文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第1945至1956个,产品总数5,004个

切换升序
4′
JOURNAL OF MATERIALS SCIENCE · 2016 ·Vol. 51 ·期 22 ·10229-10244 · IF 2.302

The impact of liquid crystal fillers on structure and properties of liquid-crystalline shape-memory polyurethane composites I: 4-dodecyloxybenzoic acid

Ban Jianfeng,Zhu Linjiang,Chen Shaojun,Wang Yiping

Aiming to elucidate the influence of liquid crystal fillers on the structure and properties of liquid-crystalline (LC) shape-memory polyurethane (SMPU) composites, a series of LC-SMPU composites are successfully prepared by adding various concentrations of 4-dodecyloxybenzoic acid (DOBA) to shape-memory polyurethane containing 40 wt% hard segment content (SMPU40). The structure, morphology, thermal properties, liquid crystalline properties, and shape memory properties are systematically investigated. The results demonstrate that DOBA is successfully incorporated into the polymer matrix of SMPU40 without interrupting the dimerization structure of DOBA that allows it to exhibit LC properties. The incorporated DOBA not only improves the crystallizability of the soft segment but also promotes the crystallizability of the hard segment. The isothermal crystallization kinetics further reveal that the crystallization rate of the hard segment decreases as the DOBA content increases, and the crystallization of the LC-SMPU composites nucleates in a similar manner. The LC-SMPU composites are composed of a DOBA phase and an SMPU phase, which further forms soft phase–hard phase microphase separation structures. The composite tends to only maintain the nematic LC properties of DOBA due to the interruption of polyurethane chains. However, the LC-SMPU composites exhibit good triple-shape memory effects. The first step of strain recovery is associated with the melting transition of soft segment crystals of the polyurethane matrix, and the second step of strain recovery is resulted from the melting transition of the DOBA crystals.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2016 ·Vol. 52 ·期 5 ·2628-2641 · IF 2.302

The effect of liquid crystal fillers on structure and properties of liquid crystalline shape memory polyurethane composites II: 4-hexadecyloxybenzoic acid

Ban Jianfeng,Zhu Linjiang,Chen Shaojun,Wang Yiping

In order to better understand the interrelation between liquid crystal fillers and functional polymers, a series of liquid crystalline shape memory polyurethane composites (LC-SMPUCs), named shape memory polyurethane (SMPU)–4-hexadecyloxybenzoic acid (HOBA) composites, are prepared by incorporating HOBA into SMPU based on a polyethylene glycol (PEG) soft segment. The results demonstrate that the dimerization structure of HOBA is maintained in the as-prepared SMPU–HOBA composites, facilitating liquid crystalline properties. Characterization results display smectic C phase upon heating, while the isotropic temperature shifts to a higher temperature, broadening the temperature range of the liquid crystalline phase. The SMPU–HOBA composites form a two-phase separated structure containing a SMPU phase and a HOBA phase; the incorporated HOBA can promote crystallizability of both soft and hard segments of SMPU, while crystalline hard phases are maintained within the high temperature range. Thus, SMPU–HOBA composites demonstrate a two-step modulus change upon heating that releases a triple-shape memory effect. The final shape fixing ratio is higher than 99%, and the final shape recovery ratio reaches 90%. Therefore, the SMPU–HOBA composites successfully provide a desirable combination of liquid crystalline properties and triple-shape memory properties, making them ideal candidates for smart sensor, smart labels, etc.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Desalination and Water Treatment · 2024 · IF 1

The adsorption properties of 2,4-DCP on biochar derived from chitosan in aqueous solution

Jian Wu,Dajun Ren,Shuqin Zhang,Wenting Liu,Xiaoqin Zhang,Xiangyi Gong

Organic pollutants in aqueous solutions may potentially be adsorbed on biochar. In this study, biochar was derived from the pyrolysis of chitosan at 800°C. The removal rate of 2,4-dichlorophenol (DCP) exceeded 80%. Investigations by Fourier transform infrared spectroscopy and Brunauer– Emmett–Teller indicated that the adsorption of organic pollutants on biochar tends to be a physical process. The optimized pH was 5. All three isotherm models involved (Freundlich, Koble–Corrigan, and Henry) could describe the adsorption process of 2,4-DCP well on chitosan-biochar, which was non-uniform surface adsorption in a diluted solution. The adsorption was an endothermic process. It took 40 min to reach the adsorption equilibrium, and kinetics of the Elovich equation and intraparticle diffusion (IPD) model indicated that the adsorption rate at the rapid adsorption stage was simultaneously controlled by surface diffusion and IPD and that at slow adsorption stage was controlled by surface diffusion. The ionic strengths suggested that electrostatic interaction was not the dominant mechanism during this process.

