RARE METALS
·
2019
·Vol. 38
·期 6
·588-600
·
IF 1.785
Huang Lei,Su Kun,Zheng Yu-Feng,Yeung Kelvin Wai-Kwok,Liu Xiang-Mei
A TiO 2 nanofilm was prepared on the surface of AZ31 magnesium alloy with controllable thickness through atomic layer deposition (ALD) technique, which can adjust the corrosion behaviors of AZ31 Mg alloy. Compared with the untreated Mg alloys, corrosion current densities ( i corr ) can decline by 58% in the 200-cycles TiO 2 -covered Mg alloy and further decline by up to 74% with the thickness of nanofilm up to 63 nm (400 cycles). The subsequent modification with a cross-linked conversion layer of 3-amino-propyltriethoxysilane (APTES) by a dipping method can produce a compact silane coating on TiO 2 nanofilm, which can seal pinholes of TiO 2 nanofilm and serve as a barrier to further adjust the corrosion behavior of the substrate. The i corr can decline about two orders of magnitude in the TiO 2 /silane composite coating. Making the adjustable corrosion rate come true, which can be attributed to the precise control on the thickness of metal oxide nanofilm and additional protection from the compact silane coating. In vitro study discloses that the TiO 2 /silane hybrid coating shows higher expression of alkaline phosphatase (ALP) and can promote cellular adhesion and proliferation with better cytocompatibility than untreated Mg alloy.
研究领域:
材料科学
·
生物医学工程
·
腐蚀科学
·
表面工程
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CLAY SCIENCE
·
2017
·
IF 3.101
Long Mao,Yuejun Liu,Huiqing Wu,Jianhong Chen,Jin Yao
Inspired by the versatile adhesion capability of marine adhesive proteins, core-shell structured polydopamine-coated layered double hydroxide (LDH@PDA) were prepared successfully by in-situ growing PDA on the surface of MgAl-LDH with a high aspect ratio . LDH@PDA/poly(ε-caprolactone) (PCL) nanocomposites were prepared by blending LDH@PDA and pure PCL via solution casting method to obtain homogeneous films. The results of thermal analysis confirmed that LDH@PDA can act as a nucleating agent . And thermal stability of nanocomposites was improved due to core-shell structured LDH@PDA. With incorporation of as low as 1 wt% of LDH@PDA, a 20% increase in tensile strength (41.1 MPa), 26% increase in elongation at break (772%) and 26% reduction in the oxygen relative permeability were achieved. The improvement in the mechanical and gas barrier properties of nanocomposites at low filler loading was attributed to the strong interfacial interaction of LDH@PDA wtih the PCL matrix.
研究领域:
高分子材料
·
纳米复合材料
·
生物医用材料
·
材料科学
·
表面改性
·
气体阻隔
·
力学性能
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2013
·
IF 3.365
Jing Cuan,Bing Yan
In our work, we achieve the multi-component assembly of novel kinds of photofunctional hybrid materials with polyoxometalates (POMs, Na 9 EuW 10 O 36 ·32H 2 O (EuW 10 O 36 9 - denoted as EuW10)) and benzoate (4-aminobenzoate, 4-hydroxybenzoate, 4-mercaptobenzoate) modified mesoporous silica through imidazolium ionic liquid (IL, 1-methyl-3-(trimethoxysilylpropyl) compound as double functional linkage. Using Pluronic P123 surfactant as a template, benzoate functionalized SBA-15 mesoporous host is synthesized as result of the co-condensation of tetraethoxysilane (TEOS) and benzoate modified siloxane as precursor. We fabricate POM into the framework of functionalized SBA-15 mesoporous silica with IL. Here IL behaves as double linkage, which both interact with PMO with electrostatic force through ion exchange and form covalent bond to the functionalized SBA-15 mesoporous silica through its alkoxy group after cohydroxylysis and copolycondensation process. Tb 3+ is further introduced into the above hybrid system through coordination bond to carboxylate group of benzoate unit, which can be expected to modify luminescence color and to obtain close white luminescence. The physical characterizations prove these hybrid materials possess high surface area, uniform mesoporous structure, good crystallization and relatively excellent luminescence properties.
