JOURNAL OF APPLIED POLYMER SCIENCE
·
2017
·Vol. 134
·期 46
·45431
·
IF 1.86
Ya Liu,Peng Qian,Yang Yu,Li Xiao,Yongliang Wang,Shufeng Ye,Yunfa Chen
Heavy metal ions such as Cu 2+ and Pb 2+ impose a significant risk to the environment and human health due to their high toxicity and non-degradable characteristics. Herein, Al(OH) 3 -polyacrylamide chemically modified with dithiocarbamates (Al-PAM-DTCs) was synthesized using formaldehyde, diethylenetriamine, carbon disulfide, and sodium hydroxide for rapid and efficient removal of Cu 2+ and Pb 2+ . The synthesized adsorbent was characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis, scanning electron microscopy–energy dispersive X-ray spectroscopy analysis, and transmission electron microscope measurements. Al-PAM-DTCs showed rapid removal of Cu 2+ (<30 min) and Pb 2+ (<15 min) with high adsorption capacities of 416.959 mg/g and 892.505 mg/g for Cu 2+ and Pb 2+ respectively. Al-PAM-DTCs also had high capacities in removing suspended solids and metal ions simultaneously in turbid bauxite suspensions. FTIR, thermodynamic study, and elemental mapping were used to determine the adsorption mechanism. The rapid, convenient, and effective adsorption of Cu 2+ and Pb 2+ indicated that Al-PAM-DTCs has great potential for practical applications in purification of other heavy metal ions from aquatic systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45431.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2017
·
IF 4.798
Shiqiao Wang,Guohan Sun,Zuanguang Chen,Yawen Liang,Qing Zhou,Yufang Pan,Haiyun Zhai
A sensitive and highly selective imprinted sensor for detecting an oxidative stress biomarker 3-nitrotyrosine (3-NT) detection was developed based on electropolymerized pyrrole molecularly imprinted polymer (MIP) doped with gold nanoparticles (AuNPs) on a glassy carbon electrode (GCE) modified with activated multiwall carbon nanotube @ graphene oxide nanoribbons (AMWCNT@GONRs). Adding AuNPs into the polymer composite effectively generated electrical response by facilitating the charge transfer process. As the specific recognition sites, the fabricating imprinted polymer-AMWCNT@GONRs composite exhibited excellent sensitivity, stability and specific selectivity behavior towards 3-NT. The surfaces morphology of the MIP modified electrode was characterized by scanning electron microscopy (SEM) showing that AMWCNT@GONRs were well dispersed under the imprinted polymer owning to highly porous surface structure. Under optimal conditions, the determination range of imprinted sensor for 3-NT was linearly response from 0.2 to 50.0 μM with a detection limit (S/N = 3) of 50.0 nM. Furthermore, this modified MIP sensor was successfully used for detection of 3-NT in human serum and urine samples.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2024
·
IF 5.8
Kunqi Liu,Junxia Wang,Jin Wang,Die Liu,Long Kang,Haiyuan Wei,Junjun Zhou
In this study, the 500 keV He–ion irradiation effects were systematically analyzed in Sr 0.5 Zr 2 (PO 4 ) 3 –Ce 0.5 Sm 0.5 PO 4 composite ceramics used for nuclear waste form. The phase evolution was investigated at various ion doses of 1 × 10 16 , 1 × 10 17 , and 5 × 10 17 ions/cm² using GIXRD, Raman. Meanwhile, the irradiation effects at various depths of 100 nm, 1500 nm and 3000 nm in the typical sample with an ions dose of 5 × 10 17 ions/cm 2 were further observed through FIB–TEM and SEM. The results indicated that Sr 0.5 Zr 2 (PO 4 ) 3 phase transitioned from crystalline to amorphous state, while Ce 0.5 Sm 0.5 PO 4 phase exhibited crystalline–disorder transition. Furthermore, the microscopic strain changes of both post–irradiated phases were assessed by a geometric phase analysis (GPA) method, which revealed that Sr 0.5 Zr 2 (PO 4 ) 3 phase accumulated more lattice stress than Ce 0.5 Sm 0.5 PO 4 phase. Ultimately, this study confirmed that the irradiation resistance of Sr 0.5 Zr 2 (PO 4 ) 3 phase under He–ion irradiation was inferior to that of Ce 0.5 Sm 0.5 PO 4 phase.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2024
·
IF 4
Meng Ye,Hongying Hou,Xianxi Liu,Zhaowei Sun,Xiaohua Yu,Ju Rong
