Frontiers in Plant Science
·
2021
·
IF 5.754
Hua Huang,Ling Wang,Diyang Qiu,Nan Zhang,Fangcheng Bi
The plant cuticle covers almost all the outermost surface of aerial plant organs, which play a primary function in limiting water loss and responding to the environmental interactions. Banana fruit is susceptible to thermal changes with chilling injury below 13°C and green ripening over 25°C. Herein, the changes of surface morphology, chemical compositions of cuticle, and the relative expression of cuticle biosynthesis genes in banana fruit under low-temperature storage were investigated. Banana fruit exhibited chilling injury rapidly with browned peel appearance stored at 4°C for 6 days. The surface altered apparently from the clear plateau with micro-crystals to smooth appearance. As compared to normal ones, the overall coverage of the main cuticle pattern of waxes and cutin monomers increased about 22% and 35%, respectively, in browned banana stored under low temperature at 6 days. Fatty acids (C 16 –C 18 ) and ω-OH, mid-chain-epoxy fatty acids (C 18 ) dominated cutin monomers. The monomers of fatty acids, the low abundant ω, mid-chain-diOH fatty acids, and 2-hydroxy fatty acids increased remarkably under low temperature. The cuticular waxes were dominated by fatty acids (> C 19 ), n -alkanes, and triterpenoids; and the fatty acids and aldehydes were shifted to increase accompanied by the chilling injury. Furthermore, RNA-seq highlighted 111 cuticle-related genes involved in fatty acid elongation, biosynthesis of very-long-chain (VLC) aliphatics, triterpenoids, and cutin monomers, and lipid-transfer proteins were significantly differentially regulated by low temperature in banana. Results obtained indicate that the cuticle covering on the fruit surface was also involved to respond to the chilling injury of banana fruit after harvest. These findings provide useful insights to link the cuticle on the basis of morphology, chemical composition changes, and their biosynthesis regulations in response to the thermal stress of fruit during storage.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Ze Fang,Nan Li,Zhiguo Zhao,Zhexin Zhu,Wangyang Lu,Fengtao Chen,Junjie Wang,Wenxing Chen
Developing efficient and environmentally friendly catalytic system is significant for the removal of sulfide in fuel. O-bridged diiron perfluorophthalocyanine/4-mercaptopyridine (FePcF 16 -O-FePcF 16 /4-Mpy) as a novel composite catalyst was designed and prepared by axial coordination. The catalyst characterization was conducted through ultraviolet–visible spectroscopy, fourier transform infrared spectroscopy, X-ray diffractometry, electrospray ionization–mass spectrometry and density-functional theory technology. A high-efficient extraction oxidative desulfurization system is composed of hydrogen peroxide (H 2 O 2 ), the mixture of ethanol and water and FePcF 16 -O-FePcF 16 /4-Mpy. Notably, the coordination of 4-Mpy greatly enhanced the catalytic activity of FePcF 16 -O-FePcF 16 , 99.4% of the desulfurization rate was achieved in 20 min at 30 °C. The catalyst system was cycled 8 times without significantly reducing the removal of dibenzothiophene. Electron paramagnetic resonance and gas chromatography–mass spectroscopy proved the high-valent iron-oxo intermediates were the main active substances in the FePcF 16 -O-FePcF 16 /4-Mpy/H 2 O 2 system, and the pathway of catalytic oxidation DBT was proposed. This work provided useful insights to select suitable ligands to improve the activity of metal phthalocyanine, and offered a novel idea for the construction of efficient oxidative desulfurization system.
