng Cheng,Junhao Liu,Hao Jiang,Chunling Li,Shuangqing Sun,Songqing Hu
In view of the critical importance of oxygen to corrosion evolution, to starve corrosion via depleting oxygen in coatings is a promising strategy. In this work, a novel nanocatalytic anticorrosion concept is proposed to design new coating with outstanding corrosion resistance . Different from the passive barrier of traditional coatings and self-repair after corrosion of current stimuli-feedback coatings, such coating could spontaneously eliminate internal diffused oxygen and greatly suppress the corrosion process. As a proof of concept, single-atom Fe-N-C electrocatalyst with isolated FeN 4 active sites is synthesized by a simple confined carbonization method, exhibiting excellent oxygen reduction performance (E 1/2 = 0.902 V). In composite coating , the evenly dispersed Fe-N-C compensates for the coating defects and serves as oxygen scavengers, which could actively adsorb and consume ambient oxygen, thereby preventing oxygen penetration to the metal substrate surface, eliminating the oxygen contribution to corrosion and significantly boosting the anticorrosion performance of epoxy coating. This in-situ mediation for oxygen in coating prevents metal substrate from receiving new supply of oxygen, while imparting active anticorrosion property to the coating.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Wenjuan Wang,Yanfang Huang,Junpeng Zuo,Lulu Kou,Bingbing Liu,Hu Sun,Guihong Han
Microfine metal–organic frameworks (MOFs) are promising adsorbents for water treatment, but their commercial applicability is severely constrained by poor separability. Herein, we designed a feasible bubble flotation strategy for achieving the effective separation of oxyanions-loaded Fe-MOF particles in the solution after adsorption, by modifying the particle interface properties and introducing bubbles mineralization. The results showed that the separation of P(V), Mo(VI) and W(VI) oxyanions-loaded Fe-MOF could be completely achieved under optimum conditions. FTIR, XPS and DFT analyses revealed that the particle size and hydrophobicity of oxyanions-loaded Fe-MOF increased by sodium dodecyl sulfate (SDS) collector via chemisorption and electrostatic interactions. The collision and attachment models analysis of bubbles with particles demonstrated that the separation efficiencies of collector modified oxyanions-loaded Fe-MOFs were significantly enhanced with increasing bubble mineralization. EDLVO theoretical calculations and bubble-particle carrying ability analysis demonstrated that the gravitational interactions between oxyanions-loaded Fe-MOF particles and particles/bubbles were intensified by the collector. The gravitational interaction further induced particle aggregation and enhanced the carrying capacity of individual bubbles. This work provides a feasible strategy for the removal of oxyanions and the separation of oxyanions-loaded microfine Fe-MOF in the adsorption process.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Chemistry
·
2022
·
IF 13.599
Chenguang Wang,Chengyan Wen,Zheng Liang,Zhipeng Tian,Qian Jiang,Yuhe Liao,Xunzhu Jiang,Lungang Chen,Qiying Liu,Longlong Ma,Michiel Dusselier
Direct conversion of syngas to aromatics has great potential to decrease fossil fuel dependence. Here, a unique structured hybrid catalyst composed of Fe 3 O 4 nanoparticles intimately dispersed inside an acidic zeolite is developed. 1 to 4 nm sized Fe 3 O 4 nanoparticles end up evenly dispersed in an acidic and slightly mesoporous Al-ZSM-5 based on Fe 3 O 4 restructuring during co-hydrothermal synthesis using organosilane modification. A very high aromatic productivity of 214 mmol aromatics h −1 g Fe −1 can be obtained with a remarkable 62% aromatic selectivity in hydrocarbons. This catalyst has excellent sintering resistance ability and maintains stable aromatics production over 570 h. The synthetic insights that postulate a mechanism for the metastable oxide-zeolite reorganization during hydrothermal synthesis could serve as a generic route to sinter-resistant oxide-zeolite composite materials with uniform, well-dispersed oxide nanoparticles in close intimacy with - and partially confined in - a zeolite matrix.