研究领域:
无机化学
·
材料化学
·
纳米功能材料
·
光物理学
·
配位化学
·
溶胶-凝胶科学
·
稀土发光材料
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2017
·
IF 5.401
Huiqiang Wang,Zhanfang Ma
A new strategy for signal amplification was introduced in a label-free amperometric immunoassay platform. Improvements in the signal occurred following the oxidation of glucose by glucose oxidase and catalysis by polythionine of the produced H 2 O 2 from the previous oxidation reaction. In addition, a multifunctional conductive hydrogel, polypyrrole-polythionine-gold with glucose oxidase , was synthesised with a one-pot method using pyrrole and thionine as monomers, ammonium persulfate and HAuCl 4 as co-oxidant agents, and glucose oxidase as the doping agent. Combined with the hydrogel, a label-free amperometric immunoassay for the tumour marker neuron-specific enolase (NSE) was obtained. If operated at 0 V (vs. Ag/AgCl), the sensor exhibited a wide liner range from 100 ng mL −1 to 1 pg mL −1 and ultralow detection limit of 0.65 pg mL −1 (S/N = 3). The presented method was further used for the analysis of human serum samples and showed good consistency with detection results from an electrochemiluminescence immunoassay.
研究领域:
肿瘤学
·
免疫学
·
生物传感器
·
分子诊断
·
转化医学
·
临床检验医学
·
纳米生物技术
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Ying Jiang,Kai Chen,Jinping He,Yuxue Sun,Xiaorong Zhang,Xiaoxing Yang,Haiming Xie,Jun Liu
Composite solid electrolytes (CSEs), which combine the advantages of solid polymer electrolytes and inorganic solid electrolytes, are considered to be promising electrolytes for all-solid-state lithium metal batteries. However, the current CSEs suffer from defects such as poor inorganic/organic interface compatibility, lithium dendrite growth, and easy damage of electrolyte membrane, which hinder the practical application of CSEs. Herein, a CSE (PBHL@LLZTO@DDB) with polyurethane (PBHL) as the polymer matrix and Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) modified by silane coupling agent (DDB) as inorganic fillers (LLZTO@DDB) has been prepared. Disulfide bond exchange reactions between PBHL and LLZTO@DDB enable PBHL@LLZTO@DDB to form a dynamic three-dimensional (3D) inorganic/organic hybrid network, which promotes the uniform dispersion of LLZTO in PBHL@LLZTO@DDB, improves the Li + conductivity (1.24 ± 0.08 × 10 −4 S cm −1 at 30 ℃), and broadens the electrochemical stability window (5.16 V vs. Li + /Li). Moreover, a combination of hydrogen bonds and disulfide bonds endows PBHL@LLZTO@DDB with excellent self-healing properties. As such, both all-solid-state symmetric and full cells exhibit excellent cycle performance at ambient temperature. More importantly, the healed PBHL@LLZTO@DDB can almost completely restore its original electrochemical properties, indicating its application potential in flexible electronic products.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
固态离子学
✓ 已验证
DOI
高影响因子
Small
·
2019
·Vol. 15
·期 48
·1901527
·
IF 10.856
Zhaofeng Zhai,Bing Leng,Nianjun Yang,Bing Yang,Lusheng Liu,Nan Huang,Xin Jiang
Tremendous demands for highly sensitive and selective nonenzymatic electrochemical biosensors have motivated intensive research on advanced electrode materials with high electrocatalytic activity. Herein, the 3D-networked CuO@carbon nanowalls/diamond (C/D) architecture is rationally designed, and it demonstrates wide linear range (0.5 × 10 −6 –4 × 10 −3 m ), high sensitivity (1650 µA cm −2 m m −1 ), and low detection limit (0.5 × 10 −6 m ), together with high selectivity, great long-term stability, and good reproducibility in glucose determination. The outstanding performance of the CuO@C/D electrode can be ascribed to the synergistic effect coming from high-electrocatalytic-activity CuO nanoparticles and 3D-networked conductive C/D film. The C/D film is composed of carbon nanowalls and diamond nanoplatelets; and owing to the large surface area, accessible open surfaces, and high electrical conduction, it works as an excellent transducer, greatly accelerating the mass- and charge-transport kinetics of electrocatalytic reaction on the CuO biorecognition element. Besides, the vertical aligned diamond nanoplatelet scaffolds could improve structural and mechanical stability of the designed electrode in long-term performance. The excellent CuO@C/D electrode promises potential application in practical glucose detection, and the strategy proposed here can also be extended to construct other biorecognition elements on the 3D-networked conductive C/D transducer for various high-performance nonenzymatic electrochemical biosensors.
