SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Meiling Liu,Liping Wang,Qilong Fan,Ningning Xiao,Zhiwen Chen,Yingying Dong,Chuanliang Zhao,Yongxia Sun,Xing Xu,Wendong Wang
Nitrogen (N)-doping has been reported effective to reinforce catalysis in advanced oxidation processes (AOPs) due to the formation of N-related active sites. Although several documents have reported that transition metal-nitrogen (metal-N x ) sites could work as reactive centers, the catalytic mechanism was hardly elucidated. In this study, N-doped cobalt oxide (N-CoO x ) was initiatively prepared via calcination in ammonia atmosphere to construct cobalt-nitrogen (Co-N x ) sites. The emergence of Co-N x sites effectively improved peroxymonosulfate (PMS) activation efficiency (above 5.8 times), leading to higher pollutant decomposition rate (95.8 % at 30 min) and kinetics constant (above 4.1 times). N introduction changed main facets of material and elevated adsorption energy (E ads ) (from −1.81 eV to −3.71 eV) between catalyst and PMS. Co atoms at Co-N x sites could donate larger quantity of electrons (from 1.088 e to 1.583 e) to PMS, therefore, contributed to stretching and breaking O–O bonds of PMS molecules to form reactive species. As a result, both radical and electron transfer pathway (ETP) were enhanced in the oxidation processes. Ultimately, the catalytic membrane coated with N-CoO x maintained 100 % treatment towards continuous antibiotic wastewater at environmentally relevant concentration (μg/L), realizing purification as well as separation of catalyst. This work systematically elaborates the superiority of Co-N x sites and unravels the underlying mechanism to inspire further study to metal-N x tailored catalysis.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Haiying Cui,Yiran Yang,Tariq Aziz,Fahad Al-Asmari,Manal Y. Sameeh,Lin Lin
This study aimed to evaluate the efficiency of edible films made from chlorogenic acid/chitosan (CGA/CS) nanoparticles combined with photodynamic technology (PDT). Hydroxypropyl starch (HS) and κ-carrageenan (KC) were used as the main ingredients in the preservation of Mongolian cheese under the PDT condition. The mechanical characteristics, water vapor adsorption, solubility, permeability, and release of chlorogenic acid in aqueous media were evaluated. The incorporation of CGA/CS significantly enhanced the tensile strength and barrier characteristics of the edible films. The antimicrobial efficacy of the edible film was assessed over a period of 7 days while the cheese was being stored, followed by PDT application. The use of antimicrobial PDT did not cause lipid oxidation in cheese samples. Additionally, the combination of CGA/CS@HS/KC helped to reduce fat oxidation in Mongolian cheese. Utilizing an edible film in conjunction with PDT presents a viable solution for prolonging the shelf life of Mongolian cheese while maintaining its sensory attributes and nutritional qualities.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Wenlin Wang,Xianling Wang,Gang Li,Xiuting Wu,Qian Yu,Yan Wang,Xinjie Zhao,Jia Gao,Jing Wang
The design of heterojunction and active crystal face is an effective way to promote the separation and migration of photogenerated charge in the process of photocatalytic reaction. In this work, the band gap intercalation Bi 3 O 4 Br/Bi 2 O 2 CO 3 /g-C 3 N 5 (BBC) ternary photocatalyst was successfully designed by one step hydrothermal method. It is found that under alkaline conditions, the addition of g-C 3 N 5 to Bi 3 O 4 Br leads to the preferential growth of the (0 0 1) crystal face of the third phase Bi 2 O 2 CO 3 , and the (0 0 1) crystal face is the active crystal face of the photocatalytic reaction. In addition, the constructed double Z-scheme heterojunction has two different electron transport pathways and bidirectional interface electric fields, which reduces the electron-hole pair recombination rate, maintains a strong redox ability, and enables the photogenerated carrier to effectively separate and transfer, thus improving the catalytic activity of the material. Under visible light irradiation, 15 %BBC presented excellent catalytic activity, the degradation rates of ARB ( k = 0.0238 min −1 ), HCl-TC ( k = 0.0183 min −1 ) and RHB ( k = 0.0200 min −1 ) exceeded 90 % within 120 min. This work is not only of great significance for the purification of water pollution, but also provides a new way for further exploration of novel composite photocatalytic systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
WATER RESEARCH
·
2024
·
IF 11.4
