JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
·
2018
·Vol. 87
·期 1
·147-155
·
IF 1.745
Wang Yu,Chen Lianxi,Liu Zhenhui,Li Jie,Wang Pengpeng
The simple and effective synthesis of well-defined organosilica hollow nanospheres (OHNSs) for fundamental research and practical applications is still a significant challenge. In this work, a facile “cationic surfactant-induced selective etching” strategy was developed for the fabrication of hollow thiocyanatopropyl silsesquioxanes (thiocyanatopropyl-SQ), mercaptopropyl silsesquioxane (mercaptopropyl-SQ) from cyanoethyl-SQ@thiocyanatopropyl-SQ and cyanoethyl-SQ@mercaptopropyl-SQ, respectively. The experiments demonstrated that cetyltrimethylammonium bromide (CTAB) had remarkable influence on the formation of hollow structure and could accelerate the etching process significantly. A formation mechanism initiated by the adsorption of cationic surfactant followed by the etching of inner core with NH 3 ·H 2 O was proposed. Hollow thiocyanatopropyl-SQ and mercaptopropyl-SQ with various shell thickness could be prepared by manipulating the amount of CTAB. And large-scale OHNSs were obtained at appropriate concentration of CTAB through this strategy. Moreover, this strategy might be further extended to fabricate OHNSs with other worthy functional groups.
研究领域:
材料科学
·
纳米技术
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
Molecular Catalysis
·
2019
·
IF 2.938
Fanglin Dai,Shenghui Zhou,Xingzhen Qin,Detao Liu,Haisong Qi
Catalytic transfer hydrogenations of biomass-derived carbonyl compounds to produce corresponding alcohols are important pathway for biomass transformation. Herein, a facile route was developed to synthesize the surfactant-assisted heterogeneous acid-base bifunctional 4,5-imidazoledicarboxylic acid-hafnium hybrid catalyst (Hf-H 3 IDC-T) by hydrothermal self-assembly method. The as-prepared Hf-H 3 IDC-T was characterized by SEM and TEM, FT-IR spectra, N 2 adsorption-desorption, X-ray diffraction patterns (XRD), X-ray photoelectron spectroscopy (XPS), Thermogravimetry analysis (TG), NH 3 /CO 2 -TPD, NMR, GC MS, ICP-OES and elemental analysis. Hf-H 3 IDC-T hybrid had mesoporous structure and acid-base couple sites. A quantitative yield (99.2%) of furfuryl alcohol (FFA) was obtained from furfural (FUR) over Hf-H 3 IDC-T using 2-propanol as the hydrogen source under mild conditions. It's found that the amino groups on the imidazole ring is beneficial to enhance the base sites of catalyst. Meanwhile, the addition of hexadecyl trimethyl ammonium bromide (CTAB) as template agents can improve the specific surface area of the catalyst. Dynamic analysis showed that the apparent activation energy of FUR reduction was as low as 50.89 kJ / mol. The as-prepared catalyst has good stability and can be recycled. Finally, the catalyst also has a good catalytic effect on the hydrogenation reaction of aldehydes and ketones of biomass-derived compounds.
研究领域:
催化
·
材料科学
·
化学工程
·
有机化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SURFACTANTS AND DETERGENTS
·
2022
·Vol. 25
·期 4
·527-536
·
IF 1.972
Jun Chen,Zhiyu Huang,Dongfang Liu,Ying Zhang,Hanmin Li,Hongsheng Lu
In the process of the tertiary recovery of oil and gas resources, it is necessary to use external fluids to displace the crude oil in the reservoir. Whether the crude oil on the surface of the rock can be effectively displaced and the wettability of the rock can be changed to avoid re-adsorption by the crude oil is directly related to the level of oil recovery. Therefore, it is critical to study the cleaning and wettability reversal of reservoir rock surface. Because microemulsions have outstanding performance in changing the wettability of rocks and solubilizing crude oil, this paper uses cetyl trimethyl ammonium bromide (CTAB) as a surfactant and n -butanol as a co-surfactant to prepare microemulsions. The performance of microemulsions with different microstructures on the cleaning and wettability changes of crude oil on the rock surface were studied. The results show that the water-in-oil (W/O) microemulsion has good cleaning efficiency, and the oil removal rate on the sandstone core surface can reach 79.65%. In terms of changing the wettability of the rock surface, W/O, bi-continuous phase (B.C.) and oil-in-water (O/W) microemulsions can change the core surface from lipophilic to hydrophilic. And the effects of the B.C. and O/W microemulsions are more obvious. The microemulsion system that was prepared based on cationic surfactants has a good application prospect in changing the wettability of the reservoir and cleaning the adsorbed crude oil.
