Petroleum Science
·
2024
·
IF 6
Ran Liu,Chang Wang,Qiang Yang,Jing-Ran Yang,Chen Liu,Liberty Mguni,Xin-Ying Liu,Ya-Li Yao,Fa-Tang Li
The development of highly active functionalized ionic liquids (ILs) as both extractants and catalysts for use in achieving deep desulfurization continues to pose challenges. In this study, a highly efficient oxidative desulfurization system was constructed, composed of dual-acidic ionic liquids (DILs) and H 2 O 2 -AcOH. The investigation results of four DILs prepared from different metal chlorides ([HSO 3 C 3 NEt 3 ]Cl-MnCl n , MnCl n = AlCl 3 , ZnCl 2 , CuCl 2 , FeCl 3 ) in oxidative desulfurization showed that [HSO 3 C 3 NEt 3 ]Cl-AlCl 3 had an outstanding catalytic effect and significantly promoted the oxidation of sulfides. With a 0.2 g [HSO 3 C 3 NEt 3 ]Cl-AlCl 3 , the removal rate of dibenzothiophene (DBT) reached 100% in 10 mL model oil under mild conditions at 55 °C for 20 min. The key is its ability to induce the dismutation of superoxide anions (•O 2 − ), which facilitates the generation of singlet oxygen ( 1 O 2 ). The efficient oxidation of DBT is accomplished through a predominantly 1 O 2 -mediated non-radical mechanism. [HSO 3 C 3 NEt 3 ]Cl-AlCl 3 serves as a favorable medium for contact to be made between 1 O 2 and sulfides, which indicates an efficient catalytic-adsorption synergy.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2025
·
IF 11.3
Qian Guo,Zuxin Xu,Wenhai Chu,Yingying Zhou,Xiaoting Gao,Cheng Ye
Sewer overflows are a potential source of emerging contaminants to urban waters, posing a threat to ecosystems and human health. Herein, the performance and mechanism of ferrate(Ⅵ) (Fe(Ⅵ))/peroxymonosulfate (PMS), Fe(Ⅵ)/peroxydisulfate (PDS), and Fe(Ⅵ)/percarbonate (SPC) for the degradation of ofloxacin (OFL) in overflows were comparatively investigated. These systems achieved efficient degradation of OFL and the removal of conventional pollutants. Particularly, Fe(Ⅵ)/PMS showed better degradation performance for OFL with a degradation efficiency of 98.8 %. The dominant reactive oxygen species for OFL degradation in the Fe(Ⅵ)/PMS, Fe(Ⅵ)/PDS, Fe(Ⅵ)/SPC systems were singlet oxygen ( 1 O 2 ), sulfate radical (SO 4 · - ), and hydroxyl radical (·OH), respectively. High-valent iron species played an important role in the Fe(Ⅵ)/PMS and Fe(Ⅵ)/PDS systems. Notably, the synergistic effect of oxidation and in-situ coagulation played a key role in OFL degradation, which determined the superior performance of Fe(Ⅵ)/PMS. The formed flocs with Fe-O-P bond acted as a highway to promote the electron transfer from OFL to PMS, resulting in the efficient degradation of OFL in Fe(Ⅵ)/PMS system. Moreover, a same degradation pathway of OFL was found, and the toxicity of the degradation products was reduced, especially in the Fe(Ⅵ)/PMS system. This study provided a new strategy for overflows treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD CHEMISTRY
·
2024
·
IF 8.5
Xinran Wang,Xufeng Zang,Hong Zhou,Na Wang,Yishan Fang,Bo Cui
Trichlorfon (TCF) has the possibility of contaminating agricultural crops and posing some health risks to humans. Herein, an electrochemiluminescence (ECL) sensor based on Fe, Cu dual-atom catalysts (Fe/Cu-N-C DACs) and Au@Luminol was developed for the ultrasensitive detection of TCF. Fe/Cu-N-C with diatomic sites has a very high catalytic activity and can be used as a co-reaction accelerator to activate H 2 O 2 to generate a large number of hydroxyl radicals which triggered a strong cathodic ECL signal of luminol. TCF molecularly imprinted polymer (MIP) was further introduced as a specific recognition element, and the interaction between the template molecule and the functional monomer was verified by molecular docking technique. The developed sensing platform was successfully applied to the ultrasensitive detection of TCF with a linear range from 1.0 pg/mL to 5.0 μg/mL with a low detection limit (0.39 pg/mL). This study broadens the application of DACs in ECL sensing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Environmental Science-Water Research & Technology
·
2024
·
IF 3.5
Haoxiang Yan,Jianzheng Zhen,Yuyuan Yao
Developing a facile preparation method to construct separable and recyclable Fenton-like catalysts holds great significance in the field of environmental remediation. Herein, a rapid dopamine (DA) polymerization strategy to modify melamine foam (MF) was proposed for the construction of bulk foam catalytic materials, which was further utilized for peroxymonosulfate (PMS) activation to degrade organic pollutants. Taking advantage of the chelation between dopamine's catechol group and Fe3+, as well as the oxidative environment provided by H2O2, DA could encapsulate and polymerize on the surface of MF within 2 h to obtain the MF@Fe@PDA catalyst. Detailed experimental results demonstrated that MF@Fe@PDA could efficiently activate PMS to achieve almost 100% removal of bisphenol A (BPA) in 20 min, and the corresponding