CHEMICAL ENGINEERING SCIENCE
·
2022
·
IF 4.889
Lu Long,Kaiji Xu,Kok Bing Tan,Dongren Cai,Yucheng Yang,Shu-Feng Zhou,Guowu Zhan
Catalytically agitating paddles are essential to perform liquid-solid heterogeneous catalytic reactions on an industrial scale due to the improved mass transfer and easy catalyst recovery. Herein, bimetallic oxides were formed after the calcination of nanomaterials derived from metal-organic frameworks (MOFs). Particularly, Mn(M)-BTC nanomaterials were synthesized by self-assembly of Mn 2+ ions (mixed with various dopants such as Cu 2+ , Ce 3+ , or Fe 2+ ) and H 3 BTC ligands in a mixed solvent of ethanol and water. It was found that in the powdery form, the Mn-Cu oxide derivate exhibited the highest degradation rate in the catalytic wet peroxide oxidation process (CWPO process), which was significantly higher than that of single metal oxide as well as Mn-Fe and Mn-Ce oxide derivates. The reason was caused by the synergistic effect between Mn-Cu promoted the formation of Mn 3+ and Cu + species to boost the CWPO reaction. Furthermore, the obtained Mn-Cu powdery catalysts were 3D-printed to obtain monolithic agitating paddles with different geometries, which were then mounted on a central shaft in the stirred reactor. An advanced oxidation process was used to investigate the effect of 3D patterns on the degradation efficiency of various organic dyes. It was discovered that the 3D-printed grid with higher cell density (484 cpsi) had better liquid mixing efficiency and thus better catalytic performance, which could be repeatedly used more than seven times. Additionally, the numerical simulation analysis (computational fluid dynamics) revealed a good mixing efficiency and improved mass transfer in the entire reactor equipped with the designed monolithic agitating impellers.
研究领域:
化学工程
·
材料科学
·
环境工程
·
催化
✓ 已验证
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2024
·
IF 7.4
Ying Huang,Juan Lei,Baobao Bai,Xiaoli Ren,Lijun Cheng,Yu Cao,Shuang Wang,Jinping Li
Traditional powder catalysts are not suitable for industrial applications due to low utilization of active phase and easy sintering. Therefore, monolithic catalyst MCCF with good stability and water-resistance was designed for the catalytic oxidation of toluene-acetone mixture, in which amorphous MnO x derived via pyrolysis of Mn-MOFs loaded on copper foam (CF) and different transition layers were employed between MnO x and CF to regulate Cu-Mn interaction. The combined action of amorphous MnO x and the Cu-Mn strong interaction enhanced the catalytic degradation of toluene-acetone mixture. The existence of amorphous MnO x and the impacts of Cu-Mn interaction on weakening Mn-O bonds and stimulating reactive oxygen species were verified by various characterizations. Furthermore, the reaction pathways of toluene and acetone on catalyst MCCF were revealed as well as their interactions within the mixture.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Catalysts
·
2023
·Vol. 13
·期 11
·1398
·
IF 3.9
Wei Qian,Yi Fang,Hui Liu,Yili Deng,Yingying Li,Yongzheng Zhang,Zenghui Diao,Mingyu Li
The environmental pollution caused by antibiotics is becoming more serious. In this study, the Mn/BiPO4/g-C3N4composite (Mn-BPC) and the Ti/g-C3N4/BiPO4composite (Ti-BPC) were prepared by hydrothermal reaction method and solvent method, respectively, and applied to the degradation of tetracycline (TC) in an aqueous environment. The XRD and HRTEM results showed that these materials had the crystalline rod-like structure of BiPO4and abundant carbon, nitrogen and carbon–oxygen surface functional groups. The degradation of TC by Ti-BPC and Mn-BPC were nearly 92% and 79%, respectively. The degradation processes of TC were well consistent with the pseudo-second-order kinetics model and R2values were closer to 1. The trapping experiment showed that electron holes (h+) were the main reactive species for the degradation of tetracycline, OH· and O2−also have certain effects. Also, the possible photocatalytic degradation mechanism of Ti-BPC and Mn-BPC composites was thereby proposed. TC was firstly adsorbed on the surface of catalysts, and subsequently degraded by reactive species such as h+, OH· and O2−generated under visible light excitation. This study shows that the Ti-BPC and Mn-BPC photocatalysts have great potential in antibiotic degradation and can provide new ideas for antibiotic removal in aqueous environments.Keywords:bismuth phosphate;graphite phase carbon nitride;tetracycline (TC)
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY
·
2025
·
IF 1.6
Liu Xinying,Lei Yuhan,Shi Jialin,Wang Zixuan,Zhang Wenxiu,Zhang Guanghui,Gu Ping
A novel adsorbent, Mn-MOF-74, was synthesized using a room-temperature, water-based method by assembling Mn 2+ metal nodes with 2,5-dihydroxyterephthalic acid ligands, and was further applied for Co 2+ removal. Mn-MOF-74 exhibited minimal pH dependence within a pH range of 3–8.5, achieving Co 2+ removal efficiencies between 92.5 and 96.3%, with a distribution coefficient of up to 2.9 × 10 4 mL·g −1 . A function relationship between the Co 2+ removal efficiency and the adsorbent dosage or initial concentration was proposed. The dominant removal mechanism was identified as ion exchange between Mn 2+ and Co 2+ , with chemisorption being the primary rate-limiting step.
