JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Weirui Chen,Yixiang Bao,Xukai Li,Jun Huang,Jinxin Xie,Laisheng Li
Heterogeneous catalytic ozonation had met the bottlenecks when treating low concentration but high toxic pollutants: (i) the low mass transfer efficiency of ozone and pollutants to hydrophilic catalyst; (ii) the negative impact of coexisted water matrixes. Herein, to enhance the mass transfer efficiency of reactants toward hydrophilic Fe-MCM-41 as well as enhance the interfacial reaction, the fluoride planting Fe-MCM-41 (F-Fe-MCM-41) was synthesized and employed as catalyst in catalytic ozonation for nitrobenzene (NB). Both NB and TOC removal were promoted in F-Fe-MCM-41/O 3 with 99.0 % NB removal in 60 min and 88.6 % TOC removal in 120 min, which were superior to the degradation efficiency by O 3 and Fe-MCM-41/O 3 . FTIR, EPR, Mössbauer spectra, 29 Si NMR, 19 F NMR et al verified that the replacement of non-reactive silanols (-Si−OH) of Fe-MCM-41 with Si F groups could enhance its hydrophobicity, Lewis acidity and mass transfer effect. Comparative characterizations, experiments and theoretical calculations verified that interfacial reaction played the major role over liquid phase reaction for NB degradation in F-Fe-MCM-41/O 3 . Moreover, the strengthened interfacial reaction also reduced the OH scavenging effect of water matrix, such as humic acid and carbonate. The interfacial adjustment method proposed in this study provided a novel insight into catalyst design and water treatment process.
研究领域:
环境科学
·
催化材料
✓ 已验证
DOI
高影响因子
Journal of Physical Chemistry Letters
·
2024
·
IF 4.8
Yanchang Wang,Yao Xiao,Jiangnan Huang,Chunxiao Zhang,Kentaro Yamamoto,Yoshiharu Uchimoto,Weifeng Wei,Hongshuai Hou,Datong Zhang,Xiaobo Ji
For cathode materials of sodium-ion batteries, O3-type Ni/Fe/Mn-based (Na-NFM) layered oxides have garnered extensive attention because of high economic viability, environmental friendliness, and the potential for high energy density. Among them, Fe-rich compositions exhibit higher initial charge capacity and lower bill-of-material costs, while they fade rapidly and exhibit low initial coulombic efficiency, hindering their commercialization prospects. In this work, we investigate the failure of Fe-rich Na-NFM materials through X-ray absorption spectroscopy methods. The results reveal a combined failure mechanism that encompasses not only the conventional theory of Fe migration but also an abnormal Ni-redox deterioration, which has not yet been reported. More factors related to the failure of Fe-rich Na-NFM layered oxides are discussed in detail. These findings are expected to inspire targeted research efforts toward Fe-rich Na-NFM materials, thereby accelerating the practical application of sodium-ion batteries.