Xiaoxiang Cheng,Dongshun Sai,Xinsheng Luo,Haiqing Chang,Peijie Li,Jingtao Xu,Daoji Wu,Heng Liang
Ultrafiltration (UF) is increasingly used in the pretreatment of shale gas produced water (SGPW), whereas severe membrane fouling hampers its actual operation. In this work, ferrate(VI)-based oxidation was proposed for membrane fouling alleviation in SGPW pretreatment, and the activation strategies of calcium peroxide (CaO 2 ) and ultraviolet (UV) were selected for comparison. The findings indicated that UV/Fe(VI) was more effective in removing fluorescent components, and the concentration of dissolved organic carbon was reduced by 24.1 %. With pretreatments of CaO 2 /Fe(VI) and UV/Fe(VI), the terminal specific membrane flux was elevated from 0.196 to 0.385 and 0.512, and the total fouling resistance diminished by 52.7 % and 76.2 %, respectively. Interfacial free energy analysis indicated that the repulsive interactions between pollutants and membrane were notably enhanced by Fe(VI)-based oxidation, thereby delaying the deposition of cake layers on the membrane surface. Quenching and probe experiments revealed that high-valent iron intermediates (Fe(IV)/Fe(V)) played significant roles in both CaO 2 /Fe(VI) and UV/Fe(VI) processes. Besides, hydroxyl radicals ( • OH) were also important reactive species in the UV/Fe(VI) treatment, and the synergistic effect of Fe(IV)/Fe(V) and • OH showed a positive influence on SGPW fouling mitigation. In general, these findings establish a theoretical underpinning for the application of Fe(VI)-based oxidation for UF membrane fouling mitigation in SGPW pretreatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
BIOMATERIALS
·
2024
·
IF 12.8
Fan Yang,Rui Shu,Wenyu Dai,Bin Li,Chuang Liu,Hang Yang,Hannah M. Johnson,Sheng Yu,Ding Bai,Weizhong Yang,Yi Deng
Pathogenic infection leads to excessive senescent cell accumulation and stagnation of wound healing. To address these issues, we devise and develop a hydrogen selenide (H 2 Se)-evolving bio-heterojunction (bio-HJ) composed of graphene oxide (GO) and FeSe 2 to deracinate bacterial infection, suppress cellular senescence and remedy recalcitrant infected wounds. Excited by near-infrared (NIR) laser, the bio-HJ exerts desired photothermal and photodynamic effects, resulting in rapid disinfection. The crafted bio-HJ could also evolve gaseous H 2 Se to inhibit cellular senescence and dampen inflammation. Mechanism studies reveal the anti-senescence effects of H 2 Se-evolving bio-HJ are mediated by selenium pathway and glutathione peroxidase 1 (GPX1). More critically, in vivo experiments authenticate that the H 2 Se-evolving bio-HJ could inhibit cellular senescence and potentiate wound regeneration in rats. As envisioned, our work not only furnishes the novel gasotransmitter-delivering bio-HJ for chronic infected wounds, but also gets insight into the development of anti-senescence biomaterials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS ES&T Water
·
2024
·
IF 4.8
Wei Yang,Guoyan Dang,Manabu Fujii,Chao Cai,Yu Wei,Yanrong Zhang
Sulfite [S(IV)]-based advanced oxidation processes (AOPs) have emerged as a promising strategy to address ever-growing water pollution. In this study, a novel three-dimensional hierarchical porous copper (3D-Cu) catalyst was fabricated via laser 3D printing. The 3D-Cu catalyst demonstrated remarkable efficiency as an S(IV) activator for the efficient removal of tetracycline hydrochloride (TC), comparable to that of copper powder under similar conditions. Impressively, the 3D-Cu catalyst manifested superb stability and reusability, maintaining a high reactivity even after 40 successive cycles. The results indicated that Cu(II) sites functioned as active sites for S(IV) oxidative activation, with the unique 3D hierarchically porous structures enhancing accessibility to these active sites and facilitating the migration of S(IV) and contaminants. Furthermore, ryegrass seeds and Vibrio fischeri exposure experiments suggested that the mineralization process of TC could effectively reduce its biotoxicity. Additionally, the CaSO3/3D-Cu system exhibited excellent adaptability to different natural water matrices and was even effective in eliminating contaminants in actual wastewater. Overall, this study provides a new strategy for the preparation of efficient and durable heterogeneous S(IV) activators and advances the application of S(IV)-AOPs in real-world wastewater treatment.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Cleaner Production
·
2025
·
IF 10
Mingjie Huang,Bingyuan Xu,Ke Feng,Wei Xiang,Xiaohui Wu,Yiliang Lv,Tao Zhou
