INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2017
·Vol. 42
·期 34
·22294-22301
·
IF 3.582
Jiang Li,Tianmu Lv,Nianjun Hou,Ping Li,Xueli Yao,Lijun Fan,Tian Gan,Yicheng Zhao,Yongdan Li
The effects of Mo doping into the B-site of La 0.3 Sr 0.7 TiO 3-δ perovskite on its ionic conductivity and catalytic activity as an anode material of solid oxide fuel cells have been investigated. The partial substitution of Ti by Mo reduces the bond energy between metal and oxygen ions in the perovskite. The concentration of Mo 5+ /Mo 6+ redox couples increases with the rise of the content of Mo, while the oxygen ionic conductivity decreases simultaneously. The doping of Mo significantly reduces the anodic polarization resistance and improves the performance of the single cell. The cell with La 0.3 Sr 0.7 Ti 0.97 Mo 0.03 O 3-δ anode and La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 3-δ electrolyte exhibits a maximum power density of 135 mW cm −2 at 850 °C with hydrogen as fuel.
研究领域:
材料科学
·
电化学
·
能源材料
·
固态离子学
·
燃料电池技术
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2024
·Vol. 50
·期 9
·15202-15208
·
IF 5.1
Xiong Huang,Pengfei Wang,Jianwei Zhao,Jun Yang,Zhenxiao Fu,Xiuhua Cao,Lei Zhang,Shuhui Yu,Rong Sun
As a dielectric material , BaTiO 3 -based ceramics are desirable for high performance ultra-thin multilayer ceramic capacitors (MLCCs) application. In this work, BaTiO 3 -based dielectric ceramics with superior dielectric properties were synthesized using a reducing atmosphere sintering process . It is found that the contribution of “wet" grain-boundary diffusion become significant as the oxygen partial pressure increases, resulting to a larger grain size and higher permittivity. Especially, for the specimen sintered in higher oxygen partial pressure , the stable temperature coefficient of capacitance (TCC) is dominated by irreversal domain due to the increase of super-lattice phase. Samples with higher oxygen partial pressure exhibit a higher permittivity of 2700 and better permittivity-temperature stability. Furthermore, ultra-thin MLCCs with thickness of 1 μm and capacitance of 10 μF and the TCC of X7R were successfully fabricated. This work provides a comprehensive explanation demonstrating upon the significant roles of grain size and defect engineering in the dielectric performance in BaTiO 3 -based ceramics, and points out an avenue to obtain excellent permittivity-temperature stability in ultra-thin MLCCs.
研究领域:
材料科学
·
电子陶瓷
·
介电材料
·
固态物理
·
功能陶瓷
·
电容器技术
✓ 已验证
DOI
高影响因子
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
·
2024
·Vol. 221
·期 16
·2400342
·
IF 1.9
Jian Cheng,Xin Liu,Weichang Kong,Qingzheng Lei,Zhiyu Yu,Dun Liu
The fabrication of flexible electronics has gained extensive attention due to the growing demand of flexible devices. Among various methods, laser direct writing technology has emerged as a promising approach due to its advantages of high processing accuracy and simplicity. This research focuses on the preparation of copper microelectrodes using laser-induced reduction of CuO nanoparticles (Cu NPs) on polyethylene terephthalate films. First, the influence of various parameters on the conductivity of the copper microelectrodes is investigated. Second, flexible copper microelectrodes with a minimum resistivity of 62.29 μΩ cm and an adhesion grade of 4B level are successfully fabricated. Building upon these results, a capacitive pressure sensor is developed with optimal sensitivity of 3.99 Pa −1 , good hysteresis of 3.99%, and response and recovery times of 1.2 and 1.3 s, respectively. Repeatability tests confirm the sensor's stability and fatigue resistance. This research provides valuable insights for the production of flexible sensors.
