International Journal of Electrochemical Science
·
2024
·
IF 1.3
Yuanli Zhang,Meilan Sun
A highly responsive and specific electrochemical biosensor utilizing Ag-Au bimetallic nanoparticles was engineered for the measurement of B-type natriuretic peptide (BNP), serving as an indicator for heart failure. The sensor was fabricated by modifying a glassy carbon electrode with Ag-Au bimetallic nanoparticles (average diameter: 20 ± 3 nm) and immobilizing anti-BNP antibodies. The sensor exhibited a wide linear range (0.0001–100 ng/mL), low limit of detection (0.03 pg/mL), and excellent specificity towards BNP, with minimal interference from other proteins (< 5 %). The practicality of the sensor was demonstrated by analyzing spiked serum samples, with recoveries ranging from 96.4 % to 103.5 % and relative standard deviations less than 4.5 %. The superior analytical property of the sensor is due to the synergistic effect of Ag and Au in enhancing electron transfer and antigen-antibody binding. The suggested biosensor holds significant promise for the early detection and monitoring of heart failure in medical environments.
研究领域:
生物医学工程
·
分析化学
·
心血管医学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2019
·Vol. 125
·期 1
·1-11
·
IF 1.784
Deng Senlin,Yang Zebin,Lv Guojun,Zhu Yongqiang,Li Haichao,Wang Fumin,Zhang Xubin
A novel WO 3 nanosheets (WO 3 NS)/g-C 3 N 4 Nanosheets’ (g-C 3 N 4 NS) nanocomposite photocatalyst was fabricated through a simple calcination process. WO 3 NS was first prepared with the aid of P123 lamellar micelles and g-C 3 N 4 NS was synthesized by two-step calcination process. The nanocomposite photocatalyst was characterized by X-ray powder diffraction, scanning electron microscopy, Fourier transform infrared spectrometry, UV–Vis diffuse reflection spectroscopy, X-ray photoelectron spectroscopy, and photoluminescence. The novel nanocomposite photocatalyst demonstrated higher photocatalytic activity for rhodamine B degradation than corresponding g-C 3 N 4 NS. 20 wt% WO 3 NS/g-C 3 N 4 NS showed the highest photocatalytic performance, which was 4.70 times higher than that of pure g-C 3 N 4 NS. The results confirmed that the incorporation of WO 3 NS could definitely accelerate the transfer of photogenerated electrons and effectively promote the separation of electrons and holes, thereby improving the photocatalytic efficiency. The trapping experiments proved that the mechanism of photocatalytic degradation may be rooted in the formation of Z-scheme system.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2019
·Vol. 46
·期 1
·509-520
·
IF 2.064
Tang Chang-cun,Fang Yan-fen,Cao Xin-qiang,Tian Hai-lin,Huang Ying-ping
In this paper, bismuth oxybromide (BiOBr) photocatalysts were synthesized in the presence of tetrabutylammonium bromide (TBAB) at the different volume fractions of ethanol/water and named as BiOBr 0 , BiOBr 20 , BiOBr 50 , BiOBr 80 and BiOBr 100 , respectively. The samples were characterized and applied to the degradation of Rhodamine B (RhB) under visible-light irradiation ( λ ≥ 420 nm). The results indicated that both TBAB and ethanol significantly affected the crystal phase, morphology and surface charge distribution of BiOBr. The exposed (110) faces of BiOBr with Bi 3+ sites contributed to its photocatalytic activity via the enhanced separation of electrons and photogenerated holes as well as the better photo-stability. BiOBr 50 showed the optimal activity for the photodegradation of RhB. Superoxide radical (O ·− 2 ) as the dominant active species was responsible for the degradation of RhB.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2020
·Vol. 27
·期 18
·22639-22647
·
IF 3.056
Ren Qiangqiang,He Limo,Hu Song,Li Hanjian,Li Shanxue,Deng Zengtong,Song Gongxiang,Su Sheng,Wang Yi,Xiang Jun