研究领域: 环境科学 · 环境工程 · 材料科学 · 污染控制化学 · 吸附技术
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Inorganic Chemistry Frontiers · 2025 · IF 6.4

Photoinduced NO release of [Fe2(µ-SL)2(NO)4] complexes and their protein adducts: insights from structure, cytotoxicity, and photodynamic studies

Wenjun Gong,Yating Pang,Chenyu Wang,Wenming Wang,Hong-Fei Wang

The dinitrosyl iron complex (DNIC) is a ubiquitous functional brick often used as a vehicle for the NO radical and chelatable iron pool, with a key role in chemical and biomedical applications. In this work, four DNICs modified with different thiolate bridging ligands (–SL) were synthesized. These complexes were characterized by 1H-NMR, electrospray ionization mass spectrometry, and X-ray crystal diffraction. Photoinduced NO release from the complexes in solution was further explored by time-resolved infrared and time-resolved electron paramagnetic resonance (EPR) spectra. The cluster complexes showed relatively lower cytotoxicity against the normal human liver cell line HL-7702 and higher cytotoxicity against human cervical cancer cells, with a selectivity index of 2.4–4.8. The cluster complexes with different L groups had different rates of NO release and protein binding constants. Moreover, NO released upon photoirradiation entered living cells, which were successfully imaged using an NO-selective fluorescent probe. The ferritin complex adducts further enhanced the cytotoxicity and cellular fluorescent intensity of NO, and the crystal structure revealed the coordination of the Fe(SL)2 unit with Cys102 of ferritin. This study provides insight into the photodynamic mechanism of nitrosyl iron−sulfur clusters to understand their physiological activity.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2025 · IF 8.5

In-situ constructed tactic of palladium nanoparticles supported on hierarchical porous wood-derived cellulose framework towards efficient catalytic reduction on 4-nitrophenol

Qianqian Yu,Xiaohan Sun,Meiying Wu,Zejun Pan,Jing Chen,Zhaolin Yang,Xin Li,Yudong Li,Dexiu Min,Xiaodong Li,Chengyu Wang

With the advancement of technology, the production of domestic sewage and industrial wastewater containing dyes are increasing steadily. In the evolutionary process of catalytic reduction wastewater, recyclability and homogenization are still puzzles. Herein, a wood-derived cellulose catalytic system with hierarchical pore structure was proposed based on chlorite-alkali method for efficient catalytic reduction on 4-nitrophenol (4-NP). The chlorite-alkali hydrolysis process played a significant role in enhancing channel connectivity and hydrophilicity of balsa (BS, O. pyramidale ) when removing lignin and hemicellulose. The results of cumulative complete intrusion and extrusion showed that the porosity of BS increased from 76.07 % to 92.58 % after removing components. A universal in-situ constructed tactic of PdNPs supported on a dehemicellulose BS (DHBS) without external reducing agent. Additionally, the superhydrophilic hierarchical porous wood-derived cellulose structure had a synergistic effect with plasmonic enhancement of PdNPs on the catalytic reduction of 4-NP, resulting in reducing 4-NP rapidly, which achieving a reduction efficiency of 90 % in the 90 s with the rate constant of 1.51 min −1 . The approach addressed the issue of low catalytic metal particle load and hider catalytic activity resulting from the limited thickness and porosity, and has a good application prospect in wastewater treatment.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
TOXICOLOGY AND APPLIED PHARMACOLOGY · 2026 · IF 3.6

Disruption of progesterone synthesis by PBDEs: Potent inhibition of human and rat placental 3β-hydroxysteroid dehydrogenase by the metabolite 4-Bromodiphenyl ether

Lubin Xie,Qianjin Fei,Ming Su,Yunbing Tang,Yang Zhu,Ren-shan Ge,Ping Duan,Chengshuang Pan