Microscale zero valent iron (ZVI) is a promising material for in situ water purification through O 2 activation, but its activity is hindered by the slow electron transfer rate caused by the shielding effect of the surface passivation layer. Herein, we introduce a synergistic strategy that combines an inorganic ligand, i.e., tetrapolyphosphate (TPP), with magnetic field (MF) to boost the O 2 activation efficiency of ZVI under neutral conditions. This approach has resulted in a 4.7-fold increase in the degradation rate of diclofenac (DCF) compared to the MF-unassisted system and a remarkable 22.0-fold improvement over an analogous system with MF and EDTA. Multiphysics simulations, batch experiments, and characterizations revealed that the enhanced degradation rate was not only attributed to the elevated magnetic gradient on the ZVI surface to enrich the paramagnetic O 2 and Fe ions, but also to the functions of TPP to suppress the annihilation of •OH and reduce the redox potential of Fe 2+ /Fe 3+ . Furthermore, a synergistic mechanism between MF and TPP that facilitates the detachment of the surface-bound Fe 3+ -TPP complex into the aqueous phase, thereby regenerating the surface active sites was elucidated. This study underscores the potential of the MF-TPP synergy as an effective strategy to enhance ZVI-based Fenton-like catalysis for pollutant remediation.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CATALYSIS
·
2024
·
IF 6.5
Hang Li,Kaisheng Yao,Tianhang Liu,Tianhang Han,Qi Wang,Aozhou Wang,Weiwei Lu
Bimetallic AuPd plasmonic photocatalyst is a promising candidate for catalyzing selective oxidation of aromatic alcohol. However, developing a simple one-step method for the preparation of free-standing AuPd nanostructures with excellent photocatalytic performance remains a huge challenge. Here, a facile liquid–liquid interface route was exploited to one-pot prepare free-standing AuPd alloy nanowires (NWs) under mild conditions. Specifically, Au 1 Pd 1 NWs are grown via oriented attachment at chloroform-water interface and 40 °C with Na 2 PdCl 4 and HAuCl 4 as precursors and 1-naphthol as reductant. Au 1 Pd 1 NWs possess many advantages, such as thin diameter (4.0 nm), large aspect ratio, abundant defects and strong Au-Pd electronic interaction. During benzyl alcohol oxidation to benzaldehyde, Au 1 Pd 1 NWs exhibit excellent photocatalytic activity and durability. At 40 min of visible light illumination, 98 % conversion of benzyl alcohol and 100 % selectivity to benzaldehyde are finished. After five cycles, Au 1 Pd 1 NWs still maintain high photocatalytic activity. Compared to pure Au NWs, alloying Pd with Au in Au 1 Pd 1 NWs dramatically enhances photocatalytic activity. The results indicate that the generated abundant •O 2 – under illumination play an important role in significantly improving benzyl alcohol oxidation to benzaldehyde.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2024
·
IF 7.4
Minghao Xu,Mei Qin,Xuerui Yang,Lei Zhou,Hui Liu
In this study, CoCuFe-LDH with SO 4 2− as interlayer anion was prepared by a pot solvothermal method, which exhibited excellent peroxymonosulfate (PMS) activation performance for the degradation of sulfamethoxazole (SMX) over a wide pH range (3.0–12.0). Under the optimal condition, the SO 4 2− -CoCuFe-LDH/PMS system resulted in 99.1 % SMX (10 ppm) degradation in 4 min. Even for 50 ppm SMX, the degradation efficiency and COD removal rate approached 93.3 % and 70.0 % within 10 min, respectively. The current catalyst showed excellent stability after 5 times recycling experiments. The high-valent metal-oxo species were the major reactive oxygen species, and the SO 4 •− , • OH, O 2 •− , and 1 O 2 were involved in the degradation of pollutant. The SO 4 2− interlayer could expand the interlayer spacing of LDH, which facilitated the diffusion of PMS and pollutants within the interlayer and improved the utilization efficiency of the active sites. The current study provided novel insights into the designation of LDH structures in advanced oxidation processes.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Yali Song,Ziyan Li,Cairong Yang,Xiaojing Zhang,Qiong Wang,Xiaoyu Wen,Hongzhong Zhang,Long Huang
