CRYSTENGCOMM
·
2023
·Vol. 25
·期 38
·5452-5460
·
IF 3.1
Huimin Du,Yunhao Liang,Xingzuo Liu,Yue Deng,Jie Yang,Jun Yang,Shanshan Hu
Yb2(MoO4)3:Ln3+ (Ln = Ho, Tm, Er) phosphors were synthesized by a hydrothermal method with further calcination. The crystal structure and morphology of the samples were characterized by X-ray diffraction and scanning electron microscopy. The effects of rare earth ion interaction in the Yb2(MoO4)3:Ln3+ phosphors on the upconversion (UC) luminescence properties and energy transfer process at different doping concentrations were discussed. It is concluded that by doping Ho3+, Tm3+, and Er3+ in the Yb2(MoO4)3 host, the phosphors emit orange-yellow, blue and green light, respectively, and the energy transfer from Yb3+ → Ho3+/Er3+ and Yb3+ → Tm3+ is a two and three photon process, respectively. Under the excitation of a 980 nm laser, by changing the Ho3+/Tm3+ ratio in doped Yb2(MoO4)3, we have realized the transition of phosphors from cold white light to warm white light. The temperature sensitivity of the 2H11/2 and 4S3/2 energy levels of Yb2(MoO4)3:Er3+ in the range of 323–573 K was studied by the FIR technology. The experimental results show that the maximum absolute sensitivity was 0.0081 K−1 at 573 K and the maximum relative sensitivity was 0.01 K−1 at 323 K. Compared with other materials, the Er3+ doped Yb2(MoO4)3 phosphor is an excellent optical temperature sensing material.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER TESTING
·
2023
·
IF 5.1
Wei Chen,Zewen Wu,Xingyang He,Ying Su,Gehua Zheng,Sang-Keun Oh,Can Mei
Exposure of steel to harsh marine environment can cause serious corrosion, which significantly affects its durability. In this study, a novel two-dimensional MXene nanosheets were functionalized with 3-methacryloxy propyl trimethoxysilane (γ-MPS@MXene) followed by introducing into the vinyl ester resin (VER) through solution blending method to enhance the anti-corrosion properties of the coatings. The effects of γ-MPS@MXene incorporation on the mechanical properties, thermal stability, dynamic thermo-mechanical properties, UV aging resistance, anti-corrosion properties of the VER nanocomposites were systematically investigated. The optimum tensile strength, elastic modulus, hardness, thermal stability and UV aging resistance of γ-MPS@MXene VER nanocomposites can be achieved when composited with 0.08 wt% γ-MPS@MXene. The electrochemical impedance spectroscopy(EIS) results demonstrate the introduction of γ-MPS@MXene nanosheets into the VER enhanced the anti-corrosion properties of the composites coating remarkablely and the anti-corrosion mechanism was also revealed. The favourable interfacial interaction between γ-MPS@MXene and VER matrix through covalent cross-linking diminished interfacial defects of the composite coating and was also beneficial to enhancement of the compatibility, the well-dispersed γ-MPS@MXene in VER created a “labyrinth effect”, which prolonged the diffusion path of corrosive medium to the carbon steel substrate. This research provides a promising strategy for the fabrication of heavy anti-corrosion nanocomposite resin coatings, which can realize long-term corrosion protection of metal substrates.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Xiaoyun Chen,Huizhi Sun,Dong-Hau Kuo,Adugna Boke Abdeta,Osman Ahmed Zelekew,Yuanbo Guo,Jubin Zhang,Zhanhui Yuan,Jinguo Lin
Photocatalytic H 2 O splitting by sulfide-based materials is a great challenge, because of the poor resilience of such materials against hole oxidation. Although sulfide ion of catalyst negatively shifts the valence band-edge relative to its oxide ion, the instability of sulfide ions during H 2 O oxidation is a critical obstacle to simultaneous evolution of H 2 and O 2 . Here, active, stable, and spherical nanoflower-like bimetal (Mo,Ni)(S,O) 3- x sulfo-oxide catalysts with a band gap of ∼2.1 eV and different concentrations of oxygen vacancy defects were synthesized for H 2 O splitting. (Mo,Ni)(S,O) 3- x of 25 mg with a suitable amount of oxygen vacancy defects could evolve 587.5 μmol/h H 2 under visible-light irradiation. This work demonstrated an example of converting an oxidation photocatalyst into a reduction one. Microstructure analysis showed that surface oxygen vacancy defects and the multiple-valence charges in Ni and Mo not only promoted effective separation, interface transfer, and reactions of photo-carriers but also reduced the charge build-up to avoid photo-corrosion during photocatalytic water decomposition.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2021
