CERAMICS INTERNATIONAL
·
2024
·Vol. 50
·期 14
·25541-25547
·
IF 5.1
Hang Zhang,Ahsan Nawaz,Feiyu Huang,Zhiping Zhang,Hongfei Liu
Orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films have been synthesized using the sol-gel spin coating . Influences of post-annealing temperatures on crystal structure, morphology, negative thermal expansion (NTE) and optical performances of the thin films were studied using XRD , SEM, XPS, high-temperature XRD and UV–Vis–NIR spectrophotometer. XRD and SEM results show that as-prepared thin film is in an amorphous state with a smooth and dense surface. Orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films were obtained after post-annealing in 550–750 °C. The higher the annealing temperature in 550–750 °C, the better the crystallinity of orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films . In addition, the grain size of the In 0.5 Sc 1.5 Mo 3 O 12 thin film also grows as the annealing temperature increases. The resulting orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films exhibit anisotropic NTE. Its volumetric coefficient of thermal expansion (CTE) is −3.44 × 10 −6 °C −1 , while the CTEs in a -, b - and c -axis directions are −4.70 × 10 −6 °C −1 , 5.37 × 10 −6 °C −1 , and -4.10 × 10 −6 °C −1 in 25–700 °C, respectively. In addition, the transmittance of orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films post-annealed at 750 °C is around 87.75 %–95.03 %.
研究领域:
材料科学
·
无机非金属材料
·
功能薄膜
·
热膨胀调控
·
光学材料
✓ 已验证
DOI
高影响因子
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
·
2015
·Vol. 17
·期 29
·19457-19464
·
IF 4.493
Ganwei Zhang,Jiwen Hu,Yuanyuan Tu,Guping He,Fei Li,Hailiang Zou,Shudong Lin,Gonghua Yang
The diblock copolymer poly[2,2,2-trifluoroethyl methacrylate-r-styrene]-block-poly[(2-cinnamoyloxyethyl methacrylate)] [P(TFEMA-r-Sty)-b-PCEMA] was synthesized via atom transfer radical polymerization. The copolymer underwent self-assembly in TFEMA/CH2Cl2 to form spherical micelles. Photo-cross-linking of the PCEMA domains of these micelles yielded cross-linked nanoparticles. The cross-linked nanoparticles were subsequently cast from CH2Cl2/methanol solvent mixtures at methanol volume fractions of more than 30% to yield rough surfaces bearing small nanobumps on micron-sized aggregations that were connected together to form cross-linked nanoparticles. These surfaces were superhydrophobic with a water contact angle of 161 ± 1° and a sliding angle of 6 ± 1°. Spraying these nanoparticles onto substrates exhibiting microscale roughness, such as filter paper, by a traditional coating technique also created superhydrophobic surfaces. A thin layer of nanoscale spherical protrusions was observed on the microscale fibers of filter paper by scanning electron microscopy. The coated filter paper samples exhibited a water contact angle and a sliding angle of 153 ± 1° and 9 ± 1°, respectively.
研究领域:
高分子化学
·
材料科学
·
表面科学
·
纳米技术
·
功能材料
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Qing Zhang,Zhenping Ma,Xin Jing,Hao-Yang Mi,Yuejun Liu,Songwei Li
The polyamide (PA) reverse osmosis (RO) membranes prepared by interfacial polymerization at a free aqueous–organic interface always suffer from polymerization instability on the free-interface and low chlorine resistance. Focusing on these problems, in this study, a new approach was proposed which introduced an additional buffer layer to assist the free-interfacial polymerization (BLFIP). And due to the adjustment of the mitigation of the organic phase and water phase on the free-interface, defect-free PA membranes with significantly improved surface smoothness were successfully prepared by the proposed BLFIP process and the resultant membranes demonstrated superior desalination performance compared to the PA membranes prepared with the previous technique. With the optimized concentration of 0.3 wt.% trimesoyl chloride (TMC) and 0.6 wt.%, m-xylylenediamine, the prepared BLFIP PA membrane showed salt rejection rate of 92.55%, 92.01%, 83.99% and 95.16%, to Na 2 SO 4 , MgSO 4 , NaCl and methyl orange, respectively at 5 bar, while maintained a water flux of about 2 Lm –2 h –1 bar –1 . More importantly, the BLFIP PA membrane possesses excellent long-term stability, and chlorine resistance comparing with traditional PA membranes based on TMC and m-phenylenediamine, which demonstrated the new method in this study paved a facile way for preparing RO filtration membranes with outstanding performance in seawater desalination.
