COLLOIDS AND SURFACES B-BIOINTERFACES
·
2021
·
IF 5.268
Xiaoyan Yang,Huihui Chai,Lingli Guo,Ying Jiang,Liqun Xu,Wei Huang,Yijun Shen,Ling Yu,Yingshuai Liu,Jing Liu
Poly-ether-ether-ketone (PEEK) is a promising material in oral repair and orthopedic implantation field due to its stability and proper elastic modulus. However, the lack of simple but effective strategy to functionalize PEEK and improve its antibacterial function hinders its further biomedical application. In this study, a sulfonated 3D porous PEEK is fabricated via sulfonation treatment, and then decorated with the in situ synthesized zeolitic imidazolate framework-8 (ZIF-8), in which Ag + ions were loaded with high loading capacity. Surface morphology, roughness, chemical composition and hydrophilicity of all the substrates were evaluated in details, suggesting Ag + ions loaded ZIF-8 on sulfonated PEEK (SPZA) was successfully prepared. The antibacterial activity of pristine and functionalized PEEK was evaluated by inhibition zone test, spread plate assay, growth curve, and morphology of bacteria. Experimental results demonstrate that the SPZA has effectively bacteriostatic performance against Escherichia coli ( E. coli ) and Staphylococcus aureus ( S. aureus ). The excellent antimicrobial activity is attributed to the synergistic effect of Ag + and Zn 2+ ions released continuously from SPZA. This work provides a promising route for surface modification of PEEK and offer a potential candidate for biomedical implants.
✓ 已验证
DOI
PubMed
高影响因子
BIOSENSORS & BIOELECTRONICS
·
2016
·
IF 7.476
Zhipan Guo,Xiuhui Liu,Yuelin Liu,Guofan Wu,Xiaoquan Lu
8-Hydroxy-2′-deoxyguanosine (8-OHdG) is commonly identified as a biomarker of oxidative DNA damage. In this work, a novel and facile 8-OHdG sensor was developed based on the multi-walled carbon nanotubes (MWCNTs) modified glassy carbon electrode (GCE). It exhibited good electrochemical responses toward the oxidation of 8-OHdG, and the linear ranges were 5.63×10 −8 −6.08×10 −6 M and 6.08×10 −6 −1.64×10 −5 M, with the detection limit of 1.88×10 −8 M (S/N=3). Moreover, the fabricated sensor was applied for the determination of 8-OHdG generated from damaged DNA and guanine , respectively, and the oxidation currents of 8-OHdG increased along with the damaged DNA and guanine within certain concentrations. These results could be used to evaluate the DNA damage, and provide useful information on diagnosing diseases caused by mutation and deficiency of the immunity system.
✓ 已验证
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2020
·
IF 4.3
Yong Pan,Tengyang Zhu,Qing Xia,Xi Yu,Yan Wang
Emerging pervaporation technology is very promising to realize clean and renewable bioethanol recovery from biomass fermentation broth. The huge challenge of this technology is the need for a pervaporation membrane with high separation performance. Based on the solution-diffusion mechanism, pervaporation membrane for ethanol recovery should possess hydrophobic selective layer to improve sorption ability toward ethanol molecules, thereby enhancing the separation performance. In this study, a superhydrophobic zeolitic imidazolate framework-8 (ZIF-8) layer with a nano-level bud-like surface morphology was grown on polydimethylsiloxane (PDMS) composite membrane via ZIF-8 particle dip-casting, secondary seeded growth, and hydrophobic modification by n-octadecylphosphonic acid for highly efficient ethanol/water separation. The mole ratio of 2-methylimidazole and zinc nitrate (Hmim/Zn 2+ ) in the process of ZIF-8 secondary growth was systematically studied to construct appropriate micro-nano structure on PDMS composite membrane. The resultant optimal composite membrane exhibited a water contact angle of about 163° and an ethanol contact angle of 0°. In addition, it also displayed an outstanding separation factor of 17.4 corresponding to a total flux of 0.64 kg/m 2 h with 5 wt% ethanol aqueous solution at 30 ℃, and thus the superior pervaporation performance to most other reported PDMS-based mixed matrix membranes. The strategy of constructing superhydrophobic layer on PDMS composite membrane may provide a meaningful guidance for preparing high-performance pervaporation membrane for organic recovery from aqueous solution.
