JOURNAL OF MEMBRANE SCIENCE
·
2021
·
IF 8.742
Guiliang Li,Yanmin Qi,Haibo Lin,Na Lu,Jiaping Chen,Jianqiang Wang,Qiu Han,Fu Liu
Lamellar membranes are attracting extensive attention for high throughput and precise molecules/ions sieve separation. However, the energy-consuming exfoliation and low yield of single-layer nanosheets restrict the massive production of membranes. Herein, we facilely fabricated 2D Ni-mediated metal-organic framework (Ni-MOF) membranes directly from multiply stacked nanosheets (MSNs) for both aqueous and organic molecular sieve separation. Multiply layered nanosheets were obtained from a high concentration dispersion via simple ultrasonic treatment. The morphology and chemistry of synthesized Ni-MOF nanosheets were characterized via scanning electron microscopy (SEM), N 2 adsorption-desorption, Fourier transform infrared spectra (FTIR), and X-ray photoelectron spectra (XPS). The thickness of Ni-MOF membranes could be well regulated by the volume of dispersion. The membrane exhibited high molecular rejection to 8GX (97.29%), EB (96.28%), CR (99.69%), and CBB (93.31%) in water, respectively and a stable perm-selectivity in continuous 24 h filtration. The lamellar membrane showed excellent pressure and pH (2–10) resistance. The membrane achieved rational permeance of various organic solvents mainly depending on viscosity and good rejection to MB (91.37%), BY (92.01%), and EB (96.90%) in isopropanol.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS SURVEYS FROM ASIA
·
2021
·Vol. 25
·期 3
·312-323
·
IF 3.106
Song Qi,Ran Rui,Li Dongyang,Zhao Baohuai,Weng Duan
Mesoporous silica was used in conjunction with the ammonia evaporation method to prepare highly dispersed Ni catalysts for the dry reforming of methane (DRM). The effect of Ni dispersion on the catalytic performance was investigated by applying different Ni loadings. The pore structure, morphology, Ni dispersion, catalytic activity for DRM as well as the coke resistance were investigated. During the reaction at a relatively low temperature of 600 °C, all the three catalysts exhibited high stability in CH 4 and CO 2 conversion and excellent coke resistance, in comparison to Ni/SiO 2 catalyst prepared by the incipient wetness method. Among them, 10% Ni–SiO 2 exhibited the best catalytic performance with the maximum steady conversions of 62% and 69% for CH 4 and CO 2 at 600 °C, which was beneficial from its optimal Ni content and the presence of highly-dispersed metal nanoparticles confined in the mesopores.
✓ 已验证
产品关联
DOI
高影响因子
RENEWABLE ENERGY
·
2021
·
IF 8.001
Yuewen Shao,Junzhe Wang,Kai Sun,Guoming Gao,Chao Li,Lijun Zhang,Shu Zhang,Leilei Xu,Guangzhi Hu,Xun Hu
Pentanediols (1,2-pentanediol and 1,5-pentanediol) are important feedstock for synthesis of fine chemicals, production of which from the biomass-derived furfural or furfuryl alcohol (FA) has been considered as a sustainable route and attracted much interest. In this study, the catalysts with Ni–Fe as the metal sites and Mg–Al layered double hydroxides (LDH) as precursor of support were synthesized. The results showed that the presence of Fe in catalyst affected both the development of the pores of the catalyst and the catalytic behaviors of nickel species. A low Fe content facilitated formation of mesoporous structure, but the higher content destroyed the LDH structure, resulting in a decreased surface area. Fe could also react with metallic Ni to form NiFe alloy. This decreased the catalytic activity for the further hydrogenation of the furan ring in FA, and FA would thus have the chance to produce pentanediols via hydrogenolysis . The In-situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy characterization of hydrogenation of FA indicated that the alloying between Fe and Ni resulted in a weak adsorption of C C group in furan ring and moderate adsorption of C–O–C group, which suppressed the complete hydrogenation of FA while facilitated the ring-opening of FA to form the pentanediols.
