BIOSENSORS & BIOELECTRONICS
·
2023
·
IF 12.6
Huanhuan Li,Wenhui Geng,Zhixiong Qi,Waqas Ahmad,Suleiman A. Haruna,Quansheng Chen
In this work, a stimuli-responsive SERS biosensor was fabricated for tetracycline (TTC) by “signal-on” strategy using (EDTA)-driven polyethyleneimine grafted calcium carbonate ( [email protected] 3 ) microcapsule and chitosan-Fe magnetic microbeads ( [email protected] ). Initially, aptamer conjugated magnetic-bead [email protected] @Apt with superparamagnetism and excellent biocompatibility was employed as capture probe, which facilitated the rapid and easy magnetic separation. Subsequently, the PEI cross-linked layer and aptamer network layer were constructed onto the outer layer of CaCO 3 @4-ATP microcapsule to form sensing probes ( [email protected] 3 @ [email protected] ) via the layer-by-layer assembly method. In the presence of TTC, a sandwich SERS-assay was exploited by aptamer recognition induced target-bridged strategy. When the solution of EDTA was added, the core layer of CaCO 3 would be dissolved quickly, destroying the microcapsule to release 4-ATP. The released 4-ATP could be quantitatively monitored by dripping the supernatant onto the [email protected] SERS platform, resulting in a strong Raman “signal-on”. Under the optimal conditions, a good linear relationship was established with a correlation coefficient ( R 2 ) of 0.9938 and a LOD of 0.03 ng/mL. Additionally, the application capacity of the biosensor to detect TTC was also affirmed in food matrixes, and the results were consistent with the standard ELISA method ( P > 0.05). Hence, this SERS biosensor affords extensive application prospects for TTC detection with multiple merits such as high sensitivity, environment friendliness, and high stability.
研究领域:
分析化学
·
环境科学
·
食品安全
·
生物传感器
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CRYSTENGCOMM
·
2018
·Vol. 21
·期 11
·1691-1700
·
IF 3.304
Zhikun Wang,Wenfeng Han,Huazhang Liu
Uniform, free-standing and cubic SrF2 microparticles were successfully fabricated by a facile hydrothermal method with ethylenediaminetetraacetic acid (EDTA) as the chelating agent. The influences of preparation conditions, such as the pH value, amount of EDTA and hydrothermal time, on the formation of SrF2 crystals were investigated. The formation mechanism of cubic SrF2 particles was proposed based on the experimental results. Following calcination in air at 500 °C, SrF2 particles were evaluated as the catalyst for the pyrolysis of 1-chloro-1,1-difluoroethane (HCFC-142b, CH3CClF2) to vinylidene fluoride (VDF, CH2CF2) at 350 °C and a space velocity of 600 h−1. The results indicate that SrF2 cubes exhibit high catalytic activity with a HCFC-142b conversion of about 70% and a selectivity to VDF of 80–87%. No significant deactivation was observed within the time on stream of 30 h. With the reaction temperature increased to 450 °C, the conversion of HCFC-142b is close to 94%, while the selectivity to VDF remains almost unchanged. Although the SrF2 catalyst prepared by the conventional precipitation method also shows high conversion, its selectivity to VDF is only around 50–70%. We suggest that the surface acidity and specific surface area play major roles in the catalytic performance. Compared with the temperatures for industrial manufacture of VDF of 650–700 °C, the SrF2 catalysts provide a promising pathway to produce VDF at much lower temperatures.
