CARBOHYDRATE POLYMERS
·
2020
·
IF 7.182
Chong Li,Fei Xiang,Kao Wu,Fatang Jiang,Xuewen Ni
During film formation at 60 °C, the microstructure and rheological properties of konjac glucomannan (KGM) film-forming solution and KGM/zein blend film-forming solution were investigated. The drying process of film-forming solutions was divided into two stages according to the drying curves. Scanning electron microscopy showed that KGM chains in the blend solution aggregated into thicker chains and formed a molecular network with larger pores. Zein particles grew larger but were homogeneously distributed during drying as observed by confocal laser scanning microscopy. The addition of zein improved the thermal stability of the film-forming solution. As the drying proceeded (up to 8 h), KGM solution exhibited a typical concentrated solution behavior due to molecular entanglement; whereas the blend solution gradually formed a weak gel after 2 h. Complex viscosity data for the film-forming solutions were well-fitted by the power-law model. The information obtained from the study is important for understanding the film-forming mechanism.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2020
·
IF 3.871
Wei Zhu,Wenquan Huang,Liping Ye,Yuehua Deng,Qiuling Xie,Yanbin Jiang
Zein nanoparticles have good prospects as a pharmaceutical carrier but limited in further application by its poor stability and re-dispersibility. To obtain high stability and pH-responsive drug delivery, succinylated-zein (Suc-zein) was synthesized by nucleophilic substitution reaction, the material obtained was used to prepare Suc-zein nanoparticles (SZs). The SZs prepared not only had good dispersibility but showed better stability than zein particles on pH, storage and salinity. After loading indomethacin (Indo) into zeolitic imidazolate framework-8 (ZIF-8), the core-shelled Indo-Suc-zein-ZIF-8 (Indo-SZZs) were fabricated by coating Suc-zein onto the surface of ZIF-8 with better stability and high drug loading. Indo-SZZs were pH-responsive and sustained a drug release profile in a simulated environment. Also SZZs presented as being non-toxic, having good biocompatibility and good cellular up-take performance, and the cytotoxicity of Indo-SZZs was significantly higher than that of Indo. This provides a new insight into the preparation of a zein-based oral drug delivery system.
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2019
·
IF 6.044
Li Hao,Guanquan Lin,Jiajia Lian,Long Chen,Hongjun Zhou,Huayao Chen,Hua Xu,Xinhua Zhou
In order to further enhance hydrophilicity of zein and achieve nano-scale pesticide system, phosphorylated zein (P-Zein) was incorporated with graft copolymer CMC-g-PDMDAAC by electrostatic interaction , in which carboxymethyl cellulose (CMC) and diallyldimethylammonium chloride (DMDAAC) as monomers. P-Zein/CMC-g-PDMDAAC was applied to encapsulate model pesticide avermectin (AVM) via electrostatic interaction to achieve AVM@P-Zein/CMC-g-PDMDAAC nano-pesticides. The stability, drug loading, anti-ultraviolet, adhesion, sustained-release and toxicity of nano-pesticides presented considerable behavior confirmed via various characteristics. The results indicated that AVM@P-Zein/CMC-g-PDMDAAC had an average particle size of 360 nm, and possessed favorable dispersion performance and excellent anti-ultraviolet property compared to P-Zein. And comparatively, encapsulation efficiency increased up to 82.11%. In addition, adhesion performance of AVM@P-Zein/CMC-g-PDMDAAC on foliage also improved by about 20% compared to P-Zein. Also, AVM@P-Zein/CMC-g-PDMDAAC can intelligently control pesticide release by adjusting monomer ratio and pH values. More importantly, such nano-pesticide system presented no significant difference on toxicity in comparison with bare AVM .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF POLYMERS AND THE ENVIRONMENT
·
2022
·Vol. 31
·期 1
·287-296
·
IF 4.705
Xie Shiyu,Xu Bo,Yuan Li,Zhao Yaxin,Ma Na,Wang Yaomin,Liu Dagang,Xiang Aimin,Ouyang Yuge,Tian Huafeng
Zein as a natural protein had been widely used in various fields due to its biodegradability and biocompatibility. However, its sensitivity to humidity and poor mechanical performance limited its application in practice. In this study, zein-based composite nanofibers loaded with curcumin were prepared by electrospinning assisted with polyvinyl alcohol (PVA). The filtration efficiency of the modified nanofibers to the particles with diameters larger than 0.5 μm was all above 98%. The loaded curcumin interacted with protein molecular chains to form a network structure within tightly connected nanofibers, which exhibited excellent moisture resistance and good adhesion to cellulose paper towels used as air filter substrates. Meanwhile, its tensile strength had also been enhanced vastly to 0.72 MPa compared with the initial tensile strength of 0.21 MPa. This study provides a new electrospinning strategy for the preparation of zein-based composite nanofibers that can be widely utilized in air filtration with high moisture resistance.
