Nano Energy
·
2020
·
IF 16.602
Qingyan Zhou,Zhen Zhang,Jiajun Cai,Bing Liu,Yunlong Zhang,Xiaofei Gong,Xulei Sui,Aiping Yu,Lei Zhao,Zhenbo Wang,Zhongwei Chen
Rational design and construction of highly efficient and durable non-noble-metal bifunctional catalysts for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is crucial to promote the widespread implementation of rechargeable Zn-air batteries. Herein, a bifunctional catalyst comprising Co nanoparticles uniformly embedded in hollow nitrogen doped carbon tubes (Co@hNCTs) is fabricated by a facile tube-directed templating strategy. In this strategy, surfactant-treated polypyrrole (PPy) nanotubes serve as the structure-guiding templates for efficient capture of Co 2+ , realizing the in-situ growth of zeolitic imidazolate frameworks-67 (ZIF-67) nanocrystals on PPy nanotubes . Sodium laurylsulfonate acts as anionic surfactant to endow PPy nanotubes with functional electronegative surface and strong anchoring effect toward ZIF-67, playing the pivotal role in binding of ZIF-67 nanocrystals with PPy nanotubes potently. Consequently, the developed catalyst presents a superior ORR activity with the half-wave potential of 0.87 V excellent durability with only a 7 mV loss of half-wave potential after 5000 cycles. The catalyst also exhibits superior catalytic performance for OER. When serving as an air electrode in Zn-air batteries, a large power density of 149 mW cm −2 and long-term cyclability for over 500 h are realized in ambient air, implying the great potential in practical application.
研究领域:
材料科学
·
电化学
·
能源存储
·
催化化学
·
纳米材料
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2017
·Vol. 44
·期 6
·5842-5847
·
IF 2.986
Lirong Yang,Chunmei Wang,Zhigang Liu,Xiaoyu Liu,Yang Song,Xiaoxin Feng,Baoqiang Zhang
Anatase TiO 2 coatings prepared by solvothermal process in a neutral ethanol solution of isopropyl titanate at 160 °C have been grown on slag wool fibers (SWF) which were modified by hexadecyltrimethylammonium bromide (CTAB) in advance. X-ray diffraction patterns confirmed the coatings are of a nanocrystalline anatase structure, and scanning electron microscopy observations and energy-dispersive X-ray spectrum revealed a continuous coverage of TiO 2 formed on the fiber surfaces. The photocatalytic activity of the samples was tested by the photocatalytic degradation of methylene blue (MB) solution. The results show that CTAB modified slag wool fibers (CMSWF) are not a suitable adsorbent for MB due to their weaker negative surface charges. Anatase TiO 2 coated CMSWF display higher photocatalyst activity than anatase TiO 2 coated SWF without CTAB modification, and Anatase TiO 2 coated CMSWF are relatively stable under UV-light irradiation.
研究领域:
材料科学
·
环境功能材料
·
表面改性
·
光催化
·
纳米涂层
✓ 已验证
DOI
高影响因子
Energy & Environmental Materials
·
2022
·Vol. 6
·期 5
·e12415
·
IF 13.443
Lin Chen,Jingwen Zhou,Junxiang Zhang,Guicai Qi,Bin Wang,Jianli Cheng
High energy density Li-CO 2 batteries have attracted much attention owing to the “two birds with one stone” feature in fixing greenhouse gas CO 2 and providing renewable energy. However, poor reversibility of the discharge product Li 2 CO 3 is one of the main problems that limit its application, resulting in poor cycling stability and severe polarization. Herein, copper indium sulfide (CIS), a semiconducting non-precious metal sulfide, is fabricated as cathode catalysts for high-performance Li-CO 2 batteries. Combined with the synergistic effect of bimetallic valence bonding and coordinated electron transfer, Li-CO 2 batteries using CIS cathodes exhibit high full specific discharge capacity, excellent rate capability and cycle stability, namely it delivers a high specific full discharge capacity of 8878 μAh cm −2 , runs steadily from 10 to 100 μA cm −2 , and performs a stable long-term cycling behavior (>1050 h) under a high energy efficiency of 84% and a low charge voltage of approximately 3.4 V at 20 μA cm −2 within 100 μAh cm −2 . In addition, a flexible Li-CO 2 pouch cell is constructed to reveal the potential of employing CIS to fabricate flexible high energy storage devices in practical applications. This work shows a promising development pathway toward next-generation sustainable energy storage devices.