研究领域:
材料科学
·
膜分离技术
·
环境工程
·
水处理
·
高分子化学
·
界面化学
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2016
·Vol. 133
·期 17
·
IF 1.866
Ruiqing Hu,Yuping Pi,Na Wang,Qian Zhang,Jinqi Feng,Weilin Xu,Xia Dong,Dujin Wang,Hongjun Yang
Biodegradable polymers have received increased attention due to their potential application in the medicine and food industries; in particular, poly(lactic acid) (PLA) is a primary biopolymer because of its excellent biocompatibility and absorbability features. In this study, a porous PLA membrane was fabricated by phase separation using water microdroplets produced by an ultrasonic atomizer as a coagulation bath. The formation of S-type clusters was attributed to the slow exchange rate between solvent and coagulant, which provided time for the movement of polymer molecules. The effect of preparation conditions on the structure of S-type clusters, including polymer concentration in solution and ambient temperature was investigated. The PLA porous membrane prepared from water micro-droplets with different morphology compared with the sample fabricated from distilled water has potential application in fields of tissue engineering and artificial organ generation. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133 , 43355.
研究领域:
生物材料学
·
高分子科学
·
组织工程
·
再生医学
·
纳米结构制备
·
相变动力学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2023
·Vol. 49
·期 23
·39700-39706
·
IF 5.2
Xinkun Liu,Ying Dai,Xinmei Pei,Wen Chen
Ferroelectric thin films with giant room-temperature electrocaloric effect (ECE) could be very useful in design of solid-state refrigeration devices. Here, lead-free Ba 0.85 Ca 0.15-x Sr x Zr 0.1 Ti 0.9 O 3 (BCZT-xSr, 0.01 ≤ x ≤ 0.10) thin films are successfully prepared on the substrates (Pt/Ti/SiO 2 /Si) via sol-gel route, and the effect of the Sr substitution on the structure, electric properties and ECE of the films were investigated. The dielectric analyses show that the rhombohedral-tetragonal phase transition temperature (T R-T ) move to a higher temperature and the tetragonal-cubic phase transition temperature (T m ) shift to a lower temperature with increasing Sr content, and finally the T R-T peaks merge into the T m peaks at room temperature. The BCZT-0.05Sr film presents a giant ECE with ΔT = 27.1 K and ΔS = 30.6 J K −1 kg −1 at 800 kV cm -1 near room temperature (301 K). The giant ΔT benefits from a multiphase coexisting region with successive R-T and T-C phase transition character near room temperature. These results indicate that the lead-free Sr-doped BCZT thin film is an attractive material for application in ECE refrigeration devices.
研究领域:
材料科学
·
凝聚态物理
·
功能材料
·
热电转换
·
固态制冷
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2020
·
IF 2.779
Guonan Cui,Yanchun Yang,Ruilan Chen,Chengjun Zhu
Cations substitutions are known to make much significant contribution on achieving the high-quality kesterite Cu 2 ZnSn(S,Se) 4 thin films . And the optimal ratios of Mn, Ni and Co substitutions are reported to be ~0.05, belong to the low doping to reduce their defect density , which looks like to some extent the effect of Na doping. In this study, learning the research experience of alkali metal doping, we introduced the extra trace Mn 2+ ion into the precursor solution without affecting the compositions of other elements (i.e. Cu, Zn, and Sn), and the effect of trace addition on properties of the absorber layer was also studied. It was discovered that crystalline, electrical properties, and hole carrier concentration of Cu 2 ZnSn(S,Se) 4 thin films increased with an increase of Mn incorporation, and the best doping ratio of Mn/(Cu + Zn + Sn) was considered to be 0.03. In addition, the effect of extra trace Mn-doping on the film thickness and elemental compositions of Cu 2 ZnSn(S,Se) 4 absorber layer were studied in detail.