With the development of the consumer society, low cost and high performance supercapacitors are being pursued. To realize the practical supercapacitors, developing the cheap and highly capacitive electrode is the most essential. However, it is a harsh challenge to achieve this target based on single-component electrode. Herein, a series of inexpensive ternary-metal-sulfides, 2MnS/Cu 2 S/ x ZnS/C ( x = 0, 0.5, 1, 2, 3) are synthesized by hydrothermal reaction and the subsequent calcination with expired manganese/copper gluconates as the raw materials for the electrode in the pseudocapacitors. Furthermore, the effect of ZnS's content on the electrochemical properties of the ternary composites is also investigated. Specially, the optimal 2MnS/Cu 2 S/xZnS/C( x = 1) can output a specific capacitance of 1608 F/g at 1 A/g in the three-electrode system, while the 2MnS/Cu 2 S/xZnS/C||AC( x = 1) asymmetric supercapacitor can deliver a specific capacitance of 194 F/g at 1 A/g with the desirable energy density (800 W/kg) and power density (70.9 Wh/kg), higher than those of other samples. Especially, even after 2000 cycles at 5.0 A/g, the 2MnS/Cu 2 S/xZnS/C||AC( x = 1) asymmetric supercapacitor also delivers the reversible specific capacitance of 103 F/g with high capacitance retention of 97.0 %, indicating high cycling stability. The outstanding performances of the optimal 2MnS/Cu 2 S/xZnS/C( x = 1) may be attributed to the bridge-effect of ZnS component, which makes up for the low conductivity of MnS component and the low capacitance of Cu 2 S component, thus achieving the best synergistic effect of ternary metal sulfide 2MnS/Cu 2 S/xZnS/C( x = 1) .
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF DERMATOLOGICAL TREATMENT
·
2024
·
IF 2.9
Yaxin Huang,Fuming Liu,Jindong Lai,Shiyu Jiang,Xiaoqi Tan,Lingna Chen,Yong Xu,Xia Xiong,Yongqiong Deng
Objectives:We aimed to explore the potential role of omega-3 (ω-3) fatty acids on acne vulgaris by modulating gut microbiota.Materials and Methods:We randomly divided the untreated acne patients into two groups with or without ω-3 fatty acids intervention for 12 weeks. The Sprague Dawley (SD) rats with acne model were given isotretinoin, ω-3 fatty acids or their combination respectively. Then the colonic contents samples of the drug intervention SD rats were transferred to the pseudo sterile rats with acne model. The severity of the disease was assessed by the Global Acne Grading System (GAGS) score of the patients, and the swelling rate of auricle and the pathological section of the rat with acne model. The 16S rDNA gene sequencing was performed to detect the alteration of the gut microbiota.Results:ω-3 fatty acids could increase the diversity of the gut microbiota and regulate the flora structure positively both in the patients and rats, increase the abundance of butyric acid producing bacteria and GAGS score in the patients, and alleviate the inflammation and comedones of rats.Conclusion:Supplementation of ω-3 fatty acids could alleviate the inflammation of acne vulgaris by increasing the abundance of butyric acid producing bacteria.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2024
·
IF 4.3
Mimi Ai,Yuting Jiang,Zhiyuan Xiao,Jinshui Liu,Chenfu Liu
A ratiometric luminescent probe was fabricated using adenosine monophosphate (AMP) as a bridging ligand and 3-carboxyphenylboronic acid (3-CPBA) as the sensitizer and functional ligand that allowed the probe to recognize hydrogen peroxide (H 2 O 2 ). The probe was labeled AMP-Tb/3-CPBA. Adding H 2 O 2 caused the nonluminescent 3-CPBA to be converted into 3-hydroxybenzoic acid, which strongly luminesces at 401 nm. This meant that adding H 2 O 2 decreased the AMP-Tb/3-CPBA luminescence intensity at 544 nm and caused luminescence at 401 nm. The 401 and 544 nm luminescence intensity ratio ( I 401 / I 544 ) was strongly associated with the H 2 O 2 concentration between 0.1 and 60.0 μM, and the detection limit was 0.23 μM. Dual emission reverse-change ratio luminescence sensing using the probe allowed environmental effects to be excluded and the assay to be very selective. We believe that the results pave the way for the development of new functionalized lanthanide coordination polymers for use in luminescence assays.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Haoyue Ning,Yuemei Zhang,Lixin Lu,Liao Pan
Nanoparticles are used as fillers to improve the properties of biopolymers , and their particle size is an important parameter. This work aims to investigate the effect of particle size of isoreticular metal-organic framework-3 (IRMOF-3) on the mechanical, physical, and release properties of sodium alginate (SA)-based composite active film. In our study, IRMOF-3 with six different particle sizes was synthesized by introducing additives. IRMOF-3 loading with carvacrol (IRMOF-3/CA nanoparticles) was incorporated into the SA matrix to prepare the composite film . The characterization and testing results of films showed that the particle size of nanoparticles affected the physical morphology and chemical structure of the film. Especially smaller nanoparticles uniformly dispersed into the SA matrix more easily, forming a denser and more stable spatial network structure with SA, which could more significantly improve the tensile strength , water vapor barrier, and hydrophobic properties of the film ( P < 0.05). In addition, the CA release rate from the active film could be significantly reduced by about 33.90 % even when the smallest particle size of the IRMOF-3/CA nanoparticles was added. Therefore, when IRMOF-3/CA is used as the nano-filler to develop SA-based active film, its particle size has a potential influence on the properties of the film.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CRYSTENGCOMM
