JOURNAL OF ORGANIC CHEMISTRY
·
2024
·
IF 3.3
Nan Wang,Yuanyuan Huang,You Zi,Mengke Wang,Weichun Huang
A practical and regioselective direct N-alkylation of 2-pyridones is enabled by use of α-keto esters in the P(NMe2)3-mediated deoxygenation process. The reaction proceeds under mild conditions to produce N-alkylated 2-pyridones with high selectivity and generality, and the protocol is shown to be applicable for the scale-up synthesis, which makes it promising for practical applications.
研究领域:
有机化学
·
合成化学
✓ 已验证
DOI
PubMed
高影响因子
ENERGY & FUELS
·
2024
·
IF 5.2
Yinhui Feng,Zhaoguo Liu,Rixin Liu,Shuqi Kang,Shuyuan Zhang,Xin Guo,Shiyong Chu,Shaohua Guo
Layered transition-metal oxides are recognized for their substantial potential as cathode materials for sodium-ion batteries (SIBs), particularly in the context of large-scale energy storage systems. O′3-NaMnO2 (NMO) has received considerable attention due to its cost-effectiveness, high capacity, and adequate initial sodium content. However, its practical application is hindered by issues, such as Jahn–Teller distortion and the migration of Mn during cycling, which result in severe irreversible phase transitions and structural collapse. In this study, the entropy strategy was employed to synthesize O′3-NaMn0.8Mg0.06Ti0.06Fe0.04Al0.04O2 (NMO-MTFA), which not only stabilized the crystal structure but also enhanced both the bulk and surface/interface kinetics. NMO-MTFA delivers a high initial discharge capacity of 190 mA h g–1 and demonstrates a superior cycling performance and rate capability. The stabilization of the crystal structure is further reinforced by the strengthened Mn–O interaction, achieved through the trace doping of multiple elements. This research underscores the efficacy of the entropy strategy in optimizing the performance of layered oxide cathodes, thereby presenting a novel approach for the design of high-performance SIBs.
研究领域:
材料科学
·
电化学
·
能量存储
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2020
·
IF 3.807
Zhaohong Su,Daili Tang,Junjie Liu,Xiaolan Yang,Siyu Xu,Wenjing Xu,Yuqing Zhou,Mingyang Xu,Jianlong Yi,Hongmei Jiang,Yuanhua Shao,Xiaoli Qin
A simple and rapid electrochemical synthesis strategy for in-situ fabrication of toluidine blue (TB)-functionalized metal organic framework (TB@MOFs) thin films via one-step reduction approach was reported. The TB@MOFs thin layer has been synthesized on the working electrode surface in different times at room temperature , and its morphology and thickness was characterized by varied instruments, including scanning electron microscope, transmission electron microscope, and scanning ion conductance microscope. The prepared TB@MOFs shows exceptional electrochemical activity and stability under mild conditions, and its electrochemical response is dependent on the amount of TB molecules which are encapsulated in the MOFs. Based on the TB@MOFs sensing platform, a sensitive label-free electrochemical immunosensor for the detection of Indole-3-acetic acid (IAA, a plant hormone) was developed with a wide linear range (2.5 pg mL −1 - 5 ng mL −1 ) and a low detection limit (1.4 pg mL −1 ). Moreover, this immune sensor shows good sensitivity and selectivity in real samples for IAA detection.
研究领域:
分析化学
·
植物学
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2018
·Vol. 6
·期 46
·23357-23365
·
IF 9.931
Anyu Su,Qiang Pang,Xin Chen,Jiajun Dong,Yingying Zhao,Ruqian Lian,Dong Zhang,Bingbing Liu,Gang Chen,Yingjin Wei
Li3V2(PO4)3 (LVP) has been highlighted as a promising cathode material for lithium ion batteries, but it suffers from poor rate capability and rapid capacity decay due to sluggish electrode kinetics and vigorous electrode/electrolyte side reactions at high voltage. In this study, an inexpensive aqueous lithium poly-acrylic acid (LiPAA) binder was developed to deftly solve the shortcomings of the LVP material by tailoring the functional groups in the binder. The good adhesion and cohesion properties of the LiPAA binder ensured a close linkage between the active LVP particles, conductive additives and current collector, which formed a stable and conductive network in the electrode. In addition, the reversible H+/Li+ exchange in LiPAA effectively assisted the transport of Li+ ions at the electrode interface, which allowed the establishment of a Li+ conductive pathway without considerable degradation of the electrolyte. Due to these advantages, the LVP electrode containing the LiPAA binder exhibited significantly improved electrochemical performance compared to the electrode that employed the traditional polyvinylidene fluoride binder. The new electrode configuration showed a large specific capacity of 107 mA h g−1 at 70C rate and a high capacity retention of 91% was obtained after 1400 cycles at 10C rate, showcasing the great potential of this aqueous binder in lithium ion batteries.