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2023
·
IF 2.8
Xiao Qingmei,Guo Ziting,Huang Jinchao,Zhong Shengwen
The development of efficient sodium-ion batteries is essential to overcome the issue of limited lithium sources for preparing lithium-ion batteries. Layered Mn-based cathode materials have significant application potential because of their simple structure and high specific capacities. Serious voltage attenuation and phase transition are the prominent problems of layered manganese-sodium ion batteries. To eliminate these issues, in this study, we investigated the effects of different Mn/Ni ratios in Na-Ni-Mn cathode materials on their structural stability and electrochemical performances. Na 0. 8MnO 2 (NNM-8010), Na 0.8 Ni 0.1 Mn 0.9 O 2 (NNM-819), Na 0.8 Ni 0.2 Mn 0.8 O 2 (NNM-828), and Na 0.8 Ni 0.3 Mn 0.7 O 2 (NNM-837) were synthesized and characterized using X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, and electrochemical analyses. The addition of Ni 2+ increased the Mn oxidation state from + 3 to + 4, thus reducing the Jahn–Teller effect of Mn 3+ and stabilizing the material structure. NNM-819 exhibited the best electrochemical performance. Its initial discharge-specific capacity was 198.5mAh g −1 at a current density of 0.2C, and the capacity retention rate after 100 cycles was 86.9% at 0.5C. Moreover, its capacity retention rate at 1.0C high-rate cycling after 100 cycles remained high 81.9%. Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2023
·
IF 7.4
Yuwei Ma,Yan Li,Fenglong Zhang,Fei Ruan,Ruifen Wang,Guangtong Hai,Juming Liu,Jinxiao Bao
Ni directional doping in the lattice of CdS V with the Ni cations targeted linked to P (CdS V -Ni-P) was successfully synthesized via a step wise assembly method, which exhibited an excellent photocatalytic hydrogen production performance. The photoelectric performance characterization proved that the Ni directional doping and Ni cations targeted linked with P in CdS V -Ni-P not only accelerating the photo-generated electrons transfer but also decreasing efficiency of the charge recombination. The density functional theory (DFT) calculations proved that CdS V -Ni-P can also induce more charge-carriers participate in photocatalytic reaction and decrease electron binding restriction capacity. Moreover, the results of UV–vis DR spectra and VB-XPS spectra confirmed that the construction of this CdS V -Ni-P could effectively narrow the bandgap. Meanwhile, the result of Gibbs free energy demonstrated the S-H adsorption bond in CdS V -Ni-P was get weaken, which is benefit for hydrogen desorption from S sites, thus achieving a high hydrogen evolution reaction (HER) result. Based on the synergistic effects, CdS V -Ni 6.7 -P 9.6 presented a relatively high hydrogen evolution rate of 167.5 mmol h -1 g −1 under the visible light irradiation (λ ≥ 420 nm), which is almost 60 times of CdS V .