·
IF 7.514
Chao Zou,Ling Huang,Donghui Li,Yu Ma,Yixiang Liu,Yanbo Wang,Min-Jie Cao,Guang-Ming Liu,Lechang Sun
In this work, an enteric soluble alginate was proposed to improve the absorption efficiency of cyanidin-3-O-glucoside (C3G) through molecular self-assembly. Under the optimized conditions, the obtained low-viscosity alginate (LVA) was released completely during the simulated gastrointestinal digestion and an LVA–C3G complex with 84.2% binding efficiency was acquired. Fourier transform infrared spectroscopy displayed that the characteristic spectrum of C3G had disappeared after the LVA conjugation. Furthermore, based on the analysis of scanning electron microscopy and differential scanning calorimetry, a porous network structure and the shifted endothermic peak in the thermograms were observed, further confirming the formation of a complex between LVA and C3G. The results of simulated gastrointestinal digestion reveal that the LVA assembly significantly ( p < 0.05) improved the bioaccessibility of C3G. Correspondingly, the C3G level in mouse plasma was increased by 27.4% in the C3G-LVA group. This suggests the suitability of LVA as an oral delivery vehicle for dietary anthocyanins.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2021
·
IF 6.953
Ling Ding,Shen Song,Lele Chen,Jipeng Shi,Baotang Zhao,Guixiang Teng,Ji Zhang
In this work, an innovative composite hydrogel composed of curdlan (CD)/polyvinyl alcohol (PVA) hydrogels with a 3-d network structure was successfully prepared by freeze-thaw processing. The presence of interactions, changes in crystallinity, and thermal behaviour were investigated by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetry (TGA and DTG), respectively. The morphology of the hydrogels was investigated by scanning electron microscopy (SEM). With the increase of PVA concentration, the composite hydrogel had a greater mechanical strength while remaining remarkably ductile as evinced by tensile test results. PVA content affects the swelling and water retention of CD/PVA hydrogels. The results of CCK-8 assay showed that CD/PVA hydrogels have no cytotoxic effect on the mouse fibroblast L929 cells. The AO/EB double-staining experiment further proved that the cells in the composite hydrogels had good cytocompatibility. The porous biohydrogels developed in the present work can provide an ideal cell growth environment as a scaffold. CD/PVA hydrogels highlight the value of this system for cell adhesion and proliferation, and further soft tissue engineering application.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2021
·
IF 5.302
Wei Xie,Qiangang Fu,Chunyu Cheng,Pei Zhang,Ningning Yan
The medium-entropy oxide (Y 1/3 Yb 1/3 Lu 1/3 ) 2 O 3 with a body-centered cubic structure was successfully synthesized by solid-state reaction process, and then it was introduced into SiC ceramic to study its effect on the oxidation behavior of SiC ceramic at 1700 °C. The (Y 1/3 Yb 1/3 Lu 1/3 ) 2 O 3 -modified SiC ceramic exhibited better oxidation resistance than its individual oxides (Y 2 O 3 , Yb 2 O 3 , and Lu 2 O 3 ) modified SiC ceramic. The experimental and calculated results all indicate that the rare-earth atoms had the tendency to diffuse into the SiO 2 structure and occupy the interstitial positions within SiO 2 structure. The introduction of medium-entropy oxide (Y 1/3 Yb 1/3 Lu 1/3 ) 2 O 3 reduced the initial oxidation rate of the ceramic samples (1−3 h), and enhanced the stability of SiO 2 structure, thus resulting in a better oxidation resistance at 1700 °C.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2021
·
IF 5.268
Juan Han,Wenrui Huang,Man Zhao,Jiacong Wu,Yuanyuan Li,Yanli Mao,Lei Wang,Yun Wang