研究领域:
生物医学工程
·
柔性电子学
·
传感器技术
·
纳米材料
·
微纳加工
·
可穿戴设备
✓ 已验证
DOI
高影响因子
Small
·
2018
·Vol. 14
·期 34
·1801798
·
IF 9.598
Xiaohong Zou,Qian Lu,Yijun Zhong,Kaiming Liao,Wei Zhou,Zongping Shao
Gel-polymer electrolytes are considered as a promising candidate for replacing the liquid electrolytes to address the safety concerns in Li–O 2 /air batteries. In this work, by taking advantage of the hydrogen bond between thermoplastic polyurethane and aerogel SiO 2 in gel polymer, a highly crosslinked quasi-solid electrolyte (FST-GPE) with multifeatures of high ionic conductivity, high mechanical flexibility, favorable flame resistance, and excellent Li dendrite impermeability is developed. The resulting gel-polymer Li–O 2 /air batteries possess high reaction kinetics and stabilities due to the unique electrode–electrolyte interface and fast O 2 diffusion in cathode, which can achieve up to 250 discharge–charge cycles (over 1000 h) in oxygen gas. Under ambient air atmosphere, excellent performances are observed for coin-type cells over 20 days and for prototype cells working under extreme bending conditions. Moreover, the FST-GPE electrolyte also exhibits durability to protect against fire, dendritic Li, and H 2 O attack, demonstrating great potential for the design of practical Li–O 2 /air batteries.
研究领域:
电化学能源
·
材料科学
·
纳米复合材料
·
先进电池技术
·
固态离子学
✓ 已验证
DOI
高影响因子
Journal of Energy Storage
·
2024
·
IF 8.9
Xueting Yang,Haoyu Deng,Jie Xu,Dezhan Ye,Xiancai Jiang,Yazhou Chen,Ke Sun,Zengjin Liu
1,3-dioxolane (DOL) shows low interfacial impedance and high Coulombic efficiency, thus its polymer electrolytes have attracted extensive attention. In order to initiate DOL polymerization, catalyst amount of LiPF 6 is usually used rather than as the main lithium salt . Totally replacement of LiTFSI with low cost of LiPF 6 could bring the heat explosion and high viscosity when mixing DOL with 0.9 M LiPF 6 electrolyte (carbonate ester solvent). Here, based on the Lewis acid-base interaction, a new type of Lewis base, pyridine, is added to control the explosive polymerization of 1,3-dioxolane in LiPF 6 electrolyte. Through tuning the pyridine content, the gelling process and electrochemical properties could be controlled. It is demonstrated that the optimized monomer conversion and electrochemical window are up to 85.2 % and 4.6 V; meanwhile, the optimized conductivity and transfer number are 0.99 × 10 −3 S/cm (25 °C) and 0.68, respectively. The stable interface between PDOL and lithium metal anode could be proved by the stable over-potential (50mv, 700 h) at current density of 0.5 mA cm −2 . After 500 cycles at 2C, the assembled Li/PDOL@py 0.125 /LiFePO 4 battery delivers 115 mAh/g and 90 % capacity retention, with high average Coulombic efficiency of 99.83 %. The present results demonstrate the heat suppression role of pyridine toward mixing DOL with 0.9 M LiPF 6 electrolyte, which solves the heat and viscosity problems for PDOL based gelling polymer electrolytes .
研究领域:
电化学
·
高分子化学
·
能源材料
·
锂离子电池
·
界面化学
·
功能材料
✓ 已验证
DOI
高影响因子
Journal of Materiomics
·
2022
·Vol. 9
·期 3
·568-576
·
IF 8.589
Qiujun Wang,Weiqi Zhu,Ya Su,Di Zhang,Zhaojin Li,Huan Wang,Huilan Sun,Bo Wang,Dan Zhou,Li-Zhen Fan
Lithium metal batteries based on solid electrolytes are considered as promising candidates with high energy density and safety. However, the weak solid-solid contact between electrolyte and electrode can easily lead to interface instability and lithium ions discontinuous migration, which seriously reduces the electrochemical performance of the battery. Herein, we construct a soft gel interfacial layer to improve the stability of the solid-solid interface between electrolyte and electrode by means of polyester-based monomers and imidazole-based ionic liquids. Based on this, garnet-type Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) particles as inorganic ceramic filler were introduced in the layer to obtain composite electrolytes with high ionic conductivity (up to 1.1 × 10 −3 S/cm at 25 °C). As a result, the assembled lithium symmetric battery of Li|THCE-15%LLZTO|Li suggests excellent cycling stability with 700 h at 0.1 mA/cm 2 at 50 °C, and the lithium metal batteries of LFP|THCE-15%LLZTO|Li delivers high initial discharge capacity of 128.2 mA ·h/g with capacity retain of 75.48% after 150 cycles at 2 C. This work paves a new route to build safe and stable lithium metal batteries with synergistic introduction of composite electrolytes between electrolyte and electrode using soft gel interfacial layer and inorganic filler.
