JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2022
·
IF 10.319
Qin Wang,Yao Tong,Meiting Yang,Hangtao Ye,Xiaojuan Liang,Xin Wang,Weidong Xiang
In the current situation of energy shortages, saving energy and reducing consumption are undoubtedly valid methods to relieve the pressure on resources. CsPb X 3 ( X = Cl, Br, and I) perovskites as star inorganic materials have drawn growing attention owing to their unique properties, making them suitable for applications such as light-emitting diodes (LEDs), solar cells, photodetectors, or lasers. This work presents zinc oxide (ZnO) induced self-crystallized CsPb(Br/I) 3 perovskite with a 26% photoluminescence quantum yield (PLQY) prepared by the traditional melt-quenching method. Furthermore, the full width at half maximum (FWHM) (34–44 nm) can be regulated by the ZnO content. In addition, as a downconverter, CsPb(Br/I) 3 perovskite nanocrystals (NCs) realize a bright red backlight that covers ≈ 94% Rec. 2020 standards in the CIE 1931 color space and 126% of National Television System Committee (NTSC). This finding undoubtedly confirms an effective path for fabricating perovskite materials in a green, low-cost, and time-saving way, enriching the knowledge of glass crystallization mechanisms and promoting their applications in wide color gamut backlights.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Energy Materials
·
2022
·
IF 6.959
Tuo Xin,Yiran Wang,Qiuju Xu,Jiaxiang Shang,Xiangcheng Yuan,Weixing Song,Jinzhang Liu
Rechargeable aqueous zinc-ion batteries (ZIBs) hold great promise for future applications in large-scale energy storage systems. However, the rampant dendrite growth and undesired hydrogen gas evolution over the Zn anode are key issues that make the current ZIB technology immature. Herein, we demonstrate the use of a zeolitic imidazolate framework (ZIF)-derived composite coating on Zn foil for simultaneously suppressing the dendrite growth and H2 evolution when operated in ZnSO4 electrolytes. The polyhedral ZIF-8 granules are converted into mesoporous N-doped carbon (NC) decorated with ZnS nanoparticles, and this ZnS/NC composite is coated onto Zn foil. For comparison, bare Zn anodes and Zn foils coated with other ZIF-derived materials including ZnS nanocrystals and NC frameworks are also used to make half or full cells. The Zn@ZnS/NC anode shows the best performance in terms of superb cycling stability, suppressed dendrite growth, and reduced H2 evolution. At the interface between ZnS/NC coating and Zn foil, confined parasitic reactions result in a layer of an amorphous ZnO nanosheet network, which has a positive effect on reducing water activity. The role of this amorphous ZnO byproduct in reducing H2 evolution is discussed in detail. This work sheds light on a strategy for making practical ZIBs.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROANALYSIS
·
2022
·Vol. 35
·期 1
·e202100703
·
IF 3.077
Xueying Li,Xiaokun Li,Suxiang Feng
In this study, tetracarboxylic manganese phthalocyanine coated nano-zinc oxide (MnC 4 Pc-ZnO) composite material was prepared by in-situ growth method and modified with indium tin oxide (ITO) glass electrode to construct a photoelectrochemical (PEC) sensor. A PEC sensor for the determination of amlodipine besylate (AB) was developed for the first time based on the principle of precipitation reaction between heavy metal ions and dihydropyridine and the recombination suppression effect of the material. The morphology and optical properties of the MnC 4 Pc-ZnO composites were characterized by scanning electron microscopy (SEM) and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS). Chronoamperometry (i-t) and electrochemical impedance spectroscopy (EIS) were used to study the PEC behavior of ITO electrodes modified by MnC 4 Pc-ZnO composite material. The study found that the MnC 4 Pc-ZnO composite material