研究领域:
材料科学
·
电化学
·
固态化学
·
储能
✓ 已验证
DOI
高影响因子
Foods
·
2021
·Vol. 10
·期 2
·419
·
IF 4.35
Pei Hu,Zhentao Sun,Yunwen Shen,Yiwen Pan
Hydrogen peroxide (H2O2) has been reported to be used for the illegal treatment of fishery products in order to obtain “fake” freshness. Residues of H2O2in food may be of toxicology concern. In this study, a nonenzymatic sensor was developed based on Fe@PCN-224 metal–organic frameworks wrapped by Nafion to detect H2O2concentration. The hybrid structure of Fe@PCN-224 was fabricated by incorporated free FeIIIions into the center of PCN-224, which was ultra-stable due to the strong interactions between Zr6and the carboxyl group. Scanning electron spectroscopy images exhibited that Nafion sheets crossed together on the surface of Fe@PCN-224 nanoparticles to form a hierarchical and coherent structure for efficient electron transfer. Electrochemical investigations showed that the Fe@PCN-224/Nafion/GCE possessed good linearity from 2 to 13,000 μM (including four orders of magnitude), low detection limits (0.7 μM), high stability in continuous monitoring (current remained nearly stable over 2300 s) and in long-term measurement (current decreased 3.4% for 30 days). The prepared nanohybrid modified electrode was effectively applied to H2O2detection in three different fishery products. The results were comparable to those measured using photometrical methods. The developed electrochemical method has a great potential in detecting the illegal management of fishery products with H2O2.Keywords:Fe@PCN-224;Nafion;nonenzymatic sensor;hydrogen peroxide;fishery products
研究领域:
食品安全检测
·
电化学分析
·
材料科学
✓ 已验证
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2025
·
IF 7.2
Haishuo Wang,Xinke Tian,Zhichun Li,Jie Zhang,Shiyin Li,Heyong Huang
Lake eutrophication leads to the excessive proliferation of cyanobacteria in aquatic environments, resulting in microcystin-LR (MCLR) concentrations exceeding regulatory limits. The associated environmental risks and health concerns attract widespread attention. As one of the most active chemical substances in aquatic environments, dissolved organic matter (DOM) plays a critical role in the phototransformation of MCLR. In environments where Fe(II) and Mn(II) coexist, the phototransformation process of MCLR may be influenced. Among fulvic acid (FA), humic acid (HA), cyanobacteria-derived DOM (CDOM), and reed leaf-derived DOM (RDOM), FA has the highest apparent reaction rate constant for MCLR at 0.03567 h -1 . Using isopropanol, furfuryl alcohol, and sorbic acid as quenchers, the contributions of different photochemically produced reactive intermediates(PPRIs) to MCLR photodegradation follow the order: 3 DOM⁎ > ·OH > 1 O 2 . As pH increases, changes in the conformation and charge distribution of DOM and MCLR suppress MCLR photodegradation. The addition of Fe(II) or Mn(II) enhances the photodegradation of MCLR by DOM. Electron paramagnetic resonance tests and radical quenching experiments indicate that the introduction of Fe(II)/Mn(II) increases ·OH production. The enhanced ·OH promotes MCLR photodegradation more effectively than the suppression caused by Fe(II)/Mn(II) quenching of ³DOM⁎. Product analysis reveals that demethylation, hydroxylation, decarbonylation, decarboxylation, denitration, and bond cleavage are the main pathways of MCLR photodegradation. These findings provide valuable insights into the migration and transformation of MCLR in complex environments, contributing to a deeper understanding of the fate of pollutants in natural water systems, particularly in the presence of metal ions.
研究领域:
环境科学
·
水生生态学
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2020
·Vol. 11
·期 1
·1-12
·
IF 12.121
Long Xiangdong,Li Zelong,Gao Guang,Sun Peng,Wang Jia,Zhang Bingsen,Zhong Jun,Jiang Zheng,Li Fuwei
Single-atom metal-nitrogen-carbon (M-N-C) catalysts have sparked intensive interests, however, the development of an atomically dispersed metal-phosphorus-carbon (M-P-C) catalyst has not been achieved, although molecular metal-phosphine complexes have found tremendous applications in homogeneous catalysis. Herein, we successfully construct graphitic phosphorus species coordinated single-atom Fe on P-doped carbon, which display outstanding catalytic performance and reaction generality in the heterogeneous hydrogenation of N-heterocycles, functionalized nitroarenes, and reductive amination reactions, while the corresponding atomically dispersed Fe atoms embedded on N-doped carbon are almost inactive under the same reaction conditions. Furthermore, we find that the catalytic activity of graphitic phosphorus coordinated single-atom Fe sharply decreased when Fe atoms were transformed to Fe clusters/nanoparticles by post-impregnation Fe species. This work can be of fundamental interest for the design of single-atom catalysts by utilizing P atoms as coordination sites as well as of practical use for the application of M-P-C catalysts in heterogeneous catalysis.