The formation of highly graphitic phenolic resin chars (GPFCs) during catalytic carbonization at relatively low reaction temperature (1200–1600 °C) using novel Ni-Zn-B alloy catalyst with small amount of addition (5–15%) was systematically studied. Only two kinds of graphites (turbostratic graphite and ordered graphite) can be found in GPFCs after catalytic carbonization with Ni-Zn-B and their proportions were changed with reaction conditions. When Ni-Zn-B was involved at 1200–1600 °C, the phenolic resin char was fully transformed to be graphite, and ordered graphite content increased to 28.42% at 1400 °C, which was also almost twice of ordered graphite content in the char catalyzed by pure Ni. But the order graphite content would decrease due to sintering at higher reaction temperature. The addition of Zn and B can promote nickel-based alloy catalytic action by reducing melt point and accelerating graphitization respectively. It was also found that ordered graphite content could be used as a key evaluation parameter to directly reflect the quality of GPFCs based on detailed characteristics analysis. The model between three reaction conditions (reaction temperature, retention time, catalyst content) and ordered graphite content was built with artificial neural network (ANN), and the prediction accuracy of ANN was high up to 91.48%.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2019
·
IF 8.456
Xiuhua Sun,Qi Li,Zhiren Guo,Ke Wang,Taijiang Gui,Changlu Gao
In this paper, two series of poly(sulfobetaine methacrylate)-b-poly(lauryl methacrylate) (PSBMA-b-PLMA) diblock copolymers were prepared to investigate the core–shell reversion of amphiphilic copolymers. Experimental results proved that the PSBMA-b-PLMA copolymers can be self-assembled as core–shell nanoparticles in chloroform. Moreover, 1H NMR spectra and contact angle measurements revealed that there is a transitional PSBMA/PLMA block ratio of 0.6, above which the nanoparticles are capable of switching their core and shell in aqueous solution. Consequently, nanoparticles with PSBMA/PLMA block ratios above 0.6 showed superior antifouling and antibacterial abilities to those with block ratios below 0.4. Moreover, it was also found that the block chain length plays an important role in core–shell reversion as evidenced by 1H NMR spectra, water contact angle, and antifouling tests. As a result, coatings fabricated with the PLMA100 series of nanoparticles showed better antifouling abilities than those of the PLMA150 series at the same block ratio probably because of the thinner shell of PLMA100 copolymers. PSBMA100-b-PLMA100 was proved to be the best candidate for the fabrication of antifouling coatings as it exhibited the highest efficacy in antibacterial adhesion and antiprotein adsorption. This study provided a facile method to fabricate antifouling coatings by developing amphiphilic diblock copolymers with tuned hydrophobic/hydrophilic block ratio, block chain length, etc.
研究领域:
材料科学
·
生物医学工程
✓ 已验证
DOI
PubMed
高影响因子
Polymers
·
2025
·Vol. 17
·期 13
·1874
·
IF 4.9
Ruting Luo,Yujie Mu,Le Zhao,Jinglin Hua,Lixin Cao,Danting Chen,Kun Li,Zhenkai Jin,Yanchuan Guo,Bing Zhang,Min Wang
Skin is the first line of defence between the human body and the outside world, and it is constantly exposed to external injuries and wounds for a variety of reasons. Collagen is a structural protein of the extracellular matrix and an important component of the dermis. As a wound dressing, collagen not only provides nutrients to wounds but also enhances the immune response in the pre-healing phase, making it an excellent biomaterial for healing. In this study, we used electrospinning and freeze-drying technology to prepare a Bovine Achilles Tendon Collagen (BATC) electrospun composite membrane and a BATC freeze-dried composite membrane using BATC as a substrate supplemented with 16.7% Polyethylene oxide (PEO) and 0.2% Kukoamine B (KuB). The physicochemical properties and biocompatibility of the BATC composite membrane were verified via scanning electron microscopy, Fourier-transform infrared spectroscopy, and DSC analysis and by measuring the DPPH radical-scavenging capacity, water absorption, water retention, in vitro drug release, and extract cytotoxicity. The BATC composite membrane was found to have a significant effect on skin wound healing, especially in the middle stage of healing, in a mouse full-thickness skin injury model. The BATC/PEO/KuB electrospun composite membrane (EBPK) had the best capacity for promoting wound healing and can be used as a wound dressing for in-depth research and development, and KuB, a monomer component with a clear structure and mechanism of action, can be used as a candidate component of composite dressings.