·
2024
·Vol. 26
·期 24
·3194-3205
·
IF 2.6
Huimin Du,Yanyang Li,Mengran Ouyang,Meifang Liu,Shanshan Hu,Jun Yang
Yb3+/Er3+-doped Bi2(MoO4)3−z(WO4)z phosphors were synthesized via a hydrothermal method combined with subsequent calcination. Under the excitation of a light source of 980 nm, Bi2(MoO4)3:Yb3+/Er3+ phosphors exhibited strong upconversion green light and weak red light emissions. By doping WO42− in Bi2(MoO4)3:Yb3+/Er3+ phosphors, the upconversion luminescence intensity of the phosphors significantly enhanced, which is 42 times higher than that of the undoped WO42− phosphor. With an increase in WO42− doping content, the final color coordinates of Bi2(MoO4)3−z(WO4)z:Yb3+/Er3+ phosphors were (0.2352, 0.7274), which is closer to the standard green CIE coordinates. The maximum CP of WO42−-doped phosphors is as high as 116.68%, which is 74.44% higher than that of the undoped WO42− phosphor. Based on the thermally coupled energy levels (TCLs) of Er3+ (2H11/2/4S3/2 → 4I15/2) in Bi2(MoO4)2.7(WO4)0.3:14%Yb3+,3%Er3+ phosphor, the SR value reached a maximum of 0.0081 K−1 at 323 K and the SA value reached a maximum of 0.0099 K−1 at 398 K. The obtained Bi2(MoO4)3−z(WO4)z:Yb3+/Er3+ phosphors are suitable for upconversion luminescent materials for green displays and have potential advantages in optical temperature measurement.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2024
·
IF 8.5
Ying Sun,Mantong Zhao,Zhongyuan Liu,Haohao Shi,Xueying Zhang,Yongqiang Zhao,Zhenhua Ma,Gang Yu,Guanghua Xia,Xuanri Shen
This study explored the relationship between the interfacial behavior of lactoferrin-(−)-epigallocatechin-3-gallate covalent complex (LF-EGCG) and the stability of high internal phase Pickering emulsions (HIPPEs). The formation of covalent bond between lactoferrin and polyphenol was verified by the increase in molecular weight. In LF-EGCG group, the surface hydrophobicity, interfacial pressure, and adsorption rate were decreased, while the molecular flexibility, interfacial film viscoelasticity, and interfacial protein content were increased. Meanwhile, LF-EGCG HIPPE possessed reduced droplet size, increased ζ-potential and stability. Rheology showed the viscoelasticity, structural recovery and gel strength of LF-EGCG HIPPE were improved, giving HIPPE inks better 3D printing integrity and clarity. Moreover, the free fatty acids (FFA) release of LF-EGCG HIPPE (62.6%) was higher than that of the oil group (50.1%). Therefore, covalent treatment effectively improved the interfacial properties of protein particles and the stability of HIPPEs. The macroscopic properties of HIPPEs were positively regulated by the interfacial properties of protein particles. The result suggested that the stability of emulsions can be improved by regulating the interfacial properties of particles.
✓ 已验证
DOI
PubMed
高影响因子
THERMOCHIMICA ACTA
·
2024
·
IF 3.1
Zhen-Li Yang,Ya-Dong Yao,Jian-Guo Zhang,Qiang Xie,Feng Liu,Zhi-Wei He,Zu-Jia Lu
The construction and comprehensive characterization of energetic ionic salts 5-amino-3-hydrazinyl-1 H -1,2,4-triazolium diperchlorate (2) and 5-amino-3-hydrazinyl-1 H -1,2,4-triazolium 3-nitro-1,2,4-triazolate-5-one (3), which are based on 5-amino-3-hydrazinyl-1 H -1,2,4-triazole, were conducted. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were employed to explore the thermal and kinetic behaviors of the novel energetic ionic salts. An isoconversional approach and non-linear regression analysis were employed to propose accurate kinetic models for characterizing the decomposition of the energetic ionic salts based on the data from DSC and the most possible mechanism functions governing the decomposition of 2 and 3 was determined. Furthermore, experimental measurements and theoretical calculations were employed to examine diverse physicochemical characteristics, including densities, mechanical sensitivities, heat of formation as well as detonation parameters. The findings suggest that salt 2 exhibits a good detonation pressure of 37.4 GP and a satisfactory detonation velocity of 9031 m/s, exceeding RDX in terms of energy content and suggesting its potential as a viable high-energy explosive substitute for RDX. While salt 2 exhibits a slightly lower level of detonation performance than HMX, it possesses better sensitivity, which mean that salt 2 retains a considerable potential for valuable applications.