研究领域:
催化
·
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2021
·
IF 8.067
Kun Li,Luxin Liang,Peng Du,Zeyun Cai,Tao Xiang,Hiroyasu Kanetaka,Hong Wu,Guoqiang Xie
Magnesium (Mg) alloys can be regarded as the most promising biodegradable implant materials for orthopedic and stent applications due to their good biocompatibility and low Young's modulus which is near to that of natural bone. However, its applicability is hindered because it exhibits a high corrosion rate in the physiological environments. In this work, we fabricated Mg 66 Zn 30 Ca 4 /Fe bulk metallic glass composites via spark plasma sintering (SPS). We studied the influence of different contents of Fe on the properties of the composites. The results indicated that Fe was uniformly distributed on the surface of Mg 66 Zn 30 Ca 4 metallic glass (MG) as a second phase, which led to an improvement in the corrosion resistance and mechanical strength. The standard potential of Mg 66 Zn 30 Ca 4 /Fe bulk metallic glass (BMG) composites increased as compared to Mg 66 Zn 30 Ca 4 , while their mechanical strength improved from 355 MPa to 616 MPa. Furthermore, cytotoxicity was investigated via the CCK-8 assay and calcein-AM staining, which revealed that the extraction mediums diluted 6 times (EM × 6) of the Mg 66 Zn 30 Ca 4 and Mg 66 Zn 30 Ca 4 /Fe did not cause cell toxicity on day 3 and 5, while the EM × 6 of the Mg 66 Zn 30 Ca 4 showed cytotoxicity on day 1, 3 and 5. Thus, Mg 66 Zn 30 Ca 4 /Fe BMG composites exhibit significant potential for fabricating implants with good mechanical strength and corrosion resistance.
研究领域:
材料科学
·
生物医学工程
✓ 已验证
DOI
高影响因子
Journal of CO2 Utilization
·
2020
·
IF 5.993
Chengyi Dai,Xiao Zhao,Borui Hu,Xinbao Zhang,Qunxing Luo,Xinwen Guo,Xiaoxun Ma
Capturing and utilization of carbon dioxide (CO 2 ) not only leads to effective use of carbon resources, but also alleviates environmental pollution caused by increasing concentration of CO 2 , thus making it a hot research topic in recent years. In this study, a series of highly dispersed iron-cobalt (Fe-Co) catalysts was prepared by ethylenediaminetetraacetic acid disodium salt (EDTA-2Na) modification, which could efficiently convert CO 2 into high value-added chemicals (C 2 -C 4 = and C 5 -C 11 ). X-ray diffraction (XRD) analysis showed that the addition of a small amount of Co and EDTA-2Na contributed to enhance the sintering resistance of Fe species. During the calcination process, EDTA 4− can be decomposed into small organic molecules with reducibility, thus promoting the reduction of iron species. The CO temperature-programmed desorption (CO-TPD) results showed that cobalt enhanced the adsorption and activation of intermediate CO on Na x Fe-Co catalyst, thereby promoting the catalytic conversion of CO 2 . The complexation of EDTA promotes the synergistic effect of Fe-Co bimetals, enhances the chemical adsorption of CO 2 . Sodium in EDTA-2Na promotes the surface basicity of the catalysts, which is favored for improving the product distribution of hydrocarbons. At lower H 2 /CO 2 (1/1) ratio, the EDTA-2Na modified Fe-Co/Al 2 O 3 catalyst exhibited high conversion of CO 2 (32.8 %) and excellent selectivity toward high value-added chemicals. The selectivity of by-product CO was only 8.1 %; and C 2 -C 4 = (32.5 %) and C 5 -C 11 (46.3 %) accounted for ∼79 % selectivity among the hydrocarbons generated.