研究领域:
电化学
·
能源材料
·
纳米催化
·
可持续能源存储
·
金属-气体电池
✓ 已验证
DOI
高影响因子
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
·
2013
·Vol. 66
·期 1
·133-138
·
IF 1.66
Peng Shusen,Zhao Wenjie,Zeng Zhixiang,Li He,Xue Qunji,Wu Xuedong
In this report, hybrid silica sol–gel coating was prepared using Ce(NO 3 ) 3 (Sol-Ce) as catalyst. Structure, surface morphology and anticorrosion ability of Sol-Ce solution/coating were studied by infrared spectroscopy (IR), scanning electron microscopy, energy dispersive spectrometer (EDS), potentiodynamic scan (PDS) and electrochemical impedance spectroscopy (EIS). IR results showed that Ce(NO 3 ) 3 had a stronger influence on reactivity of alkoxysilane. EDS results revealed that the fraction of Fe in Sol-Ce coating was significantly lower than regular acid-catalyzed hybrid silica sol–gel coating (Sol-Ac) and Sol-Ac with Ce(NO 3 ) 3 -doped coating (Sol-Ac/Ce). The results of PDS and EIS demonstrated that Sol-Ce coating had better anticorrosion ability than Sol-Ac and Sol-Ac/Ce on carbon steel. The enhanced anticorrosion performance of the Sol-Ce coating might result from the following two reasons: (a) Ce(NO 3 ) 3 as a catalyst could alleviate the negative effects of low pH with using acid catalyst (dissolution of carbon steel) and (b) Ce(NO 3 ) 3 could impede corrosion of carbon steel as corrosion inhibitor.
研究领域:
材料科学
·
表面工程
·
腐蚀与防护
·
无机化学
·
电化学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 27
·20741-20746
·
IF 3.84
Ge Sheng,Guiyun Xu,Shenghao Xu,Shiying Wang,Xiliang Luo
A conducting polymer based composite material of poly(3,4-ethylenedioxythiophene) (PEDOT) doped with pure insoluble ionic liquid (IL), 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, was prepared through a cost-effective electrodeposition method. A very tiny amount of insoluble IL (less than 15 μL), containing 0.1 M conducting polymer monomer, was drop-coated on an electrode surface and then used for electropolymerization using a homemade electrochemical cell filled with aqueous supporting electrolyte. With this design, the consumption of expensive IL for the preparation of the PEDOT/IL composite was greatly reduced, and thus effectively reduced the cost. The prepared PEDOT/IL composite was found to be highly conductive and stable, and it exhibited a highly nanoporous microstructure and excellent electrocatalytic activity toward the oxidation of dopamine (DA). Based on the excellent stability and electrocatalytic activity of the PEDOT/IL nanocomposite, a highly stable, sensitive and selective DA sensor with a detection limit of about 51 nM was developed.
研究领域:
分析化学
·
生物传感器
·
纳米材料
·
电化学
·
神经化学
·
转化医学
✓ 已验证
DOI
高影响因子
CATALYSIS TODAY
·
2012
·Vol. 194
·期 1
·38-43
·
IF 3.407
An-Hua Liu,Ran Ma,Meng Zhang,Liang-Nian He
Carbon dioxide, being one of the major greenhouse gases responsible for global warming, its atmospheric level grows ever faster since the beginning of industrial era. Great efforts have been devoted to developing versatile technologies/processes to adjust and manipulate the rapid growth of CO 2 emission. Besides CO 2 capture and storage/sequestration (CCS) to control its emission, chemical utilization of the captured CO 2 (CCU) emerges to be a rational technique for economical benefits as well as environmental concerns. As for the aim of CO 2 utilization, an environmentally benign CO 2 /water reversible acidic system was developed for the copper (II)-catalyzed selective oxybromination of electron-rich aromatics without the need of any conventional acid additive and organic solvent. Notably, up to 95% yields of the bromination products were attained with good regio-selectivity when cupric bromide was used as the catalyst and lithium bromide as a cheap and easy handling bromine source under supercritical CO 2 . The catalytic system worked well for electron-rich aromatics including ethers, sulfides and mesitylene. Carbonic acid in situ formed from CO 2 and water is supposed to act as the proton donator in the Brønsted acid-promoted reaction. Notably, CO 2 in this study serves as a reaction medium and a promoter in conjunction with water and also provides safe environment for aerobic reactions. Given with excellent reaction efficiency as well as no need of neutralization disposal, this process thus represents an environmentally friendly approach for aerobic bromination of aromatics with essential reduction of CO 2 emission as well as an economically beneficial way for application of captured CO 2 .
