Inorganic Chemistry Frontiers
·
2025
·Vol. 12
·期 12
·4007-4018
·
IF 6.4
Hong-Juan Lv,Yunhui Zhai,Ying-Ying Xue,Jiao Lei,Wenyu Yuan,Quan-Guo Zhai
Adsorption-based separation techniques are pivotal in the purification of C2H2, leveraging their eco-friendly and energy-efficient attributes. However, the reusability of adsorbents is highly restricted by the trade-off between adsorption capacity and adsorption enthalpy, which is required to be urgently addressed. Herein, we demonstrated that the implantation of distortable ligands with functional groups is efficient in solving the above issue. The functional groups provided binding sites for C2H2 adsorption, while the distortable ligands optimized the pore structures to reduce adsorption enthalpy, thus balancing the trade-off between adsorption capacity and enthalpy. A series of ultra-microporous MOFs was successfully constructed by employing different pyridine ligands. The adsorption capacity of SNNU-504 after optimization was effectively enhanced, while the adsorption enthalpy hardly increased due to the adjustable ligand torsion angle. Breakthrough experiments and GCMC simulations further verified the potential C2H2/CO2 separation applications.
研究领域:
材料科学
·
化学工程
·
吸附技术
·
分离科学
·
纳米多孔材料
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2025
·
IF 3.2
Zhang Xu,Peng Xiaoqian,Liu Shaojun,Liu Xiaochan,Liu Guoran,Liu Rongshuang,Niu Jiale,Yuan Zhipeng,Zhang Jing,Yi Xibin,Filatov Serguei
A current challenge for natural gas adsorbed storage technology is to find specialized adsorbent materials that are able to store and deliver large amounts of methane (CH 4 ) near room temperature and at low pressures. In this study, bimetallic MOFs is supported on nitrogen-doped carbon foam derived from melamine (MC@NZn) by vacuum impregnation process as an adsorbent for CH 4 storage. The nitrogen-doped carbon foam with macroporous internetwork combined with high surface area and micro-/mesoporous structure of the NiZn-MOF leads a hierarchical porous structure, which provides efficient and rapid pathways for the penetration of CH 4 molecules and more active sites for CH 4 adsorption. Experimental results show that MC@NZ4 exhibits a CH 4 adsorption capacity of 105.80 cm 3 ·g -1 under 298 K and 60 bar with isosteric heat of adsorption of 10.71 kJ·mol -1 . Furthermore, MC@NZ4 achieves a CH 4 /N 2 adsorption selectivity of 5.63, indicating its potential for CH 4 adsorption. This work provides a simple method to combine MOF powders with three-dimensional skeleton substrate material to fabricate monolithic solid porous materials, which can find potential applications in gas adsorption.
研究领域:
材料科学
·
能源存储
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2022
·
IF 6.556
Wei Huang,Yao Chen,Lingyan Wu,Mei Long,Zhifeng Lin,Qianqian Su,Fuli Zheng,Siying Wu,Huangyuan Li,Guangxia Yu
L-tryptophan (Trp) is an essential amino acid for humans and plays crucial roles in many metabolic functions. Trp levels can be used for diagnosing different kinds of metabolic disorders and the symptoms associated with those diseases. Herein, a novel, simple and sensitive sensor based on 3D peony-like bimetallic conductive MOFs (Co–Ni-MOFs) was fabricated for the electrochemical determination of Trp. The bimetallic conductive MOFs were synthesized by a facile one-pot hydrothermal process. On account of the synergy between the Ni 2+ and Co 2+ ions, the bimetallic Co–Ni-MOFs showed excellent electrochemical performance, including good conductivity, large effective surface areas, and high electrocatalytic reactivity toward the oxidation of Trp. Consequently, the Co–Ni-MOFs-modified electrodes obtained a wide linear range from 10 nmol L −1 to 300 μmol L −1 and a low detection limit of 8.7 nmol L −1 (S/N = 3) for Trp. Additionally, the prepared sensor also displayed high selectivity, long-term stability and reproducibility. Moreover, the proposed sensor was successfully applied to determine the levels of Trp in the plasma of mice after cadmium intoxication.