turnover frequency (TOF) value was one order of magnitude higher than that of the homogeneous (Fe2+, Fe3+) and nanoparticle (Fe0) catalysts. The high activity of the MF@Fe@PDA/PMS system stemmed from the Fe sites and carbonyl group (CO), which could induce the activation of PMS for the rapid generation of singlet oxygen (1O2), sulfate radical (SO4˙−) and hydroxyl radicals (˙OH). Meanwhile, the coexisting bicarbonate ions (HCO3−) in the MF@Fe@PDA/PMS system could enhance the generation of 1O2, thereby accelerating the degradation of BPA. Moreover, a flow-through system assisted by the bulk MF@Fe@PDA catalyst was constructed for organic pollutant degradation. Overall, these findings may open up new possibilities for developing highly efficient catalysts for wastewater remediation.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Yuning Wang,Wenrui Yao,Zehuai Li,Haiyan Tan,Ce Sun,Dingyuan Zheng,Yanhua Zhang
The extensive use of organic dyes has led to significant water pollution. Using lignocellulosic waste as a precursor for catalysts preparation for sewage remediation presents an effective alternative with numerous advantages in sustainability, cost-effectiveness, and environmental compatibility. In this work, wood fiber waste collected from wood processing plants was decorated with Prussian blue (PB) and then annealed to produce carbonized wood fiber catalyst (Fe 3 C@Fe-CB). In the presence of peroxymonosulfate (PMS), the prepared catalyst could achieve over 98.69 % efficiency in degrading methylene blue (MB) solutions (20 mg/L) in 60 min across a pH range of 3 to 11. Electrochemical test and electron paramagnetic resonance (EPR) analysis respectively verified that electron transfer pathway and radical pathway were the key factors for the degradation of MB. Cyclic degradation tests demonstrated that the degradation efficiency remained above 93.67 % after five recycling experiments. Moreover, the used magnetic catalyst can be easily recycled by magnet. This study proposed a facile and sustainable carbonized wood fiber catalyst decorated by Fe 3 C@Fe-CB, which could realize efficient elimination of organic dyes. Moreover, we offered a novel choice for dyes-polluted water treatment and paving a new route for converting low-value lignocellulosic waste to high-value utilizations.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2024
·
IF 8.2
Lian Xia,Feng Luo,Xiaojuan Niu,Yue Tang,Yuangen Wu
Pb(II) is a prevalent heavy metal ion classified as a 2B carcinogen. Excessive intake of Pb(II) in the human body can damage the central nervous system, kidneys, liver, and immune system, leading to permanent brain damage, anemia, and cancer. Colorimetry can be applied to rapidly determine Pb(II) residues, but there are still many challenges in the accuracy and sensitivity of detection. Based on the inhibitory impact of Pb(II) on the oxidase-like activity of octahedral silver oxide (Ag 2 O), a colorimetric sensor with smartphone-assisted analysis for the Pb(II) detection was first developed. Herein, it has been found that Pb(II) can adsorb onto the surface of octahedral Ag 2 O, hindering the production of O 2 − in the reaction system. This ultimately results in the suppression of oxidase-like activity, leading to a lighter purple appearance of the colorimetric reaction solution. The sensor exhibits a high degree of sensitivity and a limit of detection (LOD) for Pb(II) was calculated as 2.2 μg L −1 . Hence, the developed colorimetric sensor with high sensitivity, excellent specificity, and high tolerance to sodium ions is hopeful to have practical applications in Pb(II) detection in environmental water samples. Moreover, the sensor will provide a novel strategy for heavy metal ion detection and other substances.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICAL CHEMISTRY
·
2024
·
IF 6.7
Mei Li,Ling Zhang,Wei Liu,Yan Jin,Baoxin Li
Oxygen vacancy (Ov) is known to act as an active center of the metal oxide. Quantification of surface Ov is vital for understanding the quantitative structure–activity relationship. Facile quantification characterization of surface Ov is highly desirable but still challenging. In this study, we presented a simple colorimetric method for rapidly quantifying surface Ov. As an example of metal oxide nanoparticles, Co3O4 was used to catalyze the 3,3′,5,5′-tetramethylbenzidine (TMB)-H2O2 colorimetric reaction. It was found that the absorbance of the TMB-H2O2 system was dependent on the surface Ov amount in Co3O4. The investigation of the mechanism showed that the Ov-dependent absorbance would be attributed to the activity of surface Ov to easily adsorb and dissociate H2O2 into a hydroxyl radical (•OH). The absorbance signal of the TMB-H2O2 system acted as a probe to estimate the surface Ov. This colorimetric measurement could be completed in less than 20 min. The Ov concentrations obtained by the proposed colorimetric method matched well with those obtained by X-ray photoelectron spectroscopy. This method does not require any complex operation and expensive equipment and can be performed in any ordinary chemical laboratory. So, this colorimetric method is expected to become an alternative approach for quantifying the surface Ov in metal oxide nanoparticles. This method will provide essential insights into the rational design and application of Ov.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Today Communications