研究领域:
材料科学
·
能源存储技术
✓ 已验证
DOI
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 31
·10918-10926
·
IF 4
Yu Zhang,Xia Liu,Qian-Yan Liu,Jian-Hua Wang,Ting Hu,Yan-Mei Lin,Jian-Han Zhang
Two novel alkaline-earth zincophosphites, namely CaZn(HPO3)2 and Ba2Zn(HPO3)3, were successfully synthesized under hydrothermal conditions. CaZn(HPO3)2 exhibits a three-dimensional (3D) anionic framework with a 6-connected uni-nodal pcu α-Po primitive cubic topology, constructed by unique Zn2O8 dimers and HPO3 pseudo-tetrahedra, while Ba2Zn(HPO3)3 displays one-dimensional (1D) [Zn(HPO3)3]4− anionic chains. It is worth mentioning that CaZn(HPO3)2 represents the first example of an alkaline-earth zincophosphite compound with a 3D framework structure. Our research also revealed the importance of both alkaline earth cation sizes and Zn/P ratios in anionic open-framework formation. The crystal structures of both compounds were further verified by energy dispersive spectroscopy, IR spectroscopy and Raman spectroscopy. Optical diffuse reflectance spectra, coupled with Tauc's fitting, revealed direct bandgaps with energy values of 4.33 and 4.48 eV for CaZn(HPO3)2 and Ba2Zn(HPO3)3, respectively, which differ from the prediction of theoretical calculations. Density of states calculations were conducted to reveal the origin of the bandgaps and bond interactions. Both compounds exhibited moderate birefringence values. This work may have implications for the design and synthesis of novel metal phosphites with desired properties.
研究领域:
无机化学
·
材料科学
·
固体化学
✓ 已验证
DOI
PubMed
高影响因子
AQUATIC TOXICOLOGY
·
2024
·
IF 4.1
Yonghua Wang,Yujia Shang,Xiaodan Liu,Xi Chen,Guanhua Xu,Guanghua Lu
Benzophenone-3 (BP-3) is a commonly used ultraviolet absorber that has the potential to accumulate in organisms, leading to toxicity. Benzophenone-8 (BP-8) is one of the major metabolites of BP-3. In this study, zebrafish were exposed to different concentrations of BP-3 and BP-8 (1 μg/L, 30 μg/L, and 300 μg/L) to investigate their accumulation and toxic effects in various tissues, including zebrafish brain, gut, and liver. The analysis focused on neurotoxicity, oxidative damage, inflammation, and gene expressions. The results showed that both BP-3 and BP-8 accumulated in the tissues, with the highest concentration observed in the gut, followed by the liver and brain. BP-8 exhibited a stronger ability to accumulate. In the brain, exposure to 1 μg/L of BP-3 and BP-8 promoted cortisol production, while higher exposures (30 μg/L and 300 μg/L) inhibited acetylcholinesterase activity and suppressed cortisol production. In the gut, both BP-3 and BP-8 exposures disrupted oxidative stress, inflammatory immunity, and apoptosis functions. In the liver, BP-3 and BP-8 affected hepatic metabolism, oxidative stress, apoptosis, and inflammatory immunity. Comparing gene expression in the brain, gut, and liver, it was found that BP-3 and BP-8 had a lower effect on gene expression in the brain, while the effect on the gut and liver was significantly higher. BP-8 generally had a higher effect than BP-3, which aligns with the observed accumulation pattern. These findings provide valuable insights for the risk assessment of BP-3 and BP-8 in the aquatic environment.