研究领域:
环境科学
·
材料科学
·
化学工程
·
无机化学
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2017
·Vol. 9
·期 39
·15044-15055
·
IF 7.367
Dong Li,Guanjie Xing,Shilin Tang,Xiaohong Li,Louzhen Fan,Yunchao Li
We report herein a heat-triggered precursor slow releasing route for the one-pot synthesis of ultrathin ZnSe nanowires (NWs), which relies on the gradual dissolving of Se powder into oleylamine containing a soluble Zn precursor under heating. This route allows the reaction system to maintain a high monomer concentration throughout the entire reaction process, thus enabling the generation of ZnSe NWs with diameter down to 2.1 nm and length approaching 400 nm. The size-dependent optical properties and band-edge energy levels of the ZnSe NWs were then explored in depth by UV-visible spectroscopy and cyclic voltammetry, respectively. Considering their unique absorption properties, these NWs were specially utilized for fabricating photoelectrochemical-type photodetectors (PDs). Impressively, the PDs based on the ZnSe NWs with diameters of 2.1 and 4.5 nm exhibited excellent responses to UVA and near-visible light, respectively: both possessed ultrahigh on/off ratios (5150 for UVA and 4213 for near-visible light) and ultrawide linear response ranges (from 2.0 to 9000 μW cm−2 for UVA and 5.0 to 8000 μW cm−2 for near-visible light). Furthermore, these ZnSe NWs were selectively doped with various amounts of Mn2+ to tune their emission properties. As a result, ZnSe NW film-based photochromic cards were creatively developed for visually detecting UVA and near-visible radiation.
研究领域:
材料科学
·
光电材料
·
纳米技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2024
·
IF 7.4
Haishuo Wang,Jie Zhang,Zhichun Li,Bin Shi,Shiyin Li,Heyong Huang
Microcystin-LR (MCLR) is a highly toxic pollutant widely distributed in eutrophic waters. The interplay between dissolved organic matter (DOM) and metal ions has been extensively reported; however, the impact of DOM-metal complexes on MCLR remains to be thoroughly studied. In this research, equilibrium dialysis was employed to study the kinetics and isotherms of MCLR adsorption by DOM, meanwhile the Density functional theory (DFT) calculations provided insights into the theoretical mechanisms of Fe(II)/Mn(II) involvement in the adsorption process. The adsorption kinetics revealed that the process is physicochemical, with chemisorption being the critical factor controlling the adsorption rate. The adsorption isotherms confirmed that Fe(II) alters the spatial arrangement of adsorption sites on the superficies of DOM, with the complexes of Fe(II) and DOM from the macrophyte-dominated regions of Lake Taihu (MDR-Fe(II)) showing the uppermost adsorption capacity of 6193.965 µg/g among all combinations. The influence of different cations (K + , Ca 2+ , Na + , Mg 2+ ) on the adsorption of MCLR to DOM is divergent, with metals either reducing MCLR adsorption through competition for adsorption sites or increasing it by forming ternary complexes. The pH decrease reduced the affinity of DOM to metal ions while simultaneously enhancing MCLR adsorption through changes in its ionization state. DFT calculations demonstrated that Fe(II)/Mn(II) reduces the resistance to interaction between functional groups on DOM and MCLR, with carboxyl-Fe(II)-carboxyl interactions showing the highest binding energy (ΔG = −7.253 eV). Overall, Fe(II)/Mn(II) enhances the adsorption of MCLR via altering the structure and surface electrostatic potential distribution of DOM. This research indicates that the ultimate fate of MCLR in aquatic ecosystems is affected by DOM and metal ions.
