JOURNAL OF MATERIALS SCIENCE
·
2019
·Vol. 54
·期 9
·6853-6866
·
IF 3.442
Jin Manman,Guo Zhenmei,Lv Zhiguo
An efficient hybrid mesoporous heterogeneous catalyst system was synthesized via covalently grafting tungsten chelate complex W- N , N ( N , N = (3-triethoxysilylpropyl) [3-(2-pyridyl)-1-pyrazolyl] acetamide, N,N -chelating ligand) in organic moieties (diphenyldichlorosilane, DPHS)-functionalized mesoporous silica SBA-15 or pure SBA-15. Characterization of synthesized materials via N 2 sorption, XRD, TEM, UV–Vis DRS, 29 Si MAS NMR, element analysis, and FT-IR indicated that W- N , N was successfully anchored and highly dispersed in the mesochannels of SBA-15 and the mesostructure of SBA-15 was maintained during the grafting course. The synthesized hybrid catalysts were highly active and authentically heterogeneous in triphasic oxidation reaction of cyclopentene (CPE) with H 2 O 2 . W, N - N immobilized on functionalized SBA-15 with DPHS moieties (W- N , N -DPHS-SBA-15) showed better catalytic properties (activity and stability) than its unmodified counterpart W- N , N -SBA-15 catalyst. Besides, possible catalytic reaction route for CPE oxidation with H 2 O 2 over W- N , N -DPHS-SBA-15 catalyst was proposed. The amphiphilic mesochannels of W- N , N -DPHS-SBA-15 provided suitable accommodation for both hydrophilic H 2 O 2 and hydrophobic CPE molecules and acted as nanoreactors for CPE/H 2 O 2 /solid triphase reaction.
研究领域:
催化化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2014
·Vol. 43
·期 22
·8461-8468
·
IF 4.097
Zhuqing Wang,Min Wang,Genhua Wu,Dayu Wu,Aiguo Wu
SBA-15 functionalized with N-[3-(trimethoxysilyl)propyl]ethylene-diamine (TPED) was synthesized and used for the colorimetric detection of Cu2+ and removal of heavy metal ions in aqueous solutions. Compared to free SBA-15, the adsorption ability of diamine-functionalized SBA-15 (depicted as SBA-TPED) increased remarkably, the maximum adsorption capacity of SBA-TPED for Cu2+, Pb2+ and Zn2+ was 27.22, 96.43 and 12.16 mg g−1, respectively. Furthermore, SBA-TPED exhibits high selectivity for Cu2+ with the relative selectivity coefficient of SBA-TPED for Cu2+/Pb2+ being over 10 and for Cu2+/Zn2+ being over 60. The naked-eye detection limit of SBA-TPED for Cu2+ is 0.95 ppm, and the determination of Cu2+ in real water samples also displays satisfactory results. Moreover, SBA-TPED possesses fast kinetics for removing Cu2+ with a saturation time of less than 30 min, and can be regenerated by simple acid treatment.
研究领域:
环境科学
·
分析化学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2024
·
IF 8.4
Taipu Chen,Lei Chen,Yutong Zhao,Jinkai Hao,Zhigang Shao
To tackle the challenges of phosphoric acid (PA) leakage and suboptimal proton transfer efficiency in PA-polybenzimidazole (PBI) high-temperature proton exchange membranes (HTPEMs), this research has pioneered the development of a novel porous silicon material, DP/S15, which has been tailored through organic phosphonic acid modification. S15 or DP/S15 was utilized to fabricate PBI composite membranes and subjected these membranes to a thorough examination of their properties. The integration of DP/S15 into the membrane matrix notably enhanced acid uptake and facilitated the formation of a robust and extensive proton transportation network. This was largely attributable to the synergistic interaction between the organic phosphonic acid groups in DP/S15 and PA. As a result, the membranes incorporating DP/S15 exhibited a host of commendable properties, most notably their substantial mechanical strength , which registered at 89.80 MPa with undoped PA and 13.10 MPa with doped PA. Furthermore, theoretical analyses lent credence to the efficient adsorption between DP/S15 and phosphoric acid. Consequently, the composite membranes delivered superior performance metrics, evident in their high conductivity (reaching 57.7 mS cm −1 at 160 °C) and excellent PA retention capabilities (up to 89.5 %). Of paramount significance was the performance of the single fuel cell equipped with the PA-DP/S15-PBI composite membrane, which achieved a peak power density of 672.29 mW cm −2 . This figure impressively surpassed that of the pure PBI membrane by 262.23 mW cm −2 . In light of these promising outcomes, the PA-DP/S15-PBI composite membrane harbors significant potential for deployment in HT-PEMFCs.
