CERAMICS INTERNATIONAL
·
2016
·Vol. 43
·期 1
·363-367
·
IF 2.758
Mingchen Sun,Mengfei Sun,Hongxun Yang,Wanghua Song,Yu Nie,Shengnan Sun
One-dimensional porous Fe 2 O 3 nanotubes with 2 µm length, 220 nm outer diameter and 65 nm wall thickness were firstly synthesized via a low temperature hydrothermal method followed by thermal treatment. As advanced anode for lithium ion batteries , porous Fe 2 O 3 nanotubes exhibit obviously enhanced electrochemical properties in terms of lithium storage capacity (1050.1 mA h g −1 at 100 mA g −1 rate), initial coulombic efficiency (78.4%), cycle performances (90.6% capacity retention at 50th cycle), and rate capability (613.7 mA h g −1 at 1000 mA g −1 rate). This enhancement could be attributed to the one-dimensional nanostructure of porous Fe 2 O 3 nanotubes which could increase contact area between electrolyte and active materials, shorten migration path for Li + ions and electrons, and accommodate the volume variations via additional void space during cycling.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
无机功能材料
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2021
·Vol. 48
·期 3
·3636-3646
·
IF 4.527
Shunxiang Wang,Songwen Fang,Kexiang Zhang,Yongjin Zou,Zuoan Xiao,Fen Xu,Lixian Sun,Cuili Xiang
A poor electrical conductivity and short cycle life limits the wide application of transition metal oxides in energy storage applications. In this study, yolk-shell structured CuCo 2 S 4 was grown on NiO nanosheets (NiO@CuCo 2 S 4 ) via a hydrothermal method and vulcanization , which combined the synergistic interactions between Ni, Co, and Cu. The effect of varying the amount of the vulcanizing agent (thiourea) on the electrochemical performance of NiO@CuCo 2 S 4 was also investigated. Moreover, the amount of thiourea not only tuned the morphology of the composite, but significantly influenced its electrochemical performance. When the Cu 2+ : Co 2+ : thiourea molar ratio in the precursor solution was 1:2:6, the obtained NiO@CuCo 2 S 4 exhibited the best electrochemical performance of the various systems examined, with a specific capacitance of 1658 F g −1 being achieved at 1 A g −1 . Density functional theory calculations further confirmed the excellent synergistic effect between NiO and CuCo 2 S 4 . In addition, the asymmetric supercapacitor composed of a NiO@CuCo 2 S 4 positive electrode reached an ultrahigh energy density of 73 Wh kg −1 at a power density of 802 W kg −1 , as well as excellent cycling stability (i.e., 91% capacitance retention after 5000 cycles). These results suggest that NiO@CuCo 2 S 4 is a promising candidate for use in energy storage applications.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
·
2016
·Vol. 213
·期 5
·1324-1328
·
IF 1.648
Yongzheng Zhang,Yuxiu Sun,Hao Wang,Hui Yan
Cu 2 ZnSnSe 4 (CZTSe) solar cell with a facile superstrate structure of carbon/CZTSe/CdS/ITO was fabricated entirely by non-vacuum processes. The influence of selenization temperature on the composition of CZTSe layer was briefly investigated. Compared with current superstrate-type CZTS(e) solar cells, the present CZTSe superstrate solar cell exhibited a higher power conversion efficiency of 2.44%.
研究领域:
材料科学
·
光伏技术
·
无机半导体
·
能源材料
·
薄膜器件
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2016
·
IF 3.15
Lingwei Lu,Meilin Lv,Gang Liu,Xiaoxiang Xu
Constituting solid solutions has been an appealing means to gain control over various physicochemical properties. In this work, we synthesized a series of SrTiO 3 -BiFeO 3 solid solutions and systematically explored their structural, optical and photocatalytic properties. Our results show that all solid solutions crystallize in a primitive cubic structure and their band gap values can be easily tuned by adjusting molar ratios between SrTiO 3 and BiFeO 3 . Photocatalytic hydrogen production under both full range and visible light irradiation is greatly improved after forming solid solutions. The highest hydrogen production rate obtained is ∼180 μmol/h under full range irradiation (λ ≥ 250 nm) and ∼4.2 μmol/h under visible light irradiation (λ ≥ 400 nm), corresponding to apparent quantum efficiency ∼2.28% and ∼0.10%, respectively. The activity is found to be strongly influenced by surface area and light absorption. Theoretical calculation suggests that Fe contributes to the formation of spin-polarized bands in the middle of original band gap and is responsible for the band gap reduction and visible light photocatalytic activity .