研究领域:
生物材料
·
创伤修复
·
药理学
·
组织工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CRYSTENGCOMM
·
2011
·Vol. 14
·期 3
·1038-1044
·
IF 4.006
Ming Ge,Lu Liu,Wei Chen,Zhen Zhou
With Rhodamine B as a model compound, the photocatalytic oxidation of organic contaminants in aqueous solution was investigated within a cooperating porous BiVO4/H2O2 system under simulated sunlight irradiation. Peanut-shaped porous BiVO4 was prepared through a simple template-free solvothermal method with high yield, and was used in the cooperating catalyst/H2O2 system. The possible formation mechanism of peanut-shaped BiVO4 nanostructures was investigated. In the peanut-shaped BiVO4/H2O2 system, nearly complete degradation of Rhodamine B was observed after 60 min of irradiation under sunlight irradiation. The as-obtained porous BiVO4 photocatalyst displayed higher photocatalytic activity than those of the reference product hydrothermally synthesized and the photocatalyst P25 in the same catalyst/H2O2/sunlight system. The photocatalytic processes of the BiVO4/H2O2/sunlight system may consist of both OH˙ oxidation and direct hole attack. In addition, the peanut-shaped porous BiVO4 nanostructures were stable and maintained high photocatalytic efficiency during repeated recycles in the H2O2-containing system.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Materials
·
2019
·Vol. 12
·期 23
·3948
·
IF 2.972
Lingfang Qiu,Zhiwei Zhou,Mengfan Ma,Ping Li,Jinyong Lu,Yingying Hou,Xiangshu Chen,Shuwang Duo
Novel visible-light responded aluminosilicophosphate-5 (SAPO-5)/g-C3N4composite has been easily constructed by thermal polymerization for the mixture of SAPO-5, NH4Cl, and dicyandiamide. The photocatalytic activity of SAPO-5/g-C3N4is evaluated by degrading RhB (30 mg/L) under visible light illumination (λ > 420 nm). The effects of SAPO-5 incorporation proportion and initial RhB concentration on the photocatalytic performance have been discussed in detail. The optimized SAPO-5/g-C3N4composite shows promising degradation efficiency which is 40.6% higher than that of pure g-C3N4. The degradation rate improves from 0.007 min−1to 0.022 min−1, which is a comparable photocatalytic performance compared with other g-C3N4-based heterojunctions for dye degradation. The migration of photo-induced electrons from g-C3N4to the Al site of SAPO-5 should promote the photo-induced electron-hole pairs separation rate of g-C3N4efficiently. Furthermore, the redox reactions for RhB degradation occur on the photo-induced holes in the g-C3N4and Al sites in SAPO-5, respectively. This achievement not only improves the photocatalytic activity of g-C3N4efficiently, but also broadens the application of SAPOs in the photocatalytic field.Keywords:g-C3N4;SAPO-5;composite;photocatalytic;visible light
研究领域:
材料科学
·
环境科学
·
化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL PHYSICS LETTERS
·
2024
·
IF 2.8
Yelin Ding,Yiwei Zhao,Zhihui Deng,Kai Lian,Zhengtong Wang,Xiaohui Liu,Chun Sun
Halide perovskites have attracted widespread attention in the fields of photovoltaics, LEDs, lasers, and photocatalysis due to their unique optoelectronic properties. Here, we proposed a method to synthesize CsPbBr 3 /TiO 2 composite material by embedding precursors into mesoporous titanium dioxide pores and inducing in-situ growth of the perovskites within the pores. Due to the encapsulation of mesoporous TiO 2 , CsPbBr 3 maintains its excellent luminescent characteristics in water, air, and at high temperatures. Furthermore, the Z-type heterojunction structure formed between mesoporous TiO 2 and internal CsPbBr 3 significantly enhances the photo-generated current, and the response time has increased by 1.7 times.
研究领域:
材料科学
·
光催化
·
光电探测器
·
光电
✓ 已验证
产品关联
DOI
高影响因子
LUMINESCENCE
·
2019
·Vol. 34
·期 2
·193-199
·
IF 1.691
Nan Liu,Juan Hao,Lili Chen,Yonghai Song,Li Wang
Zeolitic imidazolate framework-8 (ZIF-8) loading rhodamine-B (ZIF-8@rhodamine-B) nanocomposites was proposed and used as ratiometric fluorescent sensor to detect copper(II) ion (Cu 2+ ). Scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray powder diffraction, nitrogen adsorption/desorption isotherms and fluorescence emission spectroscopy were employed to characterize the ZIF-8@rhodamine-B nanocomposites. The results showed the rhodamine-B was successfully assembled on ZIF-8 based on the π-π interaction and the hydrogen bond between the nitrogen atom of ZIF-8 and –COOH of rhodamine-B. The as-obtained ZIF-8@rhodamine-B nanocomposites were octahedron with size about 150–200 nm, had good water dispersion, and exhibited the characteristic fluorescence emission of ZIF-8 at 335 nm and rhodamine-B at 575 nm. The Cu 2+ could quench fluorescence of ZIF-8 rather than rhodamine-B. The ZIF-8 not only acted as the template to assemble rhodamine-B, but also was employed as the signal fluorescence together with the fluorescence of rhodamine-B as the reference to construct a novel ratiometric fluorescent sensor to detect Cu 2+ . The resulted ZIF-8@rhodamine-B nanocomposite fluorescence probe showed good linear range (68.4 nM to 125 μM) with a low detection limit (22.8 nM) for Cu 2+ combined with good sensitivity and selectivity. The work also provides a better way to design ratiometric fluorescent sensors from ZIF-8 and other fluorescent molecules.