✓ 已验证
产品关联
DOI
高影响因子
INORGANICA CHIMICA ACTA
·
2024
·
IF 2.7
Zhengwei Wu,Jiawen Bao,Hongyang Zhang,Wanlin Wei,Boyang Zheng,Yingying Luo,Zhonglu You
Molecular nanoclusters comprising a heterometallic 3 d -4 f stoichiometry are an interesting class of compounds. In this paper, a chloro-containing Schiff base 4-chloro-2-(2-hydroxy-3-ethoxybenzylideneamino)phenol (H 2 L) was prepared by condensation reaction of 3-ethoxysalicylaldehyde with 2-amino-4-chlorophenol in methanol. The Schiff base is predisposed to chelate within a cluster core both 3 d and 4 f metal ions. Reaction of H 2 L with nickel salts afforded a tetranuclear Ni II complex [Ni 4 L 4 (MeOH) 4 ] ( 1 ), while with nickel salts and lanthanide(III) nitrate three tetranuclear Ni II -Ln III complexes [Ni 2 Eu 2 L 4 (NO 3 ) 2 (DMF) 2 ] ( 2 ), [Ni 2 Er 2 L 4 (NO 3 ) 2 (DMF) 2 ] ( 3 ), [Ni 2 Tb 2 L 4 (CH 3 COO) 2 (DMF) 2 ]·4DMF ( 4 ) were obtained. H 2 L and the complexes have been characterized by elemental analysis, IR, UV–Vis spectra. H 2 L has also been characterized by 1 H and 13 C NMR spectra. Molecular structures of the compounds have been determined by single crystal X-ray determination. In the complexes, the Schiff base ligands coordinate to the metal atoms via ether oxygen, imino nitrogen and two phenolate oxygen atoms. All the Ni atoms in the complexes are in octahedral coordination. The rare earth metal atoms are eight coordinated by the phenolate and ether oxygen of the Schiff base ligands, and anionic and solvent oxygen atoms, forming square antiprismatic coordination. The compounds were evaluated for their antibacterial activities on Bacillus subtilis , Staphylococcus aureus , Escherichia coli and Pseudomonas fluorescens , and antifungal activities on Candida albicans and Aspergillus niger , and gave interesting results.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2025
·Vol. 16
·期 1
·1-23
·
IF 15.7
Zhang Zhongyu,Zhao Zhengde,Huang Xiuyi,Zhou Lifang,Jiang Xin,Wu Haoliang,Liu Chenshu,Huang Kan,Wen Jielu,Liu Yunchong,Miller Michelle C.,Zhao Zihan,He Zhen,Wang Yuxin,Liu Siyu,Huang Lijin,Yuan Lining,Zeng Renli,Cen Zhipeng,Chen Anning,Chen Yanbo,Zeng Gang,Liu Wenzhou,Hong Xiaosi,Ren Meng,Yan Li,Zhang Yang,Guan Dongxian,Tian Xiaoyu,Cai Weikang,Tai Guihua,Mayo Kevin H.,Zhou Yifa,Li Zilun,Chen Sifan
Diabetic foot ulcers are severe diabetic complications, and promoting impaired angiogenesis is essential for wound healing. Pro-angiogenic galectin-3 is elevated in diabetic serum and promotes systemic insulin resistance that may impair wound healing. However, the exact role of galectin-3 in the regulation of diabetic wound healing remains unclear. Here, we demonstrate that galectin-3 promotes skin wound healing and angiogenesis via binding to its receptor integrin α5β1, and enhances downstream focal adhesion kinase phosphorylation by forming a liquid-liquid phase separation with integrin α5β1. Under diabetic conditions, aberrant accumulated advanced glycation end-products bind to galectin-3, blocking its interaction with integrin α5β1 and impairing angiogenesis. Topical treatment of recombinant galectin-3 in hydrogels promotes diabetic wound healing in rodents without causing systemic insulin resistance and synergizes with insulin. This study clarifies the binding of galectin-3 to integrin α5β1, instead of advanced glycation end-products, forming phase separation to promote angiogenesis and diabetic wound healing, laying the foundation for local galectin-3 therapy to treat diabetic foot ulcers.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）