研究领域:
化学工程
·
材料科学
·
催化
·
环境化学
✓ 已验证
产品关联
DOI
高影响因子
FOOD HYDROCOLLOIDS
·
2020
·
IF 7.053
Xin-Sheng Qin,Zhi-Gang Luo,Xiao-Lin Li
In this study, we demonstrated the role of W 1 /O/W 2 double emulsion with alginate-Ca-EDTA system on the gastrointestinal digestion viability of Lactobacillus Plantarum strain liquid. The W 1 /O/W 2 double emulsion was prepared by WPI-EGCG covalent conjugate nanoparticles with compartmented multiple-emulsion nature. The effects of preparation parameters containing polyglycerol polyricinoleate content, oil fraction, and WPI-EGCG covalent conjugate particle concentration on the formation of W 1 /O/W 2 double emulsions were systematically studied. Then, the rheological properties of alginate-Ca-EDTA system in the external aqueous phase of the W 1 /O/W 2 double emulsions as the pH changes were investigated. The W 1 /O/W 2 double emulsion maintained in the hydrogel state at pH below 4.0 because of Ca 2+ coupled with G residues of alginate . In contrast, the W 1 /O/W 2 double emulsion transformed to solution state at neutral pH condition, which caused the dissociation of Ca 2+ from the Ca-alginate hydrogel and resulted in Ca-EDTA chelation. A pH-sensitive carrier based on an alginate-Ca-EDTA system in a set-type W 1 /O/W 2 double emulsion model was exploited by regulating the release of Ca 2+ . Based on the pH-sensitive alginate-Ca-EDTA system and middle oil phase resistance, such a double emulsion supplied a colon-targeted release carrier for the Lactobacillus Plantarum strain liquid encapsulation into inner aqueous phase with the functional protection effect. The results offer a promising strategy for probiotics strain liquid encapsulation of double emulsion delivery systems in oral applications of foods (such as yogurt, fruit juice or cheese) and pharmaceuticals.
研究领域:
食品科学
·
制药技术
·
生物技术
✓ 已验证
产品关联
DOI
高影响因子
CHEMOSPHERE
·
2019
·
IF 5.108
Huajing Zhou,Jun Luo,Yuancai Chen
Ethylenediaminetetraacetic acid (EDTA) could form stable complexes with toxic metals such as nickel due to its strong chelation. In this study, with the same doping level of Co and N, MoO 2 and ZIF-67 were used as precursors to prepare MoO 2 @Co/N and FeC@Co/N electrocatalysts for the modified graphite felt cathodes in heterogeneous-electro-Fenton-like reaction (HEFL) system. The X-ray diffraction and X-ray photoelectron spectroscopy results indicated that both of the catalysts are dominated with pyridinic N (2.42% and 2.82%) upon co-doping Co/N, and FeC@Co/N exhibited an obviously higher additional sp -hybridized nitrogen ( sp -N) peak. The co-doping of Co/N induced the lattice modifications to produce more lattice defects, where pyridinic N and sp -N, related with the active sites (C–N, Co-Nx), were formed at near-ring defects along sheet edges through the nitrogen replacement of C C groups. FeC@Co/N demonstrated superior oxygen reduction reaction catalytic activity in terms of Cyclic Voltammetry and Rotating Ring-disk Electrode, and exhibited the remarkably higher current density (30 mA) and lower onset potential (−0.208 V) in Linear Sweep Voltammetry analysis. In the FeC@Co/N/CF modified HEFL system, despite the generated H 2 O 2 concentrations (62.5 mg L −1 ) is not very high, the reducing reaction of ≡Fe(III)/Co(III)–OH could get the electron directly from the cathode, which would greatly reduce the consumption of H 2 O 2, high utilization efficiency of H 2 O 2 (η: 87.63%) could greatly improve the EDTA-Ni removal (97.5%) and TOC (92.6%). This work demonstrates the feasibility of utilizing FeC@Co/N/CF as a cathode for breaking metal-complex in HEFL process.