研究领域:
材料化学
·
光催化
·
能源材料
·
无机固体化学
·
半导体物理
·
太阳能转化
·
表面科学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2023
·Vol. 49
·期 14
·23410-23416
·
IF 5.2
Xuewei Luo,Shuo Huang,Ruiqi Huang,Chunhui Xu,Shuen Hou,Hongyun Jin
Single-phase high-entropy rare-earth zirconate (Dy 0.2 Nd 0.2 Sm 0.2 Eu 0.2 Yb 0.2 ) 2 Zr 2 O 7 with excellent high-temperature phase stability at 1600 °C was designed and synthesized. After being heated at 1600 °C for 1 ∼ 50 h, the average grain size of the sample increases only from 0.74 μm to 2.22 μm, indicating a high anti-sintering ability. The fracture toughness is 2.07 ± 0.03 MPa m 1/2 (25 °C), which is 50% higher than lanthanum zirconate. The local lattice distortions induced by the atomic interactions and atomic-size mismatch are considered to be responsible for the strong anti-sintering ability and improved fracture toughness. In addition, the thermal expansion coefficient and thermal conductivity of (Dy 0.2 Nd 0.2 Sm 0.2 Eu 0.2 Yb 0.2 ) 2 Zr 2 O 7 are 10.59 × 10 -6 K -1 (25 ∼ 1500 °C) and 1.14 ± 0.09 W·m -1 ·K -1 (1500 °C), respectively. The outstanding combination of anti-sintering ability, mechanical behavior , and thermophysical properties of (Dy 0.2 Nd 0.2 Sm 0.2 Eu 0.2 Yb 0.2 ) 2 Zr 2 O 7 highlights its great potential for next-generation thermal barrier coating applications.
研究领域:
材料科学
·
无机非金属材料
·
高温功能材料
·
热障涂层技术
·
固态化学
✓ 已验证
DOI
高影响因子
Green Energy & Environment
·
2020
·Vol. 7
·期 1
·53-65
·
IF 6.395
Hong-Li Ding,Hai-Tao Yu,Xiao-dong Wang,Chen-Feng Guo,Bing Zheng,Ying Xie,Ting-Feng Yi
SrLi 2 Ti 6 O 14 (SLTO) coated with different amount of ZrO 2 was successfully prepared. The as-obtained composites are stacked by a series of particles with a pure phase structure and a good crystallinity. Furthermore, ZrO 2 coating not only enhances the structural stability of the materials but also facilitates the diffusion of lithium through the SEI film. As a result, the redox polarization was reduced, and the reversibility of the electrochemical reaction was enhanced. Particularly, SLTO-ZrO 2 -2 sample delivers a high initial lithiation capacity of 283.6 mA h g −1 , and the values maintain at 251.7, 228.0, 207.4, 175.3, and 147.7 mA h g −1 at the current densities of 0.13, 0.26, 0.54, 1.31, and 2.62 A g −1 , respectively. Our experiment also confirmed that SLTO materials coated with ZrO 2 are suitable for high power density applications, and the lithiation specific energy efficiency of SLTO-ZrO 2 -2 is 200% as high as that of pure SLTO at a power density of 1257 W kg −1 .