研究领域:
有机化学
·
绿色化学
·
催化化学
·
环境化学
·
化学工程
·
二氧化碳资源化
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Jing Jiang,Wei Wei,Zhen Ren,Yang Luo,Xinzhi Wang,Ying Xu,Mingming Chang,Lunhong Ai
Developing efficient catalysts for the dehydrogenation of ammonia borane (AB) is important for the safe storage and controlled release of hydrogen, but it is a challenging task. In this study, we designed a robust Ru-Co 3 O 4 catalyst using the Mott-Schottky effect to induce favorable charge rearrangement. The self-created electron-rich Co 3 O 4 and electron-deficient Ru sites at heterointerfaces are indispensable for the activation of the B-H bond in NH 3 BH 3 and the O H bond in H 2 O, respectively. The synergistic electronic interaction between the electron-rich Co 3 O 4 and electron-deficient Ru sites at the heterointerfaces resulted in an optimal Ru-Co 3 O 4 heterostructure that exhibited outstanding catalytic activity for the hydrolysis of AB in the presence of NaOH. The heterostructure had an extremely high hydrogen generation rate (HGR) of 12238 mL min −1 g cat -1 and an expected high turnover frequency (TOF) of 755 mol H2 mol Ru -1 min −1 at 298 K. The activation energy needed for the hydrolysis was low (36.65 kJ mol −1 ). This study opens up a new avenue for the rational design of high-performance catalysts for AB dehydrogenation based on the Mott-Schottky effect.
研究领域:
催化化学
·
能源材料
·
纳米材料科学
·
表面科学
·
氢能源技术
✓ 已验证
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2022
·
IF 3.656
Liang Qin,Yan Li,Deyun Ma,Fenglan Liang,Lidian Chen,Chenyang Xie,Jiayong Lin,Yani Pan,Guizhen Li,Fenrou Chen,Peiru Xu,Canlin Hong,Jiaxing Zhu
Two transition metal-based MOFs , {[Ni 2 (pip) 2 (bimb) 1.5 ]·2(H 2 O)} n ( 1 ), and {[Zn(pip)(bimb)]·DMF} n ( 2 ) (pip = 5-phenyl-isophthalate, bimb = 1,4-bis(imidazole-1-ylmethyl)benzene) have been successfully prepared. Complex 1 displays a three-dimensional structure with a 7-connected svk topology with a point symbol of (3 3 ∙4 14 ∙5 3 ∙6). Complex 2 performs a two-dimensional (4,4) sql net with channels of 7.0 × 5.5 Å 2 and 10.5 × 4.7 Å 2 along the b and c axis, respectively. The magnetic result of 1 shows an antiferromagnetic coupling between the two metal centers. Desolvated 2 adsorbs around 15.25 wt% 5-fluorouracil (5-FU). The 5-FU was slowly released without any burst release. The degradation of methyl orange caused by oxidizing sulfate radicals (SO 4− ) in a Fenton-like process has also been explored.
研究领域:
无机化学
·
材料科学
·
药物递送
·
环境催化
·
配位化学
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2014
·Vol. 132
·期 7
·
IF 1.64
Pan Dongdong,Tian Hengshui
Soluble and thermally stable polycarbonate polyurethane elastomers were synthesized through a solvent-free and nonisocyanate melt transesterification process. The conditions of this process were studied, and the optimum conditions were as follows: the catalyst dibutyltin oxide dosage was 0.125 wt %, the raw material molar ( n ) ratio of dimethyl 1,6-hexamethylene dicarbamate (HDC) to poly(carbonate macrodiol) (PCDL) was n (HDC)/ n (PCDL) = 1:0.99, the reactants were prepolymerized under 100°C for 1 h and then under 185°C and a high vacuum for 4 h. Three different PCDLs were selected to participate in the reaction under the conditions mentioned previously, and their structures were characterized by Fourier transform infrared spectroscopy and X-ray diffraction. The products obtained from this process were still stable under 280°C. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132 , 41377.