研究领域:
催化化学
·
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
TRANSITION METAL CHEMISTRY
·
2025
·
IF 1.7
Wang Yuqin,He Lizi,Han Ning,Li Lishuang,Wang Meiyang
It is of great practical significance to explore and prepare cheap, high-performance, and stable catalysts for oxygen reduction reaction (ORR), but it is still in progress at present. Herein, a straightforward evaporation–pyrolysis strategy is designed for the preparation of 3D porous electrocatalysts (denoted as \(\textrm{Fe}-\textrm{Co}-\textrm{NC}\) , which represented carbonization products at °C) made of carbon nanoparticles combined with metallic Fe-Co-doped N-enriched bridged carbon nanotube by carbonization of a pristine ZIF8 as highly efficient and durable ORR electrocatalysts. The obtained Fe–Co–NC structure possesses 3D open porous texture, abundant active sites, desired nitrogen bonding type, and high specific surface area, providing them with excellent ORR activity. The optimal performing \(\textrm{Fe}-\textrm{Co}-\textrm{NC}\) catalyst presents an outstanding ORR performance in terms of a high onset potential ( \(\textrm{E}_{\text{ onset } }\) ) of 0.96 V (vs. RHE) and half-wave potential ( \(\textrm{E}_{1 / 2}\) ) of 0.86 V (vs. RHE), respectively, possible to rival those of the commercially available \(\textrm{Pt} / \textrm{C}\) in an alkaline electrolyte solution. Besides, the \(\textrm{Fe}-\textrm{Co}-\textrm{NC}\) catalyst manifests better stability than those of commercially available \(\textrm{Pt} / \textrm{C}\) , which is of importance for the optimization and characterization of novel electrocatalysts originated from non-precious metals.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
Frontiers in Chemistry
·
2021
·
IF 5.221
Zhang Hui,Zhou Liang,Li Jing,Rong Sijia,Jiang Jianping,Liu Shengquan
Herein, we report a novel carboxymethyl cellulose (CMC)/MIL-101 (Fe)/poly(β-cyclodextrin) (β-CDP) hydrogel with high photocatalytic activity. β-CDP can significantly enhance the photoactivity of MIL-101(Fe) in the hydrogel prepared by a simple solvothermal method. The structure and property of this composite hydrogel were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Tetracycline was selected as a model pharmaceutical antibiotic to evaluate the photocatalytic activity of the composite hydrogel under visible light irradiation and darkness, respectively. This composite hydrogel shows excellent activity for degrading pharmaceutical antibiotics under visible light irradiation. The increased photocatalytic activity can be attributed to β-CDP, which acts as a promoter and affords an efficient separation of photogenerated electron-hole pairs of MIL-101(Fe). Moreover, the composite hydrogel is shown to have good water retainability. The hydrogel is inexpensive and shows high photocatalytic activity. Hence, it can be used as an efficient photocatalytic material.
研究领域:
环境科学
·
材料科学
·
药学
✓ 已验证
DOI
PubMed
高影响因子
EUROPEAN JOURNAL OF INORGANIC CHEMISTRY
·
2021
·Vol. 2021
·期 38
·3992-3999
·
IF 2.524
Bing-Xue Luo,Yao Pan,Yin-Shan Meng,Qiang Liu,Jun Yin,Tao Liu,Yuan-Yuan Zhu
Graphical A magneto-fluorescent bifunctional Fe(II) complex is synthesized through decoration of the pyrene fluorophore to Fe(II)-pybox moiety. Its magnetic and fluorescent properties are characterized via X-ray structural analyses, magnetic susceptibility measurement, 57 Fe Mössbauer spectroscopy, and fluorescent spectroscopy. As expected, the coexistence of spin-crossover and fluorescence is achieved. The construction of magneto-fluorescent bifunctional complexes is a feasible approach toward multifunctional molecular materials. Herein we report the synthesis and properties studies of a mononuclear Fe(II) complex [Fe L 2 ](ClO 4 ) ( 1 ), where L is a pyridine-2,6-bis(oxazoline) (pybox) ligand decorated by the pyrene fluorophore. Magnetic susceptibility measurement of desolvated complex 1-d shows an incomplete and gradual spin-crossover in the temperature range 50–300 K, which is further confirmed via 57 Fe Mössbauer spectroscopy study. Light-induced excited spin state trapping (LIESST) is also observed below 70 K when the powder sample is irradiated by a 532 nm laser. The change in absorption during the spin-crossover (SCO) process is investigated via the temperature-dependent UV-vis spectroscopy. As expected, through introducing the chromophore, 1 displays fluorescence in both solution and solid state, achieving the coexistence of spin-crossover and fluorescence in one compound.