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2021
·Vol. 45
·期 14
·6543-6549
·
IF 3.591
Ziqi Zhang,Xiang Ni,Kaida Yao,Siqi Zhang,Yang Liu,Yueqiu Sun,Xiangzhi Wang,Weimin Huang,Yan Zhang
Titanium has been applied to implants over the last decades due to its excellent biocompatibility and mechanical properties. However, there are still some drawbacks for titanium and its alloys to overcome. Thus, in this study, a novel electrochemical synthesis process has been developed to fabricate TiO2 nanotube array, hydroxyapatite and rare-earth (La3+) doped ZIF-8 nanoparticle composite coating, which can enhance the antibacterial and anti-corrosion property on the premise of minimizing the biocompatibility loss of titanium implants. Compared with traditional processing methods, electrochemical machining is more time-saving, energy-saving and environment-friendly. Thus, it provides an alternative way to produce medical implants.
✓ 已验证
DOI
高影响因子
RSC Advances
·
2020
·Vol. 10
·期 57
·34381-34386
·
IF 3.119
Lele Chen,Jinghao Tian,Huaxing Song,Zhaohua Gao,Haisheng Wei,Wenhua Wang,Wanzhong Ren
Hydroformylation of olefins is one of the most important industrial processes for aldehyde production. Therein, the leaching of active metals for heterogeneous catalysts is an important issue in the hydroformylation reaction, particularly for higher olefins to produce higher alcohols. Here, different Rh/ZnO catalysts with diverse ZnO as a support were investigated and a home-made ZnO50 support was selected to prepare the Rh/ZnO50@ZIF-8 core–shell structure catalyst, which was synthesized by the growth of ZIF-8 with ZnO50 as the sacrificed template to afford Zn source. Compared with the Rh/ZnO50 catalyst, the Rh/ZnO50@ZIF-8 catalyst demonstrated a better cyclic stability in the hydroformylation of 1-dodecene. Combining the experiment and characterization results, it was concluded that the ZIF-8 shell on the Rh/ZnO50 catalyst effectively prevented the leaching of metal Rh into the reaction solution. Moreover, the Rh/ZnO50@ZIF-8 catalyst exhibited good universality for other higher olefins. This work provides a useful guideline for immobilizing the active species in heterogeneous catalysts for the hydroformylation reaction.
✓ 已验证
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Yunfei Shen,Huaiqi Shi,Keying Qu,Zuopeng Li,Bolong Yang,Zhansheng Wu
Multifunctional cotton fabric holds significant promise for domestic and healthcare applications. A key challenge remains developing sustainable fabrication routes for mechanically durable cotton textiles integrating intrinsic and photothermally amplified antibacterial functions. Herein, we prepared ZIF-8/67-loaded Ag nanoparticles on cotton fabric using in-situ reduction technology (ZIF-8/67-Ag@CCT). Subsequent dip-coating with polydimethylsiloxane (PDMS) produced ZIF-8/67-Ag@CCT@PDMS, enhancing superhydrophobicity. The modified fabric exhibited exceptional superhydrophobicity (water contact angle: 148.55 ± 0.21°) and UV-blocking capabilities (UPF value: 186). The surface demonstrated excellent self-cleaning properties against dyes and maintained robust stability after 30 washing cycles and immersion in acidic/alkaline solutions (>97.0% antibacterial efficacy retention). Critically, the fabric exhibited excellent biocompatibility, as validated by human induced pluripotent stem cell-derived skin organoid assays showing no adverse effects on cell proliferation, apoptosis, or survival rates. Antibacterial effects originated from the penetration of AgNPs and Ag⁺/Zn²⁺/Co²⁺ ions into bacterial structures, disrupting metabolism via reactive oxygen species (ROS) generation. The multifunctional ZIF-8/67-Ag@CCT@PDMS fabric presents a highly promising solution for durable antibacterial medical textiles, offering combined antibacterial activity, exceptional stability, self-cleaning, UV resistance, and biocompatibility.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Chunlei Wang,Dawei Ji,Xuyong Tian,Hongye Lv,Xiuping Li,Tai Zhang,Haolong Xue,Chun Wang,Jingjing Yan,Changfa Xiao