研究领域:
生物化学
·
分析化学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Tiantian Li,Zhining Huang,Mengfan Hu,Yuen Hu,Ke Quan,Man Zhou,Yao chen,Shaoju Fu
Heavy metal wastewater pollution has been a globally important and serious issue for the industrial manufacturing center. Herein, we developed a novel CAP@Ui0-66-NH 2 @PPy nanocomposite fibrous membrane, by combining the in-situ growth and oxidative polymerization technical routes, which possessed a high specific surface area and abundant amino-active sites to remove Cr (Ⅵ). Systematic characterization showed that the porous structure and in situ growth of MOF provided sites for polymerization of charged polypyrrole (PPy), resulting in the large specific surface area (78.837 m 2 /g) of CAP2@Ui0-66-NH 2 @10 %PPy. The maximum adsorption capacity was as high as 312.70 mg/g at 298 K, which was significantly better than that of CAP (CA and PVP electrostatic spinning and then washing off the PVP) nanomembranes. The adsorption process was consistent with the proposed secondary kinetic and Langmuir model, and the high adsorption capacity was maintained after five rounds of cyclic adsorptions. Through XPS analysis, the abundant amino groups on the surface of the adsorbent material were protonated, caused the electrostatic attraction and ion-exchange interaction with the anion Cr(Ⅵ). These protonated amino groups were able to reduce the toxic Cr (Ⅵ) to non-toxic Cr (Ⅲ), which was immobilized on the surface of the material through chelation. The MOF lattice achieved in-situ growth on porous CA nanofibrous membranes, which significantly enhances the mass-transfer dynamics and the membrane cycling stability, the amine-based functionalization of the UI0-66-NH 2 improved the coordination activity and increased the adsorption efficiency, and polypyrrole (PPy) conductive layer promoted the directional migration of Cr (VI) and effectively suppressed the interference of competing ions. In sum, the prepared CAP@Ui0-66-NH 2 @PPy hybrid fibrous membranes showing great potentially applicable for heavy-metal wastewater treatment.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2024
·
IF 4.9
Xinrui Han,Geng Li,Weiyan Su,Xusheng Xu,Mengjiao Yu,Guangyu Wu,Weinan Xing
The degradation of recalcitrant antibiotics through the activation of peroxymonosulfate (PMS) is an important branch of advanced oxidation processes (AOPs), with widespread attention given to the application of metal-organic frameworks (MOFs) in this field. The article successfully synthesized Cu x O/N-doped carbon/Cu-MOF (Cu x O/NC/Cu-MOF) nanocomposites by low-temperature thermal treatment of Cu-MOF precursors. Compared with the original MOF, these partially decomposed composite materials exhibit significantly stronger catalytic activity towards PMS, efficiently removing organic pollutants such as tetracycline (TC). After optimization, the sample treated at 400 °C, under visible light with PMS assistance, achieves an impressive degradation rate, almost completely degrading a 50 mL TC solution (10 mg/L) after 80 min. This achievement surpasses the degradation rate observed with the original Cu-MOF by 2.1 times. In the composite system of Cu x O/NC/Cu-MOF+PMS+Vis, the significant enhancement of activity is credited to the effective spatial separation of photogenerated electrons and holes, as well as the utilization of 1 O 2 as the primary active oxygen species. This work provides a simple preparation strategy for the development of Cu-based PMS activators with excellent photocatalytic performance.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2022
·
IF 14.224
Zhen Huang,Chao Xiong,Lingri Ying,Welong Wang,Shixing Wang,Jing Ding,Jianfeng Lu
Lead ions in water have notorious effects on humans and environment. It is important to design an adsorbent with high adsorption capacity and reproducibility for efficiently removing Pb (II)ions from polluted water. Here, a novel Ti-based MOFs material (BDB-MIL-125(Ti)@Fe 3 O 4 ) was prepared by modifying NH 2 -MIL-125(Ti) with sulfhydryl and amino groups. Due to the large number of active sites, the maximum Pb (II) adsorption capacity of BDB-MIL-125(Ti)@Fe 3 O 4 was 710.79 mg/g at 25 °C and pH = 6 within 120 min corresponding to a maximum removal rate of 95.68%. The adsorbent also has extremely high selectivity and good cycling adsorption performance. The adsorption isotherms and kinetics agree with the Langmuir and the pseudo-second-order models, indicating that the process was chemisorption . Thermodynamic studies prove that spontaneous processes enhance Pb (II) adsorption at higher temperatures. DFT and FMOs calculations were used to discuss the adsorption mechanism. The sulfhydryl groups on the surface of organic ligands have a stronger affinity for Pb (II).