研究领域:
材料科学
·
电化学
·
能源存储
·
无机非金属材料
·
固态离子学
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2018
·
IF 3.779
Wenyuan He,Xuejun Zheng,Jinfeng Peng,Qiang Zhang,Dazhao Pei,Xinyang Yan
A facile one-step solid-phase synthesis strategy is developed for synthesizing a binder-free molybdenum disulfide/carbon fibers paper (MoS 2 /CFP) anode. The microstructure, composition, morphology and electrochemical performances were investigated. It is found that the thin MoS 2 layers are well anchored on the interlaced carbon fibers to form MoS 2 /CFP, which has mesoporous structure and large specific surface area of ∼18.8 m 2 g -1 . As a result, the obtained MoS 2 /CFP anode exhibits a reversible capacity of 261 mAh·g −1 with 31.2% loading ratio of MoS 2 . After subtracting the capacity of CFP, the MoS 2 in the composite anode delivers a reversible capacity of 539 mAh·g −1 and shows better cycle stability than commercial MoS 2 after 100 cycles at 100 mA g −1 . The remarkable electrochemical performances could be attributed to the buffer space among carbon fibers for the volume changes of MoS 2 as well as the highly conductive carbon fibers network, suggesting that the MoS 2 /CFP is a promising binder-free anode for lithium-ion batteries.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
电池技术
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2015
·Vol. 41
·期 4
·5498-5504
·
IF 2.605
Shizhou Pu,He Zheng,Zhenlian Chen,Meiya Li,Zhongqiang Hu,Jianbo Wang,Huamin Zou
The microstructures of Bi 0.85 Nd 0.15 FeO 3 ceramics were investigated by using transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), convergent-beam electron diffraction (CBED) and X-ray energy dispersive spectrometry (EDS). The superstructure phase related to 1/4( hh 0) p and 1/4(00 l ) p diffraction spots were observed in the samples. It is found that the superstructure phase can co-exist with R 3 c phase in a single grain. The bright and dark field images accompanied with SAED patterns provided evidences of the superstructure phase dispersed into the matrix with R3c symmetry and evolution of the domain. The ferroelectric domain wall was observed according to the displacement of Fe 3+ ions respect to Bi 3+ sub-lattice in the ferroelectric R 3 c phase based on HRTEM observations. The space group Pnam of the superstructure was identified by combining SAED and CBED techniques . EDS measurement revealed that the concentration of Nd in the Pnam phase is higher than that in R 3 c phase. This might mean that the transition from R 3 c to Pnam structure is due to the inhomogeneous distribution of the Nd concentration and the weakened stereochemical activity of Bi 3+ lone electron pair, arisen from the increase in Nd content.
研究领域:
材料科学
·
凝聚态物理
·
功能陶瓷
·
电子显微学
·
铁电材料
·
多铁材料
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2013
·
IF 3.777
Lili Chai,Qunting Qu,Longfei Zhang,Ming Shen,Li Zhang,Honghe Zheng
Chitosan was applied as the electrode binder material for a spherical graphite anode in lithium-ion batteries. Compared to using poly (vinylidene fluoride) (PVDF) binder, the graphite anode using chitosan exhibited enhanced electrochemical performances in terms of the first Columbic efficiency, rate capability and cycling behavior. With similar specific capacity, the first Columbic efficiency of the chitosan-based anode is 95.4% compared to 89.3% of the PVDF-based anode. After 200 charge–discharge cycles at 0.5 C , the capacity retention of the chitosan-based electrode showed to be significantly higher than that of the PVDF-based electrode. Electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM) measurements were carried out to investigate the formation and evolution of the solid electrolyte interphase (SEI) formed on the graphite electrodes. The results show that a thin, homogenous and stable SEI layer is formed on the graphite electrode surface with chitosan binder compared with that using the conventional PVDF binder
研究领域:
电化学
·
材料科学
·
能源存储
·
电池技术
·
纳米材料
·
界面化学
✓ 已验证
DOI
高影响因子
Small
·
2024
·Vol. 20
·期 40
·2400578
·
IF 13
Yike Du,Aotian Li,Fan Zhang,Han Gao,Xuan Zhou,Jiliang Zhu,Zhicheng Ye
Passive radiative cooling (PRC) can spontaneously dissipate heat to outer space through atmospheric transparent windows, providing a promising path to meet sustainable development goals. However, achieving simultaneously high transparency, color-customizable, and thermal management of PRC anti ultraviolet (anti-UV) films remains a challenge. Herein, a simple strategy is proposed to utilize liquid crystalline polymer, with high mid-infrared emissive, forming customizable structural color film by molecular self-assembly and polymerization-induced pitch gradient, which guarantees the balance of transparency in visible spectrum and sunlight reflection, rendering anti-UV colored window for thermal management. By performing tests, temperature fall of 5.4 and 7.9 °C are demonstrated at noon with solar intensity of 717 W m −2 and night, respectively. Vivid red-, green-, blue-structured colors, and colorless films are designed and implemented to suppress the solar input and control the effective visible light transmissivity considering the efficiency function of human vision. In addition, temperature rise of 11.1 °C is achieved by applying an alternating current field on the PRC film. This study provides a new perspective on the thermal management and aesthetic functionalities of smart windows and wearables.