✓ 已验证
产品关联
DOI
高影响因子
Gels
·
2021
·Vol. 7
·期 4
·210
·
IF 4.702
Shixian Xiong,Yangbiao Hu,Sizhao Zhang,Yunyun Xiao,Zhengquan Li
Cellulose and its derivative aerogels have attracted much attention due to their renewable and biodegradable properties. However, the significant shrinkage in the supercritical drying process causes the relatively high thermal conductivity and low mechanical property of cellulose and its derivatives aerogels. Considering the pearl-necklace-like skeleton network of silica aerogels, which can improve thermal insulation property and mechanical property. Herein, we propose a new strategy for fabricating cellulose diacetate aerogels (CDAAs) with pearl-necklace-like skeletons by using tert-butanol (TBA) as exchange solvent after experiencing the freezing-drying course. CDAAs obtained have the low density of 0.09 g cm−3, the nanopore size in the range of 10–40 nm, the low thermal conductivity of 0.024 W m−1K−1at ambient conditions, and the excellent mechanical properties (0.18 MPa at 3% strain, 0.38 MPa at 5% strain). Ultimately, CDAAs with moderate mechanical property paralleled to cellulose-derived aerogels obtained from supercritical drying process are produced, only simultaneously owning the radial shrinkage of 6.2%. The facile method for fabricating CDAAs could provide a new reference for constructing cellulose/cellulose-derived aerogels and other biomass aerogels.Keywords:cellulose diacetate;aerogels;freezing drying;pearl-necklace-like skeletons
✓ 已验证
产品关联
DOI
PubMed
高影响因子
International Journal of Polymer Science
·
2021
·
IF 2.642
Jianye Wang,Zhu Wang,Haifeng Liu,Song Wang,Yifeng Sun
Na2CO3 was loaded onto waste carbide slag (CS) by impregnation-calcination method to prepare the solid base catalyst, which was used to synthesize glycerol carbonate (GC) by the transesterification of glycerol with dimethyl carbonate (DMC). The prepared catalysts were characterized by a scanning electron microscope (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and Brunner−Emmet−Teller (BET) techniques. The catalyst 15 wt.% Na2CO3-CS-800, which was prepared by impregnating CS to the Na2CO3 solution with the concentration of 15 wt.% weight of CS and calcined at 800°C for 3 hours, showed an excellent catalytic ability. When it was applied in the catalytic synthesis of GC, 98.1% glycerol conversion and 96.0% GC yield were achieved in 90 mins at 75°C with the catalyst dosage of 3 wt.% to total reactants and the DMC to glycerol molar ratio of 5. More importantly, the loading of Na2CO3 can effectively improve the reusability of catalyst. The 15 wt.% Na2CO3-CS-800 can still achieve 83.6% glycerol conversion and 80.5% GC yield after five-time reuse. Meanwhile, under the same reaction conditions, the CS-800, which was obtained by calcining CS at 800°C for 3 hours, experienced significant activity reduction with only 15.2% glycerol conversion and 14.1% GC yield after five-time reuse. FTIR and XRD characterization revealed that CO32- might play a key role in preserving active catalytic CaO component by forming protective CaCO3 shell on the catalyst surface.
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2021
·
IF 5.455
Linjie Guan,Chengming Huang,Dingmei Han,Linhua Zhu,Yi Mei,Dedong He,Yun Zu
Three zeolites ZSM-5, ZSM-35 and ZSM-22 are applied in n -butane cracking to reveal the influence of regional differences in Brønsted acid sites on reaction pathways. The Brønsted acid sites located in the channels of ZSM-5 exhibit a higher catalytic activity and yields to light olefins (especially the ethylene), which can be attributed to more relative contribution of bimolecular pathway. In comparison, more Brønsted acid sites are situated on the external surface or micropore mouths of ZSM-35 and ZSM-22, which are beneficial to propylene production. Note-worthily, almost no propane production on the two zeolites implies the predomination of monomolecular pathway. In situ FTIR technique further discloses that the difference in the reaction pathways is tailored by adsorption configurations of n -butane at two types of Brønsted acid sites. Under comparable conditions, the ZSM-5 performs a relatively good catalytic stability through bimolecular pathway. Furthermore, the correlation between deactivation rate and light olefins reveals that the enhancement of propylene selectivity accelerates the deactivation of ZSM-35 and ZSM-22. While, promotion on the ethylene selectivity is a significant inducement for the deactivation of ZSM-5.