研究领域:
无机化学
·
分子材料科学
✓ 已验证
DOI
高影响因子
Surfaces and Interfaces
·
2025
·
IF 6.3
Jiangang Kang,Haihong Zhang,Yuehui He,Liang Wu,Hengdi Ye,Jinchao Wei
The novel Ni-Si intermetallic compounds are fabricated by elemental powder metallurgy. This study explores the synthesis of a series of catalysts (Ni-Si-M, M=Co, Fe, Mn) by alloying to augment the low-temperature efficiency of CO oxidation using Ni-Si intermetallic compounds. It is found the low-temperature catalytic activity of Ni-Si-Co, Ni-Si-Fe, and Ni-Si-Mn catalysts are significantly enhanced compared to the original Ni-Si. The catalytic activity among the catalysts ranks as follows: Ni-Si-Co > Ni-Si-Fe > Ni-Si-Mn > Ni-Si. The apparent activation energy (Ea) for Ni-Si-Co was the lowest at 57.3 kJ/mol, suggesting its efficient catalytic oxidation of CO. Additionally, the addition of Co, Fe and Mn elements actually promotes the generation of Ni 2+ as the CO adsorption site in the original Ni-Si. The addition of Co element also leads to the formation of Co 2+ as the adsorption site of O 2 in the process of CO oxidation reaction. The synergistic adsorption of Ni 2+ and Co 2+ to CO and O 2 promotes the CO oxidation reaction. Additionally, the catalysts demonstrate robust long-term stability in atmospheres containing H 2 O and SO 2 , with CO conversion initially suppressed but subsequently recovering and stabilizing at over 90%. This investigation offers novel insights into enhancing the low-temperature activity and stability of catalysts.
研究领域:
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
WATER RESEARCH
·
2020
·
IF 9.13
Panxin Wang,Xu He,Wei Zhang,Jun Ma,Jin Jiang,Zhuangsong Huang,Haijun Cheng,Suyan Pang,Yang Zhou,Xuedong Zhai
As a common animal feed additive, p-arsanilic acid (p-AsA) is thought to be excreted with little uptake and unchanged chemical structure, threatening the environment by potentially releasing more toxic inorganic arsenic. We herein investigated the removal of arsenic by in situ formed ferric (oxyhydr)oxides with the promotion of p-AsA degradation in Fe(II)/peroxydisulfate (PDS) system. Results showed that under acid conditions, p-AsA degraded very quickly and over 99% of p-AsA (5 μM) was degraded within 10 min at the optimal dosage of Fe(II) (100 μM) and PDS (150 μM) at pH 3, while less than 66.4% of arsenic was removed at pH 3–5. Higher pH (3–7) would inhibit the degradation of p-AsA but promote the arsenic removal. At pH 6–7, over 98.5% of total arsenic was removed, while the degradation efficiency of p-AsA was lower than 52.4%. HPLC-ICP-MS results indicated that the arsenic group was cleaved from p-AsA in the form of As(III) and then rapidly oxidized to As(V). FTIR and XPS analysis indicated that both As(V) products and residual p-AsA were bonded to ferric (oxyhydr)oxides via hydroxyl groups. Common cations (e.g., Na + , Ca 2+ , Mg 2+ ) and anions such as Cl − , SO 4 2− , CO 3 2− had no significant influence on arsenic removal, while SiO 3 2− , PO 4 3− and HA inhibited the removal of total arsenic, mainly by affecting the zeta potential of iron particles. In summary, the Fe(II)/PDS process, as an efficient method for partial oxidation and simultaneous adsorption of p-AsA under near-neutral conditions, is expected to control the potential environmental risks of p-AsA.
研究领域:
环境科学
·
化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）