研究领域:
电化学
·
材料科学
·
能源存储
·
固体离子学
·
界面工程
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2022
·
IF 9.794
Wei Feng,Huirong Liu,Mingliang Zhao,Jianling Li,Feiyu Kang
The poly(ethylene oxide) based composite solid electrolyte(PEO-CSE) is an effective solution for developing high-performance solid-state lithium battery . However, the poly(ethlene oxide)(PEO) based solid-state lithium battery using 4.0 V cathode suffers from severe interfacial instability problems. In this work, we add additive lithium difluorophosphate(LiPO 2 F 2 ) into the PEO-CSE to form a stable and low resistance interphase at the cathode/electrolyte interface during charge/discharge process. The electrochemical stability window of PEO-CSE increases to ∼5.0 V. Besides, the electrochemical performance of PEO based solid-state lithium battery with LiCoO 2 as cathode is excellent. The discharge capacity of LiCoO 2 /Li cell with LiPO 2 F 2 reaches 108.5 mAh g −1 at 1.0C. In contrast, the discharge capacity that without LiPO 2 F 2 is only 60.0 mAh g −1 . Meanwhile, the PEO-CSE with LiPO 2 F 2 cell delivers stable cycle performance at 4.2 V. The capacity retention maintains 88.5% compared with 16.1%(without LiPO 2 F 2 ) after 100 cycles. Furthermore, it's still maintains 83.3% after 150 cycles. In addition, the cathode/electrolyte interface is analyzed by transmission electron microscope(TEM) and X-ray photoelectron spectroscopy(XPS). Galvanostatic intermittent titration test(GITT) is used to analyze the dynamic diffusion performance. This strategy provides a simple and effective way to improve the high voltage stability of the cathode/electrolyte interface.
研究领域:
电化学
·
材料科学
·
能源存储
·
固态电池
·
界面工程
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2022
·
IF 8.025
Jian Wang,Zhiyu Xun,Chenyang Zhao,Yang Liu,Jiyou Gu,Pengfei Huo
Soy protein isolate (SPI) is one of the most abundant plant proteins in nature. Enormous studies have been carried out on SPI-based materials, however, the application for energy storage devices is still limited due to its fiddly film forming process and lack of electrochemical performance. Herein, we presented a SPI-based polymer electrolyte by grafting modification with the hydrophilic functional monomer acrylamide (AM). The optimized gel polymer electrolyte (GPE) exhibited an excellent ionic conductivity up to 5.10 mS cm −1 , which was greatly higher than gel polymer electrolyte based on original pure SPI (1.84 mS cm −1 ). More significantly, supercapacitors constructed by grafting-modified SPI delivered a specific capacitance of 141.74 F g −1 at 1.0 A g −1 and exhibited high capacitance retention of 95% after 8000 charge−discharge cycles. Beyond that, redox-active polymer electrolyte based on grafting-modified SPI combining with KI enormously improved the energy density of supercapacitor up to 27.52 Wh kg −1 at a current density of 0.5 A g −1 . This work provided a novel and facile strategy to obtain a high-performance SPI-based polymer electrolyte and laid an experimental foundation for the high-value application of SPI in the field of energy storage devices.
研究领域:
材料科学
·
高分子化学
·
能源存储
·
生物基材料
·
电化学
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2020
·
IF 6.182
Shuya Wang,Yaxin Chen,Bin Cui,Bo Li,Shuxuan Wang,Yanhua Cui,Zhicheng Ju,Quanchao Zhuang
Computer simulation accelerates the selection and application of new electrode materials. The First-principles calculations based on density functional theory (DFT) are performed to evaluate the performance as cathode for Potassium ion batteries (PIBs) on the structure, electronic conductivity and ionic diffusion of O-doped KMnF 3 . After taking comprehensive consideration of the calculation results, the nanostructured O-doped KMnF 3 was synthesized and the structure and electrochemical properties were further improved by carbon coating. Here, we report a new etch pathway to create a new class of carbon-coated perovskite fluoride to improve the performance of PIB in terms of rate capability and cycle stability. These new material design concepts will help discover and synthesize new materials for PIBs.
