CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Yajie Feng,Chi Lin,Yifei Huang,Bing Li,Yingxin He,Jiangping Ma,Chaogang Ban,Lujie Ruan,Hongxing Jia,Xiaoping Tao,Liyong Gan,Xiaoyuan Zhou
The metal–metal interactions between different metal atoms within dual-metal-supported catalyst have garnered significant attention in effectively regulating the chemical and electronic structure of active sites, thus providing enormous opportunities to optimize the catalytic performance. Herein, by loading Cu clusters and Pd nanoparticles on TiO 2 (CuPd/TiO 2 ), it is found that Cu clusters enable the metalize transformation of Pd as a result of the metal–metal interactions between Cu and Pd, which remarkably improves the surface catalytic reaction as well as the separation and transfer of photogenerated carriers. The resultant photocatalyst exhibits an excellent activity for H 2 evolution coupled with benzyl alcohol oxidation, achieving yield rates of 43.7 μmol h −1 for H 2 and 22.0 μmol h −1 for benzaldehyde, and an apparent quantum efficiency (AQE) of 20.4 % at 313 nm for hydrogen evolution. This integration of metal–metal interactions within the dual-metal-supported catalyst open a new avenue for the design of advanced photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Cong Pan,Yihui Zhang,Wenyu Wang,Feng Wu,Zhixiong You,Jing Xu,Jinjun Li
Chlorobenzene (CB) is a typical example of chlorinated volatile organic compounds (CVOCs) that require pollution control. Using wet scrubbers coupled with advanced oxidation processes (AOPs) has become a promising technique to degrade gaseous CVOCs. Here, a CoS-loaded porous graphitized carbon (PGC) served as an adsorbent for CVOCs and a catalyst to activate peroxymonosulfate (PMS) to construct a wet scrubber for CB degradation. CoS/PGC exhibited excellent catalytic performance at pH 9.0; a 0.1 g/L CoS/PGC dosage and a 10 mM initial PMS concentration achieved 90% CB (25 ppmv) removal within 500 min. Electron spin resonance and quenching experiments identified hydroxyl radicals and sulfate radicals as the main reactive oxygen species that removed CB. In addition, we proposed possible CB degradation pathways by intermediates identified using liquid chromatography-mass spectrometry and density functional theory calculations. Electrochemical experimental results such as cyclic voltammetry and Nyquist proved that CoS/PGC has superior electron transport capacity compared to CoS. A possible catalytic mechanism for CB removal in CoS/PGC + PMS system was proposed by ESR and XPS spectra. By using continuous dosing or pulsed dosing to replenish PMS to maintain its suitable concentration, the system achieves a commendable long-term efficiency. Moreover, this catalyst displayed excellent recyclability and universal applicability to treat various gaseous CVOCs as well as the scrubbing solution replacement with tap water for efficient CB removal. This study may provide new fundamental insights into the PGC-supported catalysts for wet oxidation of CVOCs or other contaminants.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Dawei Lan,Huiwen Zhu,Jianwen Zhang,Chengrui Xie,Fan Wang,Yueying Zheng,Zeyu Guo,Mengxia Xu,Tao Wu
In this research, a novel composite of typical Zr-based metal–organic frameworks (UiO-66) with porous graphitic carbon nitride (g-C 3 N 4 ) was prepared by an in-situ preparation method. The g-C 3 N 4 /UiO-66 nanohybrids (CNU-0.5chieved almost 100 % efficiency in the degradation of RhB (60 mg/L, 100 mL) within 70 min under visible light, which was 6.46 and 10.56 times faster than that of pure g-C 3 N 4 and UiO-66, respectively. The improved photocatalytic properties were attributed to the large surface area, enhanced optical adsorption ability and the creation of heterojunction between g-C 3 N 4 and UiO-66. The formation of the heterojunction structure enhanced the photoelectron transfer efficiency and reduced the recombination of electron/hole pairs. Furthermore, the trapping experiments showed that •O 2 – , h + and •OH were the active species in the photodegradation process, with •O 2 – playing a dominant role. This study offers valuable insights into the preparation of MOF-based photocatalysts with exceptional effectiveness for the removal of contaminants in wastewater treatment.
