JOURNAL OF NANOBIOTECHNOLOGY
·
2023
·Vol. 21
·期 1
·1-19
·
IF 10.2
Wang Xueqian,Dai Geyang,Jiang Guiying,Zhang Danya,Wang Ling,Zhang Wen,Chen Huang,Cheng Teng,Zhou Ying,Wei Xiao,Li Fei,Ma Ding,Tan Songwei,Wei Rui,Xi Ling
Background TMVP1 is a novel tumor targeting polypeptide screened by our laboratory with a core sequence of five amino acids LARGR. It specially binds to vascular endothelial growth factor receptor-3 (VEGFR-3), which is mainly expressed on neo-lymphatic vessels in sentinel lymph node (SLN) with tumor metastasis in adults. Here, we prepared a targeted nanoprobe using TMVP1-modified nanomaterials for tumor metastasis SLN imaging.Results In this study, TMVP1-modified polymer nanomaterials were loaded with the near-infrared (NIR) fluorescent dye, indocyanine green (ICG), to prepare a molecular imaging TMVP1-ICG nanoparticles (NPs) to identify tumor metastasis in SLN at molecular level. TMVP1-ICG-NPs were successfully prepared using the nano-precipitation method. The particle diameter, morphology, drug encapsulation efficiency, UV absorption spectrum, cytotoxicity, safety, and pharmacokinetic properties were determined. The TMVP1-ICG-NPs had a diameter of approximately 130 nm and an ICG loading rate of 70%. In vitro cell experiments and in vivo mouse experiments confirmed that TMVP1-ICG-NPs have good targeting ability to tumors in situ and to SLN with tumor metastasis by binding to VEGFR-3. Effective photothermal therapy (PTT) with TMVP1-ICG-NPs was confirmed in vitro and in vivo. As expected, TMVP1-ICG-NPs improved ICG blood stability, targeted tumor metastasis to SLN, and enhanced PTT/photodynamic (PDT) therapy, without obvious cytotoxicity, making it a promising theranostic nanomedicine.Conclusion TMVP1-ICG-NPs identified SLN with tumor metastasis and were used to perform imaging-guided PTT, which makes it a promising strategy for providing real-time NIR fluorescence imaging and intraoperative PTT for patients with SLN metastasis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2023
·Vol. 30
·期 21
·61018-61031
·
IF 5.8
He Miaolu,Feng Leihao,Cui Qi,Li Yushuang,Wang Jiaqi,Zhu Jiani,Wang Lei,Wang Xudong,Miao Rui
Metal–organic frameworks (MOFs) can be applied to enhance the property of forward osmosis membranes. However, organic solvents can easily remain in organic synthetic metal–organic frame materials and cause membrane fouling and a decrease in membrane permeability. In this study, water-based Zr-fumarate MOFs were synthesized and doped into the membrane active layer by interfacial polymerization to provide a water-based MOF-doped thin-film composite membrane (TFC membrane). It was found that doping the water-based MOFs effectively improved membrane hydrophilicity, and nanowater passages were introduced in the active layer to improve permeability. The water flux of the water-based MOF-doped TFC membranes was increased by 21% over that of the original membrane, and the selectivity performance of the membrane was improved while keeping the salt rejection basically unchanged. Additionally, the water-based MOF-doped TFC membrane showed good removal efficiency ( R d > 94%) and strong antipollution performance in the treatment of dye pollutants.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2023
·Vol. 14
·期 1
·1-13
·
IF 16.6
Sun Ji Wei,Wu Xuefeng,Liu Peng Fei,Chen Jiacheng,Liu Yuanwei,Lou Zhen Xin,Zhao Jia Yue,Yuan Hai Yang,Chen Aiping,Wang Xue Lu,Zhu Minghui,Dai Sheng,Yang Hua Gui
Practical electrochemical CO 2 -to-CO conversion requires a non-precious catalyst to react at high selectivity and high rate. Atomically dispersed, coordinatively unsaturated metal-nitrogen sites have shown great performance in CO 2 electroreduction; however, their controllable and large-scale fabrication still remains a challenge. Herein, we report a general method to fabricate coordinatively unsaturated metal-nitrogen sites doped within carbon nanotubes, among which cobalt single-atom catalysts can mediate efficient CO 2 -to-CO formation in a membrane flow configuration, achieving a current density of 200 mA cm −2 with CO selectivity of 95.4% and high full-cell energy efficiency of 54.1%, outperforming most of CO 2 -to-CO conversion electrolyzers. By expanding the cell area to 100 cm 2 , this catalyst sustains a high-current electrolysis at 10 A with 86.8% CO selectivity and the single-pass conversion can reach 40.4% at a high CO 2 flow rate of 150 sccm. This fabrication method can be scaled up with negligible decay in CO 2 -to-CO activity. In situ spectroscopy and theoretical results reveal the crucial role of coordinatively unsaturated metal-nitrogen sites, which facilitate CO 2 adsorption and key *COOH intermediate formation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2023
