INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Xinyi Xing,Xian Shi,Mengya Ruan,Qichun Wei,Ying Guan,Hui Gao,Siquan Xu
Introduction of the sulfonic acid group into H-β zeolite to prepare β-SO 3 H bifunctional catalysts for the efficient synthesis of 5-hydroxymethylfurfural (HMF) from cellulose . Catalysts characterization, such as XRD, ICP-OES, SEM (Mapping), FTIR, XPS , N 2 adsorption-desorption isotherm, NH 3 -TPD, Py-FTIR demonstrate the sulfonic acid group was successfully grafted onto the β zeolite. A superior HMF yield (59.4 %) and cellulose conversion (89.4 %) was obtained in the H 2 O(NaCl)/THF biphasic system under 200 °C for 3 h with β-SO 3 H(3) zeolite as catalyst. More valuable, β-SO 3 H(3) zeolite converts other sugars and obtains ideal HMF yield, including fructose (95.5 %), glucose (86.5 %), sucrose (76.8 %), maltose (71.5 %), cellobiose (67.0 %), starch (68.1 %), glucan (64.4 %) and also converts plant material (25.1 % for moso bamboo and 18.7 % for wheat straw) with great HMF yield. β-SO 3 H(3) zeolite catalyst keeps an appreciable recyclability after 5 cycles. Moreover, in the presence of β-SO 3 H(3) zeolite catalyst, the by-products during the production of HMF from cellulose were detected, and the possible conversion pathway of cellulose to HMF was proposed. The β-SO 3 H bifunctional catalyst has excellent potential for the biorefinery of high value platform compound from carbohydrates.
研究领域:
催化
·
化学工程
·
材料科学
·
生物化学
·
可再生能源
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD SCIENCE AND BIOTECHNOLOGY
·
2023
·
IF 2.9
Wu Jiao,Zhao Shan,Chen Xin,Jiu Yuanda,Liu Junfeng,Gao Jinglin,Wang Shijie
Honey quality is in relation to botanical origin, and physicochemical properties, elemental composition, and antioxidant activity have been used for assessment and identification of honeys. The goal of this study is to contribute to the general analysis of five unifloral honeys from Cocos nucifera L., Dalbergia benthami Prain, Bombax ceiba L., Castanea mollissima Bl., and mangrove in Hainan province, China. Our results revealed that B. ceiba honey had the highest pH (4.27), color (139.33 mm Pfund), ash content (1.03 g/100 g), and electrical conductivity (1312.00 μS/cm) in five unifloral honeys. Furthermore, B. ceiba honey also contained the highest levels of total phenolic content (75.54 mg GAE/100 g) and total flavonoid content (29.22 mg RE/100 g), as well as the strongest antioxidant activity (DPPH IC 50 value, 3.97 mg/mL; FRAP value, 6527.43 µmol TE/kg). Moreover, we revealed a considerable variation in element contents in honeys using ICP-MS, with potassium being the most predominant element. B. ceiba honey had the highest contents of K, Ca, Mg, and P, whereas the highest amount of Na was found in mangrove honey. Overall, our data indicated that B. ceiba honey deserves further research as a potential antioxidant agent.
研究领域:
农业
·
食品科学
·
分析化学
·
生物化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FUEL
·
2013
·
IF 3.357
Chenhua Shu,Tonghua Sun,Hongbo Zhang,Jinping Jia,Ziyang Lou
A novel integrated process of extraction with ionic liquid (IL) and reductive desulfurization by sodium borohydride (NaBH 4 ) was presented for gasoline desulfurization. The factors that influenced desulfurization efficiency were investigated and desulfurization efficiency reached more than 97% for model gasoline and more than 93% for real gasoline. The components of model gasoline after desulfurization were analyzed by gas chromatography/mass spectrometry (GC/MS) and the reaction routes of model sulfur compounds were proposed. The contents of sulfur, boron and nickel in aqueous solutions were analyzed by Chinese standard method or inductively coupled plasma (ICP). Furthermore, the structures of original and recycled ILs were analyzed by nuclear magnetic resonance (NMR) and the desulfurization performance of recycled ILs was investigated. Results indicated that ILs maintained their original structures after regeneration. Finally, desulfurization kinetics was also probed and results showed that desulfurization reactions of both model sulfur compounds and real gasoline could be treated as pseudo-first-order reactions.
研究领域:
化学工程
·
环境科学
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
E-POLYMERS
·
2021
·Vol. 21
·期 1
·590-605
·
IF 2.025
Li Zhao,Xianzhi Hu,Futing Zi,Yingmei Liu,Deqiong Hu,Peng Li,Huiling Cheng
In this study, a novel functional monomer N -(1-(2,4-difluorophenyl)-2-(1 H -1,2,4-triazol-1-yl)ethyl)acrylamide (NDTEA) was designed and synthesized, and was used to prepare Ni( ii ) ion-imprinted polymers (Ni( ii )-IIPs). Sixteen kinds of Ni( ii )-IIP (Ni( ii )-IIP 1–16 ) and corresponding non-imprinted polymers (NIP 1–16 ) were prepared by precipitation polymerization method. After optimized condition experiment, Ni( ii )-IIP 5 possessed maximum adsorption capacity and better imprinting factor under optimal experimental conditions which indicated by equilibrium adsorption experiments. The morphology and structural characteristics of Ni( ii )-IIP 5 were characterized by scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET). The adsorption selectivity of Ni( ii )-IIP 5 was analyzed by ICP-OES, and the results showed that Ni( ii )-IIP 5 had favorable selectivity recognition ability for Ni( ii ) when Cu( ii ), Co( ii ), and Cd( ii ) are used as competitive ions. The kinetic experiment indicated that the performance of Ni( ii ) adsorption on the surface of Ni( ii )-IIP 5 obeyed the pseudo-first-order model, and adsorption equilibrium was attained after 15 min. Isothermal adsorption process fitted to Langmuir and Freundlich isothermal adsorption models, simultaneously. The results showed that Ni( ii )-IIP 5 prepared by using a new functional monomer had better permeation selectivity and higher affinity for Ni( ii ), which also verified the rationality of the functional monomer design. At the same time, it also provided a broad application prospect for removal of Ni( ii ) in complex samples.