研究领域:
环境科学
·
电化学
·
材料科学
·
催化
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2018
·
IF 6.735
Amina,Xiongyuan Si,Kang Wu,Youbin Si,Balal Yousaf
In this study, a modified Fenton system using calcium peroxide (CaO 2 ) powder, as an effective source of hydrogen peroxide (H 2 O 2 ), for the degradation of sulfamethoxazole (SMX) in aqueous solution was investigated. Our results indicated that degradation of SMX in Fe(II)-EDTA catalyzed CaO 2 system was readily more efficient than in Fe(II) catalyzed CaO 2 system. The SMX degradation efficiency was found maximum at pH 6.0 and SMX degradation was suppressed as the initial solution pH was increased. Nevertheless overall removal efficiency in this system was favorable near to neutral pH. In addition, it was observed that the higher bicarbonates (HCO 3 − ) contents had a considerable scavenging ability to SMX degradation while low concentration exhibited auspicious role. The presence of chlorides (Cl − ), nitrates (NO 3 − ), sulfates (SO 4 2− ), and humic acid (HA) could improve SMX removal in this Fenton-like system. Furthermore, chemical probe and radical scavenging activity confirmed the formation of hydroxyl (HO ) and superoxide (O 2 − ) radicals, and also described that the SMX degradation was predominantly due to the HO -induced oxidative destruction. Electron paramagnetic resonance (EPR) studies for different systems, different pH values and different reaction times were carried out to determine the HO radical intensities. EPR results showed that HO intensities were higher in Fe(II)-EDTA catalyzed CaO 2 system, at pH 6.0 and at 90 s reaction time, respectively. Intermediate products of SMX were identified and possible mechanism of SMX degradation was suggested. In conclusion, this work provided comprehensive knowledge for the use of Fe(II)-EDTA catalyzed CaO 2 system for remediation of SMX contaminated sites.
研究领域:
环境科学
·
水处理
·
化学工程
·
污染控制
✓ 已验证
产品关联
DOI
高影响因子
DENTAL MATERIALS
·
2025
·
IF 6.3
Jiahui Huang,Hongxia Zhang,Xiangyu Zhang,Yueyue Wang
Objective The aim of this study was to (1) graft ethylenediamine tetraacetic acid (EDTA) onto mesoporous SiO 2 (mSiO 2 ) fillers to fabricate Ca 2+ and Zn 2+ rechargeable dental composites, (2) investigate the effect of EDTA modification on the properties of the composite resins. Methods EDTA modified mSiO 2 (mSiO 2 -EDTA) were prepared by a facile one-step silylating reaction. Ca 2+ and Zn 2+ were adsorbed onto mSiO 2 -EDTA via an ion solution immersing method to obtain mSiO 2 -EDTA-Ca and mSiO 2 -EDTA-Zn. The ion release behavior and recharge ability of the particles was investigated. Different mass fractions (5, 10, and 20 %) of the functional fillers were added into dental resins to investigate the ion release behavior of the composites. Dental composites containing 20 % fillers were selected to assess their ion recharge capacity, the remineralization potential of mSiO₂-EDTA-Ca loaded composites, and the antibacterial efficacy of those incorporating mSiO₂-EDTA-Zn. The effect of the fillers on the mechanical properties, light-curing performance, and biocompatibility of the dental composites was further evaluated. Results mSiO 2 -EDTA were successfully synthesized, and Ca 2+ and Zn 2+ were adsorbed on the particles by the ion solution immersing method. The ions within the mSiO 2 -EDTA-Ca and mSiO 2 -EDTA-Zn particles as well as their corresponding dental composites could be released at acidic conditions, and fully recharged after releasing. Even after 10 release-recharge cycles, the ions in the dental resins could still be fully recharged by simply immersing the samples in ion solution for just 10 min. The continually released Ca 2+ and Zn 2+ exhibited corresponding functions as promoting mineralization or antibacterial activity. Furthermore, surface modification of mSiO 2 with EDTA did not affect the mechanical properties, light curing performance, and biocompatibility of dental composites. Conclusion Novel dental composites with fully Ca 2+ and Zn 2+ recharge ability were obtained by surface functionalization of mSiO 2 fillers with EDTA, which provided a potential way for the inhibition of secondary caries.