研究领域:
材料科学
·
电化学
·
计算材料学
·
能源存储
·
无机化学
·
纳米材料
·
固体物理
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2019
·
IF 7.467
S.Z. Zhang,X.L. Wang,X.H. Xia,Z.J. Yao,Y.J. Xu,D.H. Wang,D. Xie,J.B. Wu,C.D. Gu,J.P. Tu
Interfacial issues have been the main obstacle to the development of solid-state batteries . In this work, we design a solid hybrid polymer electrolyte based on poly-(ethylene glycol) diacrylate and succinonitrile (PSSE) with a liquid state precursor. An intimate interface between PSSE and Li 4 Ti 5 O 12 @vertical graphene (LTO@VG) electrode with three-dimensional array structure is cleverly constructed by infiltrating fluid precursor of PSSE into vertical pores of LTO@VG followed by polymerization and solidification of PSSE. The quasi-solid-state LTO@VG//PSSE//Li and LiFePO 4 //PSSE//LTO@VG full cells exhibit superior electrochemical performance since the active materials are closely contacted by the conductive skeleton and ion-conductive electrolyte. The LTO@VG//PSSE//Li cells maintain 85.7% capacity retention after 400 cycles at 2 C and the LFP//PSSE//LTO@VG full cells still reach 99.0% capacity retention after 200 cycles at 0.5 C. This novel strategy for interface engineering paves the way for achieving high-performance solid-state batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
纳米材料
·
界面科学
✓ 已验证
DOI
高影响因子
Small
·
2019
·Vol. 15
·期 30
·1902280
·
IF 10.856
Xijun Wei,Wanping Hu,Huarong Peng,Yuli Xiong,Peng Xiao,Yunhuai Zhang,Guozhong Cao
High energy and efficient solar charging stations using electrochemical capacitors (ECs) are a promising portable power source for the future. In this work, two kinds of metal-organic framework (MOF) derivatives, NiO/Co 3 O 4 microcubes and Fe 2 O 3 microleaves, are prepared via thermal treatment and assembled into electrochemical capacitors, which deliver a relatively high specific energy density of 46 Wh kg −1 at 690 W kg −1 . In addition, a solar-charging power system consisting of the electrochemical capacitors and monocrystalline silicon plates is fabricated and a motor fan or 25 LEDs for 5 and 30 min, respectively, is powered. This work not only adds two novel materials to the growing categories of MOF-derived advanced materials, but also successfully achieves an efficient solar-ECs system for the first time based on all MOF derivatives, which has a certain reference for developing efficient solar-charge systems.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
可再生能源
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Xin-yu Hu,Mao-xiang Jing,Hua Yang,Quan-yao Liu,Fei Chen,Wei-yong Yuan,Le Kang,Dong-hong Li,Xiang-qian Shen
Poor room-temperature ionic conductivity and lithium dendrite formation are the main issues of solid electrolytes. In this work, rod-shaped alumina incorporation and graphite coating were simultaneously applied to poly (propylene carbonate) (PPC)-based polymer solid electrolytes (Wang et al., 2018). The obtained alumina modified solid electrolyte membrane (Al-SE) achieves a high ionic conductivity of 3.48 × 10 −4 S/cm at room temperature with a wide electrochemical window of 4.6 V. The assembled NCM622/Al-SE/Li solid-state battery exhibits initial discharge capacities of 198.2 mAh/g and 177.5 mAh/g at the current density of 0.1 C and 0.5 C, with the remaining capacities of 165.8 mAh/g and 161.3 mAh/g after 100 cycles respectively. The rod-shaped structure of Al 2 O 3 provides fast transport channels for lithium ions and its Lewis acidity promotes the dissociation of lithium salts and release of free lithium ions. The lithiophilic Al 2 O 3 and Graphite form intimate contact with metallic Li and create fast Li + conductive layers of Li-Al-O layer and LiC 6 layer, thus facilitating the uniform deposition of Li and inhibiting Li dendrite formation during long-term cycling. This kind of composite Al-SE is expected to provide a promising alternative for practical application in solid electrolytes.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
纳米复合材料
·
锂金属电池
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）