✓ 已验证
产品关联
DOI
高影响因子
ACS ES&T Engineering
·
2024
·
IF 7.4
Caihong Liu,Xihui Jiang,Zhiqiang Sun,Rui Gao,Min Wang,Qiang He,Jun Ma
Catalytic membranes that enable simultaneous micropollutant degradation during oil/water separation have emerged as a promising candidate for treating complex emulsified oily wastewater. However, this hybrid system suffers from membrane fouling and subsequent radical quenching. Herein, we overcome these challenges by developing a novel hierarchical filtration-catalysis ceramic membrane to achieve efficient gradient decontamination. This membrane comprises a top hydrophilic MWCNT layer deposited on a CuFe2O4-immobilized ceramic membrane to construct CCuFeCM. A pristine ceramic membrane (CM) and a CuFe2O4-immobilized membrane (CuFeCM) served as controls. Our results demonstrated that CCuFeCM presents the most alleviated fouling potential (∼18% of flux decline) and TOC removal (91%) when treating synthetic textile wastewater containing a mineral oil-in-water emulsion with RhB. Besides that, CCuFeCM achieves the highest PMS-based RhB degradation capability (100%) and initial reaction rate (0.684 min–1). Quenching experiments and EPR analyses show that SO4–•, •OH, and 1O2 are responsible for the CCuFeCM/PMS oxidation system, and 1O2 is the dominant reactive species. The synergistic effect of oil separation and catalytic decomposition is mainly ascribed to the ordered arrangement of selective separation in advance to avoid interference with subsequent AOPs, which allows for micropollutants that are transmitted into internal membrane channels for confined catalytic oxidation. Furthermore, replication filtration tests indicate that CCuFeCM shows durable stable degradation and antifouling performance after simple cleaning. The specific functionality of oil isolation, catalyst anchor, and mass transfer effect reaction compartmentation provides a novel strategy for efficient gradient removal of multiple pollutants in water, which highlights promising application potential under realistic conditions.
✓ 已验证
产品关联
DOI
高影响因子
ACS ES&T Water
·
2024
·
IF 4.8
Yu Wei,Meng Chen,Sheng Guo,Yao Li,Zhenyu Zhang,Yin Xie,Chao Cai,Qingsong Wei
Hierarchically porous photocatalysts exhibit superior light-harvesting capacity and enhanced photocatalytic activity. In this work, a facile method by combining additive manufacturing (AM) and dealloying was employed to prepare a hierarchically porous photocatalyst, namely, nanoporous-TiO2-encapsulating macroporous-double-gyroid-structure photocatalyst (TiO2@DGS). It was found that TiO2@DGS possessed deterministic macropores and interconnected nanopores, which offered efficient mass transfer channels and abundant active sites, respectively. Thus, TiO2@DGS showed excellent photocatalytic capability under ultraviolet–visible (UV–vis) light irradiation and achieved a tetracycline degradation efficiency of over 90% within 60 min (photocatalytic rate constant k = 4.0 × 10–2 min–1). Furthermore, TiO2@DGS exhibited excellent durability and reusability due to its stable three-dimensional structures. This work not only exemplifies the high performance of the prepared TiO2@DGS for environmental remediation but also provides an innovative approach to introduce tailored macrostructures into hierarchically porous photocatalysts through the incorporation of AM and dealloying.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2025
·
IF 26.8
Siyi Li,Jiaoting E,Xiucheng Zhao,Rui Xie,Jiaming Wu,Lili Feng,He Ding,Fei He,Piaoping Yang
Reactive oxygen species (ROS) play crucial roles in cellular metabolic processes by acting as primary intracellular chemical substrates and secondary messengers for cellular signal modulation. However, the artificial engineering of nanozymes to generate ROS is restricted by their low catalytic efficiency, high toxicity, and off-target consumption. Herein, hetero-trimetallic atom catalysts (TACs) anchored on a stable symmetrical pyramid structure are designed in the presence of N and P surface ligands from cross-linked polyphosphazene interlayer-coated MIL-101(Fe). The 3D network TACs with a uniform dispersion of Cu, Co, and Fe hetero-single atoms effectively tailor the active sites to avoid metal sintering, thereby providing sufficient catalytic activity for ROS blooms. Nanovesicle membranes facilitate the stable accumulation of nanozymes with homologous targeting, recognition, and endocytosis, effectively addressing the potentially high toxicity and off-target defects. Therefore, the outcome of the in situ ROS-bloom acts as a redox signal for directly regulating oxidative stress in the tumor microenvironment. Meanwhile, ROS intervene in the glutathione peroxidase 4, long-chain acyl-CoA synthetase 4, and cysteinyl aspartate specific proteinase-3 pathways as second messengers, fostering the proclivity toward apoptosis and lipid peroxidation-regulated ferroptosis pathway concurrently, thereby highlighting the application prospects of TACs in the biomedical field.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL TECHNOLOGY