has a good photocurrent response to AB, and there was a good linear relationship between the concentration range of 75 nM-250 μM, the linear equation was I (μA)=−5.2×10 −8 ×lg C +3.2×10 −8 (r=0.9947), a limit of detection (LOD) of 20 nM. In addition, MnC 4 Pc-ZnO/ITO also has good selectivity and stability. The PEC sensor detects amlodipine besylate tablets, amlodipine besylate dispersible tablets, and biological samples, with standard addition recovery rates of 96.11 % and 103.96 %, respectively. The determination result has good accuracy, and the PEC sensor provides a new method for detecting AB.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Magnesium and Alloys
·
2022
·
IF 11.813
Shiquan Jiang,Weidong Li,Jinyu Liu,Jiqiong Jiang,Zhe Zhang,Wei Shang,Ning Peng,Yuqing Wen
A longstanding quest in material science has been the development of superhydrophobic coating based on a single material, without the requirement of fluorination or silane treatment. In this work, the micro-arc oxidation (MAO) coating as transition layer can effectively enhance the bonding force of the superhydrophobic coating. The semiconductor@metal organic frameworks (MOFs) core-shell structure was synthesized by a simple self-templating method, and obtained ZnO@2-methylimidazole zinc salt (ZIF-8) nanorods array on magnesium (Mg) alloy. ZnO nanorods not only act as the template but also provide Zn 2+ for ZIF-8. In addition, we proved that the ligand concentration, synthesis time and temperature are the keys to the preparation of ZnO@ZIF-8 nanorods. As we expect, the ZnO@ZIF-8 nanorods array can trap air in the gaps to form an air layer, and the coating exhibits superhydrophobic properties (154.81°). Excitingly, ZnO@ZIF-8 nanorods array shown a superhydrophobic property, without the requirement of fluorination or silane treatment. The results shown that the coating has good chemical stability and self-cleaning performance. Meanwhile, the corrosion resistance has been significantly improved, R ct was increased from 1.044×10 3 to 1.414×10 6 Ω/cm 2 and I corr was reduced from 4.275×10 −5 to 5.611×10 −9 A/cm 2 . Therefore, the semiconductor@MOFs core-shell structure has broad application prospects in anti-corrosion.
✓ 已验证
产品关联
DOI
高影响因子
JACS Au
·
2022
·
IF 0
Yuhai Sun,Junliang Wu,Yaolin Wang,Jingjing Li,Ni Wang,Jonathan Harding,Shengpeng Mo,Limin Chen,Peirong Chen,Mingli Fu,Daiqi Ye,Jun Huang,Xin Tu
Plasma-catalytic CO2 hydrogenation is a complex chemical process combining plasma-assisted gas-phase and surface reactions. Herein, we investigated CO2 hydrogenation over Pd/ZnO and ZnO in a tubular dielectric barrier discharge (DBD) reactor at ambient pressure. Compared to the CO2 hydrogenation using Plasma Only or Plasma + ZnO, placing Pd/ZnO in the DBD almost doubled the conversion of CO2 (36.7%) and CO yield (35.5%). The reaction pathways in the plasma-enhanced catalytic hydrogenation of CO2 were investigated by in situ Fourier transform infrared (FTIR) spectroscopy using a novel integrated in situ DBD/FTIR gas cell reactor, combined with online mass spectrometry (MS) analysis, kinetic analysis, and emission spectroscopic measurements. In plasma CO2 hydrogenation over Pd/ZnO, the hydrogenation of adsorbed surface CO2 on Pd/ZnO is the dominant reaction route for the enhanced CO2 conversion, which can be ascribed to the generation of a ZnOx overlay as a result of the strong metal–support interactions (SMSI) at the Pd–ZnO interface and the presence of abundant H species at the surface of Pd/ZnO; however, this important surface reaction can be limited in the Plasma + ZnO system due to a lack of active H species present on the ZnO surface and the absence of the SMSI. Instead, CO2 splitting to CO, both in the plasma gas phase and on the surface of ZnO, is believed to make an important contribution to the conversion of CO2 in the Plasma + ZnO system.