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2023
·
IF 3.8
Hong Yao,Guozhe Sui,Jinlong Li,Dongxuan Guo,Jiaqi Wang,Yuanzhi Yue,Bing Jia,Xuan Xuan,Jing Tang
The construction of efficient Z-scheme heterojunctions is considered as a promising approach to improve the transfer and separation of photogenerated carries in the field of photocatalytic hydrogen evolution from water splitting. Herein, a novel ZnIn 2 S 4 /P-Ni-MOF-74 with Z-scheme heterostructure is successfully fabricated from rhombic P-Ni-MOF-74 derived from Ni-MOF-74 through phosphorization treatment and ZnIn 2 S 4 flakes via a hydrothermal method . The Z-scheme ZnIn 2 S 4 /P-Ni-MOF-74 heterojunctions can provide abundant active centers, broaden the response range to visible light region, accelerate the transfer of interfacial charges, and suppress the recombination rate of photogenerated electron-hole pairs. As a result, ZnIn 2 S 4 /P-Ni-MOF-74 (20 wt% P-Ni-MOF-74) acquires a hydrogen production rate of 7865.31 μmol g −1 h −1 , which is 4.46 times higher than that of ZnIn 2 S 4 . An apparent quantum yield is 7.84% at 420 nm wavelength. Overall, this work may provide a new pathway for the rational design of efficient Z-scheme heterojunctions with photocatalytic hydrogen evolution.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2016
·
IF 7.145
Yingjie Zhou,Zemin Mao,Wei Wang,Zhengkai Yang,Xiang Liu
This paper reports a series of novel Ni-based metal–organic framework (Ni–MOFs) prepared by a facile solvothermal process. The synthetic conditions have great effects on the Ni–MOFs morphologies, porous textures, and their electrochemical performance. Improved capacitance performance was successfully realized by the in-situ hybrid of Ni–MOFs with graphene oxide (GO) nanosheets (Ni–MOFs@GO). The pseudocapacitance of ca. 1457.7 F/g for Ni–MOFs obtained at 180 °C with HCl as the modulator was elevated to ca. 2192.4 F/g at a current density of 1 A/g for the Ni–MOFs@GO with GO contents of 3 wt %. Additionally, the capacitance retention was also promoted from ca. 83.5% to 85.1% of its original capacitance at 10 A/g even after 3000 cycles accordingly. These outstanding electrochemical properties of Ni-based MOF materials may be related to their inherent characteristics, such as the unique flower-like architecture and fascinating synergetic effect between the Ni–MOFs and the GO nanosheets.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Yunhua Liu,Xianguo Ma,Hongsheng Huang,Guowei Deng,Jiexue Wang,Xiaojuan Chen,Taotao Gao
Designing efficient and cost-effective electrocatalysts for overall water splitting remains a major challenge in hydrogen production . Herein, ammonia was introduced to pyrophosphate chelating solution assisted Ni particles preferential plating on porous Fe substrate to form coral-like Ni/NiFe-Pyro electrode. The pyrophosphate with multiple complex sites can couple with nickel and iron ions to form an integrated network structure, which also consists of metallic nickel due to the introduction of ammonia. The large network structure in Ni/NiFe-Pyro significantly enhances the synergistic effect between nickel and iron and then improves the electrocatalytic performance. As a result, the coral-like Ni/NiFe-Pyro@IF exhibits good electrocatalytic activity and stability for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). The electrolyzer assembled with Ni/NiFe-Pyro@IF as cathode and anode just needs a low water-splitting voltage of 1.54 V to obtain the current density of 10 mA cm −2 . Meanwhile, the stability test of Ni/NiFe-Pyro@IF is performed at the current densities ranging from 10 to 400 mA cm −2 for 50 h without any significant decay, indicating robust catalytic stability for overall water splitting. This strategy for synthesizing metal/metal pyrophosphate composites may provide a new avenue for future studies of efficient bifunctional electrocatalysts .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Qing-Qing Pang,Xi-Zheng Fan,Sha-Sha Yi,Xin Du,Zhong-Yi Liu,Xin-Zheng Yue
The design of bifunctional catalysts with spatially separated active sites holds significance importance in achieving simultaneous electrooxidation and hydrogen evolution reaction (HER). Herein, a core-shell Re-Ni@Ni(OH) 2 /CC heterostructure is demonstrated for the electrocatalytic furfural oxidation reaction (FOR) coupled with HER. Experimental results and theoretical analyses reveal that Re not only modulates the heterointerface between Re-Ni core and Ni(OH) 2 shell, facilitating furfural (FF) adsorption at Ni(OH) 2 sites, but also regulates electronic structure of Ni. This leads to a negative shift in the d-band center from Fermi level, effectively weakening hydrogen adsorption at Ni sites in Re-Ni@Ni(OH) 2 heterostructure, thereby improving the HER process. As a result, the synthesized Re-Ni@Ni(OH) 2 /CC exhibits a low cell voltage of 1.40 V @10 mA cm −2 for the FOR||HER. This study highlights the importance of modulating metal’s electronic structure and identifying active sites, which has great potential for improving bifunctional electrocatalytic reactions.