研究领域:
材料科学
·
能源工程
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2012
·
IF 2.159
Yan-Jing Gu,Bing Yan,Yan-Yan Li
Novel organic–inorganic mesoporous luminescent polymeric hybrid materials containing europium(III) complexes incorporated to mesoporous silica SBA-15/SBA-16 have been prepared by simple physical doping (impregnation) methods, followed by the addition polymerization reaction of the monomer 4-vinylpyridine (vpd) extending along the mesoporous channels. The precursor europium(III) complexes are synthesized by β-diketonate (β-diketonate=2-thenoyltrifluoroacetonate (tta), hexafluoroacetylacetonate (hfac), trifluoroacetylacetonate (taa)) and monomer 4-vinylpyridine (vpd) coordinated to Eu 3+ , and SBA-15/SBA-16 are obtained via a sol–gel process. After the physical doping and the polymerization reaction , the final ternary materials Eu(β-diketonate) 3 pvpd-SBA-15/Eu(β-diketonate) 3 pvpd-SBA-16 (β-diketonate=tta, hfac, taa) are received. The physical properties and espeically the photoluminescence of these hybrids are characterized, and the XRD and BET results reveal that all of these hybrid materials have uniformity in the mesostructure. The detailed luminescence investigation on all the materials show that Eu(tta) 3 pvpd-SBA-16 have the highest luminescence intensity and the materials with taa ligands have longer lifetimes.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2019
·
IF 3.973
Hongjian Wen,Xinhua Zhou,Zhichuan Shen,Zhicheng Peng,Huayao Chen,Li Hao,Hongjun Zhou
Polyethyleneimine (PEI) was immobilized on SBA-15 for obtaining polyethyleneimine-modified silica [email protected] ( [email protected] , [email protected] , and [email protected] ). With the coordination from PEI, zinc ions were impregnated on the [email protected] , and then, Zn 2+ [email protected] were calcined at 550 ℃ to obtain the nano zinc oxide loaded on the mesoporous silica, ZnO-SBA-15s (ZnO-SBA-1.0, ZnO-SBA-1.5, and ZnO-SBA-2.0). The anti-bacterial activity of ZnO-loaded SBA-15 was; thereafter, assessed by the zone of inhibition and enzyme labeling methods. The results confirmed that the coordination ability of the imino groups in PEI helped adsorb more zinc ions during the process of impregnation so that more nano-ZnO could be supported on the surface of SBA-15. The modification did not change the mesostructure of the two-dimensional hexagonal phase and orderliness of SBA-15. At the mass ratio of PEI:SBA-15 = 1.0:1, 1.5:1, and 2.0:1, the concentration of zinc element (wt.%) was measured by inductively coupled plasma optical emission spectrometry as 2.5, 2.56, and 3.5% for ZnO-SBA-1.0, ZnO-SBA-1.5, and ZnO-SBA-2.0, respectively. The size of inhibition of SBA-15, ZnO-SBA-0, ZnO-SBA-1.0, ZnO-SBA-1.5, and ZnO-SBA-2.0 were 0, 1.14 ± 0.01, 2.56 ± 0.01, 2.58 ± 0.01, and 2.69 ± 0.02 cm, respectively. ZnO-SBA-15s suppressed the growth of Escherichia coli compared to blank SBA-15 in a ZnO dose-dependent manner.
研究领域:
材料科学
·
纳米技术
·
生物技术
·
微生物学
✓ 已验证
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2014
·
IF 6.007
Xingfa Li,Xin Liu,Lili Xu,Yuezhong Wen,Jianqing Ma,Zucheng Wu
Heterogeneous Pd catalytic Fenton-like systems with in-situ-generated H 2 O 2 have recently gained significant attention for wastewater treatment. Intense research efforts have been focused on developing highly efficient Fenton-like catalysts. It is known that nanoparticle size and appropriate coordination of active compositions are important for the fabrication of a highly efficient multicomponent catalyst. Unfortunately, effects of these factors on Fenton-like reaction are still unknown. To decipher the puzzle, we designed multicomponent Pd/PdO/Fe 2 O 3 nanoparticles in SBA-15 (denoted as FePd-SBA) as a Fenton-like catalyst which possesses uniform and highly dispersed nanoparticles (small size about 5 nm) in space-confined channels of SBA-15. The fabricated catalyst shows high catalytic activities in Fenton-like reaction for dye degradation. For example, 98.6% removal of dye Acid Red 73 was obtained under in-situ generation of hydrogen peroxide. In contrast, when the catalyst loaded on SiO 2 without channels or pores (FePd–SiO 2 ) was prepared, and compared with FePd–SBA, FePd–SiO 2 showed noticeably poor performance (51.6%) under same conditions. Obviously, such a difference in results is due to the confinement effect of SBA-15 porous channels. It was also found that Fe and Pd played important roles in the synergistic effect, that is, Pd worked in in-situ H 2 O 2 generation and Fe species worked in decompose H 2 O 2 to degrade organic pollutants. When we applied this catalyst for Fenton-like reaction with addition of H 2 O 2 , it was also found that Pd and PdO played important roles and the synergistic effect between Fe and Pd species actually existed in dye removal. The unique nanostructure makes the catalyst to be a novel and welcoming choice for H 2 O 2 favorite reactions.