研究领域:
环境毒理学
·
水生毒理学
·
分子生物学
·
生物化学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2021
·
IF 4.527
Yuansong Luo,Han Gao,Xiujian Zhao
The NASICON-type Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP) is considered to be one of the most promising solid electrolytes because of its excellent chemical stability against moisture and considerable total ionic conductivity . Nevertheless, the poor sinterability and low grain boundary ionic conductivity of LATP limit its practical commercial applications. Herein, Li 2 CO 3 ·Bi 2 O 3 (abbreviated as LB), as a sintering aid, was introduced into LATP to improve its sinterability and ionic conductivity. It was demonstrated that the addition of LB promoted the liquid phase sintering of LATP by forming the secondary phases with a low melting point, thereby promoting the growth of grains and making the contact between the grains closer. With the help of LB, the sintering temperature of LATP was reduced to about 900 °C. A series of comparative investigations indicated that the LATP-2LB ceramic pellets sintered at 900 °C exhibited the highest total ionic conductivity of 0.673 mS/cm. Meanwhile, the relative density and grain boundary ionic conductivity of LATP-2LB ceramic pellets sintered at 900 °C reached 95.28% and 3.835 mS/cm, respectively, which is much higher than 77.16% and 0.264 mS/cm of LATP-0LB ceramic pellets sintered at the same temperature. Obviously, LB can effectively improve the sinterability of LATP while increasing its ionic conductivity, providing a new strategy for preparing LATP ceramics with excellent properties.
研究领域:
材料科学
·
电化学
·
固体化学
✓ 已验证
DOI
高影响因子
MACROMOLECULAR RESEARCH
·
2019
·Vol. 28
·期 1
·74-81
·
IF 1.758
Wang Yuting,You Sijia,Hu Jie,Zhang Kan
Two 3-methytetrahydrophtalimide-functional benzoxazine monomers containing nitrile group have been prepared in order to achieve the basic design rules for developing high-performance thermosets via multifunctional benzoxazines. The chemical structures of the two new synthesized benzoxazine monomers have been confirmed by 1 H NMR, 13 C NMR and FT-IR. Besides, the polymerization behavior has been studied by using DSC and in situ FT-IR. In addition, the thermal stability and flame retardant properties of the resulting polybenzoxazines have also been investigated using TGA and MCC. The polybenzoxazine based on ortho -3-methytetrahydrophtalimide functional benzoxazine containing ortho -nitrile group exhibits excellent thermal stability and low flammability, with a T d 10 of 378 °C and a HRC value of 180 J/(g K).
研究领域:
材料科学
·
高分子化学
✓ 已验证
DOI
高影响因子
International Journal of Environmental Research and Public Health
·
2016
·Vol. 13
·期 9
·925
·
IF 2.035
Hong-Qin Sun,Yang Du,Zi-Yang Zhang,Wen-Jing Jiang,Yan-Min Guo,Xi-Wu Lu,Yi-Min Zhang,Li-Wei Sun
Benzophenone (BP) andN,N-diethyl-3-methylbenzamide (DEET) are two chemicals often used in personal care products (PCPs). There is a lack of systematic ecotoxicological evaluations about the two chemicals to aquatic organisms. In the present study, the acute toxic effects onChlorella vulgaris,Daphnia Magana, andBrachydanio reriowere tested and the ecotoxicological risks were evaluated. For BP, the 96-h half-maximal effective concentration (EC50) onC. vulgariswas 6.86 mg/L; the 24-h median lethal concentration (LC50) onD. maganawas 7.63 mg/L; the 96-h LC50onB. reriowas 14.73 mg/L. For DEET, those were 270.72 mg/L, 40.74 mg/L, and 109.67 mg/L, respectively. The mixture toxicity of BP and DEET, onC. vulgaris,D. magana, andB. rerioall showed an additive effect. The induced predicted no-effect concentrations (PNECs) for BP and DEET by assessment factor (AF) method are 0.003 mg/L and 0.407 mg/L, respectively. Both are lower than the concentrations detected from environment at present, verifying that BP and DEET are low-risk chemicals to the environment.