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 9
·2887-2897
·
IF 4
Zhifeng He,Xin Cui,Guangping Lei,Zeyi Liu,Xiaoyang Yang,Yifu Liu,Jiafeng Wan,Fangwei Ma
Molybdenum (Mo) is one of the most important constituent elements in natural nitrogenase and theoretical calculation results show that Mo-based materials can be used as potential NRR electrocatalysts. The design of advanced catalysts with a special structure is very essential for promoting the development of electrocatalytic N2 into NH3. In this paper, Fe-doped MoO2/C heterostructured nanoparticles with rich oxygen vacancies (Vo) are designed and they exhibit highly efficient catalytic activity for artificial N2 fixation in neutral electrolytes under ambient conditions. The influence of the atomic ratio of the Fe source to the Mo source and the NaBH4 ethanol solution treatment on the structure and electrocatalytic performance are systematically investigated. The Vo-Fe–MoO2/C (1 : 50) catalyst with rich oxygen vacancies shows a satisfactory electrocatalytic N2 reduction reaction (e-NRR) activity in 0.1 M Na2SO4 with a high ammonia yield rate of 15.87 ± 0.3 μg h−1 mg−1 at −0.5 V versus the reversible hydrogen electrode (vs. the RHE) and a FE of 13.4% at −0.3 V (vs. the RHE). According to the results of DFT calculations, the active center of the electro-catalytic nitrogen reduction reaction is the molybdenum atom between the iron atom and the O vacancy. Oxygen vacancies can not only reduce the energy barrier of the RDS but also facilitate the desorption of ammonia and the first step hydrogenation of nitrogen. The doping of Fe will change the electronic state of the Mo atom in MoO2.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Wen-Jian Yang,Li-Hui Yang,Han-Jun Peng,Si-Hao Lv,Hafiz Muhammad Adeel Sharif,Wei Sun,Wei Li,Cao Yang,Hui Lin
Electroreduction removal of nitrate (NO 3 – -N) is considered as a promising approach to solve its adverse effects on environment and human health, where efficient and cheap catalysts are required. Perovskite-based catalysts showed a versatile catalytic ability for wide range of redox reactions, but seldom applied for NO 3 – -N reduction. Herein, four perovskite oxide cathodes, LaMO 3-δ (M = Fe, Co, Ni and Cu) were prepared and used for the reduction of NO 3 – -N. The Ruddlesden-Popper (RP) type La 2 CuO 4 exhibited the best NO 3 – -N catalytic activity among the four perovskite oxide cathodes, with a removal rate of 11.7 × 10 -3 min −1 . The high selectivity of NH 4 + -N (82.4 ± 2.2%) indicated that NH 4 + -N was the main final product for NO 3 – -N electroreduction at La 2 CuO 4 cathode, but 100% of N 2 selectivity could be obtained with addition of 1000 and 1500 mg/L Cl - as the electro-assisted chlorination process. The mechanism of NO 3 – -N electroreduction occurred by both electron- and H*-mediated pathway, and the oxygen vacancies and redox cycle of Cu(I)-Cu(II)-Cu(I) were proposed as the accommodation sties and direct electron sources for NO 3 – -N reduction. Generally, this study opens a novel avenue for the development of earth-abundant, cost-effective catalyst with effective NO 3 – -N electroreduction.
✓ 已验证
产品关联
DOI
高影响因子
CHEMOSPHERE
·
2022
·
IF 8.943
Sheng Fan,Xinru Lu,Haoliang Li,Xiaodong Du,Xiaoyu Huang,Yao Ma,Juan Wang,Xueqin Tao,Zhi Dang,Guining Lu
Organophosphate esters (OPEs) are a new class of flame retardants present in diverse waters. The study focused on the removal of aqueous OPEs using functionalized MIL-101(Fe), which was a representative of the metal-organic frameworks (MOFs). Adsorption kinetics of tris(2-chloroethyl) phosphate (TCEP), tributyl phosphate (TnBP), and triphenyl phosphate (TPhP) were investigated. Additionally, TCEP was selected as the model contaminant to study the adsorption isotherms, thermodynamics, and effect of solution matrix properties. Adsorption mechanisms obtained from the experiments were confirmed using density functional theory (DFT) calculations. Adsorption kinetics indicated that functionalized MOFs provided a significant enhancement to the removal of TCEP. The maximum adsorption capacities q m of MIL-101(Fe), MIL-101(Fe)–NH 2 , MIL-101(Fe)–OH, and MIL-101(Fe)–CH 3 at 298 K for TCEP were 76.040, 282.940, 119.680, and 181.274 μmol/g, respectively. By comparing the adsorption behavior of functionalized MOFs, MIL-101(Fe)–NH 2 was proved to be most efficient for TCEP removal . Based on the adsorption experiments and DFT calculations, TCEP removal was dominated by physical adsorption. The van der Waals (vdW) interactions and hydrogen bonding were assumed to be involved in the adsorption. This work proves that appropriate ligand functionalization is promising for the removal of aqueous OPEs, which also provides a new insight for the control of OPEs pollution.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Huan Yang,Jun Li,Shuai Hu,Yi Liu,Cheng Peng,Chengfei Deng,Qinglin Chen,Tianding Hu,Shaoyun Shan,Yunfei Zhi,Hongying Su,Lihong Jiang
It’s extremely urgent to remove ciprofloxacin (CIP) pollutant from wastewater since the extensively used CIP is difficult to be degraded in natural environment, seriously threating the ecological environment and human health. Herein, a series of Fe-doped zeolitic imidazolate framework-8 (Fe-ZIF-8) adsorbents were fabricated by doping Fe ion into the ZIF-8. Systematic adsorption experiments were conducted to evaluate the possibility of Fe-ZIF-8 in removing CIP from aqueous solutions. Accordingly, the maximum adsorption capacity of Fe-ZIF-8 for CIP could reach an ultrahigh value of 1484 mg g −1 , which is higher than that of any reported adsorbents. The CIP adsorption on Fe-ZIF-8 followed pseudo-second-order kinetics model and fitted well with Freundlich isotherm model, indicating the presence of the chemosorption and multilayer adsorption. The outstanding adsorption capacity of CIP could be ascribed to the high surface area and large pore volume of Fe-ZIF-8 as well as the synergetic effects including surface complexation, electrostatic attraction, π-π and hydrogen bonding interactions. These unrivalled traits certify the great potential of Fe-ZIF-8 in practical application.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）