✓ 已验证
产品关联
DOI
高影响因子
FOOD HYDROCOLLOIDS
·
2023
·
IF 10.7
Song Cui,David Julian McClements,Xiaoyang He,Xingfeng Xu,Fenghua Tan,Dongdi Yang,Qingjie Sun,Lei Dai
The stability of Pickering emulsions can be improved by the synergistic action of colloidal particles and small molecule emulsifiers. In addition, the interaction between particles and different charge emulsifiers at the interface may result in different interfacial film structures, thus affecting the stability of Pickering emulsions. However, little is currently known about the impact of emulsifier charge on the fabrication and characteristics of these co-stabilized Pickering emulsions. Herein, we investigated the influence of Pickering emulsions co-stabilized by zein nanoparticles and anionic (quillaja saponin, QS), non-ionic (Tween 80), or cationic (lauroyl arginate ethyl hydrochloride) emulsifiers on the interfacial properties. The adsorption kinetics and rheological behavior of the molecular emulsifiers at oil/water interfaces were studied. Changes in interfacial structure and adsorption behavior were studied by confocal laser scanning microscopy (CLSM), and quartz crystal microbalance-dissipation (QCM-D) analysis. The dynamic interface characteristics showed that QS has good emulsification performance. The CLSM images indicated that the emulsifier charge impacted the interfacial structure of the Pickering emulsions. The combination of QS and zein nanoparticles formed a coating at the oil/water interface that was denser than for the other two emulsifiers, which improved the stability of the Pickering emulsions. QCM-D revealed that the interfacial film formed by anionic emulsifiers and zein nanoparticles was the thickest (about 6.6 nm). Moreover, anionic emulsifiers and zein nanoparticles stabilized Pickering emulsions provided the best protection against curcumin. These results may be important for optimizing the performance of Pickering emulsions in the food and pharmaceutical industries.
✓ 已验证
产品关联
DOI
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2023
·
IF 9.8
Hua-Jie Wang,Meng-Fei Hao,Guan Wang,Hao Peng,Fazli Wahid,Yan Yang,Lei Liang,Shan-Qin Liu,Ren-Long Li,Shu-Ying Feng
The complication of stent implantation is the biggest obstacle to the success of its clinical application. In this study, we developed a combination way of 3D printing and the coating technique for preparation of functional polyurethane stents against stent implantation-induced thrombosis and postoperative infection. SEM, XPS, static water contact angle, and XRD demonstrated that the functional polyurethane stent had a 37 μm-thickness membrane composed of zein nanospheres (250–350 nm). Meanwhile, ZnO nanoparticles were encapsulated in zein nanospheres while heparin was adsorbed on the surface, causing 97.1 ± 6.4 % release of heparin in 120 min (first-order kinetic model) and 62.7 ± 5.6 % release of Zn 2+ in 9 days (Korsmeyer-Peppas model). The mechanical analysis revealed that the functional polyurethane stents had about 8.61 MPa and 2.5 MPa tensile strength and bending strength, respectively. The in vitro biological analysis showed that the functional polyurethane stents had good EA.hy926 cells compatibility (97.9 ± 3.8 %), anti-coagulation response (comparable plasma protein, platelet adhesion and suppressed clotting) and sustained antibacterial activities by comparison with the bare polyurethane stent. The preliminary evaluation by rabbit ex vivo carotid artery intervention experiment demonstrated that the functional polyurethane stents could maintain blood circulation under the continuous stresses of blood flow. Meanwhile, the detailed data from the simulated implant infection experiment in vivo showed the functional polyurethane stents could effectively reduce microbial infection by 3–6 times lower and improve fibrosis and macrophage infiltration.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2023
·
IF 5.8
Zaifei Zhuang,Xin Cheng,Liyan Cao,Guiqiang He,Jian Zhou,Yanxia Wei