Doping metal-organic frameworks into the casting solution is a common method for preparing mixed matrix membranes. However, metal-organic frameworks are prone to agglomeration and poor dispersion. This can lead to a decline in membrane performance. To address these issues, this work proposed “co-solvent synthesis and in-situ doping” strategy. In this strategy, N,N-Dimethylformamide, which was also the solvent in the casting solution, was chosen as the synthesis carrier for ZIF-8-NH 2 nanoparticles. The prepared ZIF-8-NH 2 suspension could be directly doped into the casting solution in situ. This process eliminated the drying and pre-dispersion steps. Research showed that with 0.5 wt% ZIF-8-NH 2 , the membrane's hydrophilicity significantly improved, with the water contact angle of 72.5°. The pure water flux reached 229 Lm −2 h −1 . Moreover, the retention rates of Congo Red and NaCl were 97.3 % and 3.5 % respectively, demonstrating excellent dye/salt separation. In particular, the flux recovery rate was maintained at more than 91 %, demonstrating good anti-fouling performance. This work provides a promising technical strategy for the efficient treatment of textile dyeing wastewater and resource recovery.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Wenxiang Hu,Jiangyu Zong,Jiajun Gong,Rong Xue,Yangbin Lv,Biao Liu,Wenting Dai,Yajun Wang,Chu Chu
Lipase immobilization plays a pivotal role in enhancing enzyme stability, reusability, and practical applicability in ligand fishing, a technique used to identify bioactive compounds from traditional Chinese medicine (TCM). However, conventional methods often lead to significant activity loss due to suffering from enzyme leakage, conformational distortion, and mass transfer resistance. In this study, we present a dynamic defect-engineering (DDE) strategy within zeolitic imidazolate framework-8 (ZIF-8) to overcome these limitations. The DDE process enables adaptive formation of transport channels driven by enzyme–framework interactions, facilitating the migration of lipase from surface adsorption to intracrystalline encapsulation. Brunauer–Emmett–Teller (BET) analysis confirmed successful encapsulation, showing a reduced specific surface area of 565.1 m 2 /g for lipase@ZIF-8, indicative of enzyme incorporation within the defect-engineered framework. This structural optimization significantly improved biocatalytic performance, achieving 82 % activity retention and 65 % immobilization yield, compared to 44 % activity retention in conventional in situ encapsulation. Utilizing the preserved catalytic activity, we established a lipase-based ligand fishing platform, which successfully identified 20 potential inhibitors (10 anthraquinones and 10 flavonoids) from Cassiae Semen and Citri Reticulatae Pericarpium using HPLC-Q-TOF-MS/MS analysis. Overall, this work demonstrates the effectiveness of the DDE strategy in enhancing lipase immobilization within ZIF-8, offering a robust and efficient platform for the high-throughput screening of lipase inhibitors from natural products and advancing the application of enzyme-based ligand fishing in TCM research.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Today Chemistry
·
2025
·
IF 6.7
Henigul osman,Xiaohui Tang,Dong Zhang,Bo Liu,Jie Gao,Xin Chen,Tao Jiang,Haobo Pan,Yingbo Wang
To address the dual challenges of controlled drug delivery and microenvironment modulation in repairing osteoporotic bone defects, we developed a multifunctional poly(l-lactic acid) (PLLA)-based composite fibrous scaffold (PLLA/PDA/ZIF-8@Qu). The scaffold was fabricated via electrospinning, followed by in situ polydopamine (PDA) polymerization to robustly immobilize ZIF-8 nanocarriers loaded with quercetin (Qu) on the fiber surface. The mussel-inspired PDA coating served as an adhesive interlayer between ZIF-8 and PLLA. Additionally, it provided near-infrared (NIR) responsiveness and surface functionalization capability. Under osteoporotic acidic conditions (pH 5.0–6.0), the scaffold exhibited pH-triggered release behavior, ZIF-8 degradation accelerated Zn 2+ release, and cumulative Qu release reached 90 %. Zn 2+ contributed to antibacterial activity, while the PDA coating enabled NIR-driven photothermal/photodynamic synergy, achieving 100 % inhibition against both E. coliand S. aureus. Quercetin (Qu) exerted antioxidant effects via the Nrf2/ARE pathway and promoted macrophage polarization toward the M2 phenotype, thereby ameliorating the local inflammatory microenvironment. In vitro , the scaffold enhanced osteogenic differentiation of bone marrow mesenchymal stem cells, as indicated by a 2.3-fold increase in alkaline phosphatase activity, a 1.85-fold increase in mineralized nodule formation, and upregulated Runx2 expression. In a rat femoral defect model, the scaffold group at 8 weeks post-implantation showed increased bone mineral density (BMD) from 0.454 to 0.935 g/cm 3 and trabecular number (Tb.N) from 0.694 to 0.923 mm −1 , with the defect largely filled by newly formed bone. Collectively, these results demonstrate that the PDA-enabled, ZIF-8/Qu-integrated PLLA scaffold couples pH-responsive release with antibacterial, anti-inflammatory, and pro-osteogenic functions, supporting its potential as a bone repair material responsive to pathological microenvironments.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2021