研究领域:
材料科学
·
半导体物理
·
薄膜制备
·
光伏材料
·
固体化学
✓ 已验证
DOI
高影响因子
Sustainable Energy & Fuels
·
2020
·Vol. 4
·期 8
·3943-3950
·
IF 5.503
Hongpeng Zhou,Menglei Feng,Peiyuan Li,Xiangnan Gong,Dingke Zhang,Shijian Chen
Layered Sb2Se3 consists of infinite chains of repeating Sb4Se6 units stacked along the c-axis via Sb–Se covalent bonds, whereas they are linked by van der Waals force along the a-axis and b-axis. It usually tends to grow along the [hk0] orientation with low surface energy. However, [001]-oriented growth, which efficiently enhances charge transport, is often considered unstable due to its high surface energy. Herein, we propose a growth method to fabricate Sb2Se3 thin films with the preferential [001]-orientation on various substrates (Mo, MoSe2, SLG, NiO, SiO2 and FTO). This crystal facet design of preferentially [001]-oriented Sb2Se3 exposes the majority of the nanoribbons vertically aligned to the substrate, and thus maximally improves the charge transport, which may find applications in diverse optoelectronic devices. We confirmed their performance in photoelectrochemical water reduction. The preferentially [001]-oriented Sb2Se3 photocathode exhibited an impressive photocurrent density of −20.5 mA cm−2 at 0 V vs. RHE and a maximum photocurrent density of −28 mA cm−2 at −0.2 V vs. RHE under 1 sun AM 1.5 G illumination. Thus, the successful use of this [001]-Sb2Se3 photocathode paves the way for the development of high-efficiency Sb2Se3-based devices for optoelectronic applications.
研究领域:
材料科学
·
半导体物理
·
光电化学
·
纳米材料
·
能源材料
✓ 已验证
DOI
高影响因子
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
·
2022
·
IF 6.76
Yuan Jin,Xiu Zhang,Tianci Feng,Meisheng Li,Huifang Xiao,Shouyong Zhou,Yijiang Zhao,Jing Zhong,Dawei Yang
Low ion conductivity and poor alkali resistance are still the two major obstacles for the applications of anion exchange membranes (AEMs). In this work, the combined strategies of Carbon quantum dots (CQDs) hybrid and cross-linking modification via side-chains designing were employed to prepare organic–inorganic hybrid AEMs. Then, the cross-linked quaternized polysulfone (CQPSf-CQDs) hybrid AEMs by incorporating carbon quantum dots were successfully fabricated. After hybrid and cross-linking, the mechanical properties of CQPSf-CQDs hybrid AEMs were higher than that of the pristine one, reaching 49.4 MPa for the best one. Meanwhile, the existence of CQDs can expand the hydrophilic area in the membrane, which is beneficial to the transport of O H - . The incorporated CQDs interact weakly with cationic groups in the side chains through hydrogen bonds. The simulation results further demonstrated that the introduction of CQDs was beneficial to the construction of hydrophilic and hydrophobic domains, thereby increasing O H - conductivity. In addition, the prepared hybrid membranes own excellent dimensional stabilities and ion transport performances. These preliminary results give us a lot of hopes for further experiments and optimizations for the hybrid AEMs.
研究领域:
材料科学
·
高分子化学
·
膜科学与技术
·
电化学
·
能源材料
✓ 已验证
DOI
高影响因子
Journal of Macromolecular Science Part B-Physics
·
2024
·
IF 1.2
Tiansheng Gao,Wenzhong Ma,Xiangyuan Song,Jing Zhong,Haicun Yang,Hideto Matsuyama
The application of carbon nanotubes (CNTs) in water treatment membranes can increase the permeability and selectivity of the membranes. However, traditional CNTs are usually affected by van der Waals forces, which makes them prone to agglomerate in polymer membranes, and their non-directional arrangement in the membranes limits their transport efficiency as water channels in the membranes. In this paper, a reversible addition-fragmentation chain transfer (RAFT) polymerization method was used to synthesize propargyl methacrylate - random copolymerization - poly (ethylene glycol) methacrylate - block - polymethyl methacrylate [P(PgMA-r-PEGMA) -b-PMMA]. The P(PgMA-r-PEGMA)-b-PMMA grafting rate was 60.4% on the surface of magnetic sulfhydryl functionalized carbon nanotubes (mCNTs-SH) by click-reaction grafting. Poly (vinylidene fluoride) (PVDF)/CNTs composite ultrafiltration membranes were prepared using vapor-induced phase separation (VIPS) combined with magnetic field arraying. When the mCNTs-g-P(PgMA-r-PEGMA)-b-PMMA were vertically aligned in the PVDF membrane through a magnetic field, the effective construction of the vertical nanochannels was realized, and an increased purified water flux from 25.6 LMH to 35.8 LMH, with the composite ultrafiltration membranes was obtained. In addition, the membranes also showed excellent hydrophilicity, mechanical properties, and polyethylene glycol 1200 (PEG1200) rejection. The water contact angle was reduced from 105° to 79°, the rejection of PEG1200 was increased from 44% to 91% of the 0.5 g/L PEG aqueous solutions, and excellent mechanical properties (tensile strengthes up to 9.3 MPa) were achieved. By designing the interface structure of the CNTs and studying the orientation of the CNTs in PVDF membranes, this work provides a new research idea for the field of water treatment ultrafiltration membranes.