研究领域:
牙科材料
·
生物医学工程
·
修复牙科
·
药物递送
·
生物材料
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Haoyu Yue,Zhijie Shang,Pan Xu,Dongyue Feng,Xinxue Li
A novel EDTA functionalized chitooligosaccharide/sodium alginate/Ca 2+ physical double network hydrogel (ECSDNH) was prepared by using of high-salinity oilfield produced water. The formation and structure of ECSDNH were characterized by FT-IR and SEM. Various factors, including EDTA functionalized chitooligosaccharide content, pH of solution, initial concentration of heavy metal ions, temperature and contact time, were thoroughly investigated to explore their effect on adsorption capacity of ECSDNH. The obtained results showed that ECSDNH had higher adsorption capacity for Zn 2+ , Ni 2+ and Mn 2+ . The maximum adsorption capacities of Zn 2+ , Ni 2+ and Mn 2+ were 160.19 mg/g, 72.67 mg/g and 52.43 mg/g at 298 K, respectively. The pseudo-second-order kinetic model and Langmuir isotherm model fit the experimental data fairly well. The thermodynamic parameters of the adsorption, Δ H ° , Δ S ° , and Δ G ° , were also calculated. In addition, the ECSDNH still had higher removal efficiency for three metal ions after three adsorption-regeneration cycles, indicating its potential application for removing heavy metal ions from wastewater.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
RUSSIAN JOURNAL OF APPLIED CHEMISTRY
·
2016
·Vol. 89
·期 7
·1145-1157
·
IF 0.307
Yu Ting,Yang Xu,Yuan Jianlan,Guo Li,Wu Xiaoling,Wang Hao
In drilling and production process, the barite powder serving as weighting agent is added to ensure operation safety when overflow occurs, that results in reservoir pollution and pore blockage. The main component of barite is BaSO 4 , so ammonium carboxy chelating agents can be injected into formation to form stable chelates with Ba 2+ , BaSO 4 will be eliminated from wellbore with flowback fluid easily. In this experiment, the weight method and the atomic absorption spectrometry method were utilized to study descaling ability and an action mechanism of descaling agents. Firstly, DTPA was selected from three descaling agents: NTA, EDTA, DTPA; then OT1 was screened out to synergize with DTPA and studied its descaling mechanism; eventually, the descaling system STD was determined, and its composition was 6% DTPA + 5% OT1 + 1% antiswelling agent + 100 ppm corrosion inhibitor. And the STD’s performance evaluation experiment results suggested that it had an excellent resistance to temperature and demonstrated a good descaling ability at 170°C. Furthermore, the descaling ability of STD was almost not affected by calcium and magnesium ions and its corrsion rate is lower than standard value. Moreover, STD could descale efficiently at lower dosage. So STD can be widely applied to descale in oilfield.
研究领域:
石油工程
·
化学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2020
·
IF 9.038
Shiwei Xie,Wei Shao,Hui Zhan,Zheng Wang,Chengcheng Ge,Qingjie Li,Wenjing Fu
The widely usage of ethylenediaminetetraacetic acid (EDTA) arises environmental concerns on toxic metal mobilization, and challenges the conventional processes in water treatment. In the study Cu(II)-EDTA in near natural water was efficiently removed during a two-step electrocoagulation using Fe(0) anode (Fe-EC), including a transformation to Fe(III)-EDTA induced mainly by structural Fe(II) in anoxic Fe-EC and further degradation in oxic Fe-EC. The degradation of Fe(III)-EDTA was mostly attributed to an oxygen activation mechanism that involving O 2 − and hydroxyl radical ( OH) generation, as validated by the quenching experiments and electron spin resonance. Furthermore, O 2 − generated during Fe(II) oxidation took a dominant role on Fe(III)/Fe(II)-EDTA transformation instead of electrochemical reduction. Six intermediates during the Fe(III)-EDTA degradation were identified by LC-Q-TOF, indicating a pathway of stepwise breakage of N C bonds. The results revealed in this work is helpful to understand the contribution and fate of EDTA during Fe-EC treatment of metal-EDTA polluted water.