研究领域:
材料科学
·
高分子化学
·
光学工程
·
能源材料
·
纳米科技
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2017
·
IF 3.133
Haibo Wu,Yinsheng Li,Shan Yun,Xuejian Liu,Zhengren Huang,Dongliang Jiang
Porous gelcasted and solid-state-sintered SiC (S-SiC) ceramics with significantly improved connectivity were successfully prepared through the synergistic pore-forming mechanism of direct foaming and particle packing, using fine (D 50 = 0.5 μm) and coarse (D 50 = 5.0 μm) graded SiC powders as the main raw materials. As the proportion of coarse SiC powder increased, the viscosities of aqueous SiC-B 4 C-C slurries sharply decreased, which thus flourished foaming and enlarged bubble-derived-pore diameter in porous S-SiC ceramics, accompanied with the increased amount and size of window. Moreover, abundant particle-packing pores in struts of bubble-derived pores were also formed and even interconnected with each other at 60 wt% of coarse SiC powder. Besides, there was a remarkable increase in porosity from 61.0% to 81.7% and accordingly a significant decline in density from 1.24 g cm −3 to 0.58 g cm −3 as the content of coarse SiC powder increased. The optimized multiple pore microstructures resulted in an amazing nitrogen gas permeability of 1.78×10 −11 m 2 under the condition of an excellent compressive strength of 10.8 ± 2.7 MPa.
研究领域:
材料科学
·
无机非金属材料
·
多孔陶瓷
·
陶瓷加工
·
结构-功能一体化材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2018
·
IF 6.578
Miao Guo,Shuhao Wang,Kaifeng Gu,Xiaoxiao Song,Yong Zhou,Congjie Gao
Performance enhancement of the TFC membrane depends on the fine design of the functional layer. In this study, a gradient cross-linking strategy has been successfully applied to fabricate an ultra-thin gradient cross-linked PVA (GC-PVA) functional layer with the aid of surfactant on a polysulfone (PSF) support membrane. Such a strategy was accomplished by impregnating the crosslinker (Trimesic acid) on the porous support membrane prior to PVA coating. As confirmed by XPS and EDX studies, the GC-PVA membrane features a gradient cross-linked structure, where the bottom surface is densely cross-linked while the top is only slightly cross-linked. Overall, the lowest thickness achieved by the gradient-crosslinked ultrathin functional layer was 75.4 nm. This strategy significantly improved water flux compared with the conventional fully cross-linked PVA membranes while similar salt rejections can be maintained. In addition, the impact of key fabrication parameters, such as the concentration of PVA, surfactant, crosslinker, and the post-treatment temperature has been systematically studied. The optimized membrane had a significantly high water flux of 72.9 L m −2 h −1 at 0.2 MPa and showed rejection rates of 38.2% and 90.7% towards NaCl, Na 2 SO 4 aqueous solution (500 mg/L), respectively.
研究领域:
材料科学
·
膜分离技术
·
高分子化学
·
纳米功能材料
·
环境工程
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）