·
2025
·
IF 2
Xu Gao,Yuanwei Zhang,Mengxi Ren,Junjie Wang,Yunhong Song,Junchao Ma
The widespread existence of sulfapyridine (SPD, a typical representative of sulfonamide) in natural environment has raised increasing interest because its potential to cause antibiotic-resistant genes. In this work, the degradation of SPD during heat-activated peroxodisulfate (heat/PDS) oxidation process was explored. The pseudo-first-order rate constant (kobs) of SPD was 0.0149 min−1 with 0.5 mM PDS at pH 7. The kobs values were increased obviously with increasing PDS concentration. Such degradation was ascribed to the oxidation of sulfate radical (SO4•−) primarily according to radical quenching test. A total of 16 transformation products derived from hydroxylation, aniline moiety oxidation, and SO2 extrusion & rearrangement pathways were identified by high-resolution mass spectrometry (HRMS) and theoretical calculations. Of which, the production of nitrated byproducts was attributed to the oxidation of aniline moiety in SPD molecule. The existence of natural organic matter (NOM) obviously reduced the degradation efficiency of SPD, while the effects of coexisting anions (i.e., NO3−, CO32−, and Cl−) were negligible. These findings illustrated that SPD can be effectively degraded but cause the nitrated byproducts generation during the heat/PDS oxidation process, which should be paid attention to when SR-AOPs is applied.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
VACUUM
·
2024
·
IF 3.8
Zhihao Zhang,Jing Wang,Huidi Zhang,Yao Deng,Binbin Tan,Jiang Wang,Cuihong Zhang,Hongbo Xiao,Wenlei Wang
The increasing contamination of water systems by ciprofloxacin (CIP) has become a growing concern. The photocatalysis approach offers a promising strategy for the effective removal of CIP. In this study, MS x /CNC (MS x , M = Co, Ni, Cu) binary composites with chiral catalytic interfaces were prepared by chemical precipitation and the composite M 0 -MS y /CNC was prepared by energetic β-particle bombardment. The XPS results confirmed the successful construction of C–O−M bonds. TEM results clearly revealed the generation of sulfur vacancies (Sv) in the composites. The M 0 -MS y /CNC/peroxymonosulfate (PMS) photocatalytic system was also constructed in this study. The results of the application experiments showed that the Co 0 -CoS y /CNC/PMS system had an excellent degradation effect on CIP, which reached 100 % at 1.5 h of open light. The degradation kinetic constants of Co 0 -CoS y /CNC/PMS were 4.26 times higher than those of CoS x /CNC/PMS. In addition, EPR showed that the Co 0 -CoS y /CNC/PMS system generates ‧OH, ‧SO 4 − , ‧O 2 − , and h + radicals to co-remove CIP. This study also elucidated the major intermediates of photocatalytic degradation of CIP at the chiral catalytic interface using LC-MS analysis. This work provides insights into the coupled application of photocatalysis and PMS activation in the remediation of aqueous environments.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Communications
·
2024
·
IF 3.7
Yudong Xu,Saisai Chen,Mengru Xu,Yaran Wen,Zhenyu Yan,Yuanyuan Yan,Tianyu Zhang,Tong Zhu,Zhixu Qin,Fabao Zhang
A lead-free double perovskite material is being considered as a substitute for lead-based perovskites due to its promising benefits in the photocatalytic degradation of organic dyes. In this study, Cs 2 AgBiCl 6 , a A 2 BB’X 6 -structured halide double perovskite, was prepared by one-step grinding method and hydrochloric acid precipitation method, respectively, and was used to degrade organic dyes in an ethanol solution under visible light. It is shown that the nano-sized Cs 2 AgBiCl 6 sample prepared by the one-step grinding method (Cs 2 AgBiCl 6 -G) can degrade 98 % of Sudan Red III within 10 min, which is highly comparable with the sample prepared using the hydrochloric acid precipitation method (Cs 2 AgBiCl 6 -P). Cyclic experiments demonstrated that Cs 2 AgBiCl 6 -G exhibited superior cyclic catalytic performance compared to the Cs 2 AgBiCl 6 -P samples. In addition, the former also exhibited better photocatalytic degradation for methyl orange, rhodamine B, and methylene blue. This indicates that this facile one-step grinding method can be utilized a large-scale effective preparation technique for producing high yield, eco-friendly, highly efficient and stable Cs 2 AgBiCl 6 photocatalyst.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Zhiwei Zhao,Yu Li,Fei Wang,Zhitao Xu,Sai Zhang,Li Li,Junyu Fan,Jie Liu