研究领域:
高分子科学
·
环境化学
·
材料科学
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY
·
2020
·
IF 3.086
Yupin Cao,Jinsu Feng,Lifu Tang,Guichun Mo,Weiming Mo,Biyang Deng
A new method for simultaneously determining cytokeratin fragment antigen 21–1 (CYFRA21-1), carcinoembryonic antigen (CEA), and carbohydrate antigen (CA15–3) was developed using single-particle, ICP-MS-based, magnetic immunoassay . Gold nanoparticles (AuNPs), ZnSe quantum dots (QDs), and Silver nanoparticles (AgNPs) were employed to tag antibodies. A highly efficient capture of CYFRA21-1, CEA, and CA15–3 was achieved using biotinylated, antibody-coated magnetic beads. AuNPs/ZnSe QDs/AgNPs-tagged second antibodies helped realize sensitive quantification of the target antigen using single particle ICP-MS. Under optimum conditions, CYFRA21-1, CEA, and CA15–3 linear concentration ranges were 0.05–50 ng mL −1 , 0.02–100 ng mL −1 , and 0.6–250 mU mL −1 . The correlation coefficients were 0.9999, 0.9987, and 0.9970, respectively. CYFRA21-1, CEA, and CA15–3 detection limits were 0.02 ng mL −1 , 0.006 ng mL −1 , and 0.25 mU mL −1 , respectively. Relative standard deviations (RSD) for CYFRA21-1, CEA, and CA15–3 were 3.2%, 4.4%, and 4.2%, respectively. The method simultaneously detected CYFRA21-1, CEA, and CA15–3 in human lung cancer serum samples with recoveries of between 89.8% and 101%.
研究领域:
医学诊断
·
癌症研究
·
分析化学
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2024
·
IF 8
Qian Long,Hanfeng Cui,Jing Zhang,Qiqi Fan,Ting Huang,Hai Shuai,Xiaocui Yin,Guobing Wei,Huanwen Chen,Hao Fan
Cu 2+ serves as a significant biomarker in various physiological processes. This study presents the development of a novel Ru-UiO-TPEA functionalized metal-organic framework (MOFs) probe for Cu 2+ detection, employing both electrochemiluminescence (ECL) and electrochemical (EC) methods. Employing a dual ligand-assisted energy transfer approach, we synthesized Ru-UiO with optimal ECL and EC properties by adjusting the synthesis ratio of biphenyldicarboxylic acid to Ru(dcbpy) 3 2+ . This was followed by its conjugation with N-(2-aminoethyl)-N, N′, N′-tris(pyridin-2-ylmethyl) ethane-1,2-diamine (AE-TPEA) to form the highly conjugated Ru-UiO-TPEA probe for Cu 2+ detection. As the Cu 2+ concentration increased, the probe exhibited a diminished ECL signal and an enhanced differential pulse voltammetry (DPV) signal. The dual-mode detection method enabled cross-validation of the ECL and EC signals, enhancing accuracy and effectively minimizing errors. The ECL and EC methods had detection limits of 0.26 nM (range: 1 nM to 10 μM) and 0.65 nM (range: 2 nM to 80 μM), respectively. Meanwhile, these two methods can effectively detect Cu 2+ in rat brain microdialysis fluid. Notably, the measured concentrations correlated well with those determined by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), highlighting its potential in biological and clinical bioelectronic sensing applications.
研究领域:
分析化学
·
生物化学
·
生物医学工程
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
OPTICAL MATERIALS
·
2019
·
IF 2.687
Nan Jiang,Yu Zhao,Zhiwei Zhu,Wenxue Li,Haiyun Qu,Haohong Chen,Lin Ge,Tengfei Xie,Qiang Liu,Yubai Pan,Jiang Li
Planar waveguide LuAG/10 at.%Yb:LuAG/LuAG laser ceramics were fabricated by the tape casting method combined with the vacuum pre-sintering and hot isostatic pressing (HIP) post-treatment. The morphologies of the raw materials, tapes and green bodies were observed. The microstructure, optical transmittance and the Yb 3+ ions distribution of the LuAG/10 at.%Yb:LuAG/LuAG ceramics with different pre-sintering temperatures after HIP post-treatment were mainly studied. The experimental results showed that the average grain size and in-line transmittance of the HIPed ceramics increased with the increase of pre-sintering temperature. For the LuAG/10 at.%Yb:LuAG/LuAG ceramics pre-sintered at 1825 °C for 20 h and then HIPed at 1700 °C for 3 h under 200 MPa Ar atmosphere, the in-line transmittance of the sample with the thickness of 2 mm was about 74% at 1100 nm and the maximum diffusion distance of Yb 3+ was about 166 μm. The bulk and grain boundary diffusion coefficients of Yb 3+ ions for the samples pre-sintered at 1775 °C–1825 °C after HIP post-treatment were calculated by Fick's second law by using the LA-ICP-MS. What's more, CW laser at 1030 nm was demonstrated and the maximum output power of 0.4 W with a slop efficiency of 9.4% was achieved.
研究领域:
材料科学
·
光学
·
激光物理
·
陶瓷
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）