Herein, a glucose [email protected] composite (3-MPBA/ [email protected] ) with enhanced enrichment was enabled the rapid encapsulation of glucose oxidase (GOx) into microporous zeolitic imidazolate framework-8 (ZIF-8) for the first time. The 3-MPBA/ [email protected] not only has improved affinity and catalytic efficiency to the substrate but also can shorten the formation time. The optimum loading amount of GOx on ZIF-8 was determined to be 470 mg/g. The as-prepared 3-MPBA/ [email protected] composite maintained the native conformation of the enzyme and showed excellent bioactivity, even in chemical agents or at high temperature. Furthermore, the 3-MPBA/ [email protected] showed satisfactory reusability, preserving almost 80.8 % activity after 7 cycles. The Michaelis constant K m and specificity constant k cat / K m of the 3-MPBA/ [email protected] were 0.03 ± 0.02 mM and 63.87 ± 1.96 s −1 mM −1 , respectively, which were superior to corresponding values of free GOx. Therefore, the 3-MPBA/ [email protected] displayed high catalytic efficiency, high loading efficiency and enhanced stability. Moreover, a new type of visual colorimetric sensor for screening of the diabetes was realized through the 3-MPBA/ [email protected] , which provided a new strategy for the analysis field of glucose.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2021
·
IF 6.901
Wenhao Ren,Yun Huang,Saisai Li,Junyuan Gan,Jun Yang,Xing Li,Mingshan Wang,Haijun Cao
Lithium metal has been considered as a potential replacement for the commercialized graphite anode to further boost the energy density of Li-ion batteries. However, Li dendrite growth during Li plating/stripping causes safety concern and poor lifespan of Li metal batteries (LMBs). In addition, the deploy of Ni-rich high-loading LiNi x Co y Mn 1-x-y O 2 (NCM, 0.6 ≤ x ≤ 0.95) is also an efficient way for boosting energy density. However, the dissolution of transition metal ion and structure evolution during cell operation can leave an adverse effect on cell performances. Herein, dual-functional 3-thiopheneboronic acid (TB) additive is used to form a lithium borate-rich solid electrolyte interphase (SEI) on Li anode and an improved cathode electrolyte interphase (CEI) on Ni-rich cathode. The TB-induced SEI layer is conductive and stable, and thus beneficial to improving kinetic limitation of Li nucleation and obtain a uniform morphology of Li deposition. When the TB-protected Li metal anode matches the high-loading LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NMC622) cathode (13.65 mg cm −2 ), high initial capacities of 163.78 mAh g −1 (2.23 mAh cm −2 ) at 0.2 C and 164.82 mAh g −1 (2.25 mAh cm −2 ) at 0.5 C after activation are obtained, attributing to the effective SEI and stable CEI induced by TB. This strategy of introducing additives into LMB system with Ni-rich high-loading NMC cathode affords an emerging energy storage system to demonstrates the material engineering of batteries with very high energy density.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2021
·
IF 9.078
Hafezeh Nabipour,Xin Wang,Lei Song,Yuan Hu
Organic-inorganic hybrid flame retardant technology integrates independent ingredients into a whole, thus showing advantage of simultaneous improvement in flame retardant, smoke suppressant and mechanical properties of polymers over traditional flame retardants. In this work, a novel organic-inorganic hybrid flame retardant denoted as IR-MOF-3-Mel was synthesized by covalent hybridization of isoreticular metal-organic framework-3 (IR-MOF-3) with melamine. A relatively low amount of IR-MOF-3-Mel nanoparticles dramatically decreased the fire risk of epoxy resin (EP). Specifically, the EP with only 2.0 wt% of IR-MOF-3-Mel achieved a limiting oxygen index (LOI) of 30.5% as well as a UL-94 V-0 classification, whereas its counterpart with 2.0 wt% of IR-MOF-3 showed a LOI of 25.0% and no classification in UL-94 test. Furthermore, the peak heat release rate , total heat release and smoke production rate of the EP with 2.0 wt% of IR-MOF-3-Mel was declined by 74.0%, 71.4% and 35.6%, respectively, compared to neat EP. Additionally, the glass transition temperature , the tensile strength , and the young's modulus were 11 °C, 38%, and 27% higher than those of neat EP, respectively. The flame retardant mechanism analysis clarified that IR-MOF-3-Mel contributed to formation of a char layer with a high level of thermal resistance and graphitization which accounted for significantly reduced fire risks.