✓ 已验证
产品关联
DOI
PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Qinghai Ma,Fang Cui,Jiajia Zhang,Tieyu Cui
Metal oxides are promising electrode candidates for supercapacitor due to their high theoretical capacitance, good reversibility, and low cost. However, they show inferior specific capacitance and power density because of their sluggish ion diffusion kinetics and intrinsically poor electrical conductivity within the solid phase. Herein, heterostructured ZnCo 2 O 4 /ZnO nanobelts are successfully prepared by using self-assembled Zn/Co-based nanosized coordination polymers as the precursors. The resulted nanobelts are composed of uniformly distributed ZnCo 2 O 4 and ZnO nanocrystals, which spontaneously develop built–in electric fields in the nanobelts, and thus improve the conductivity and accelerate charge transport. The as-obtained ZnCo 2 O 4 /ZnO nanobelts display a high specific capacitance of 481.0 F g −1 at 1 A/g. The asymmetric supercapacitor , with a ZnCo 2 O 4 /ZnO positive electrode and an activated carbon negative electrode, deliver an energy of 23.77 Wh kg −1 at the power density of 399.98 W kg −1 and excellent prolonged cycle life. The excellent electrochemical performance benefits from both the special structure and built–in field at the heterostructure interface, which could significantly reduce the ion diffusion resistance and thus promote charge transport. This strategy may blaze a trail for engineering efficient electrode based on earth-abundant materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
LWT-FOOD SCIENCE AND TECHNOLOGY
·
2022
·
IF 6.056
Dong-Dong Zhang,Si Hu,Qiong Wu,Jin-Feng Zhao,Ke-Rui Su,Li-Qin Tan,Xian-Qing Zhou
Zea mays (Maize) is prone to mildew due to its rich nutrition and large embryo, resulting in the decline of edible quality, germination rate and even threatening people's health. In this study, ZnO nanoparticles were prepared by hydrothermal method to inhibit the growth of microorganisms on the surface of Zea mays . For its safe and efficient application, mesoporous silica (mSiO 2 ) was modified on its surface and successfully prepared ZnO@mSiO 2 Nanocomposites. The ZnO@mSiO 2 nanocomposites were successfully prepared and characterized by TEM, EDS, XRD, FT-IR, and it could significantly inhibit two model bacteria and three model fungi. After mixing with Zea mays and 42 days of simulated storage, they could significantly inhibit the growth of microorganisms in Zea mays , ensure the stability of Zea mays quality and improve the germination rate of Zea mays . The ZnO@mSiO 2 nanocomposites prepared in this study provide a new idea for the safe storage of Zea mays .
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2022
·
IF 9.221
Lili Sun,Yun Guo,Yanchao Liu,Ronghua Ni,Gang Chen,Xiaoshun Wei,Zebin An,Zheng Jiao
Modification of traditional metal oxides to prepare gas sensors with excellent response and high selectivity for monitoring air pollution, is a pivotal indicator for the development of gas sensing technologies. In this research, the core-shell Tourmaline@ZnO/MWCNT micro-nanostructured composite was successfully constructed and prepared by the uniform co-precipitation and hydrothermal methods , which effectively achieved the high sensitivity to n-butanol. The structure, morphology and surface electron valence state were characterized by employing important analytical techniques. With tourmaline as the inner-core and MWCNT-interspersed ZnO nanosheets as the outer-shell, the uniquely hierarchical micro-nanostructure covered a larger specific surface area, which provided more active sites during the reaction. Meanwhile, the performance assessments demonstrated that the proposed micro-nano structure exhibited exceptional gas-sensing properties, while Tourmaline@ZnO/ 0.9%MWCNT sensor reaching the highest response value to 185.8–100 ppm n-butanol far exceeding other detected gases, additionally with a faster response-recovery time. The presence of tourmaline and the interspersion of MWCNT played a synergistic effect on the enhancement of the properties for ZnO-based gas sensors, which brought about a beneficial impact on the carrier transport. This technical strategy should be of certain significance in the intelligent preparation and extensive application of high-performance sensing devices in the future.
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CHEMICAL ENGINEERING
·
2022
·
IF 3.898
Zhengchi Yin,Xiaoke Wu,Yanwei Yang,Huayu Zhang,Wangtao Li,Ruimin Zhu,Qiancheng Zheng,Zhengbao Wang
Compared to inorganic supports, polymeric supports can offer additional benefits, e.g. , easier processing and cheaper. However, the organic surface has weak adhesion to the zeolitic imidazolate frameworks (ZIFs) membrane layer, which usually requires complex surface modification or seeding. Herein, we demonstrate that a dual-layer asymmetric polymer support prepared by a simple spinning process is a good candidate for the preparation of ZIF-8 membrane. The inner layer of the support is an organic hollow fiber (PES) with finger-like pores, and the outer layer is a ZnO-PES composite layer with finger-like pores also. The ZnO-PES composite layer is expected to contain uniform ZnO crystals in the polymer matrix, i.e ., the ZnO particles in the skin layer of the support are not easy to fall off. Under the induction of ZnO particles in the outer layers, continuous ZIF-8 membranes can be prepared by single in-situ crystallization, showing good adhesion to the supports. The obtained ZIF-8 membranes show a H 2 permeance of 8.7 × 10 −8 mol·m −2 ·s −1 ·Pa −1 with a H 2 /N 2 ideal separation selectivity of 18.0. The design and preparation of this dual-layer polymer support is expected to promote the large-scale application of MOF membranes on polymer supports.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2021