·Vol. 58
·期 13
·5808-5821
·
IF 4.5
Wu Wei,Wang Yueming,Sun Jiyu
Color changing can immediately activate system of vision, which bring corresponding monitoring function without delay. Traditional color-changing sensor is not competent for the detection of large area, low-cost and easy preparing. Inspired by adaptive coloring strategies of beetle elytra, angle dependent and humidity responsive color-changing films are achieved with large area through convenient and low-cost technics of spin-coating and self-leveling. When observed at different angles, L 2B , L 2P and L 3G acquired with NPAM and HEMA-co-MMA layers can bring color-changing expect L 3P . And L 3G also conducts humidity responsive color-changing with stability from green to purple in variation from 46%rh to 84%rh and reversibly changing from purple to green while from high to low humidity, which ascribed to transformation between dehydration and hydration of NPAM layer with hydrophilic groups. To characterize the durability and stability in microscale, nano-indentation technology was used to reveal the nanomechanical properties of cross-link networks for NPAM and HEMA-co-MMA films. It was found out that the hydrophilic groups of networks can carry hydrogen bonds to enhance cross-link characteristic and low separation performance. This research provides insights into the simple and efficient technology for preparing functional material that displays potential applications in industrial, agricultural and military fields. Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2023
·Vol. 14
·期 1
·1-17
·
IF 16.6
Fu Shunli,Chang Lili,Liu Shujun,Gao Tong,Sang Xiao,Zhang Zipeng,Mu Weiwei,Liu Xiaoqing,Liang Shuang,Yang Han,Yang Huizhen,Ma Qingping,Liu Yongjun,Zhang Na
Targeting tumour immunosuppressive microenvironment is a crucial strategy in immunotherapy. However, the critical role of the tumour lymph node (LN) immune microenvironment (TLIME) in the tumour immune homoeostasis is often ignored. Here, we present a nanoinducer, NIL-IM-Lip, that remodels the suppressed TLIME via simultaneously mobilizing T and NK cells. The temperature-sensitive NIL-IM-Lip is firstly delivered to tumours, then directed to the LNs following pH-sensitive shedding of NGR motif and MMP2-responsive release of IL-15. IR780 and 1-MT induces immunogenic cell death and suppress regulatory T cells simultaneously during photo-thermal stimulation. We demonstrate that combining NIL-IM-Lip with anti-PD-1 significantly enhances the effectiveness of T and NK cells, leading to greatly suppressed tumour growth in both hot and cold tumour models, with complete response in some instances. Our work thus highlights the critical role of TLIME in immunotherapy and provides proof of principle to combine LN targeting with immune checkpoint blockade in cancer immunotherapy.
✓ 已验证
DOI
PubMed
高影响因子
CELLULOSE
·
2023
·Vol. 30
·期 8
·5171-5185
·
IF 5.7
Zhao Bencheng,Li Chengze,Chen Yongfang,Tian Qiong,Yurekli Yılmaz,Qiu Fengxian,Zhang Tao
To handle the increasingly harsh living space caused by extreme temperatures and floods of electromagnetic waves, wearable materials have been attracting much attention for decades due to their good versatile compatibility and precise utility. In this work, a Janus MXene/cellulose/ZnO nanorods membrane for accurate on-demand personal thermal management and electromagnetic interference shielding was fabricated via hydrothermal treatment and vacuum-assisted filtration, followed by a hydrophobization process. The ZnO nanorod side of obtained Janus membrane exhibits a high visible reflectance (96.3%) and infrared emissivity in the atmospheric window band (0.837). The corresponding visible absorption and average infrared reflectivity (5–25 μm in wavelength) of the MXene side are over 90% and 0.7, respectively. Remarkable temperature differences on both sides (7 °C