研究领域:
分析化学
·
材料科学
✓ 已验证
DOI
高影响因子
INORGANIC CHEMISTRY
·
2025
·
IF 4.7
Bo Yang,Suqiong Yan,Shirong Ban,Wei Huang
Commercial phosphines and phosphoniums were commonly reported to have unstable triplet dissipation because of the flexible C–P pyramidal geometry, resulting in extremely weak or no phosphorescence. To boost triplet populations and stability by restricting the molecular motion and rebuilding the electronic structures, we reported that the dual-ring-locking strategy could enable elevated intersystem crossing (ISC) and triplet radiation for the rigid benzo[b]phospholium configuration, exhibiting intense persistent room temperature phosphorescence (RTP) in poly(vinyl alcohol) (PVA). Among them, dual-ring-locked [P1]+[Cl]− showed near-ultraviolet fluorescence maximized at 400 nm in dichloromethane and blue RTP emission at 453 nm (Φphos ≈ 12.4%, τphos > 1200 ms) in the PVA matrix. In contrast, [P2]+[Cl]− possessed a single ring-locked nucleus that had red-shifted emission and weak phosphorescence (Φphos < 1.8%, τphos = 74.2 ms). Time-dependent density functional theory (TD-DFT) disclosed that the improved spin-flipping of phosphoniums benefited from the integrated π–π*/n−π* transition, rational split energy, and rigid excited states. The impressive OU-RTP duration could function as an afterglow pattern for optical encryption or as an emitting layer for light-emitting diode (LED) applications.
研究领域:
材料科学
·
光学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Chinese Medicine
·
2025
·Vol. 20
·期 1
·1-20
·
IF 5.7
Liu Changtong,Guo Rui,Zhou Yue,Zhu Miao,Shao Li,Wang Yingchao,Zhao Lu
Background Cardiac hypertrophy, characterized by the thickening of the heart muscle, arises from factors such as hypertension and genetic mutations, often leading to adverse outcomes like heart failure and arrhythmias. Guanxinning tablets (GXNT), a botanical drug composed of the blood-activating herbs Salvia miltiorrhiza Bunge. and Ligusticum striatum DC., are widely used in the treatment of cardiovascular diseases. However, the active ingredients and their molecular mechanisms are yet to be fully understood. Methods We evaluated the anti-hypertrophic effects of GXNT and screened its active substances via cardiac function live-imaging on an aristolochic acid A-stimulated zebrafish cardiac hypertrophy model, and through F-actin immunostaining on a phenylephrine-induced hypertrophic NRCMs model. Additionally, the protective effects of GXNT’s active substances were analyzed in a mouse model of cardiac hypertrophy using echocardiography, histopathology analysis, and western blotting. Results The anti-hypertrophic effects of GXNT were assessed using an aristolochic acid A-stimulated zebrafish model and phenylephrine-induced hypertrophic NRCMs. GXNT demonstrated significant anti-hypertrophic effects in both models. Phenotypic screening identified Senkyunolide I (Sen I) from Ligusticum striatum as the active component in the zebrafish model, while Salvianolic acid B (Sal B) and Rosmarinic acid from Salvia miltiorrhiza emerged as the key anti-hypertrophic compound in NRCMs. In a mouse model of isoproterenol-induced cardiac hypertrophy, Sal B and Sen I showed synergistic effects, improving cardiac function, reducing oxidative stress, and suppressing inflammation. Mechanistically, transcriptomic sequencing highlighted cooperative modulation of MAP3K1 signaling by the two compounds. Notably, siRNA-mediated knockdown of MAP3K1 in cardiomyocytes attenuated the hypertrophic phenotype, supporting its essential role in the pathological process. Molecular docking and dynamic simulations further supported their binding potential to MAP3K1. Conclusion These findings underscore GXNT’s potent anti-hypertrophic effects, possibly driven by the synergistic actions of Sal B and Sen I, and offer insights into its therapeutic potential through MAP3K1 signaling regulation.
研究领域:
心血管药理学
·
分子药理学
·
中药学
·
信号转导
·
转化医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）