Polybrominated diphenyl ethers (PBDEs) and their metabolite 4-bromodiphenyl ether (BDE3) are pervasive environmental contaminants suspected of endocrine-disrupting effects. This study investigates their inhibitory potential and mechanism of action against human (h3β-HSD1) and rat (r3β-HSD4) placental 3β-hydroxysteroid dehydrogenase, a pivotal enzyme in progesterone biosynthesis. Comprehensive enzymatic analysis revealed that among eight tested PBDE congeners and the structural analog 4-bromobiphenyl (BDP), only BDE3 and BDP exhibited significant inhibition. BDE3 was a potent, mixed/competitive inhibitor with IC 50 values of 5.86 μM (h3β-HSD1) and 12.35 μM (r3β-HSD4), significantly more potent than BDP (IC 50  ∼ 100 μM). Mechanistic studies using pregnenolone as substrate confirmed mixed/competitive inhibition for both compounds, indicating binding at the steroid substrate site, while analysis with NAD⁺ suggested mixed/noncompetitive inhibition. Molecular docking and dynamics simulations corroborated these findings, indicating BDE3 and BDP binding at the steroid/NAD⁺ interface with favorable binding energies, stabilizing the active-site conformation. Network toxicology analysis identified HSD3B1 (encoding h3β-HSD1) as a central hub gene linking PBDE exposure to preeclampsia, enriched in steroidogenesis and estrogen signaling pathways. Single-cell RNA-seq analysis revealed predominant HSD3B1 expression in extravillous and syncytiotrophoblasts, with reduced expression in preeclampsia. In silico virtual knockout of HSD3B1 predicted downstream disruption of cell cycle regulation and steroidogenic pathways. Pharmacokinetic predictions indicated both compounds have high intestinal absorption but potential hepatotoxicity. These results suggest that BDE3 may act as a potent inhibitor of placental 3β-HSD, potentially linking its disruption of progesterone synthesis to adverse pregnancy outcomes.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2026 · IF 9.1

Tailoring polyamide loose nanofiltration membrane with 4-aminobenzoylhydrazine for efficient dye/salt separation: the differential N-site reactivity modulation in interfacial polymerization

Jiahui Li,Zhongrui Chen,Jianhua Zhang,Ziping Song,Hongjin Yan,Haoyu Zhan,Qijia Han,Yunbo Zheng,Xiaojia Zheng,Hao Zhang,Quan Kang,Chunrui Wu

Exploring novel aqueous monomers to construct loose nanofiltration (LNF) membranes with excellent permeability and dye/salt selectivity is still needed for recovering resources in textile wastewater. In this study, a novel strategy for exploiting the differential N-site reactivities in 4-aminobenzoylhydrazine (4ABH) was proposed to precisely modulate the structure of the polyamide (PA) layer, thereby fabricating unique LNF membranes. The nucleophilic reactivities of 4ABH monomer and their effect on the PA layer formation were studied via density functional theory (DFT) and molecular dynamics simulation (MDS), which provided theoretical guidance for understanding the formation mechanism of LNF membranes. Based on the differential nucleophilic reactivities of N-sites in 4ABH (-NH₂ > -NH 2 of -NH-NH₂ > -NH- of -NH-NH₂), the proportion of large cavities within the PA cross-linked networks increased, and then the compact cross-linked structure emerged as the monomer concentration increased. The experimental result demonstrated that the optimized 4ABH/TMC LNF membrane exhibited a high water permeability of 45.03 L·m -2 ·h -1 ·bar -1 , while maintaining excellent rejection for methyl blue (MB) (95.18%), eriochrome black T (EBT) (99.24%) and congo red (CR) (99.64%) with a low salt rejection for Na₂SO₄ (24.37%), MgSO 4 (7.03%), NaCl (6.79%), and MgCl 2 (3.29%). Moreover, the membrane achieved a selectivity factor of 239.00 for CR/NaCl in dye/salt mixture solutions and showed robust stability and fouling resistance in continuous filtration tests. The strategy explored in this work provided a new insight into selecting suitable aqueous monomers for preparing the unique LNF membranes with excellent permeability and dye/salt selectivity.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry C · 2026 · IF 5.1

Co-substitution of Zn 2+ /Ge 4+ pair within garnet phosphors activated by Er 3+ for enhancing luminescence properties and optical thermometry