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2024
·
IF 5.5
Yue Feng,Lvgen Shen,Cheng Wang,Huirong Bao,Ningna Chen,Xiujing Lin,Ruiqing Liu,Xiaomiao Feng
Metal-organic frameworks (MOFs) have significantly emerged as pioneering electrode materials in recent years for their exceptional properties, particularly in the field of supercapacitor applications. In this work, bimetallic NiMn-MOFs have been prepared onto carbon cloth (NiMn-MOFs/CC) via electrodeposition method. The obtained NiMn-MOFs are uniformly dispersed on the CC substrate, that can be served as an electrode material for flexible all-solid-state supercapacitors directly. The NiMn-MOFs/CC electrode indicates the greatest electrochemical performances when the molar ratio of Ni/Mn was 2:1. In a standard three-electrode system, the examined sample was subjected to a discharge current density of 15 mA cm −2 , the area-specific capacitance of the NiMn-MOFs/CC electrode material was determined to be 2049.7 mF cm −2 , with an impressive capacity retention of 87.38 % observed after 2000 cycles. Remarkably, the symmetric supercapacitor device constructed using NiMn-MOFs/CC, demonstrated outstanding flexibility, and remarkable long-term cycling stability. Even after 12,000 cycles, the initial specific capacitance of the device retained 81.9 %. Furthermore, the micro-device exhibited the capability to power a light-emitting diode (LED), demonstrating the practical energy storage applications of this electrode.
研究领域:
材料科学
·
电化学
·
能源存储
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2022
·
IF 5.876
Hengheng Cao,Minmin Gou,Chufei Wang,Ruili Guo
A MIL-88B-on-UIO-66 (Abbreviation for UIO@MIL) hybrid-phase MOFs with rod-to-octahedral structure was obtained by the epitaxial growth method, and was added to Pebax matrix to develop a series of Pebax/UIO@MIL MMMs for CO 2 /CH 4 separation. In UIO@MIL hybrid-phase MOF, CO 2 solubility domain is formed in the core of UIO@MIL due to the abundant Zr–OH on the surface of UIO-66. MIL-88B has large pores and special rod-like structure that can entangled with the Pebax chain and adjust the spacing of the Pebax chain to form CO 2 diffusion domains in MMMs. The results show that Pebax/UIO@MIL-4 membrane has the best CO 2 separation performance, the CO 2 permeability is 379.07 ± 10.00Barrer, and the CO 2 /CH 4 selectivity is 38.1 ± 1.33. Therefore, hybrid-phase MOFs fillers provide a novel idea for the design of excellent MMMs.
研究领域:
材料科学
·
化学工程
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Ying Fang,Baoyu Qian,Ying Yang,Yang Song,Zhaoguang Yang,Haipu Li
Purification of high-arsenic (>10 µg/L) groundwater is of significance for drinking water safety all around the world. Considering the dominant presence of arsenite (As(III)) in groundwater and ineffective adsorption of As(III) by traditional adsorbents, the magnetic Zn/Co bimetallic MOFs (Zn/Co MOFs) which contain both catalytic and adsorption sites were prepared, and coupled with peroxymonosulfate (PMS) to realize the efficient simultaneous oxidation of As(III) and adsorption of evolved As(V). Considering the vital roles of oxidation and adsorption, the molar ratio of Zn and Co precursors was tuned ranging from 1: 1 to 9: 1 during Zn/Co MOFs synthesis to balance the catalysis and adsorption processes in the heterogeneous PMS system for As(III) immobilization. It was found that Zn/Co MOFs with Zn and Co molar ratio of 5: 1 possessing moderate catalytic performance and best adsorption capacity outperformed removal performance for As(III). The presence of PMS significantly promoted the elimination of both As(III) (the initial adsorption rate increased from 31.19 to 358.96 µg/g/min) and As(V) (the initial adsorption rate increased from 354.12 to 497.85 µg/g/min), which not only oxidized As(III) into As(V) by reactive species generated from PMS activation but also provided additional adsorption sites through enlarging pore size and changing chemical environment. Furthermore, Zn/Co MOFs coupled with the PMS system exhibited outstanding reusability and effectiveness for remediation of real high-arsenic groundwater.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
