JOURNAL OF CHROMATOGRAPHY A
·
2018
·
IF 3.716
Wenqing Li,Rong Wang,Zilin Chen
A novel metal-organic framework UiO-66-modified cotton was prepared and applied to solid phase microextraction of non-steroidal anti-inflammatory drugs, namely ketoprofen, naproxen and flurbiprofen. UiO-66 was immobilized onto the surface of cotton by a polydopamine functionalized method. The resultant cotton@PDA@UiO-66 was characterized by Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy. The solid phase microextraction conditions were optimized, including sampling flow rate, formic acid content of the eluent, pH value of sample solution, NaCl content and sample volume. By combining with HPLC, this method showed high extraction efficiency (the enrichment factors of ketoprofen, naproxen and flurbiprofen were 44, 49 and 45, respectively), wide linear range (0.1–500 ng/mL), good linearity with R ≥ 0.9996 and satisfactory sensitivity (LODs ≤ 0.03 ng/mL, LOQs ≤ 0.1 ng/mL), as well as good reproducibility (RSD ≤ 4.51%). This method was also successfully applied to extraction of NSAIDs in swine muscle sample. Good recoveries were obtained, ranging from 88.54% to 95.7% with relative standard deviations less than 3.77%.
研究领域:
分析化学
·
药物分析
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMISTRY OF MATERIALS
·
2017
·
IF 9.466
Jian Yang,Xiaojing Chen,Yongsheng Li,Qixin Zhuang,Peifeng Liu,Jinlou Gu
For practical biomedical applications, the stabilization of nanoscale metal–organic frameworks (NMOFs) in the presence of phosphate is of prime importance but remains a significant challenge because of the inevitable and strong driving force between metal clusters and phosphate species to form metal-phosphate in physiological environments. Through shielding Zr-NMOFs within the continuous phospholipid bilayers (PBLs), herein, we figured out a unique way to protect the vulnerable coordination bonds in their frameworks from the attack of phosphate. To exemplify the facility of constructing PBLs on Zr-NMOFs core, a porphyrinic NMOF of PCN-223 (standing for a platform with broad biological applications) was elaborated using a triethylamine (TEA)-modulated strategy. TEA could not only control the phase transformation of porphyrinic MOFs to achieve pure-phase PCN-223 crystals but also minimize their particles size down to sub-200 nm. Negative-stained TEM, FT-IR and XPS techniques revealed that PBLs could be closely coated onto the surface of nanoPCN-223, thanks to the strong Zr–O–P chemical complexation between Zr-NMOFs and phospholipid. The resultant coated nanoPCN-223 exhibited significantly enhanced phosphatic-resistance in phosphate buffer solution (PBS) and presented exceptional stability in harsh chemical environments. Furthermore, the MOFs-supported PBLs could effectively provide a stable biocompatible interface for subsequent cell culture and improve their biocompatibility, cellular uptake efficiency and real biostability of NMOFs in cellular environments. This study offers an alternative system for forming stable PBLs supported on NMOFs, and represents the first example of stabilizing Zr-NMOFs free from the attack of phosphate species in biological media.
研究领域:
纳米技术
·
生物医学工程
·
材料科学
·
生物材料
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2024
·
IF 4.7
Xin-Hao Shen,Feng Liu,Qin-Qin Chen,Ying Gao,Xiao-Wen Wang,Xin Liu
The efficient degradation of emerging pollutants in water, represented by CBZ, is receiving increasing attention from all sectors of society. Although advanced oxidation reactions represented by Fenton reaction can efficiently degrade emerging pollutants, the problem of iron sludge that comes with it is hindering the further promotion of this technology. Herein, UiO-66(Zr)-2OH material was synthesized by hydrothermal method and loaded with Pd 0 NPs on the surface of the material by in situ reduction. The MOFs-H 2 -Accelerated Catalytic Fenton system was constructed by accelerating the regeneration of Fe(II) in the system by activating the [H] produced by H 2 introduced into the system at room temperature and pressure. Within 180 min, the removal of the target pollutant CZB could reach more than 99 % under the condition of only 25 µmol of Fe(II) and 25 mmol of H 2 O 2 .