Textile dye wastewater has the characteristics of high concentration, complex composition and changeable color degree and pH, which is difficult to be effectively and completely treated, and easy to cause environmental pollution. Here, a strategy of secondary bond interface assembly of polyethyleneimine on zein microparticles (PEI) ( [email protected] ) was constructed to achieve rapid and efficient removal of Reactive Black 5 (RB5), which is one of the most widely used reactive dyes in the textile industry. Structural analysis indicated that the as-prepared PEI layer immobilized on zein microparticles was constructed based on the interface assembly dominated by hydrophobic interactions and electrostatic attraction between PEI molecules and zein chains. The novel interface showed excellent absorption performance for RB5 with an absorption capacity of 631.0 mg·g -1 , rapid adsorption in 2 min, wide pH range of 4–10. Mechanism analysis suggested the effective adsorption of RB5 by [email protected] microparticles was mainly attributed to secondary bond interface such as electrostatic interaction and hydrogen bond between RB5 and PEI immobilized on the surface of zein microparticles. Moreover, due to the presence of secondary bond interface, RB5 adsorbed on microparticles can be easily desorbed by using 0.01 M NaOH. Therefore, the strategy of secondary bond interface assembly with polyethyleneimine on zein microparticles has high potential for practical application in the treatment of dye-containing wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Mingfang Sun,Jun Wang,Jun Kang,Yaxin Zhao,Huafeng Tian,Yujuan Jin,Rakesh Kumar,Junfeng Wang
This study utilizes electrospinning to develop bio-based fibrous films composed of zein and polylactic acid (PLA), with chitosan added in varying concentrations. The resulting films exhibit remarkable filtration efficiency, capturing over 95 % of airborne pollutants, while maintaining a low pressure drop of less than 4 mbar. A key innovation in this work is the integration of chitosan. Chitosan, a naturally derived polysaccharide, significantly increases the conductivity and viscosity of the spinning solution, enhancing interactions among PLA, chitosan, and protein molecules. This leads to a robust network structure with improved hydrophobicity and a bimodal structure, both essential for maintaining high filtration efficiency without reducing breathability. The addition of chitosan effectively addresses the common issue of high pressure drop in PLA/zein composite films, improving the product's efficiency and practicality for air filtration applications. Furthermore, the inherent mechanical strength and ductility of chitosan contribute to the fibrous films' overall durability and functionality. These properties make chitosan-modified zein/PLA fibers highly suitable for air pollution control, especially in personal protective equipment. This research underscores the potential of chitosan-enhanced bio-based materials as sustainable and effective solutions for advanced air filtration technologies.
✓ 已验证
产品关联
DOI
高影响因子
LWT-FOOD SCIENCE AND TECHNOLOGY
·
2017
·
IF 2.329
Huan Yang,Kun Feng,Peng Wen,Min-Hua Zong,Wen-Yong Lou,Hong Wu
A composite zein nanofibrous mat containing fish oil and ferulic acid was successfully fabricated by electrospinning. The process became more fluent and continuous by adding 30 g/L glycerol into the polymer solutions and using modified coaxial electrospinning. The average diameter of nanofibers was 440 nm. The loading capacity and encapsulation efficiency of fish oil were 20% and 94%, respectively. FTIR data demonstrated that fish oil and ferulic acid were successfully embedded into the nanofibers and there were interactions among the molecules of zein, fish oil and ferulic acid. Addition of ferulic acid into the nanofibers significantly improved the oxidative stability of encapsulated fish oil; moreover, it did not change the release behavior of fish oil. The release of encapsulated fish oil was controlled by a combination of diffusion and macromolecular chain relaxation. This composite nanofibrous mat with favorable oxidation stability and release property is potential in application as nutrition additive.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CHEMICAL ENGINEERING
·
2017
·
IF 1.174
Dongwei Wei,Weizhi Huo,Guangmeng Li,Qiuling Xie,Yanbin Jiang