研究领域:
环境科学
·
催化化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2018
·
IF 3.649
Yan-Yun Meng,Qing-Da An,Zuo-Yi Xiao,Shang-Ru Zhai,Zhan Shi
Through hydrothermal synthesis and impregnation-reduction processes, a series of Pd-based nanocomposites using N-doped carbon layers coated ZrSBA-15 as the supports have been manufactured, aiming to upgrade the catalytic activity and stability of the catalysts. Pentaethylenehexamine (PEHA) was served as a nitrogen source to generate N-doped carbon (CN) layers that were pre-deposited into the acidic platelet framework ZrSBA-15, and then followed by introducing Pd 0 nanoparticles (NPs) onto it, finally leading to the formation of target composite Pd/CN-ZrSBA-15. The samples were characterized by XRD , TEM, SEM, N 2 adsorption-desorption isotherm, FTIR, XPS etc. The catalytic performance of as-prepared catalysts was evaluated by the aerobic oxidation of benzyl alcohol and the reduction of 4-NP, respectively. Duo to the platelet-like morphology with shortened channels and the modification of N-doped carbon layers, which could effectively decrease pore blocking in the process of preparation and reactions as well as enhance the metal-support interaction, the derived catalysts could afford 85% conversion of benzyl alcohol and 100% selectivity of benzaldehyde, and the conversion of 4-NP was also up to 96%. More remarkably, the catalysts could be reused at least ten times without significantly loss in catalytic activity.
研究领域:
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2017
·
IF 3.615
Rong He,Zhihong Wang,Lei Tan,Yi Zhong,Weiming Li,Da Xing,Chaohai Wei,Youwen Tang
We developed two types of novel highly ordered Ni 2+ imprinted mesoporous organosilica materials (SBA-15 (NiIMS1) and MCM-41 (NiIMS2)) through co-condensation for selective adsorption of Ni 2+ from electroplating Ni 2+ effluents. FTIR and solid-state 13 C NMR spectra demonstrated the successful embedment of functionalized iminodiacetic acid and ethanediamine chelating groups in NiIMS1 and NiIMS2, respectively. X-ray photoelectron spectroscopy analysis confirmed that Ni 2+ was coordinated by N atom and carboxyl O atom of the functional groups. Furthermore, NiIMS1 and NiIMS2 displayed highly ordered periodic hexagonal P6mm meso-structure, large surface area, and highly specific recognition ability toward Ni 2+ . The adsorption experimental results proved that NiIMS1 was suitable for acidic wastewater treatment , whereas NiIMS2 was fit for alkaline wastewater. The saturated adsorption capacity of NiIMS2 was 20.8 mg/g at pH 6.0, and that of NiIMS1 reached up to 22.9 mg/g at pH 3.0. The values of selectivity coefficients of NiIMS1 and NiIMS2 for five competing metal ions ranged from 46.4 to 12.4 and 36.9 to 18.8, respectively. The adsorption efficiency of NiIMS1 was above 92.5% even after seven extraction-stripping cycles, while that for NiIMS2 was 90.9%. The real sample adsorption experiments demonstrated that these mesoporous organosilica materials have high potential for water treatment applications.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2021
·Vol. 29
·期 1
·49-61
·
IF 2.496
Liu Wei,Zhang Guoliang,Hao Songyuan,Yuan Hong,He Weidong
Waste cooking oils (WCOs) are a cheap and rich source of carbon and hydrogen, and they exhibit great potential for the preparation of hydrogen gas and carbon nanomaterials. Here, we prepared three Pt–Ni/SBA-15 catalysts with Pt contents ranging from 0 to 2% to examine their activity in the catalytic cracking of WCO towards the production of hydrogen and carbon nanotubes (CNTs). A mixture of soybean oil, oleic acid and animal fat was used as a model compound of WCO, and the catalysts were characterised by inductively coupled plasma–optical emission spectrometry, scanning and transmission electron microscopy, X-ray diffraction, N 2 adsorption–desorption isotherms, temperature programmed reduction, thermogravimetric analysis and Raman spectroscopy. The effect of Pt loading and cracking temperature on the hydrogen production and the quality of CNTs was also evaluated. Among the prepared catalysts, 2%Pt–30%Ni/SBA-15 showed excellent catalytic activity at 750 °C, affording a maximum hydrogen content of 66.2 vol%, while CNTs with diameters of 20–100 nm and high crystallinity, oxidation stability, graphitisation and purity were also prepared.