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2016
·
IF 3.349
Xing Chu,Dan Zhou,Dan Li,Kun Xia,Ning Gan,Xinhuan Lu,Renfeng Nie,Qinghua Xia
This work has firstly constructed purely Lewis acidic sites on MCM-41 successfully, for which Zr-MCM-41 catalysts with different Zr contents are prepared through the hydrolysis of ZrOCl 2 on MCM-41, followed by calcination . Thus-prepared materials possess typical hexagonal mesostructures, irregular morphologies, large surface areas, and large pore sizes, as revealed by XRD , SEM, TEM, N 2 adsorption, and DRIFT FTIR. UV–vis, Raman and XPS spectra prove the formation of isolated species in high dispersion on the surface of MCM-41. NH 3 -TPD analysis shows that the acid intensity of the catalysts is proportional to the content of Zr, and the acidity of Zr-MCM-41 with the Zr content of <0.5% is very weak. Pyridine-IR spectra show that the surface acidity is mainly consisted of Lewis acidity, and solely Lewis acidic sites are constructed on Zr-MCM-41(550) with a low Zr content < 0.5 wt%. More Lewis acidic sites exposed on the surface of Zr-MCM-41 are considerably important for promoting the titled Prins condensation.
研究领域:
催化化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2018
·
IF 5.116
Yongxiang Chen,Yunjiao Li,Wei Li,Guolin Cao,Shuyun Tang,Qianye Su,Shiyi Deng,Jia Guo
The stabilities of the host and interfacial structure for layered LiNi x Co y Mn 1-x-y O 2 cathode materials are critical for their electrochemical properties, especially at high voltage. This study reports the synergetic effect of the Zr and Ti elements on the LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode material (NCM523). The as-obtained Zr/Ti modified LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode material shows the excellent electrochemical performance at high voltage. It delivers 167.3 mAh·g −1 at 1 C over 3.0–4.4 V corresponding 94.20% capacity retention after 200 cycles. Moreover, the rate capability of Zr/Ti co-modified NCM523 at 16 C (3.0–4.4 V) rises to 139.4 mAh·g −1 and corresponding capacity retention (vs. 0.5 C) is 79.57%. In addition, its capacity retention reaches to 91.71% after 100 cycles at 1 C rate even at 3.0–4.6 V. Such superior electrochemical performances are ascribed to the Zr doping and Ti modification. The synergetic modifications of the Zr/Ti elements not only stabilize the crystal structure, but also absorb the lithium residues to form mixed Li 4 Ti 5 O 12 /Li 2 TiO 3 coating layers, which strengthen the stability of the interfacial structure and the kinetic characteristics of the cathode materials.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2024
·
IF 4.9
Xue Men,Rong Li,Aiwen Su,Yanli Zhang,Lian-Xun Gao,Chengxin Wu,Hongbin Wang,Wenrong Yang,Pengfei Pang
Protein kinase A (PKA) plays a significant role in the regulation of biological activities by the phosphorylation of the specific proteins or substrate peptides. The highly sensitive and reusable electrochemical biosensor has been developed to detect PKA activity based on the specific coordination between Zr 4+ and phosphate group. In this strategy, the specially designed substrate peptide can be anchored on the surface of gold electrode by Au-S bond. In the presence of adenosine triphosphate (ATP) and PKA, the substrate peptide is phosphorylated. Due to the large surface area of MOF and rich Zr 4+ active sites, signal molecule Thionine (Thi) can be absorbed into the cavity of NH 2 -Zr-MOF by the electrostatic interaction to form NH 2 -Zr-MOF@Thi signal probe. The phosphorylated peptide is linked to NH 2 -Zr-MOF@Thi probe because of the strong coordination interaction between Zr 4+ and phosphate group. Therefore, the number of Thi close to the electrode surface is increased and the response signal experiences amplification, markedly enhancing the sensitivity of the detection of PKA activity, which provides an excellent electrochemical sensing platform for PKA activity detection. The response signal of the electrochemical biosensor is proportional to the logarithm of PKA concentration, ranging from 0.05 U mL −1 to 100 U mL −1 , and the limit of detection of this biosensor for PKA is 0.017 U mL −1 when the signal-to-noise ratio is 3. In particular, the proposed method can selectively distinguish the target from other interferents, and can be used to screen potential small molecule inhibitors and detect PKA activity in complex cell samples. Therefore, the developed electrochemical biosensor can be used as a new way for the determination of PKA activity and the screening of its inhibitors in the future.