·
2024
·
IF 3.7
Rui Luo,Yuting Huang,Min Wang,Tong Yu,Kexin Tai,Lin Hu,Xiankun Wu
Advanced oxidation processes based on persulfate (PS-AOPs) have emerged as effective strategies for environmental remediation, with cobalt-based oxides serving as prominent catalysts for peroxymonosulfate (PMS) activation. In this study, we developed a highly active Co 3 O 4 /Al 2 O 3 catalyst (Co/AA) featuring ultrafine nanoparticles, synthesized via a facile approach using tannic acid (TA) as a coordinating agent and activated alumina as a robust support. Co/AA-0.1, as the representative catalyst, was characterized and exhibited outstanding performance in degrading rhodamine B (RB) via PMS activation. Our findings highlight TA's critical role in reducing Co 3 O 4 nanoparticle size, thereby increasing the availability of active sites. The degradation mechanism was elucidated through reactive oxygen species (ROS) quenching experiments and electron paramagnetic resonance (EPR) analysis, revealing that sulfate radicals (SO 4 •− ) are the dominant ROS. The high activity of Co/AA-0.1 is confirmed by analyzing X-ray photoelectron spectroscopy, Brunauer-Emmett-Teller surface area and O 2 -temperature programmed desorption data of the samples. We also investigate the effects of various factors, such as anions, reaction temperatures, and PMS dosage, on RB degradation. Higher temperatures for treating the catalyst are found to reduce activity but improve stability. Notably, the catalyst synthesized through EDTA-assisted synthesis showed balanced activity and stability. Furthermore, the versatility of our synthesis method was demonstrated by successfully applying it to other supports, such as SiO 2 and TiO 2 , offering the development of more efficient and stable catalysts for environmental applications.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2024
·
IF 5.3
Junjie Zhang,Yansheng Wu,Li Zhang,Wenran Gao
Nitrogen-doped graphene has been regarded as one of the most promising materials for nonradical peroxymonosulfate (PMS) activation. However, facile construction of nitrogen-doped graphene and systematic investigation of its nonradical PMS activation in a practical environment still far lag behind. Herein, graphitic N-rich graphene was prepared by one-step pyrolysis of urea. The obtained urea-derived graphitic N-rich graphene (UGNG) possessed a high N content of 12.12 at. % and a graphitic N proportion of 41.12%, giving a high graphitic N content of 4.98 at. %. We confirmed that PMS donated electrons to the graphitic N in UGNG, resulting in the cleavage of PMS to singlet oxygen for nonradical oxidation. The turnover frequency for the oxidation reached the highest value of 10.5 min–1. Also, the reaction could be conducted in a wide temperature (5–45 °C) range, even with the existence of common matrix species and different natural water matrixes. This work presented the direct conversion of N-rich organic urea to UGNG and systematically investigated its nonradical PMS activation, which is believed to be helpful to its further practical use.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2024
·
IF 7.4
Zhaoyi Han,Hao Shi,Wentao Qiu,Dongdong Zhu,Wei Li,Dihua Wang
The excessive use of antibiotics like sulfamethoxazole (SMX) is causing environmental pollution and endangering human health and the ecosystem. Using transition metals as catalysts to activate persulfate (PS) can effectively degrade the organic pollutants in the advanced oxidation process (AOP). However, the high dissolution of the transition metals leads to poor stability, low efficiency in pollutant degradation, and secondary pollution. In this work, a graphitized carbon encapsulated Co (Co@EC) anode is developed for electrochemically activating peroxymonosulfate (PMS) to degrade SMX. It is found that the synergistic effect of Co@EC, PMS, and current significantly enhances SMX degradation. Under optimal conditions (current density of 5 mA cm −2 , pH of 9, and PMS concentration of 0.25 mM), the Co@EC anode can completely remove 10 μM of SMX in 9 min, a much higher efficiency compared to processes without PMS, Co, or current. The rapid reaction kinetics (6.69×10 −1 min −1 ) at optimal conditions are associated with the two main active species of 1 O 2 and O 2 • − during electroactivation. Furthermore, the Co@EC anode maintains high degradation efficiency and low dissolution after repeated cycling tests due to its structural stability. These findings provide new insights and strategies for developing stable catalysts.