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2023
·Vol. 29
·期 1
·171
·
IF 4.6
Wenjie Li,Shenghui Hao,Hengyang Li,Qi An,Lina Yang,Bing Guo,Zijing Xue,Yongli Liu,Long Guo,Yuguang Zheng,Dan Zhang
Metabolic product accumulation exhibited variations among mulberry (Morus albaL.) leaves (MLs) at distinct growth stages, and this assessment was conducted using a combination of analytical techniques including high-performance liquid chromatography (HPLC), gas chromatography–mass spectrometry (GC-MS), and liquid chromatography–mass spectrometry (LC-MS). Multivariate analysis was applied to the data, and the findings were correlated with antioxidant activity and α-glucosidase inhibitory effects in vitro. Statistical analyses divided the 27 batches of MLs at different growth stages into three distinct groups. In vitro assays for antioxidant activity and α-glucosidase inhibition revealed that IC50values were highest at the Y23 stage, which corresponds to the ‘Frost Descends’ solar term. In summary, the results of this study indicate that MLs at different growth stages throughout the year can be categorized into three primary growth stages using traditional Chinese solar terms as reference points, based on the observed variations in metabolite content.Keywords:Morus albaL.;primary metabolites;secondary metabolites;different growth stages;antioxidant activity
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2023
·Vol. 14
·期 1
·1-10
·
IF 16.6
Xue Tiantian,Zhu Chenyu,Yu Dingyi,Zhang Xu,Lai Feili,Zhang Longsheng,Zhang Chao,Fan Wei,Liu Tianxi
Polyimide aerogel fibers hold promise for intelligent thermal management fabrics, but their scalable production faces challenges due to the sluggish gelation kinetics and the weak backbone strength. Herein, a strategy is developed for fast and scalable fabrication of crosslinked polyimide (CPI) aerogel fibers by wet-spinning and ambient pressure drying via UV-enhanced dynamic gelation strategy. This strategy enables fast sol-gel transition of photosensitive polyimide, resulting in a strongly-crosslinked gel skeleton that effectively maintains the fiber shape and porous nanostructure. Continuous production of CPI aerogel fibers (length of hundreds of meters) with high specific modulus (390.9 kN m kg −1 ) can be achieved within 7 h, more efficiently than previous methods (>48 h). Moreover, the CPI aerogel fabric demonstrates almost the same thermal insulating performance as down, but is about 1/8 the thickness of down. The strategy opens a promisingly wide-space for fast and scalable fabrication of ultrathin fabrics for personal thermal management.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DESIGNED MONOMERS AND POLYMERS
·
2019
·
IF 1.528
Meng-Di Chen,Guo Zhang,Shi-Chang Chen,Xian-Ming Zhang,Wen-Xing Chen
In this study, 9-anthracenemethyl methacrylate (AMMA) and styrene (St) as monomers and benzoyl peroxide as an initiator were used to synthesize P(St-co-AMMA), a macromolecule tracer with a fluorescence effect, via free radical copolymerization. A fluorescent online detection device was built on the basis of the principle of fluorescence online detection by using the single-screw extrusion platform of a torque rheometer to explore the effect of the amount of macromolecular tracer and screw speed on the residence time distribution of polystyrene in single-screw extrusion. Fourier transform infrared spectroscopy, 1H-NMR, thermal stability, fluorescence properties, and rheological properties show that the resulting product P(St-co-AMMA) has a degree of thermal stability, fluorescence, and rheological properties similar to polystyrene, so this product can be used to characterize the residence time distribution during single-screw extrusion. The amount of macromolecular tracer P(St-co-AMMA) does not affect the residence time distribution of polystyrene during single-screw extrusion processing, meanwhile, the minimum residence time decreases and the residence time distribution becomes narrow as the screw speed increases, that is, the axial mixing capacity of the single-screw extruder decreases as the screw speed increases.
研究领域:
高分子化学
·
材料科学
·
聚合物加工工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
LWT-FOOD SCIENCE AND TECHNOLOGY
·
2022
·
IF 6.056
Jiang Jikang,Li Wenxiang,Yu Shuping
To investigate the effects of inoculating Leuconostoc mesenteroides or Lactiplantibacillus planetarium on the changes in metabolites in Pleurotus eryngii Jiaosu, a fermented plant extract rich in nutrients and bioactive compounds, the physicochemical and metabolite features of the treated Jiaosu were compared to those of spontaneously-fermented Jiaosu. The physicochemical features of Jiaosu fermented with Leuconostoc mesenteroides or Lactiplantibacillus planetarium were superior to spontaneously-fermented Jiaosu. An Partial Least Squares Discrimination Analysis (PLS-DA) score plot showed a clear difference in metabolites between spontaneous fermentation group (SFG) and inoculated Lactiplantibacillus planetarium group (LPG). Metabolites were remarkably different between LPG and SFG on the first day of fermentation. The differential metabolites included sugars, acids and alcohols. This study highlights the applicability of GC-MS based metabolomics as a tool to monitor Jiaosu fermentation.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL BIOCHEMISTRY