研究领域:
生物医学工程
·
纳米医学
·
电化学传感
·
生物传感器
·
材料科学
·
分子诊断
·
转化医学
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Shijie Sun,Baijin Li,Wei Xiong,Boyu Fu,Yong Zhang,Zilin Ruan,Lei Gao,Xiaoqing Zuo,Jianchen Lu,Jinming Cai
Supramolecular self-assembly offers a feasible route for nanopatterning and functionality. The construction and precise control of selective adsorption at the molecular scale play essential roles in fundamental sciences and practical applications. Molecular tiling such as trihexagonal tiling Kagome networks has potential promising chemical and physical properties. Distorted Kagome-like networks controllable fabrication is possible by coupling molecular functional groups and substrate atoms. A chiral Kagome-like network was constructed using IFDO ([1,2-b]fluorene-6,12-dione) as precursor molecules complemented with molecular beam epitaxy and annealing strategies. Revealing arrangements of the assembled network of O-Cu metal coordination linked Kagome-like networks on the Cu(1 1 1) surface and their assembly mechanisms and cavity characteristics were explored in detail through scanning tunneling microscopy combined with density functional theory. Based on the electronic state difference between the hole center of the network and the molecular backbone, the host–guest network was successfully prepared by co-depositing C 60 molecules. Kagome-like networks could as an efficient template for regulating the adsorption configuration of C 60 . Our results demonstrate a controllable and efficient method to design atomically precise ordered host–guest assemblies on solid surfaces, advancing the approach is yet another step toward the fabrication of molecular devices.
研究领域:
表面科学
·
纳米材料学
·
超分子化学
·
凝聚态物理
·
分子自组装
·
扫描探针显微学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2014
·Vol. 5
·期 8
·5604-5610
·
IF 3.708
Mei Yu,Jindan Zhang,Songmei Li,Yanbing Meng,Jianhua Liu
The performances of photovoltaic devices can be improved by increasing light-harvesting and charge collection respectively. The design and synthesis of nanocomposites with the ability of enhancing the generation and collection of the photo-generated electrons provide a significant way to improve the power conversion efficiency (PCE). Herein, SWNTs@(TiO2/Ag/Au) nanocomposites were synthesized and successfully integrated into photoanode films of dye-sensitized solar cells (DSSCs) to improve the power conversion efficiency. The synthesis processes were based on multi-functional DNA. DNA not only works as a dispersing agent preventing SWNTs bundling but also as a sacrificial mold assembling TiO2, Ag and Au nanoparticles on the surface of the SWNTs. The synthesized SWNTs@(TiO2/Ag/Au) nanocomposites enhance the charge collection and light-harvesting of DSSCs simultaneously. With 2.45 wt% SWNTs@(TiO2/Ag/Au) nanocomposites incorporating into the photoanode films, the PCE of the DSSCs increases from 6.8% to 8.3%.
研究领域:
材料科学
·
纳米科技
·
能源化学
·
光伏器件
·
表面科学
·
胶体与界面化学
✓ 已验证
DOI
高影响因子
Small
·
2023
·Vol. 19
·期 39
·2302691
·
IF 13.3
Jing Yu,Guodong Zhou,Yueqing Li,Yuhao Wang,Dengjie Chen,Francesco Ciucci
Composite polymer-ceramic electrolytes have shown considerable potential for high-energy-density Li-metal batteries as they combine the benefits of both polymers and ceramics. However, low ionic conductivity and poor contact with electrodes limit their practical usage. In this study, a highly conductive and stable composite electrolyte with a high ceramic loading is developed for high-energy-density Li-metal batteries. The electrolyte, produced through in situ polymerization and composed of a polymer called poly-1,3-dioxolane in a poly(vinylidene fluoride)/ceramic matrix, exhibits excellent room-temperature ionic conductivity of 1.2 mS cm −1 and high stability with Li metal over 1500 h. When tested in a Li|electrolyte|LiFePO 4 battery, the electrolyte delivers excellent cycling performance and rate capability at room temperature, with a discharge capacity of 137 mAh g −1 over 500 cycles at 1 C. Furthermore, the electrolyte not only exhibits a high Li + transference number of 0.76 but also significantly lowers contact resistance (from 157.8 to 2.1 Ω) relative to electrodes. When used in a battery with a high-voltage LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode, a discharge capacity of 140 mAh g −1 is achieved. These results show the potential of composite polymer-ceramic electrolytes in room-temperature solid-state Li-metal batteries and provide a strategy for designing highly conductive polymer-in-ceramic electrolytes with electrode-compatible interfaces.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态电池
·
高分子化学
·
无机非金属材料