✓ 已验证
产品关联
DOI
高影响因子
BIOELECTROCHEMISTRY
·
2020
·
IF 4.722
Guiyin Li,Huafu Feng,Xiaohang Shi,Min Chen,Jintao Liang,Zhide Zhou
Glypican-3 (GPC3) is a highly specific tumor marker for hepatocellular carcinoma (HCC), and plays an important role in reflecting the existence, therapeutic evaluation, monitoring and prognosis of HCC. Herein, an electrochemical aptasensor was designed for GPC3 detection with the reduced graphene oxide-hemin nanocomposites (RGO-Hemin) modified on the screen-printed electrode surface as the sensing platform and GPC3 aptamer as recognize molecule. In the existence of GPC3, the aptamer can specifically bind with the target GPC3 and form GPC3-aptamer conjugations on the sensing surface, which would increase the resistance of the electron transfer on the electrode and make the decrease of electrochemical signals of Hemin in RGO-Hemin nanocomposites. The electrochemical current change was recorded by differential pulse voltammetry (DPV). Scanning electron microscopy (SEM), Raman microscope (RM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the GPC3 electrochemical aptasensor. Under the optimum conditions, the current response of the electrochemical aptasensor is linearly correlated with the concentration of GPC3 (0.001–10.0 μg/mL) with the detection limit of 2.86 ng/mL (S/N = 3) and the sensitivity of 0.134 μA/μM/cm 2 . In addition, the aptasensor was applied to the determination of GPC3 in spiked human plasma and the recoveries fluctuated from 102.68% to 117.29%. All these results show that the aptasensor has good specificity, sensitivity, stability and reproducibility for GPC3 detection.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF FOOD BIOCHEMISTRY
·
2020
·Vol. 44
·期 10
·e13420
·
IF 1.662
Cheng Hu,Ying Chen,Yiyuan Cao,Yiqun Jia,Jiaqi Zhang
We investigated the protective effect of Hyperoside (HPS) on liver injury induced by acetaminophen (APAP) in C57 mice. HPS was administered orally for 7 days and APAP was administered orally on the 7th day. Serum and liver samples were then collected for biochemical analyses, histopathology assessments, and metabolomics studies. Metabolites were assessed using a UHPLC-MS system. Principal component analysis (PCA) and orthogonal partial least squares discriminant analysis (OPLS-DA) were used to process the data. Pathway analyses were performed using Metaboanalyst 4.0. Western blot and qRT-PCR were used to determine the protein and mRNA levels, respectively. HPS interacted with active sites in CYP2E1 and caused protein degradation. In conclusion, our results suggested that HPS prevented the oxidative stress-induced liver injury caused by APAP. Practical applications Hyperoside was shown to have potential protective and therapeutic effects against liver diseases. Male C57 mice were used to perform pharmacodynamic, pharmacology, and metabolomics evaluations. At a dose of 60 mg/kg, HPS prevented oxidative stress-induced liver injury caused by APAP by regulating the glutathione-related metabolites and enzymes through the inhibition of CYP2E1.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2020
·
IF 4.65
Yuebo Li,Haina Qi,Yunrui Xie,Liu Yang,Wensheng Yu,Qianli Ma,Xiangting Dong,Dan Li,Guixia Liu,Jinxian Wang
CaF 2 :Eu 2+/3+ one-dimensional nanostructures including nanofibers , hollow nanofibers and nanobelts are respectively constructed via a newly-proposed technique of high-efficient combination of electrospinning with bi-crucible fluorinating technique. The diameters of CaF 2 :Eu 2+/3+ nanofibers and hollow nanofibers are respectively 328 ± 2 nm and 290 ± 5 nm, and the width and thickness of nanobelts are 1.07 ± 0.013 μm and 150 nm, respectively. Under the excitation of 276-nm or 320-nm ultraviolet light, CaF 2 :Eu 2+/3+ nanostructures exhibit characteristic emission peaks at 385 nm (purple) and 615 nm (red) assigned to 4f 6 5 d 1 (t 2g )→ 8 S 7/2 energy levels transition of Eu 2+ ions and 5 D 0 → 7 F 2 energy levels transitions of Eu 3+ ions, respectively. XPS data further confirm the coexistence and proportion of Eu 2+ and Eu 3+ in the samples. CaF 2 :9%Eu 2+/3+ nanofibers possess the highest luminescent intensity. White-emitting and color-tunable photoluminescence performance of CaF 2 :Eu 2+/3+ nanostructures are realized by regulating the proportion of Eu 2+ to Eu 3+ ions, and luminescence mechanism is also proposed. Further, it is satisfactorily found that the proportion of Eu 2+ to Eu 3+ ions can be modulated by adjusting the Eu-doped concentration and calcination temperature. The detailed formation mechanisms of CaF 2 :Eu 2+/3+ one-dimensional nanostructures are advanced, and the neoteric fabrication technique is successfully established. This design conception and construction strategy can provide some guidance for fabricating other one-dimensional nanostructures.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）