·
IF 6.707
Ting-xu Wang,Si-ruo Chen,Ting Wang,Li-guang Wu,Yu-xing Wang
Polyethersulfone (PES) mixed-matrix membranes (MMMs) incorporating a co-nanofiller of ZIF-8 and poly(ionic liquid) were constructed via a facile one-pot microemulsion strategy, aiming to increase the flux and anti-fouling properties of the original PES membranes. First, ZIF-8 nanoparticles were synthetized in the reverse microemulsion using 1-butyl-3-methylimidazolium (BmimOTF) ionic liquid as a surfactant and 1-vinyl-3-ethylimidazolium tetrafluoroborate (VeimBF 4 ) polymerizable ionic liquid as an oil phase. Subsequently, the oil phase VeimBF 4 in the reverse microemulsion was polymerized, and a latex containing ZIF-8 nanoparticles and poly(VeimBF 4 ) was formed. Finally, MMMs were constructed by blending the latex with PES via the phase-inversion method. The microstructures of ZIF-8 and the MMMs were characterized by TEM, SEM, FTIR, XRD, and XPS analysis. Results showed that the mean size of ZIF-8 are small (10 ∼ 35 nm). Addition of the poly(VeimBF 4 ) and ZIF-8 nanoparticles increased the pore size and hydrophilicity of MMMs. The maximum water flux was 105 L m −2 ·h −1 ·bar −1 and 90% flux recovery were obtained after five cycles of filtration, and little decrease of WCA appeared on all MMMs after the repeated experiment, indicated the good stability of MMMs. Compared with PES ultrafiltration membrane, pure water flux and flux recovery rate of the MMMs increased by 15 and 2.8 times respectively.
✓ 已验证
DOI
高影响因子
TALANTA
·
2021
·
IF 6.057
Ya Ma,Yunlong Zhang,Lishi Wang
In this manuscript, a layer of 2-methylimidazole zinc salt (ZIF-8) membrane is deposited on the surface of glassy carbon electrode (GCE) modified with platinum nanoparticles (Pt NPs) by reduction electrochemical method to obtain ZIF-8/Pt NPs/GCE, and then used for the detection of ascorbic acid (AA). The deposition of Pt NPs on the surface of GCE can not only guide the nucleation and growth of ZIF-8 membrane, but also exert a synergistic effect with it to enhance conductivity. For ZIF-8 membrane, it can increase the active area of electrode and thus improve the electrochemical response of the sensor for AA. Influence factors such as the deposition current density , deposition time on the surface morphology of the modified electrode, and the detection performance of the modified electrode during the electrochemical deposition of ZIF-8 membrane were explored to get the best performance. In addition, influence of conditions such as sweep speed and pH of the test solution on the electrochemical response signal of AA were also studied. Under the best conditions, the linear range of AA detection by this sensor is from 10 μmol L −1 to 2500 μmol L −1 , and the detection limit is 5.2 μmol L −1 based on S/N = 3. What's more, the modified electrode also has good anti-interference ability, reproducibility and stability, and has achieved satisfactory results in the detection for AA in real samples.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY
·
2023
·Vol. 124
·期 1
·e27327
·
IF 2.2
Jiaxi Yang,Dan Gao,Yong Pan,Yuanyuan Cao,Heng Zhang,Yating Chen
The combination of zeolitic imidazolate framework-8 (ZIF-8) and ionic liquids (ILs) to create porous ionic liquids (PILs) is highly significant for efficient carbon dioxide (CO 2 ) capture and the advancement of carbon capture, utilization, and storage (CCUS) technologies. To further investigate the CO 2 capture characteristics of different PILs, two different-sized ZIF-8 structures and two functionalized ILs were prepared. Additionally, the enhancement factor of the reaction process was calculated using the dual-film theory and mass transfer coefficient. The results demonstrated that the original [PMIm]Cl had low CO 2 absorption capacity at ambient temperature and pressure, whereas the functionalized ILs had a maximum CO 2 capture capacity of approximately .31 mol/mol, with the 20 wt% concentration of tetraethylene pentamine-2-methylimidazole ([TEP][MIm]) exhibiting the highest CO 2 capture capacity of around 1.93 mol/mol. The synthesized PILs demonstrated a maximum CO 2 capture capacity of approximately 2.22 and 2.16 mol/mol at 20 and 10 wt% ionic concentrations, respectively, with a porous ionic liquid addition of 1.0/100 g. The corresponding enhancement factors were 1.53 and 1.59, respectively. These findings have significant implications for CCUS technology.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）