研究领域:
高分子化学
·
生物材料
·
聚合物科学
·
材料化学
·
医用高分子
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 60
·48946-48953
·
IF 3.84
Tingting Yu,Lifen Liu,Qiao Yang,Jing Song,Fenglin Yang
Using the flat module membrane electrodes based on polyester filter modified with polyaniline (PANI)–phytic acid (PA), a new type of membrane bio-reactor (MBR) system is developed for both bio-electrochemical electricity generation and effluent filtration. A specifically prepared carbon foam–Fe–Co catalyst was coated on the conductive, filterable cathode membrane which makes it catalytic for enhancing cathodic oxygen reduction reaction and electricity generation. The cell voltage (with carbon foam–Fe–Co, 0.5–0.4 V) is superior to control test 1 (without any catalyst, 0.2 V), moreover, it is even better than control test 2 (with Pt–C catalyst, 0.5–0.3 V). The corresponding maximum power density of carbon foam–Fe–Co is 38.5 and 2.4 times higher than control test 1 and 2, respectively. More importantly, the base electrode materials and catalyst were both low-cost. The overall removal efficiency of COD and NH4+–N are satisfactory, at 95% ± 2.5% and 85% ± 2.5%, respectively. This integrated system is easy to scale up for practical application in waste-water treatment and offers a better option in operating and coupling MBR with bio-electricity generation.
研究领域:
环境工程
·
环境微生物学
·
电化学工程
·
水处理技术
·
生物电化学系统
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Ranxi Liang,Chaozhu Shu,Anjun Hu,Minglu Li,Zhiqun Ran,Ruixin Zheng,Jianping Long
The sluggish oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) kinetics greatly limit the development of lithium-oxygen (Li-O 2 ) batteries. Therefore, developing efficient electrocatalysts with high stability to boost oxygen involved reactions is particularly important for promoting the application of Li-O 2 batteries. Here, CoSe 2 @NiSe 2 heterostructure with distinct heterogeneous interfaces was fabricated via deliberate interface engineering. The formation of heterogeneous interface promotes local fine atomic array distortion that can act as an additional active site of ORR/OER. In addition, CoSe 2 @NiSe 2 with a distinct heterogeneous interface is favorable for the formation of built-in electric field during charging/discharging to enable electrodes with fast electrical transfer rates and reaction kinetics. Synergistically, the additional active sites brought by the fine atomic array distortion are highly conducive to the reversible formation and decomposition of the product. Undoubtedly, batteries with CoSe 2 @NiSe 2 exhibit excellent discharge/charge capacity (3530.1 mA h g −1 and 3485.6 mA h g −1 ), low overpotential (1.21 V) and excellent electrochemical stability for over 1200 h.
研究领域:
材料科学
·
电化学
·
能源化学
·
纳米催化
·
电池技术
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2017
·Vol. 42
·期 34
·22294-22301
·
IF 3.582
Jiang Li,Tianmu Lv,Nianjun Hou,Ping Li,Xueli Yao,Lijun Fan,Tian Gan,Yicheng Zhao,Yongdan Li
The effects of Mo doping into the B-site of La 0.3 Sr 0.7 TiO 3-δ perovskite on its ionic conductivity and catalytic activity as an anode material of solid oxide fuel cells have been investigated. The partial substitution of Ti by Mo reduces the bond energy between metal and oxygen ions in the perovskite. The concentration of Mo 5+ /Mo 6+ redox couples increases with the rise of the content of Mo, while the oxygen ionic conductivity decreases simultaneously. The doping of Mo significantly reduces the anodic polarization resistance and improves the performance of the single cell. The cell with La 0.3 Sr 0.7 Ti 0.97 Mo 0.03 O 3-δ anode and La 0.8 Sr 0.2 Ga 0.8 Mg 0.2 O 3-δ electrolyte exhibits a maximum power density of 135 mW cm −2 at 850 °C with hydrogen as fuel.
研究领域:
材料科学
·
电化学
·
能源材料
·
固态离子学
·
燃料电池技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）