✓ 已验证
产品关联
DOI
高影响因子
GREEN CHEMISTRY
·
2024
·
IF 9.3
Anting Ding,Chuanying Liu,Chengliang Xiao
Palladium and platinum are precious metals (PMs) used in industrial catalysis, and their green recycling is crucial but challenging. In this study, we aimed to create a novel leaching procedure for the environmentally friendly recovery of PMs using AlCl3·6H2O solution. We report here the use of a microwave-assisted AlCl3·6H2O solution to selectively recover Pd and Pt from spent catalysts. In a large-scale setting, our system can recover gram-scale Pd in a single batch. Electron paramagnetic resonance (EPR) and capture experiments revealed the hydroxyl radicals produced by proton dissociation and microwave coordination triggered the oxidative dissolution process. Microwave-assisted AlCl3·6H2O solution leaching and NaBH4 reduction recovered high-purity Pd and Pt separately. In scale-up experiments, the dissolution performance of the microwave-assisted AlCl3·6H2O solution for Pd remained almost unchanged after seven cycles. Our approach uses around 1/50 and 1/20 of the energy and chemical inputs of the conventional hydrometallurgy process, respectively. Strong acids, poisonous cyanide, and volatile organic solvents were not used during the recovery process, enabling an efficient and sustainable PM recovery process and promoting an advanced oxidation process (AOPs) technology for secondary resource recycling.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Ang Li,Bin Li,Li-Ming Sun,Le-Xuan Liu,Chang Liu,Ya-Meng Dong,Xing Zhang
Advanced oxidation processes involving high-valent metal-oxo species have garnered increasing attention for their effective pollutant degradation in water. However, less is known about the mechanism of the species in the manganese oxides (MnO x ) system. Therefore, it is crucial to design MnO x catalysts to systematically clarify the high-valent metal-oxo species reaction mechanism. In this study, MnO x nanoplates including Mn 3 O 4 , Mn 5 O 8 , and Mn 2 O 3 were synthesized via a facile thermal treatment of a Mn(OH) 2 precursor to activate peroxymonosulfate (PMS) for mechanism studies. The Mn 3 O 4 catalyst exhibited superior catalytic performance and reusability owing to its unique spinel structure and rapid electron transfer properties. The first-order rate constant for Mn 3 O 4 is 0.64 min −1 , which is 3.7 and 1.5 times higher than those of Mn 5 O 8 and Mn 2 O 3 , respectively. Scavenging experiments, electron paramagnetic resonance, and electrochemical analysis revealed that free radicals played a negligible role, while the formation of high-valent Mn-oxo species was promoted, facilitated by the Mn 3 O 4 -PMS* complex. These high-valent Mn-oxo species were highly reactive towards various pollutants. Moreover, the degradation intermediates of bisphenol A (BPA) in the Mn 3 O 4 /PMS system were identified, further elucidating the interactions between high-valent Mn-oxo species and BPA. Additionally, the Mn 3 O 4 catalyst exhibited excellent catalytic performance under practical conditions and maintained superior stability over six cycles. This work provides crucial insights into the role of transition metal oxides in activating PMS for the catalytic degradation of emerging pollutants.
✓ 已验证
产品关联
DOI
高影响因子