研究领域:
材料科学
·
化学工程
·
高分子科学
·
纳米技术
·
环境工程
✓ 已验证
DOI
高影响因子
International Journal of Ophthalmology
·
2019
·
IF 1.189
Eirini-Kanella Panagiotopoulou,Panagiota Ntonti,Maria Gkika,Aristeidis Konstantinidis,Irfan Perente,Doukas Dardabounis,Konstantinos Ioannakis,Georgios Labiris
A systematic review of the recent literature regarding the current image-guided systems used for cataract surgery or refractive lens exchange was performed based on the PubMed and Google Scholar databases in March 2018. Literature review returned 21 eligible studies. These studies compared image-guided systems with other keratometric devices regarding their accuracy, repeatability and reproducibility in measurement of keratometric values, astigmatism magnitude and axis, as well as in IOL power calculation. Additionally, the image-guided systems were compared with conventional manual ink-marking techniques for the alignment of toric IOLs. In conclusion, image-guided systems seem to be an accurate and reliable technology with measurements of high repeatability and reproducibility regarding the keratometry and IOL power calculation, but not yet interchangeable with the current established and validated keratometric devices. However, they are superior over the conventional manual ink-marking techniques for toric IOL alignment.
研究领域:
眼科
·
生物医学工程
·
影像学
·
手术导航技术
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF POROUS MATERIALS
·
2017
·Vol. 25
·期 1
·215-220
·
IF 1.624
Chen Wu,Guo Qingyue,Yang Chunpeng,Hou Jin
Merlinoite(MER) zeolite membranes were synthesized on the outer surface of porous α-alumina tubular support by in-situ hydrothermal synthesis method without organic template. The synthetic MER zeolite membranes (sample 1, sample 2 and sample 3) were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX). The thickness of sample 2 without cracks is about 15 μm. The synthetic MER membrane which is mainly composed of Si, Al, O and K is typical merlinoite structure. The performance of sample 2 for potassium extraction in simulated seawater was researched by the membrane tube reactor. The continual ion-exchange reaction was carried out for 108 h at room temperature. The average exchange rate for K + ion was 32.8% and the average rejection rates for Na + , Ca 2+ and Mg 2+ ions were 93.4, 98.4 and 98.2% respectively. So the MER zeolite membrane (sample 2) has preference selectivity for K + ion and can be used as a potential inorganic membrane for potassium extraction from seawater.
研究领域:
材料科学
·
膜分离技术
·
资源回收利用
·
无机非金属材料
·
环境工程
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2019
·Vol. 37
·期 7
·664-673
·
IF 2.804
Liu Ya-Di,Zhang Qiang,Yu Xin-Hong,Liu Jian-Gang,Han Yan-Chun
For poly(9,9-dioctylfuorene) (PFO), β phase (coplanar conformation with the intra-chain torsion angle of 165°) has a greater conjugation length and higher degree of order compared to those of α phase, which favors charge carrier transport. However, the highest content of β phase obtained so far is 45%. We propose to increase the content of β phase by promoting the solution aggregation of PFO molecules and extending film-forming time. For this purpose, 1,8-diiodooctane (DIO) is added to PFO o -xylene solution, which enhances the interaction of PFO chains and improves the planarity of PFO backbone, resulting in the formation of ordered aggregation. The aggregates act as nucleation centers to promote the formation of β phase. The content of β phase increases with increasing DIO concentration and reaches a platform of 39% as DIO is more than 4 vol%. Furthermore, the film is kept in a sealed environment with o -xylene atmosphere for 3 h, thus the PFO molecules have enough time to diffuse to the crystallization front and achieve disorder-order transition. As a result, the crystallinity of PFO is improved significantly and the content of β phase increases to 52%, reaching the highest value reported so far.
研究领域:
高分子化学
·
材料科学
·
凝聚态物理
·
纳米技术
·
光电材料
·
有机电子学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）