Edible zein-based films containing lysozyme (LY) and ascorbic acid (AA) were developed in the presence of polyethylene glycol 400 (PEG 400), the combined effects of LY and AA on the microstructure, mechanical properties and release properties of developed zein films were investigated in detail. The results of microstructure characterization indicated that zein-based films became compact and smooth, and LY aggregates were well distributed in the zein matrix because of the simultaneous addition of LY and AA. The results of mechanical tests showed that because of the synergistic effects of LY and AA on zein film, elongation at break of zein-based film could be up to 138%, which was 34.5 times higher than that of zein control film. LY release tests showed that when the concentration of AA was less than 3.1 mg·cm − 2 , the release rate of LY significantly decreased by 33.7%, and the total release increased by 80.6%. While the release profiles of AA showed that the release rate and total release of AA from the films containing LY increased by approximately 68.9% and 61.7% than the films without LY. Good antioxidant and sustained antimicrobial activities were found for the developed zein films.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICO-BIOLOGICAL INTERACTIONS
·
2024
·
IF 4.7
Kumar Ganesan,Cong Xu,Chunguang Xie,Yue Sui,Chuan Zheng,Fei Gao,Jianping Chen
Breast cancer (BC) is the most common cancer in women and is known for its tendency to spread to the bones, causing significant health issues and mortality. In this study, we aimed to investigate whether cryoprotective isoliquiritigenin-zein phosphatidylcholine nanoparticles (ISL@ZLH NPs) could inhibit BC-induced bone destruction and tumor metastasis in both in vitro and animal models. To evaluate the potential of ISL@ZLH NPs, we conducted various experiments. First, we assessed cell viability, colony formation, transwell migration, and wound healing assays to determine the impact of ISL@ZLH NPs on BC cell behavior. Western blotting, TRAP staining and ALP activity were performed to examine the effects of ISL@ZLH NPs on osteoclast formation induced by MDA-MB-231 cell-conditioned medium and RANKL treated RAW 264.7 cells. Furthermore, we assessed the therapeutic impact of ISL@ZLH NPs on tumor-induced bone destruction using a mouse model of BC bone metastasis. Treatment with ISL@ZLH NPs effectively suppressed BC cell proliferation, colony formation, and motility, reducing their ability to metastasize. ISL@ZLH NPs significantly inhibited osteoclast formation and the expression of factors associated with bone destruction in BC cells. Additionally, ISL@ZLH NPs suppressed JAK-STAT signaling in RAW264.7 cells. In the BCBM mouse model, ISL@ZLH NPs led to a significant reduction in osteolytic bone lesions compared to the control group. Histological analysis and TRAP staining confirmed that ISL@ZLH NPs preserved the integrity of bone structure, preventing invasive metastasis by confining tumor growth to the bone marrow cavity. Furthermore, ISL@ZLH NPs effectively suppressed tumor-induced osteoclastogenesis, a key process in BC-related bone destruction. Our findings demonstrate that ISL@ZLH NPs have the potential to inhibit BC-induced bone destruction and tumor metastasis by targeting JAK-STAT signaling pathways and suppressing tumor-induced osteoclastogenesis. These results underscore the therapeutic promise of ISL@ZLH NPs in managing BC metastasis to the bones.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Jin Chen,Zhuangwei Zhang,Huihui Li,Mengchu Sun,Hongjin Tang
The low water solubility and inadequate bioavailability of curcumin significantly hinder its broad biological applications in the realms of food and medicine. There is limited information currently available regarding the particle characteristics and functional capabilities of zein-lysozyme-based nanomaterials . Thereby, the primary goal of the current work is to effectively develop innovative zein-lysozyme- κ -carrageenan complex nanocomposites (ZLKC) as a reliable carrier for curcumin encapsulation. As a result, ZLKC nanoparticles showed a smooth spherical nanostructure with improved encapsulation efficiency. Fourier-transform infrared, fluorescence spectroscopy, dissociation assay, and circular dichroism analysis revealed that hydrophobic and electrostatic interactions and hydrogen bonding were pivotal in the construction and durability of these composites. X-ray diffraction examination affirmed the lack of crystallinity in curcumin encapsulated within nanoparticles . The incorporation of κ -carrageenan significantly improved the physicochemical stability of ZLKC nanoparticles in diverse environmental settings. Additionally, ZLKC nanocomposites demonstrated enhanced antioxidant and antimicrobial properties, as well as sustained release characteristics. Therefore, these findings demonstrate the potential application of ZLKC nanocomposites as delivery materials for encapsulating bioactive substances.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）