·
IF 8.742
Yilin Wang,Senqing Fan,Zeyi Xiao,Zenghui Mai,Ke Bai,Jiaojiao Chen,Yu Chen,Jingyun Liu
A catalytic membrane nano reactor (CMNR) with deep-permeation nanocomposite structure (DPNS) has been fabricated by flowing synthesis for methanol dehydrogenation to formaldehyde. In this structure, Cu/ZnO nanoparticles are in situ immobilized in the pores of Ti membrane substrate with thickness 1 mm, pore size 10 μm and porosity 45%. The characterization by XRD , TGA , XPS, SEM and TEM indicates that the Cu/ZnO nanoparticles with mean size of 82 nm was successfully embedded into the membrane pores, and well distributed along the thickness direction of the membrane. The ICP measurement results demonstrate that the immobilization amount of 20 mg of Cu/ZnO nanoparticles per gram of Ti membrane substrate can be obtained. The prepared Cu/ZnO/Ti CMNR was built in the technological apparatus for catalytic dehydrogenation of methanol. For one sheet of membrane setting up, the conversion efficiency of methanol 7.5%, the mass specific activity 183 mmol MeOH ·h -1 ·g cat -1 , the pressure drop 2.7 kPa with gas permeating the membrane have been measured, under mass ratio of Cu to ZnO 0.05 in the membrane, reaction temperature 360 °C, the gas flux 8 m 3 ·m -2 ·h -1 through the membrane. The selectivity of formaldehyde is up to 98% and increases with increasing reaction temperature, the highest mass specific activity of 318 mmol MeOH ·h -1 ·g cat -1 can be achieved with mass ratio of Cu to ZnO 0.12 at 360 °C. For three sheets of CMNRs setting up in serials, over 18% of conversion efficiency has been achieved with gas pressure drop 6.8 kPa. If 70 sheets of CMNRs are packed in serials to build a reactor with 70 mm thickness, which will produce the gas pressure drop 162 kPa, the conversion efficiency of 99% would be expected according to a simple simulation based on the experimental measurement.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NON-CRYSTALLINE SOLIDS
·
2021
·
IF 3.531
Xiyang He,Wencai Cheng,Meng Yan,Wanrong Song,Yi Liu,Zhentao Zhang,Tao Ma,Weizhen Liu,Xirui Lu
As to spent fuel reprocessing in the nuclear industry, disposal of iodine-containing silver silica gel (AgIs) is a challenge. Method for immobilizing AgIs with the B-Bi-Zn glass powder at low temperatures has been applied to cope with this dilemma. In ingredient analysis, only diffraction peak of AgI can be detected in the sintered samples. In addition, the element analysis confirmed the existence and distribution of AgI in the solidified matrix. According to leaching experiment, low leaching rate (10 −6 ) demonstrated that the sintered body possessed good chemical stability in liquid circumstance. Based on the research statistics, quality loss ratio of sample (98.58 g) sintered at 600 °C under the gas pressure sintering was merely 1.61%. Meanwhile, the quality retention proportions of AgI and raw powder from thermogravimetric analysis were certified as 98.09% and 96.19% respectively at 600 °C. Therefore, this study comprehensively proved the glass powder curing prospective for AgIs disposal.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2021
·
IF 6.707
Wei She,Jing Wang,Xuewei Li,Jingfang Li,Guijie Mao,Weizuo Li,Guangming Li
Tuning of the metal–metal/oxide interaction is a vital route to enhance the performance of the supported catalysts. In this study, a Cu/Zn bimetallic MOFs was synthesized through a simple solvothermal method by using an adenine rigid biomolecule acted as organic linker. Furthermore, a ZnO/nitrogen-doped carbon composite supported Cu catalyst (named as Cu-ZnO/NC-BMOFs) derived from the bimetallic CuZn-MOFs was obtained via one-pot pyrolysis method. The developed Cu-ZnO/NC-BMOFs catalyst was tested for hydrogenation-amination tandem reaction. The bimetallic CuZn-MOFs with the uniformly dispersed Cu and Zn centers acted as a self-sacrificing template, which could facilitate the derived catalyst with strengthened Cu-ZnO interaction, high dispersity, and more N species. All of these advantages give the developed Cu-ZnO/NC-BMOFs catalyst with higher performance in hydrogenation-amination tandem reaction compared with traditional Cu/ZnO/NC-IWI (synthesized by incipient wetness impregnation) catalyst. The Cu-ZnO/NC-BMOFs exhibits good stability for the recycling experiments with a negligible loss in its performance. More importantly, the Cu-ZnO/NC-BMOFs catalyst could convert nitroarenes into the corresponding imines or secondary amines with excellent selectivity (>90.0%). This bimetallic MOFs-derived strategy may provide a way for fabricating NC supported catalysts in other tandem reactions.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）