研究领域:
能源科学
·
材料科学
·
环境科学
✓ 已验证
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2025
·
IF 3.9
Dayu Sun,Panli Liu,Huijun Liu,Zhixiu Yang,Lijing Gao,Ruiping Wei,Xiaomei Pan,Guomin Xiao
Furfural, a promising biobased platform chemical, can be derived from xylan through an acid-catalyzed dehydration process. However, the yield of furfural in the aqueous phase is often limited by side reactions (furfural degradation). Employing a biphasic solvent system for in situ furfural extraction presents a strategy to mitigate furfural degradation as furfural is more stable in some organic phases, reducing the polymerization with reaction intermediates in the aqueous phase. In this study, a novel energy-efficient process was developed for the enhanced production of furfural from corncob xylan in a biphasic solvent system. A series of niobium-modified SBA-15 solid acid catalysts for furfural production were synthesized and characterized to determine the physical properties, structure, and crystallinity. The toluene/H2O biphasic system was selected to intensify the furfural production and reduce subsequent separation costs. The experimental parameters including niobium doping of catalyst, reaction time, reaction temperature, catalyst input, and xylan input were optimized to obtain high furfural yield. The process model for production and purification of furfural was established based on experimental data, and the results demonstrated that the furfural purification section in the proposed process reduced cold energy consumption by 64.08% and heat energy consumption by 70.29% compared to the conventional process.
研究领域:
生物化学
·
催化化学
·
能源化学
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Communications
·
2024
·
IF 3.7
Peihang Shen,Zelong Liu,Yibo Zhang,Zelin Meng,Mingyang Song,Heming Zhao,Jianglei Hu,Fengwei Shi
Vinyl-functionalized SBA-15 was synthesised using a one-pot co-condensation method followed by carboxylation via nitric acid, with the intermediate product named SBA-15C. MIL-68 was then synthesised in-situ by adsorption of Al 3 + ions via carboxylate groups on SBA-15C to give the composite xMIL-68(Al)@SBA-15C. A series of characterizations were conducted by Fourier transform infrared spectroscopy, Brunner-Emmet-Teller measurements, X-ray diffraction, X-ray photoelectron spectroscopy, Scanning electron microscope, and Transmission Electron Microscope. xMIL-68(Al)@SBA-15C maintained robust catalytic performance in the NaBH 4 -mediated reduction of 4-nitrophenol to 4-aminophenol, with no significant decrease in activity after five cycles of reuse.
研究领域:
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2012
·
IF 3.07
Yan-Jing Gu,Bing Yan
A series of new visible and near-infrared (NIR) luminescent lanthanide-hydroxybenz[de]anthracen derivatives (Ln(HBAN) 3 (H 2 O) 2 (NO 3 ) 3 , Ln(HBAN) 3 phen(NO 3 ) 3 ) were synthesized (HBAN-6-hydroxybenz[de]anthracen-7-one, Ln = Eu, Yb, Nd). Further, chemically bonded lanthanide hybrids of functionalized mesoporous silica (SBA-15) are prepared using HBAN-functionalized alkoxysilane (HBAN-Si) as linker, which is named as Ln(HBAN-SBA-15) 3 (NO 3 ) 3 , Ln(HBAN-SBA-15) 3 phen(NO 3 ) 3 (Ln = Eu, Yb, Nd), respectively. The physical characterization and especially the photoluminescence properties for these hybrids are performed. SAXRD and BET of them revealed that all of these hybrid materials have uniformity in the mesostructure. Worth noting here is that the excitation spectra of these hybrid materials are extended to visible light region (439–535 nm). Upon ligand-mediated excitation with the ultraviolet and visible light, the visible luminescence for europium hybrids and NIR luminescence for Yb 3+ and Nd 3+ hybrids are obtained.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）