研究领域:
环境科学
·
毒理学
·
理论化学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL PHYSICS LETTERS
·
2022
·
IF 2.719
Huan Zhang,Chang Liu,Yu Wang,Feifei Jia,Shaoxian Song
In this work, Mn (II) was doped into MoS 2 structure and then anchored on activated alumina beads to construct 3D-sized composites (Mn-MoS 2 @AABs). This component material was used as PMS activator for tetracycline (TC) degradation under light irradiation. According to experiment results, Mn-MoS 2 @AABs exhibited well degradation performance to TC, which ascribed to excellent photo-response property of Mn-MoS 2 and activation of Mn. Importantly, the 3D-sized structure made it facilely be recycled from solution, which catered to the demand for the practical application. Therefore, the novel strategy of designing Mn-MoS 2 @AABs had great significance for environmental restoration.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Fawen Liang,Zhang Liu,Xueding Jiang,Jiesen Li,Kaibang Xiao,Weicheng Xu,Xin Chen,Jinzhi Liang,Zhifeng Lin,Meng Li,Xiaolian Wu,Hailong Wang
In this study, NaOH-modified biochar supported Fe/Mn bimetallic composite (Fe-Mn/AW-BC) was prepared to remove tetracycline (TC) through activating peroxymonosulfate (PMS). Results showed that about 97.9 % of TC was degraded and the rate constant of Fe-Mn/AW-BC + PMS system was 37 folds higher than BC + PMS system. Experimental results confirmed that both radical and non-radical pathway were contribute to the catalytic system. Density functional theory (DFT) results also suggested that Fe-Mn/AW-BC sample was favorable for adsorbing PMS based on the length O O bond from PMS and the E ads of catalysts. The superior activation ability was ascribed to the accelerating formation of reaction active species and other oxidation species by bimetallic structures of Fe-Mn and oxygenated functional groups of BC. Additionally, the redox cycles of Fe 3+ /Fe 2+ and Mn 3+ /Mn 2+ under Fe-Mn-BC synergism promoted the generation of the radicals, whereas the carbon shell effectively inhibited metals leaching of Fe-Mn/AW-BC, and 77.8 % of TC can be still removed within 60 min after five consecutive cycles. Notably, Fe-Mn/AW-BC system has special characteristic of wide pH usable range and broad-spectrum adaptability towards various organic pollutants and various water environments. Based on intermediate identification and Fukui function calculation, the degradation pathways of TC were also proposed. This study highlights the applications of biochar for the environmental catalysis.
研究领域:
环境科学
·
催化材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2013
·Vol. 25
·期 2
·754-759
·
IF 1.486
Liu Lu,Huang Miaoliang,Lan Zhang,Wu Jihuai,Shang Guanglu,Liu Guijing,Lin Jianming
Mn-doped CdS quantum dot sensitized solar cells based on SnO 2 microsphere photoelectrodes are prepared with successive ionic layer adsorption and reaction method. It is found that with Mn-doped CdS quantum dot sensitizers, the photovoltaic performance of the cells based on SnO 2 microsphere photoelectrodes can obviously be enhanced. The reasons are owing to the improved light absorption and the expanded light absorption edge by doping Mn in CdS quantum dots. The electrochemical impedance spectroscopy analysis found that the cells with Mn-doped CdS quantum dot sensitized SnO 2 microsphere photoelectrodes can efficiently suppress dark reaction, owing to the increased related resistance. Moreover, it is also found that the Mn-doped CdS quantum dot sensitized SnO 2 microsphere photoelectrode can increase the electron diffusion lifetime in the cell. The power conversion efficiency of the cell with 4 wt% Mn-doped CdS quantum dot sensitizers can attain to 2.80 %, with 53 % enhancement compared with that of the CdS quantum dot sensitized cell (1.83 %).