Yuanhao Chen,Xiaoshan Zhang,Yirong Liu,Haisheng Liu,Dechao Yu,Dawei Zhang

Gadolinium gallium garnet has been emerging as a starlet for preparing efficient luminescent materials, while via crystal field engineering the luminescence properties of rare-earth activator in its solid solution phosphors were scarcely explored. In this work, Er 3+ -doped Gd 3 Zn x Ga 5-2x Ge x O 12 (GZG 5- 2x G:Er 3+ ) solid solutions were prepared by high-temperature solid-state reaction, where a hetero-valent co-substitution strategy was implemented via introducing Zn 2+ /Ge 4+ pair to replace 2 Ga 3+ sites. X-ray diffraction Rietveld refinements confirm all samples crystallized into pure garnet phase. Upon 381 nm excitation, Er 3+ concentration was spectrally optimized to be about 10%, substituting the Gd 3+ sites, and via the Zn 2+ /Ge 4+ co-substitution, luminescence intensity of GZG 2 G:10%Er 3+ increases by more than 3 times in comparison with that of the baseline GZGG:10%Er 3+ sample. All the GZG 5-2x G:10%Er 3+ solid solution samples color in bright green under illumination using an ultraviolet ~ 365 nm lamp.Thermometric properties of Er 3+ 2 H 11/2 -4 S 3/2 thermally coupled levels of were systematically studied on basis of fluorescence intensity ratio principle. The GZG 5-2x G:10%Er 3+ all can perform temperature sensing over a wide temperature range of 298-573 K with a maximum relative sensitivity (S r ) above 1.20% K -1 and an applicable minimum temperature resolution (δT) around 0.4 K. Continuous exploration of solid solution-manipulating luminescent properties would develop novel thermometry probes (particularly for activator with spin-allowed transitions) with higher S r and smaller δT for practical optical temperature sensing.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS · 2026 ·Vol. 37 ·期 9 ·665 · IF 3.2

Effect of Sr2+ substitution on crystal structure, Raman characteristics and microwave dielectric properties of KCa1-xSrxPr(MoO3)4 ceramics for ULTCC applications

Su Xiuyuan,Chen Yuan-Bin,Chen Junyu,Ma Shijie,Lin Haiqiang

In this study, Sr 2+ was employed to substitute Ca 2+ in KCaPr(MoO 3 ) 4 ceramics. Such ion substitution was found to effectively enhance the Q × f value of KCaPr(MoO 3 ) 4 and moderately decrease its sintering temperature. Scanning electron microscopy (SEM) observations and density measurements indicated satisfactory sintering characteristics of this series of ceramics. Meanwhile, X-ray diffraction (XRD) and Raman spectroscopy analyses suggested the formation of a solid solution without obvious secondary phases or impurities, verifying the successful preparation of single-phase molybdate ceramics. On the basis of P–V–L theoretical analysis, it was suggested that K/Ca/Pr–O bonds mainly contribute to the bond ionicity (fᵢ), whereas Mo–O bonds exert considerable influences on the lattice energy (U), bond energy (E), and thermal expansion coefficient (α). Among the as-prepared ceramic samples, KCa 0.98 Sr 0.02 Pr(MoO 3 ) 4 exhibited the most favorable dielectric properties at 700 ℃ with a relative permittivity (εᵣ) of 10.744, a quality factor-frequency product (Q ×  f ) of 89 349 GHz, and a temperature coefficient of resonant frequency (τ f ) of − 59.947 ppm/  C. Benefiting from the ion substitution strategy, the obtained materials possessed relatively low sintering temperatures and high Q ×  f values, suggesting promising potential for application in ultra-low-temperature co-fired ceramics (ULTCC).

CAS / MDL: 1313-27-5 584-08-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Inorganics · 2026 ·Vol. 14 ·期 10 ·250 · IF 3.4

Synthesis, Hypoxia-Selective Anti-Oral Cancer Activity and Mechanism of a CA IX-Targeting Platinum(II) Complex Based on Pyridoxal 4-Sulfamoylphenylhydrazone

Jinxu Qi,Yanan Kou,Yunyun Zheng,Xianguang Bai,Bin Li

Tumor-mediated hypoxia resistance severely limits the therapeutic efficacy of conventional platinum-based drugs against oral cancer. Targeting carbonic anhydrase IX (CA IX), which is specifically overexpressed in hypoxic tumor cells, represents an effective strategy to reverse chemoresistance. In this work, a novel CA IX-targeting platinum(II) complex was synthesized using pyridoxal 4-sulfamoylphenylhydrazone as the ligand. Single-crystal X-ray diffraction reveals its stable square-planar coordination geometry in the solid state. Enzymatic assays revealed that the complex exhibited negligible inhibition toward the normal CA II isoform and displayed potent inhibitory activity against CA IX (Ki= 26.5 nM), superior to the ligand and the positive control compound U-104. Molecular docking suggests its stable binding to the active pocket of CA IX. In vitro assays exhibited notable hypoxia-selective cytotoxicity against oral cancer HSC-2 cells, with an IC50value of 3.7 ± 0.2 μM under hypoxic conditions. Mechanistic investigations suggest that the complex may induce oral cancer cell death partly by elevating intracellular reactive oxygen species (ROS) levels and activating the mitochondrial-mediated apoptotic pathway. It should be noted that the solution-state behavior, aquation, and hydrolysis of this platinum complex have not been experimentally explored in the present study; thus, the biologically active platinum-containing species remains uncharacterized, and the observed bioactivity cannot be unequivocally assigned to the intact solid-state complex. This study provides new insights and experimental support for the development of hypoxia-responsive platinum-based agents targeting CA IX against oral cancer.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Food Bioscience · 2026 · IF 6.2