研究领域:
环境科学
·
毒理学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 86
·83288-83295
·
IF 3.289
Chongmin Liu,Shuai Liu,Pingxiao Wu,Yaping Dai,Lytuong Tran,Nengwu Zhu,Chuling Guo,Ihsanullah Sohoo
Modified calcium saturated montmorillonite (Mt) was prepared at different 3-aminopropyltriethoxysilane (APTES) loadings through grafting. The as-products were characterized by XRD, FTIR and elemental analysis. Surface analysis such as acidity was examined at different H+ concentrations, showing that the release of OH− from the modified samples increased in the following order: APTES4.0CEC–Mt > APTES3.0CEC–Mt > APTES2.0CEC–Mt > APTES1.0CEC–Mt. Batch experiments were conducted and different conditions (pH, temperature and co-existing ions) were used to evaluate the adsorption capacity of the modified samples. The study developed a new way to confirm the mechanism, which indicated that ligand adsorption was the dominant sorption mechanism for Sr(II) uptake onto APTES–Mts. In general, APTES grafted montmorillonite possessed a higher efficiency of Sr(II) uptake and showed great potential for Sr(II)-rich wastewater treatment.
研究领域:
环境科学
·
材料科学
·
化学工程
·
环境污染治理
·
吸附科学
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2018
·
IF 5.116
Zhangxing He,Yingqiao Jiang,Jing Zhu,Haiyan Wang,Yuehua Li,Huizhu Zhou,Wei Meng,Lei Dai,Ling Wang
N-doped carbon coated LiTi 2 (PO 4 ) 3 composites were synthesized by polyaniline (PANi) as carbon and nitrogen bi-sources, and used as anode for aqueous lithium ion battery (ALIB). High-quality N-doped carbon layers were achieved to modify LiTi 2 (PO 4 ) 3 crystal. ALIB using as-synthesized LiTi 2 (PO 4 ) 3 @C-N as anode exhibited superior rate performance. It delivered discharge capacities of 122.4, 105.8, and 95.3 mAh g −1 at rates of 0.2, 10, and 20C, respectively, much higher than those (97.4, 61.1, and 43.9 mAh g −1 ) of LiTi 2 (PO 4 ) 3 /C using sucrose as carbon source. Furthermore, LiTi 2 (PO 4 ) 3 @C-N anode demonstrated outstanding cycling performance with a capacity retention of 82.1% after 1000 cycles at 2C, while only 56.3% of capacity retention was kept for that using sucrose as carbon source. The excellent electrochemical performances of LiTi 2 (PO 4 ) 3 @C-N are mainly attributed to good dispersion, proper carbon layer, and nitrogen doping, further accelerating the charge transfer and diffusion of Li ions/electrons.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
FOOD HYDROCOLLOIDS
·
2022
·
IF 11.504
Yini Liu,Rui Wang,Debao Wang,Zhilan Sun,Fang Liu,Dequan Zhang,Daoying Wang
Food safety caused by microbial contamination is an important problem that is difficult to solve for the food industry. In this study, the effective antibacterial hydrogel from electrospinning nanofibers prepared using gelatin, chitosan, and 3-phenyllactic acid (PLA) after water absorption was used to improve the antibacterial performance and prolong the shelf life of chilled chicken meat. The structure, water-absorbing ability, antibacterial ability, and fresh-keeping ability of this hydrogel were characterized. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy showed that the carboxyl group in PLA reacted with the amino group in chitosan, which formed amide bond under acidic conditions. This bond enhanced the water absorption and stability of the hydrogel. Low-field nuclear magnetic resonance showed that the addition of PLA not only changed the structure of hydrogels but also changed the ratio of different states of water in the hydrogels. The swelling ratio of GCP-1 hydrogel was two times larger than that of GCP-0 hydrogel, and scanning electron micrographs showed that the GCP-1 hydrogel after water absorption had a unique spongy shape. Furthermore, the GCP-1 hydrogel effectively inactivated foodborne pathogens Staphylococcus aureus and Escherichia coli and prolonged the preservation of chilled chicken to 4 days. This study provides an innovative way to apply electrospinning nanofibers in food packaging.
研究领域:
食品科学
·
生物材料学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）