·
2022
·
IF 3.191
Dongning Zhang,Bailu Duan,Li Sun,Yanfen Duan,Sili Zheng,Jingjing Li,Hailong Yin,Dandan Mu,Shuaihong Hou,Guoyan Mo,Lintao Han,Fang Huang,Qiang Yin
For many years, Shiliu Buxue Syrup (SLBXS) has been used in the treatment of anemia in Xinjiang, China. However, the potential therapeutic mechanism of SLBXS in the treatment of anemia remains unclear. We qualitatively analyzed the ingredients of SLBXS and predicted the underlying mechanisms by network pharmacology. A mice model of anemia was established by subcutaneous injection of 1-Acetyl-2-phenylhydrazine (APH). Spleen metabolomics was performed to screen potential biomarkers and pathways related to anemia. Furthermore, core targets of crucial pathways were experimentally validated. Finally, molecular docking was used for predicting interactions between compositions and targets. Network pharmacology indicated that the 230 SLBXS ingredients may affect 141 target proteins to regulate the PI3K/AKT and HIF-1 signaling pathways. Metabolomics revealed that SLBXS could mediate 30 biomarkers, such as phosphoric acid, l -pyroglutamic acid, alpha-Tocopherol, 1-stearoyl-rac-glycerol, and dihydroxyacetone phosphate, to regulate drug metabolism-other enzymes, glutathione metabolism, glycolysis or gluconeogenesis, nicotinate and nicotinamide metabolism, nitrogen metabolism, and purine metabolism. Western blot indicated that SLBXS can regulate the protein expression levels of AKT1, Bcl2, Caspase3, HIF-1α, VEGF-A, and NOS2. The molecular docking revealed that most of the compositions had a good binding ability to the core targets. Based on these findings, we speculate that SLBXS treats anemia mainly by modulating the PI3K/AKT and HIF-1 pathways and glutathione and glycolytic metabolisms.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Biomaterials Science & Engineering
·
2022
·
IF 5.395
Yan Wang,Shuhui Gao,Kongying Zhu,Lixia Ren,Xiaoyan Yuan
Cryopreservation of red blood cells (RBCs) is imperative for transfusion therapy, while cryoprotectants are essential to protect RBCs from cryoinjury under freezing temperatures. Trehalose has been considered as a biocompatible cryoprotectant that naturally accumulates in organisms to tolerate anhydrobiosis and cryobiosis. Herein, we report a feasible protocol that enables glycerol-free cryopreservation of human RBCs by integration of the synthesized trehalose lipids and dissociative trehalose through ice tuning and membrane stabilization. Typically, in comparison with sucrose monolaurate or trehalose only, trehalose monolaurate was able to protect cell membranes against freeze stress, achieving 96.9 ± 2.0% cryosurvival after incubation and cryopreservation of human RBCs with 0.8 M trehalose. Moreover, there were slight changes in cell morphology and cell functions. It was further confirmed by isothermal titration calorimetry and osmotic fragility tests that the moderate membrane-binding activity of trehalose lipids exerted cell stabilization for high cryosurvival. The aforementioned study is likely to provide an alternative way for glycerol-free cryopreservation of human RBCs and other types of cells.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Polymers
·
2023
·Vol. 15
·期 22
·4363
·
IF 5
Bai Han,Jinghui Dai,Wanliang Zhao,Wei Song,Zhi Sun,Xuan Wang
Nanocomposite doping is an effective method to improve the dielectric properties of polyethylene. Meanwhile, the introduction of thermal conductivity groups in crosslinked polyethylene (XLPE) is also an effective way to improve the thermal conductivity. Nano-zeolite is an inorganic material with a porous structure that can be doped into polyethylene to improve the insulation performance. In this paper, hyperbranched polyarylamide (HBP) with a high thermal conductivity and an auxiliary crosslinking agent (TAIC) was grafted on the surface of ZSM-5 nano-zeolite successively to obtain functionalized nano-zeolite (TAICS-ZSM-5-HBP) (the “S” in TAICS means plural). The prepared functionalized nano-zeolite was doped in polyethylene and grafted under a thermal crosslinking reaction to prepare nanocomposites (XLPE/TAICS-ZSM-5-HBP). The structural characterization showed that the nanocomposite was successfully prepared and that the nanoparticles were uniformly dispersed in the polyethylene matrix. The space charge of the TAICS-ZSM-5-HBP 5wt% nanocomposite under a high electric field was obviously inhibited. The space charge short-circuit test showed that the porous structure of the nano-zeolite introduced more deep traps, which made the trapped charge difficult to break off, hindering the charge injection. The introduction of TAICS-ZSM-5-HBP particles can greatly improve the thermal conductivity of nanocomposites. The thermal conductivity of the XLPE/5wt% and XLPE/7wt% TAICS-ZSM-5-HBP nanocomposites increased by 42.21% and 69.59% compared to that of XLPE at 20 °C, and by 34.27% and 62.83% at 80 °C.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）