Monitoring and regulating the formation of toxic byproducts in advanced oxidation processes (AOPs) is of great significance for their practical application in water treatment. In this work, we found that dichloroacetonitrile (DCAN), a common N-containing byproduct in chloramination disinfection, can be formed with the co-presence of g-C 3 N 4 and chloride in a peroxymonosulfate (PMS) system. The measured value was 12.01 μM within 12 h under the given conditions. Structure analysis of raw and used g-C 3 N 4 demonstrated that g-C 3 N 4 decomposition indeed occurred, and C = N bonds acted as primary active sites, releasing N resources for subsequent DCAN formation. Additionally, multiple parameters, including the reactant (i.e., g-C 3 N 4 , PMS, Cl - , phenol) dose and solution pH, were observed to remarkably affect the yield of DCAN. Phenol was identified as the organic precursor of DCAN and may cooperate with inorganic chloramine to promote DCAN formation via the decarboxylation pathway. This study highlights the generation of DCAN in N-involved catalyst-based AOPs and improves understanding of the DCAN formation mechanism.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Sciences
·
2024
·
IF 5.9
Li-Zhi Huang,Jingjing Lin,Weiguo Chen,Wei Wang,Yitao Dai,Ivan P. Pozdnyakov,Bingbing Hu
The persistence of chlorinated alkanes in aquatic environments poses significant health risks due to its biotoxicity and high volatility, which contributes to both water and air pollution. This study investigates the efficacy of carbon dioxide radical anion (CO 2 • − ) mediated advanced reduction processes (ARPs) for the reductive dechlorination of chlorinated alkanes using small molecular monocarboxylic acids (SMAs) under UV irradiation. The study focused on formic acid (HCOOH), acetic acid (CH 3 COOH), and propionic acid (CH 3 CH 2 COOH) to generate CO 2 • − , revealing that UV/HCOOH system exhibits a notably high chloroform (CF) degradation efficiency of 97.8% in 90 minutes. Kinetic studies indicated a linear relationship between the HCOOH concentrations and the observed reaction rate constants ( k obs ), demonstrating that CO 2 • − production is crucial for CF degradation. Electron paramagnetic resonance spectroscopy identified CO 2 • − and hydroxyl radicals (HO•) as the active species, with the former playing a predominant role in CF degradation. The study also explored the influence of carbon chain length in SMAs on CF degradation, finding that longer chains decrease the degradation efficiency, potentially due to reduced UV activation. A higher reaction rate constant ( k obs ) under acidic conditions, with a marked decrease in efficiency as the pH exceeds 3.7, where HCOO − becomes predominant. This study enhances our understanding of CO 2 • − mediated ARPs and explores potential applications in environmental remediation, providing insights into the pathways and mechanisms of CF degradation. The UV/SMAs systems offer advantages for practical applications, such as milder reaction conditions and higher efficiency compared to traditional methods.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2024
·
IF 3.8
Lv Jie,He Chengcai,Cao Jingcheng,Shuai Qiuyan,Liu Xifang,Li Meng,Lin Yulong
The abnormal expression of acetylcholinesterase (AChE) is linked to the development of various diseases. Accurate determination of AChE activity as well as screening AChE inhibitors (AChEIs) holds paramount importance for early diagnosis and treatment of AChE-related diseases. Herein, a fluorescent and colorimetric dual-channel probe based on gold nanoclusters (AuNCs) and manganese dioxide nanosheets (MnO 2 NSs) was developed. The fluorescence of AuNCs was suppressed in the presence of MnO 2 NSs, providing a platform for fluorescence-based detection. For colorimetric, the nanocomposites exhibited oxidase-like activity, rapidly catalyzing 3,3′,5,5′-tetramethylbenzidine (TMB) to generate a blue color. Thiocholine (TCh), produced through the enzymatic reaction of acetylthiocholine (ATCh) in the presence of AChE, can reduce the MnO 2 NSs, thus recovering the suppressed fluorescence of AuNCs and decreasing oxidase-like activity. Based on this principle, a dual-mode assay for AChE detection was achieved. Compared to the commonly used single-signal detection, multi-mode detection can offer reliable and accurate results, due to its inherent self-validation and self-regulation capabilities. Under optimum conditions, the limit of detection (LOD) for AChE activity was 0.067 mU mL –1 (fluorescent mode) and 0.042 mU mL –1 (colorimetric mode). Moreover, the probe realized AChE detection in biological samples and AChEIs screening. This work showed the great prospects for early diagnosis of AChE-related diseases. Graphical
✓ 已验证
产品关联
DOI
PubMed
高影响因子