研究领域:
生物化学
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Chen Wang,Chao Xiong,Yali He,Chen Yang,Xiteng Li,Jianzhong Zheng,Shixing Wang
A novel magnetic Zr-MOF named Ni 0.6 Fe 2.4 O 4 -UiO-66-PEI was synthesized by modifying UiO-66-NH 2 with Ni 0.6 Fe 2.4 O 4 and polyethyleneimine and its sorption characteristics for two representing heavy metals Pb(II) and Cr(VI) in water were examined. This material showed good thermal stability and was sufficiently magnetic to allow effective solid-liquid separation. The material had a maximum adsorption capacity of 273.2 mg/g for Pb(II) at pH 4.0 and 428.6 mg/g for Cr(VI) at pH 3.0, as obtained from the model fitting by the Hill equation. The sorption kinetics for both heavy metals on the material was fast, with adsorption equilibrium established in 60 min and 30 min for Pb(II) and Cr(VI), respectively. Model fitting of the kinetic data showed that Pb(II) and Cr(VI) sorption on Ni 0.6 Fe 2.4 O 4 -UiO-66-PEI followed the pseudo-second-order model. This material had good selectivity for competing ions, and still hold fairly good binding capacities after 5 times of regeneration. Adsorption mechanisms for Pb(II) and Cr(VI) by Ni 0.6 Fe 2.4 O 4 -UiO-66-PEI were proposed by analyzing FTIR, XPS and the electrokinetic property of the material. Specifically, Pb(II) adsorption on Ni 0.6 Fe 2.4 O 4 -UiO-66-PEI could be attributed to chelation of Pb(II) with the imine/amine functional groups in the material’s matrix, while Cr(VI) adsorption might stem from a combination of electrostatic attraction, chelation and redox reaction. It seems that Ni 0.6 Fe 2.4 O 4 -UiO-66-PEI could be used as a green and environmental-friendly material for heavy metals removal, particularly from acidic water streams.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2022
·
IF 8.035
Ruolan Li,Zongqian Wu,Ya Chen,Xingyan Liu,Weiwei Guo,Yumin Huang,Min Fu,Youzhou He
An efficient bifunctional porphyrin-based MOF is fabricated for photocatalytic hydrogen evolution and NO removal, in which the mixed Zr/Ti-oxo clusters are the metal nodes and uniformly distributed Pt nanoparticles (Pt NPs) are the co-catalysts. It is worth noting that the optimal Zr-MOF-s(Pt)(Zr/Ti)-R is obtained through replacing partial Zr(IV) with Ti(IV) in the original Zr-based porphyrin MOFs and in-situ generating confined Pt NPs with a relatively small size within the internal cavities. Compared with the majority of reported Zr-based porphyrin MOFs, the Zr-MOF-s(Pt)(Zr/Ti)-R exhibits an extremely high hydrogen evolution activity (2545.11 μmol·g −1 ·h −1 ) and NO removal rate (46.6 %) under visible light irradiation. The excellent photocatalytic performance should be ascribed to the reason that the mixed Zr/Ti-oxo cluster and the in-situ generated Pt NPs significantly promote the rate of charge transfer and separation. Moreover, the photocatalytic NO oxidation process was also monitored by in - situ DRIFTS, which indicates the Zr-MOF-s(Pt)(Zr/Ti)-R could realize the effective oxidation of NO and intermediates to the final product (NO 3 – ). This work provides us with a practical route to further improve the photocatalytic performance by synergistically modifying the original metal clusters to adjust the ligand-to-metal charge transfer efficiency and in-situ introducing metal nanoparticles to form Schottky junctions.
研究领域:
材料科学
·
环境科学
·
光催化
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2023
·
IF 7.2
Pengxiao Liu,Yan Jia,Yao Ning,Xiaocheng Zhang,Shuhui Tian,Fan Yang,Weiyu Song,Ying Zhang
This study demonstrates the significant effect of incorporating inexpensive transition metal nanoparticles into metal-organic frameworks (MOFs) to improve their room-temperature hydrogen storage properties. Low-cost nanoparticles (Cu, Ni, and CuNi) were incorporated into UiO-66(Zr) via the double-solvent approach (DSA) plus chemical reduction processes. All composites exhibited higher hydrogen storage capacity compared to pure UiO-66 at both room temperature and 60 bar. Notably, the hydrogen spillover efficiency of CuNi nanoparticles loaded in UiO-66 was comparable to that of MOF adsorbents embedded with noble metals such as Pd and Pt. The hydrogen storage capacity of CuNi@UiO-66 was significantly increased from 0.20 wt% to 0.74 wt%. DFT calculations showed that the CuNi alloys facilitated the adsorption and dissociation of hydrogen molecules in comparison to the single metal nanoparticles , thus favoring the hydrogen spillover effect and improving the hydrogen storage performance. This work demonstrates the potential of designing MOF loaded with inexpensive metal nanoparticles for optimized room-temperature hydrogen storage.