increment on MXene side and 5 °C reduction on ZnO side compared to bare wooden board) were achieved in the validation test under direct sunshine, reflecting to the great optical properties and radiative thermal management performances of the obtained membrane. Moreover, the water contact angles (≥ 120°) indicated the hydrophobicity and associated stain resistance of this membrane. Active Joule heating and electromagnetic interference shielding characteristics have been successfully introduced into the Janus membrane by means of the integration of MXene. A rapid increase in temperature to 75 °C was attained within a 1 min of low voltage (2 V) applying. The effectiveness of the electromagnetic shielding (~ 30 dB) was higher than the commercial shielding materials. The results in general, provide a promising solution to protecting people from temperature extremes and electromagnetic waves interference in modern living space.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2023
·Vol. 190
·期 5
·1-9
·
IF 5.7
Li Xinxin,Zhang Meiling,Zhang Hua,Wang Zhenxin,Zhang Huimao
A simple fluorescence resonance energy transfer (FRET) sensing platform (termed as USP), comprised of upconversion nanoparticles (UCNPs) as the energy donor and Cy5 as the energy acceptor, has been synthesized for cathepsin B (CTSB) activity detection in vitro and in vivo. When Cy5-modified peptide substrate (peptide-Cy5) of CTSB is covalently linked on the surface of UCNPs, the FRET between the UCNPs (excitation: 980 nm; emission: 541 nm/655 nm) and Cy5 (excitation: 645 nm) leads to a reduction in the red upconversion luminescence (UCL) signal intensity of UCNPs. Cy5 can be liberated from UCNPs in the presence of CTSB through the cleavage of peptide-Cy5 by CTSB, leading to the recovery of the red UCL signal of UCNPs. Because the green UCL signal of UCNPs remains constant during the CTSB digestion, it can be considered as an internal reference. The findings demonstrate the ability of USP to detect CTSB with the linear detection ranges of 1 to 100 ng·mL −1 in buffer and 2 × 10 3 to 1 × 10 5 cells in 0.2 mL cell lysates. The limits of detection (LODs) are 0.30 ng·mL −1 in buffer and 887 cells in 0.2 mL of cell lysates (S/N = 3). The viability of USP to detect CTSB activity in tumor-bearing mice is has further been investigated using in vivo fluorescent imaging. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMISTRY AND TECHNOLOGY OF FUELS AND OILS
·
2023
·Vol. 59
·期 1
·192-201
·
IF 0.6
Tang Yajuan,Wang Hongmei,Gao Shanshan,Han Dan,Du Jinxiu,Wang Rui,Liu Yikun,Qu Guohui
The use of highly mineralized reinjection water has low gel strength and poor stability, and the above problems are more prominent under high-temperature reservoir conditions. Based on the temperature resistance and salt tolerance polymer TSRP and phenolic resin crosslinking agent, a TSRP temperature resistant weak gel system suitable for high mineralized reinjection water was developed, and the temperature resistance mechanism of the TSRP weak gel system was tested by its temperature resistance and injection ability. The migration, retention, and plugging of the TSRP weak gel system in heterogeneous reservoirs were studied through micropore throat migration and plugging characteristics and dual-pipe parallel oil displacement experiments. The results showed that: under the condition of polymer concentration 2000 mg/L, polymer: crosslinking agent: glue promoter 1:1.5:1, the TSRP weak gel system prepared by using mineralized 12132.9 mg/L reinjection water can remain stable after 95°C aging at high temperature of TSRP. Through microscopic simulation, a glass etching model TSRP weak gel system showed good migration ability and plugging performance. In comparison with the two pipes parallel oil displacement experiment, the KY gel system injected the same amount of PV at 95°C and 20000 mg/L in the Y1L block, the average recovery of the TSRP gel system increased by 22.3% after injection of polymer gel, and the KY gel system was only 18.2%; When the same amount of PV was injected in Z1L block, 95°C and 22000 mg/L, the average recovery of TSRP gel system increased by 24.35% after injection of polymer gel, and the KY gel system was only 17.15%, that is, under higher salinity, the TSRP gel system showed better performance.