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2024
·
IF 8.1
Zhengwu Wang,Yannan Zhang,Bao Zhang,Dong Yang,Kai Zhou,Yixue Huang,Fei Wang,Jianguo Duan,Xianshu Wang,Peng Dong,Yingjie Zhang
Spinel LiNi 0.5 Mn 1.5 O 4 (LNMO) has gained significant attention as a promising cathode material for lithium-ion batteries due to its high working voltage (>4.7 V) and energy density . However, challenges such as electrolyte decomposition-induced material interface erosion and transition metal dissolution under high operating voltage hinder its commercial use. In this study, a thin and uniform Sm 2 O 3 layer has been successfully deposited on the surface of LNMO using a wet chemical method . A comprehensive investigation of surface morphology , crystal structure, and electrochemical performance of the modified LNMO is conducted. The results demonstrate that the Sm 2 O 3 surface modification acts as a robust multifunctional protective layer, effectively shielding against hydrofluoric acid-induced chemical attack and enhancing the migration efficiency of lithium ions . Notably, the capacity retention rate of LNMO@Sm 2 O 3 (3 wt%) remains up to 88 % after 280 cycles, significantly surpassing the uncoated counterpart. The coated material exhibits a capacity of 114 mAh g −1 even under 10 C rate conditions. Moreover, the AC impedance values and manganese dissolution of the modified material in the organic electrolyte are considerably lower than those of the uncoated counterpart. Theoretical calculations strongly support the experimental findings, revealing higher Mn vacancy formation energy and density of states at the Fermi energy level for the Sm 2 O 3 -modified electrodes. This research contributes to the field of surface modification and paves the way for further enhancements in the electrochemical performance of other high-voltage manganese-based lithium-ion batteries (LIBs).
研究领域:
材料科学
·
电化学
·
能源存储
·
无机化学
·
纳米技术
·
表面工程
·
锂电池
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2022
·Vol. 47
·期 33
·14916-14929
·
IF 7.139
Hongzhi Wang,Chunxiao Wang,Weiguo Zhang,Suwei Yao
Developing non-noble metal catalysts with excellent electrocatalytic performance and stability is of great significance to hydrogen production by water electrolysis, but there are still problems of low activity, complex preparation and high cost. Herein, we fabricated a novel Ni 3 S 2 /Ni(OH) 2 dual-functional electrocatalyst by a one-step fast electrodeposition on nickel foam (NF). While maintaining the electrocatalytic performance of Ni 3 S 2 , the existence of heterostructure and Ni(OH) 2 co-catalyst function greatly improves the overall water splitting performance of Ni 3 S 2 /Ni(OH) 2 –NF. Hence, It shows a low overpotential of 66 mV at 10 mA cm −2 for HER and 249 mV at 20 mA cm −2 for OER. The dual-functional electrocatalyst needs only 1.58 V at 20 mA cm −2 when assembled two-electrode electrolytic cell. Impressively, the electrocatalyst also shows outstanding catalytic stability for about 800 h when 20 and 50 mA cm −2 constant current was applied, respectively which demonstrates a potential electrocatalyst for overall water splitting.
研究领域:
材料科学
·
电化学
·
能源催化
·
纳米材料
·
可持续能源
·
功能材料
·
界面化学
✓ 已验证
DOI
高影响因子
Journal of Energy Chemistry
·
2019
·
IF 5.162
Bo Lv,Sha Zeng,Wei Yang,Jian Qiao,Chao Zhang,Chengfeng Zhu,Minghai Chen,Jiangtao Di,Qingwen Li
Recently, the development of high-performance bifunctional oxygen catalysts integrated with flexible conductive scaffolds for rechargeable metal-air batteries has attracted considerable interest, driving by fast-growing wearable electronics . Herein, we report a flexible bifunctional oxygen catalyst thin film consisting of Co–N–C bifunctional catalysts embedding in carbon nanotube (CNT) networks. The catalyst is readily prepared by pyrolysis of cobalt-based zeolitic imidazolate frameworks (ZIF-67) that are in-situ synthesized in CNT networks. Such catalyst film demonstrates very high catalytic activities for oxygen reduction (onset potential: 0.91 V, and half-wave potential: 0.87 V vs. RHE) and oxygen evolution (10 mA cm −2 at 1.58 V) reactions, high methanol tolerance property, and long-term stability (97% current retention). Moreover, our integrated catalyst film shows very good structure flexibility and robustness. Based on the obtained film air electrodes, flexible Zn–air batteries demonstrate low charging and discharging overpotentials (0.82 V at 1 mA cm −1 ) and excellent structure stability in the bending tests . These results indicate that presently reported catalyst films are potential air electrodes for flexible metal–air batteries.
研究领域:
材料科学
·
电化学
·
纳米能源
·
先进功能材料
·
可再生能源
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）