研究领域:
材料科学
·
纳米技术
·
能源存储
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
·
2019
·
IF 2.752
Wen Cui,Xiaoli Kang,Xiaoying Zhang,Xudong Cui
A highly efficient Rhodamine B (RhB) adsorbent based on a gel-like ZnO/Zr-metal-organic framework (ZnO/Zr-MOF) composite was prepared by reacting ZnO nanoparticles with glacial-acetic-acid-modulated Zr-MOF(bpy) via a sample solvothermal method. Introduction of ZnO greatly improved the texture properties of the parent Zr-MOF(bpy), and the resulting material exhibited an agglomerate morphology consisting of numerous quadrate nanoparticles, which is quite different from the cubo-polyhedron morphology of Zr-MOF(bpy). In this way, this composite showed a considerable RhB absorption capacity from aqueous solution in a wide pH range. The adsorption kinetics , isotherms and thermodynamics of the RhB adsorption by ZnO/Zr-MOF(bpy) were discussed and confirmed that this adsorption process satisfied pseudo-second-order kinetics and the Langmuir model, and was a spontaneous exothermic process. Moreover, the excellent adsorption performance is likely related to the synergism of hydrogen bonding , electrostatic interactions and π–π interactions between the ZnO/Zr-MOF(bpy) nanocomposite and RhB. The excellent texture properties of ZnO/Zr-MOF(bpy) promote the adsorption and diffusion of RhB on it, which is also crucial during the adsorption process.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2019
·
IF 4.084
Fufeng Cai,Peijing Lu,Jessica Juweriah Ibrahim,Yu Fu,Jun Zhang,Yuhan Sun
Methanol steam reforming is regarded as a very promising process to generate H 2 suitable for fuel cells. Typically, the Pd-based catalysts can catalyze efficiently methanol steam reforming for hydrogen production . But their high selectivity to CO, a byproduct of methanol reforming reaction , severely limits their potential application. In this work, a series of Nb-modified Pd−Zr−Zn catalysts with different Nb loadings were prepared to study their catalytic activities with more focus on the role of Nb on Pd−Zr−Zn catalyst for methanol steam reforming. The prepared catalysts were fully analyzed by using various characterization techniques, for example, ICP , BET, SEM, XRD , H 2 -TPR, NH 3 -TPD, HRTEM , CO chemisorption , XPS, and Raman. The experimental results showed that an increase in Nb loading for the Nb-modified Pd−Zr−Zn catalysts led to a decrease of the methanol conversion and H 2 production rate. This was probably due to the decrease in the amount of oxygen vacancies on the catalyst surface . However, introduction of Nb into Pd−Zr−Zn catalyst increased the acid strength on the catalytic surface. The aldehyde species derived from methanol decomposition were readily transformed to HCOOH, thus yielding high selectivity to CO 2 for the Nb-modified Pd−Zr−Zn catalysts. Significantly, the addition of Nb to Pd−Zr−Zn catalyst facilitated the incorporation of Pd into the ZnO lattices, which led to the formation of Pd−Zn alloy. Consequently, the Nb-modified Pd−Zr−Zn catalysts exhibited significantly lower CO selectivity and production rate than the Pd−Zr−Zn catalyst. From the results, this work offers a new way to the rational design of selective methanol steam reforming catalysts to decrease the formation of byproduct CO.
研究领域:
催化化学
·
能源材料科学
✓ 已验证
产品关联
DOI
高影响因子
Catalysis Science & Technology
·
2023
·Vol. 13
·期 7
·2101-2107
·
IF 5
Jianhao Qiu,Lu Zhang,Guanglu Xia,Dingliang Dai,Yong Tang,Jianfeng Yao
Different ligand functionalized UiO-66 (UiO-66-X, X = OH, (OH)2 and NH2) were prepared and then modified by ZnIn2S4 lamellas to form ZnIn2S4/UiO-66-X heterostructures for visible-light-driven H2O2 evolution in pure water. The H2O2 yields using ZnIn2S4/UiO-66-NH2, ZnIn2S4/UiO-66-(OH)2 and ZnIn2S4/UiO-66-OH are 799, 733 and 165 μmol L−1, respectively, which are 9.5, 8.7 and 2.0 times that of ZnIn2S4/UiO-66. The high performance of ZnIn2S4/UiO-66-NH2 and ZnIn2S4/UiO-66-(OH)2 is ascribed to the benign visible-light response and Z-scheme heterostructures, and the H2O2 evolution abides by indirect O2 reduction with ˙O2− as an intermediate species. Additionally, H2O2 yields using ZnIn2S4/UiO-66-NH2 on tap water and Xuanwu Lake (Nanjing, China) water can be comparable to that on the above-deionized water. This study sheds light on the great promise of functionalized MOFs and their applications on green (photo)catalytic energy conversion.
研究领域:
材料科学
·
光化学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）