A simple method for preparing C self-doped g-C 3 N 4 (CCN) was proposed by calcining urea and barbituric acid to effectively degrade sulfamethoxazole (SMX). X-ray photoelectron spectroscopy and element content analysis implied C atom replaced the original position of the bridging N atom to form CCN. Compared to g-C 3 N 4 , the absorption edge of CCN was red-shifted. As a result, the band gap of CCN was reduced, which improved the light absorption capacity of CCN and the separation efficiency of photogenerated electron-hole. Ultimately, the photocatalytic activity of CCN was finally boosted. CCN can effectively degrade SMX under visible light. Among CCN with various C dosage, when 0.05 g of barbituric acid was added in the preparation process, the obtained sample (CCN-0.05) exhibited uppermost degradation efficiency on SMX, which can reach 99.0 % after irradiation for 60 min. Additionally, the first-order kinetic reaction rate constant (0.086 min −1 ) was 8.9 times higher than that of g-C 3 N 4 (0.0097 min −1 ). Electron paramagnetic resonance and trapping experiments showed that the dominant reactive species on SMX degradation were surface ·O 2 − and photogenerated holes by CCN-0.05 under visible light. Moreover, CCN-0.05 can still achieve effective removal of SMX under actual water backgrounds and showed selective degradation on sulfonamides.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2025
·
IF 5.1
Juan Xia,Dan Zheng,Ping Han,Chengying Yang,Mengdie Wang,Chenchen Liu,Xu Sun,Qi Wang
Due to the high costs and relative instability of natural enzymes, highly efficient enzyme mimics have attracted much research interest in constructing nanozymes of biosensors. This study fabricated Co 9 S 8 nanozymes with diverse morphologies by adjusting the sulfur content in a facile and efficient solvothermal strategy using the Co-glycerate microsphere as the sacrificial template. Our findings revealed that sulfur-mediated surface reconstruction, especially at an optimal sulfur concentration, enables the fabrication of the M−Co 9 S 8 nanozyme with a hollow nanosphere structure. The nanozyme exhibits exceptional peroxidase-like activity. In the presence of H 2 O 2 , M−Co 9 S 8 nanozyme significantly enhanced the oxidation of 3,3′,5,5′-tetramethylbenzidine (TMB), resulting in a pronounced color change, thereby enabling the colorimetric sensing of glutathione (GSH). The systematic studies, including radical scavengers and electron spin resonance experiments, confirm that superoxide free radicals (·O 2 − ) play a key role in catalytic reactions and exhibit a synergistic effect with holes ( h + ). Based on these active radicals and the optimized electron transfer efficiency of the hollow porous spherical shell structure, the M−Co 9 S 8 nanozyme showed a catalytic efficiency of 5.44 times higher than that of L-Co 9 S 8 solid nanospheres with low sulfur content. The strategy demonstrated high sensitivity, excellent specificity, and robust stability. It featured a 5-order linear range and a detection limit as low as 3.16 nM for the detection of GSH, rendering it highly promising for clinical sample detection. A deeper understanding of Co 9 S 8 ′s surface reconstruction could offer crucial insights for developing high-performance nanomaterials and biosensors, broadening their potential applications in biosensing and biomedicine.
✓ 已验证
产品关联
DOI
高影响因子
CHEMISTRY OF MATERIALS
·
2024
·
IF 7.2
Lingling Kang,Cong Chao,Chenchen Xiong,Shuang Yu,Changtao Xiao,Changsheng Zhao,Shisheng Cui,Jiguang Li,Jing Li,Jianbing Shi,Bin Tong,Zhuo Wang,Yin Song,Weiqian Zhao,Zhengxu Cai,Yuping Dong
Exciton dynamics exert a pivotal role in the photodynamic efficiency of photosensitizers, however, strategies for modulating exciton dynamics to motivate electron transfer in exciton-involved photoreactions remain largely unexplored. Herein, we employed a cutting-edge microfluidic platform combined with computational fluid dynamics to encapsulate a commercial type II PS [rose Bengal (RB)] within a rigid host matrix. This encapsulation yielded host/RB nanoparticles (NPs) with a uniform structure and controllable size. The photoexcited dynamics of these host/RB NPs were characterized using time-resolved spectroscopy, and the results revealed that encapsulation not only extended the triplet exciton lifetime of RB, but also created an optimized environment to motivate electron transfer between RB molecules. These findings rationalize the observed remarkable 20-fold reduction in type II photoreaction and a 3-fold promotion in type I photoreaction for host/RB NPs. Due to the dramatic generation of HO• and O2•–, host/RB NPs demonstrated excellent ability for the in vitro eradication of Staphylococcus aureus and Escherichia coli biofilms and the in vivo treatment of S. aureus-infected wounds under hypoxia, with a minimum killing concentration of 10–7 M. This work sheds light on the motivation of exciton transfer to develop type I PS with enhanced photodynamic properties.
✓ 已验证
产品关联
DOI
高影响因子