✓ 已验证
产品关联
DOI
高影响因子
Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2024
·
IF 3.9
Wenhui Xiong,Zijie Cai,Zihao Wang,Zhongkai Wu,Wencen Mei,Zhizheng Wu,Dingbang Liu,Shiming Yang,Weiping Zhou,Zhenzhi Cheng,Jun Wang,Guangsheng Luo
Multivariate transition metal sulfides and porous nanosheet architectures hold promising potential for applications for the energy-related application. Nevertheless, the addition of polymer binders and conductive agents can adversely affect their electrochemical performance. In this work, we present self-assembled Ni-Co sulfide nanosheet arrays growing on foamed Ni (Ni-Co-S@NF). Ni-Co-S@NF electrode materials are synthesized through the complete sulfidation of interconnected ultrathin nanosheets derived from NiCo layered double hydroxides. The highly conductive nickel foam facilitates electron transfer while the 3D network structure promotes electrolyte diffusion and penetration. Hence, porous Ni-Co-S@NF materials presents the excellent specific capacitance as 1286.6C g −1 in 1 A g −1 and retained 70 % of its original capacity over 5000 charge–discharge cycles. Furthermore, we assemble an asymmetric supercapacitor used active carbon as negative-electrode material and Ni-Co-S@NF as positive-electrode material. This device delivers the specific energy is 74.0 Wh kg −1 and specific power of 850.0 W kg −1 .
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2019
·
IF 5.128
Xiaodong Li,Yanli Huang,Qian Zhang,Zhijun Zuo,Xiaodong Wang,Vladimir A. Vinokurov,Zheng Wang,Wei Huang
Ni-MoCeZr-MgAl(O) mixed oxide catalysts were successfully prepared from the Ce, Zr and Mo promoted hydrotalcite-like compounds (HTLcs) precursors using the simple and effective hexamethylenetetramine(HMT)-assisted hydrothermal synthesis method by tuning the molar ratio of n(HMT)/n(NO 3 − ). The influence of Ni content (3, 4.8, 6, 9 and 12%) on the catalytic performance of these catalysts in dry reforming of methane (DRM) was focused. Adjusting the content of Ni was able to change the metal dispersion and metal particle size, and small-sized (around 7 nm) and evenly dispersed Ni particles were obtained at Ni content of 6%. The catalyst with 6% Ni loading stood out for the high activity and stability, the CH 4 conversion of which fluctuated around 95% continuously for 610 h under GHSV of 60,000 mL·g cat −1 ·h −1 , and it was still above 92.8% throughout the 36-h-duration DRM experiments under GHSV of 80,000 mL·g cat −1 ·h −1 . This research may provide a simple and effective methodology for the synthesis of stable and efficient DRM catalysts.
✓ 已验证
DOI
高影响因子
Journal of Physical Chemistry Letters
·
2024
·
IF 4.8
Yanchang Wang,Yao Xiao,Jiangnan Huang,Chunxiao Zhang,Kentaro Yamamoto,Yoshiharu Uchimoto,Weifeng Wei,Hongshuai Hou,Datong Zhang,Xiaobo Ji
For cathode materials of sodium-ion batteries, O3-type Ni/Fe/Mn-based (Na-NFM) layered oxides have garnered extensive attention because of high economic viability, environmental friendliness, and the potential for high energy density. Among them, Fe-rich compositions exhibit higher initial charge capacity and lower bill-of-material costs, while they fade rapidly and exhibit low initial coulombic efficiency, hindering their commercialization prospects. In this work, we investigate the failure of Fe-rich Na-NFM materials through X-ray absorption spectroscopy methods. The results reveal a combined failure mechanism that encompasses not only the conventional theory of Fe migration but also an abnormal Ni-redox deterioration, which has not yet been reported. More factors related to the failure of Fe-rich Na-NFM layered oxides are discussed in detail. These findings are expected to inspire targeted research efforts toward Fe-rich Na-NFM materials, thereby accelerating the practical application of sodium-ion batteries.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）