✓ 已验证
产品关联
DOI
高影响因子
Nature Energy
·
2023
·Vol. 8
·期 5
·526-535
·
IF 56.7
Zhou Jiazheng,Xu Xiao,Wu Huijue,Wang Jinlin,Lou Licheng,Yin Kang,Gong Yuancai,Shi Jiangjian,Luo Yanhong,Li Dongmei,Xin Hao,Meng Qingbo
The control of the phase evolution during the selenization of kesterite Cu 2 ZnSn(S,Se) 4 (CZTSSe) is crucial for efficient solar cells. Here, we regulate the phase-evolution kinetics of Ag-alloyed CZTSSe by applying a positive pressure in the reaction chamber at the initial stage of the annealing process. The partial pressure of Se decreases, reducing the collision probability between selenium molecules and the kesterite precursor during the initial formation of the crystals. This results in the precursor transforming into CZTSSe in a single step, without the formation of secondary phases. CZTSSe forms at relatively higher temperature than conventional methods, leading to high-crystallinity kesterite films with fewer defects. We demonstrate solar cells with a total area efficiency of 14.1% and a certified total area efficiency of 13.8%. This work provides insights into the selenization mechanism and phase evolution of kesterite absorbers, enabling efficient solar cells.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2023
·Vol. 14
·期 1
·1-13
·
IF 16.6
Zhang Guangzhao,Chang Jian,Wang Liguang,Li Jiawei,Wang Chaoyang,Wang Ruo,Shi Guoli,Yu Kai,Huang Wei,Zheng Honghe,Wu Tianpin,Deng Yonghong,Lu Jun
The electrochemical stability window of the electrolyte solution limits the energy content of non-aqueous lithium metal batteries. In particular, although electrolytes comprising fluorinated solvents show good oxidation stability against high-voltage positive electrode active materials such as LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811), the ionic conductivity is adversely affected and, thus, the battery cycling performance at high current rates and low temperatures. To address these issues, here we report the design and synthesis of a monofluoride ether as an electrolyte solvent with Li-F and Li-O tridentate coordination chemistries. The monofluoro substituent (-CH 2 F) in the solvent molecule, differently from the difluoro (-CHF 2 ) and trifluoro (-CF 3 ) counterparts, improves the electrolyte ionic conductivity without narrowing the oxidation stability. Indeed, the electrolyte solution with the monofluoride ether solvent demonstrates good compatibility with positive and negative electrodes in a wide range of temperatures (i.e., from −60 °C to +60 °C) and at high charge/discharge rates (e.g., at 17.5 mA cm −2 ). Using this electrolyte solution, we assemble and test a 320 mAh Li||NCM811 multi-layer pouch cell, which delivers a specific energy of 426 Wh kg −1 (based on the weight of the entire cell) and capacity retention of 80% after 200 cycles at 0.8/8 mA cm −2 charge/discharge rate and 30 °C.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2023
·Vol. 34
·期 7
·1-12
·
IF 2.8
Zhang Xinle,Chi Qingguo,Tang Chao,Li Hua,Zhang Changhai,Li Zhonghua,Zhang Tiandong
The rapidly growing third-generation wide-band-gap semiconductor electronic device industry urgently requires high-temperature-resistant packaging materials. However, the epoxy molding compound materials cannot suffer the high-temperature working condition due to the intrinsic molecular chain structure of epoxy materials (EP). In this paper, bisphenol A-type cyanate (BADCy) with triazine ring structure was introduced into EP to improve its heat resistance. The curing reaction as well as the curing mechanism has been clearly revealed for BADCy/EP with different contents of BADCy according to the Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimeter (DSC) results. In the whole copolymer system, the copolymer at higher BADCy concentration (50–60 mol%) achieved the highest crosslink density (12.8 × 10 –3 mol/cm 3 ), thus, showing excellent glass transition temperature (> 200 °C) and thermal decomposition temperature( T 5% > 400 °C). The heat resistance and electrical insulation property of BADCy/EP system have been systematically investigated, and a balance between high heat resistance and good electrical insulation are achieved at 66 mol% BADCy content, where the glass transition temperature reaches 215 °C, which is 73 °C higher than that of the EP system of anhydride copolymer. The volume resistivity of 1.5 × 10 15 Ω·m and dielectric constant of 3.3 is obtained, indicating excellent electrical insulation and dielectric properties of BADCy/EP. This work provides a facile and efficient strategy to improve the overall properties of EP by optimizing the molecular chain structure.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2023
·Vol. 34
·期 10
·1-12
·
IF 2.8
Zhao Jiaqi,Hu Chen,Fang Jiapeng,Sun Ruyi,Lu Jingyao,Su Shikun,Lei Zonghao,Fang Pengfei,Feng He,Degao Zhong,Teng Bing
In this work, a series of iso-structural eulyite-type Ba 3 Yb(PO 4 ) 3 :Tb 3+ solid solution phosphors were synthesized via high-temperature solid-phase method. The corresponding unit cell structure, luminescence properties, thermal stability, and chromaticity coordinates of the as-obtained phosphors were systematically investigated. The crystal structure of Ba 3 Yb(PO 4 ) 3 :Tb 3+ was refined by GSAS program, which indicates the oxygen ions in Ba 3 Yb(PO 4 ) 3 are disordered at one C3 site, and the oxygen atoms are distributed at two sites. Under 378 nm ultraviolet excitation, the emission peak of Ba 3 Yb(PO 4 ) 3 :Tb 3+ appears in the range of 450–650 nm, and a characteristic green emission peak appears at 542 nm. Moreover, the luminous intensity of the Ba 3 Yb(PO 4 ) 3 :14 at.% Tb 3+ sample at 160 °C is 87.7% at room temperature, and the quantum yield is 55.8%, which reveals good thermal stability. Our results suggest that the Ba 3 Yb(PO 4 ) 3 :Tb 3+ phosphors are promising high-efficiency green light conversion materials for UV-LED applications.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）