研究领域:
环境科学
·
水处理
·
化学工程
✓ 已验证
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Song Ningbo,Yin Wanzhong,Xie Yu,Yao Jin
Using seawater for mineral flotation conserves fresh water resources and offers significant environmental and economic benefits. However, the adverse effect of seawater restricts its application in mineral flotation. The regulators can eliminate the adverse effect caused by seawater during flotation separation of lead and copper. In this paper, the flotation separation of galena and chalcopyrite in seawater was tested. Compared with those in deionized water, the lead grade of concentrate in seawater flotation declined from 50.10% to 48.90%. Meanwhile, the recovery of galena declined from 74.33% to 60.58% and the SI value declined from 1.565 to 1.324. With the addition of SHMP (sodium hexametaphosphate), SS (sodium silicate) and EDTA (ethylenediamine tetraacetic acid), the SI value increased from 1.324 to 1.923, 2.002 and 1.939, respectively. Noteworthy, when EDTA was excessive, the grade of Pb was 60.80%, the recovery of galena was 60.86% and the SI value was 2.113. X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, Atomic force microscopy, Density functional theory calculation and E-DLVO calculation verified the micro-flotation results and revealed the mechanism of action.
研究领域:
矿物加工工程
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
CHEMOSPHERE
·
2022
·
IF 8.943
Cheng Chen,Yu Zhao,Ting Lei,Dingming Yang,Yanfang Zhou,Jiawei Zeng,Ruzhen Xie,Wenyuan Hu,Faqin Dong
Photocatalytic removal of organic pollutants is a promising pollution treatment technology from the aspect of carbon neutrality . The complex diversity of actual wastewater components, as opposed to single-component systems, can significantly affect photocatalytic mechanisms. In this study, complex pollutant systems were created using various coordinating agents, and the effects of P25 on the photocatalytic removal of methyl orange (MO) in these systems and corresponding photocatalytic mechanism were investigated. The results show that photocatalytic removal of MO by P25 using ligands is significantly more efficient, especial removal of MO by the EDTA-P25 (P-E 2.5 ) coordination system resulted dramatically improved MO removal (97.4% versus 12.3% achieved by pure P25 after 15 min), with the reaction rate improved 23.8-fold. Theoretical calculations show that the effective coordination bonds formed by the coordinating agent and Ti atoms reduce the adsorption energy of P25 for MO. In addition, introduction of the coordinating agent EDTA reduces the transition state energy during the MO degradation process and greatly accelerates the reaction rate, and the conduction band position of the EDTA-P25 coordination system shifts to a more negative potential, which induces to the generation of •O 2 − for effective MO degradation.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2023
·
IF 13.6
Yuhang Zhang,Donglei Li,Liang She,Furong Guo,Falong Jia,Lizhi Zhang,Zhihui Ai,Xiao Liu
Heavy metal complexes in industrial wastewater are challenging to be removed by conventional methods arising from their stable chelating structure. In this study, zero-valent iron (ZVI) was ball-milled with tiny formic acid (FA), and the as-prepared sample (FA-ZVI bm ) was attempted to eliminate a model heavy metal complex of Cu(II)-ethylenediaminetetraacetic acid (Cu(II)-EDTA). The addition of FA to ball-milling could dramatically enhance the performance of ball-milled ZVI (ZVI bm ) towards Cu(II)-EDTA removal and increase the removal rate constant by 80 times. This conspicuous improvement of Cu(II)-EDTA elimination was attributed to the ferrous formate (Fe(HCOO) 2 ) shell formed on the surface of FA-ZVI bm . Results revealed that the Fe(HCOO) 2 shell facilitated the activation of O 2 to reactive oxygen species (ROS) and the leaching of Fe 3+ . Cu(II)-EDTA was decomplexed through both oxidative destruction and Fe 3+ replacement, and the released Cu 2+ was reduced by FA-ZVI bm and immobilized synchronously. Meanwhile, the ligands underwent oxidative degradation by ROS, thus avoiding the re-chelation ecological risk. Impressively, FA-ZVI bm could achieve cyclic treatment of actual copper complex wastewater and possessed promising advantage in treatment cost. This study would offer a promising approach for eliminating Cu(II)-EDTA through EDTA ligands degradation and synchronous Cu(II) removal, moreover to shed light on the decomplexation mechanism.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）