Balancing dual-enzyme expression and synergistically engineering of 4-hydroxyphenylpyruvate dioxygenase for efficient 3-hydroxy-3-methylbutyrate biosynthesis by whole-cell catalysis

Mengrui Wang,Yaokang Wu,Xueqin Lv,Jianghua Li,Long Liu,Guocheng Du,Jian Chen,Yanfeng Liu

3-Hydroxy-3-methylbutyrate (HMB), a key L-leucine metabolite, alters protein metabolic balance during the growth of new muscle tissue and exhibits anti-catabolic effects, garnering widespread attention as a dietary supplement for sarcopenia treatment and sports training. Here, we identified an efficient 4-hydroxyphenylpyruvate dioxygenase from Allokutzneria albata ( Aa HPPD) via molecular docking and whole-cell reaction yield verification. By coupling this enzyme with an efficient L-amino acid deaminase derived from Proteus vulgaris ( Pv LAAD) for whole-cell biocatalysis, 8.66 mM HMB was produced from 25 mM L-leucine, achieving a molar conversion of 34.6%. To coordinate the expression of pathway enzymes, ribosome binding site combinations were optimized, increasing the molar conversion to 56.5%. Additionally, for the rate-limiting enzyme Aa HPPD, distal mutations enhancing thermostability were identified using the Protein Repair One Stop Shop server and Disulfide by Design 2. The co-expression of the double mutant Aa HPPD Q65L/E99D and Pv LAAD resulted in a 61.24% conversion rate. To further improve catalytic activity, four sites identified via alanine scanning were subjected to grouped saturation mutagenesis based on spatial location. The final strain, co-expressing Aa HPPD Q65L/E99D/L260I/V306I and Pv LAAD, achieved a molar conversion of 73.73% for HMB production using 25 mM L-Leu as substrates within 10 h under optimal whole-cell conditions. This study established an efficient method for HMB production via whole-cell catalysis and provided a feasible strategy for engineering the thermostability and activity of the rate-limiting enzyme, as well as synergistically optimizing the expression levels of cascade enzymes.

CAS / MDL: 119-26-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES · 2026 ·Vol. 27 ·期 12 ·5251 · IF 5.6

Copper-Doped Porous Carbon Derived from Biomass Substrate: A High-Efficient Catalyst for the Thermal Decomposition and Combustion Performance of DAP-4

Yiming Wang,Jinchao Qiao,Qiang Zhou,Zichen Yan,Liwei Zhang

To address the urgent demand for eco-friendly and low-cost catalysts to replace toxic heavy-metal additives in energetic materials, this work focuses on developing biomass-derived copper-doped porous carbon (CuPC) as a high-efficiency catalyst for the thermal decomposition and combustion of molecular perovskite energetic material (H2dabco)NH4(ClO4)3(DAP-4). Biomass carbonaceous material has garnered extensive attention in many fields, owing to the low cost, high utilization efficiency, and environment protection. Herein, the CuPC catalysts were rationally designed and fabricated via the high-temperature carbonization treatment of biomass carbonaceous material precursor. The catalytic effects of CuPC on the thermal decomposition and combustion characteristics of DAP-4 were systematically investigated. The results revealed that CuPC possessed inherent catalysis property on the decomposition and combustion reaction of DAP-4. CuxOynanoparticles were uniformly distributed on the surface of carbonized biomass substrates, endowing the catalysts with superior dispersibility. Thermal analysis results indicated that the addition of 5 wt% CuPC-3 reduced the thermal decomposition peak temperature from 378 °C of raw DAP-4 to 350 °C of DAP-4/CuPC-3. Moreover, the apparent activation energy of DAP-4 was notably decreased with the incorporation of CuPC catalysts. The combustion characterization results demonstrated that DAP-4 exhibited a more intense combustion process with the addition of CuPC, accompanied by elevated maximum combustion temperature and enhanced combustion heat. The catalytic mechanism of CuPC on the thermal decomposition and combustion of DAP-4 was further proposed. This work provides a targeted strategy for designing sustainable biomass-based catalysts to optimize the energy release performance of advanced molecular perovskite energetic materials.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。