·
2021
·
IF 2.917
Lei HUANG,Zhi-hui YANG,LÜ-ji YAN,Sikpaam Issaka ALHASSAN,Hai-yin GANG,Ting WANG,Hai-ying WANG
2D carbon ribbon/Al 2 O 3 was synthesized with two-dimensional metal organic frameworks 2D-MOFs as precursors using the solvothermal and calcination methods. Batch experiments of adsorption parameters such as pH, liquid/solid ratio, adsorption kinetics, adsorption thermodynamics, and anions competitions were investigated to understand the adsorptive behavior of fluoride on carbon ribbon/Al 2 O 3 and nitrogen-doped carbon ribbon/Al 2 O 3 . The adsorption of fluoride on carbon ribbon/Al 2 O 3 could be described as the chemical and multilayer adsorption, while the adsorption of fluoride on nitrogen-doped carbon ribbon/Al 2 O 3 followed the chemical and monolayer adsorption phenomenon. The fluoride on nitrogen-doped carbon ribbon/Al 2 O 3 had a much faster adsorption rate of 3.1×10 −7 m/s than carbon ribbon/Al 2 O 3 , which was 1.2×10 −7 m/s. The nitrogen-doping on carbon ribbon enhances structural defects and improves the adsorption performance of fluoride. Also, the diacetylene linkages (—C≡C—) and pyridinic-N were studied to understand their influences on removing fluoride. The result indicates that carbon ribbon and nitrogen-doped ribbon could serve as good adsorbents for removing fluoride.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
ULTRASONICS SONOCHEMISTRY
·
2022
·
IF 9.336
Shanghai Dong,Liying Wang,Weiyi Lou,Yunxin Shi,Zhenzhu Cao,Yongfeng Zhang,Junmin Sun
For the first time, piezocatalysis activity has been observed in bismuth-based MOFs (ultrasound vibration treatment) with two different morphologies, namely FCAU-17 (flakes) and CAU-17 (rods). CAU-17 and FCAU-17 were synthesized by solvothermal and ultrasonic methods, respectively, with the same organic ligand (1,3,5-benzenetricarboxylic acid) and metal salt (Bi(NO 3 ) 3 ·5H 2 O). Among these, the apparent rate constant k of CAU-17 in piezo-photocatalysis is 3.9 × 10 −2 min −1 , which is ∼3.9 and ∼ 1.5 times of those in photocatalysis and piezocatalysis, respectively. CAU-17 showed much high piezo-photocatalytic activity during degradation of RhB. Efficiently coupling between piezocatalysis and photocatalysis has been realized in rod-like CAU-17 (ultrasound vibration treatment). Our results provide a new strategy to improve catalytic performance of Bi MOFs through an efficient synergistic piezo-photocatalysis approach for environmental remediation.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2023
·Vol. 30
·期 21
·61018-61031
·
IF 5.8
He Miaolu,Feng Leihao,Cui Qi,Li Yushuang,Wang Jiaqi,Zhu Jiani,Wang Lei,Wang Xudong,Miao Rui
Metal–organic frameworks (MOFs) can be applied to enhance the property of forward osmosis membranes. However, organic solvents can easily remain in organic synthetic metal–organic frame materials and cause membrane fouling and a decrease in membrane permeability. In this study, water-based Zr-fumarate MOFs were synthesized and doped into the membrane active layer by interfacial polymerization to provide a water-based MOF-doped thin-film composite membrane (TFC membrane). It was found that doping the water-based MOFs effectively improved membrane hydrophilicity, and nanowater passages were introduced in the active layer to improve permeability. The water flux of the water-based MOF-doped TFC membranes was increased by 21% over that of the original membrane, and the selectivity performance of the membrane was improved while keeping the salt rejection basically unchanged. Additionally, the water-based MOF-doped TFC membrane showed good removal efficiency ( R d > 94%) and strong antipollution performance in the treatment of dye pollutants.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）