研究领域:
材料科学
·
光伏技术
·
纳米技术
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2018
·Vol. 6
·期 28
·13668-13675
·
IF 9.931
Hongtao Guan,Pan Cai,Xiaomeng Zhang,Yanlin Zhang,Gang Chen,Chengjun Dong
We demonstrate the design and fabrication of novel Cu2O@Mn(OH)2 core–shell hierarchical structures using octahedral Cu2O as a template. The Cu2O backbone supports the growth of an ultrathin Mn(OH)2 nanoflake shell, leading to a relatively large surface area (65.8 m2 g−1) for sufficient utilization of active materials. Cyclic voltammetry (CV) and galvanostatic charge–discharge measurements (GCD), as well as cycling stability and electrochemical impedance spectroscopy (EIS) were performed to examine the electrochemical performances of the Cu2O@Mn(OH)2 core–shell structure. Applied as a supercapacitor electrode, the Cu2O@Mn(OH)2 composite delivers a high specific capacitance of 540.9 F g−1 at 1 A g−1 and an energy density of 6.4–18.2 Wh kg−1. After conducting 3000 cycles at 5.0 A g−1, the capacitance retention of 71.5% was achieved. The unique core–shell structure of the Cu2O@Mn(OH)2 composite favours the effective transport of electrolytes and shortens the ion diffusion path. In addition, the synergetic effects from both Cu2O and Mn(OH)2 significantly enhance the electrochemical performances. Our findings suggest that this Cu2O@Mn(OH)2 core–shell is very promising for next generation high-performance supercapacitors.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2024
·
IF 5.1
Shuangjie Xu,Chongqi Wang,Lianxu Ye,Ruixing Xu,Yu Wang,Kaifeng Li,Feng Chen,Yanda Ji,Jiyu Fan,Fengjiao Qian,Chao Yun,Lei Qiu,Weiwei Li,Hao Yang
Real-time monitoring of structural health status is very important for supersonic aircraft, since the long-term operation in harsh service environments, such as high temperatures, can cause potential damage. Structural health monitoring (SHM) based on lamb wave has been approved to be a critical technique for the reliable operation of supersonic aircraft , but is limited by the operating temperature of conventional piezoelectric sensors , which makes it difficult to meet the high-temperature monitoring requirements. The BiFeO 3 –BaTiO 3 ceramics exhibit excellent piezoelectric properties and high Curie temperature ( T c ), making them promising for high-temperature SHM of supersonic aircraft. Here, we fabricated a piezoelectric sensor using 0.67BiFeO 3 -0.33BaTiO 3 -0.25%molMnO 2 (BF33BTMN-025) ceramic, which exhibits a piezoelectric charge constant ( d 33 ) of 135 pC/N at room temperature and a T c of 448 °C. The BF33BTMN-025 ceramic sensor operates effectively at temperatures up to 200 °C and maintains stable damage monitoring sensitivity as well. Compared with Pb(Zr, Ti)O 3 (PZT), BaTiO 3 (BTO) and other piezoelectric sensors commonly used in SHM field, the BF33BTMN-025 ceramic sensor has a higher operating temperature and a comparable sensitivity. Our work demonstrates that the BF33BTMN-025 ceramic sensor can be employed as piezoelectric sensor for high-temperature SHM, which has a wide application potential in the field of real-time monitoring of supersonic aircraft.
研究领域:
材料科学
·
航空航天工程
·
结构健康监测
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Energy Materials
·
2025
·
IF 5.5
Hongjie Chen,Yixuan Su,Yucong Chen,Minghan Bao,Mingjun Wu,Junyang Chen,Weitao Chen,Qiang Ru
The inherent low electronic conductivity of NASICON-type Na4MnV(PO4)3 (NMVP) impedes its use in advanced energy storage. Herein, we address this challenge by introducing a citric acid-derived carbon coating to elevate the material’s conductivity and electrochemical performance. By precisely tailoring the configuration of the carbon layer, we fabricated Na4MnV(PO4)3 encapsulated by a carbon coating (NMVP@C) and constructed a 3D hierarchical architecture with incorporated V(III) and Mn(II) states, which prompts the reversible redox reaction, augments Na+ storage capability, and mitigates volume expansion during cycling. The optimal cathode manifests superior rate capability and a long life span with 107.5 mA h g–1 at 1 C and 82.5% capacity retention over 5000 cycles at 20 C. The hard carbon//NMVP@C full cell confirms practical applicability with good electrochemical performance. This work underscores the pivotal interplay among the carbon layer, Na+ mobility, and structural integrity in NASICON cathodes, offering a pathway to develop high-performance and cost-effective cathode materials for sodium-ion batteries.
研究领域:
材料科学
·
能源存储
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）