研究领域:
石油工程
·
化学工程
·
表面活性剂科学
✓ 已验证
产品关联
DOI
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2022
·
IF 10.753
Chenxing Li,Xiaojiao Zhou,Yangyi Xiao,Tuqiao Zhang,Miaomiao Ye
Recently, solar-driven seawater desalination based on air-water interfacial heating has triggered significant research interest due to its high water evaporation rate, high photothermal conversion efficiency, low energy consumption, simple operation and low cost. However, as the air-water interface temperature reaches as high as 40–70 °C, volatile organic compounds (VOCs) will volatilize into the condensed desalinated water and results in the polluted freshwater. In this work, anionic, cationic, and nonionic surfactants were applied for the first time to inhibit the phenolic compounds such as phenol, p -methylphenol and p -chlorophenol entering into the condensed freshwater. Results showed that the concentration of phenol could be reduced by the addition of cetyl trimethyl ammonium bromide (CTAB). The phenol's distillation concentration ratio (R D ) reduced from 76% to 35% due to the electrostatic interaction and the micellar encapsulation between the CTAB and phenol. Moreover, parameters including CTAB dose, initial phenol concentration, solar intensity, pH, and salinity that affecting the R D were also investigated. Finally, a real seawater solar-driven distillation experiment also revealed that the water quality of freshwater was improved by the addition of CTAB. This work revealed that the surfactants such as CTAB can be potentially used to inhibit VOCs entering into the condensed freshwater during solar-driven seawater distillation.
研究领域:
环境科学
·
化学工程
·
水处理
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NANOTECHNOLOGY
·
2023
·Vol. 34
·期 17
·175601
·
IF 3.5
Jing Fu,Qi-Yan Lv,Yan-Shuai Li,Xiaojie Song,Qi Zhu,Xueling Ren,Hui-Fang Cui
Near-infrared (NIR) persistent luminescence nanoparticles (PLNPs) with high brightness, small sizes, good hydro-dispersivity, and intrinsic surface-functional groups are desirable in biological applications. In this work, Cr3+-doped zinc gallogermanates Zn1+xGa2−2xGexO4:Cr (ZGGC) PLNPs were hydrothermally synthesized via 3-aminopropyltriethoxysilane (APTES) as an additive, or APTES and cetyltrimethylammonium bromide (CTAB) as two co-additives. Addition of APTES not only dramatically enhances the 696 nm NIR luminescence intensity, but also obviously decreases the particle size and introduces amino groups. In particular, the x = 0.1 series ZGGC (ZGGC0.1) with the addition of n moles equivalent APTES (ZGGC0.1-nA) had smaller particle sizes than the x = 0.2 counterpart (ZGGC0.2-nA). The NIR afterglow intensities increased with the APTES introduction. The ZGGC0.2-2.5A sample (also named as ZGGC, Si, -NH2) exhibited maximum luminescence intensities both in solid and aqueous states. With APTES, Si atom is doped and –NH2 groups are modified, the trap depth and density become larger, and the afterglow intensities and decay time are significantly enhanced. More notably, co-addition of CTAB (ZGGC0.2-2.5A-C) (also named as ZGGC, Si, −NH2') further enhances hydro-dispersivity and luminescence intensity, decreases particle sizes, and results in more prominent amino groups. The trap density is drastically higher than that without CTAB (i.e. ZGGC0.2-2.5A). Change of Cr3+ microenvironment in the crystal and more defects introduction contribute to the enhanced brightness. As expected, the ZGGC,Si,-NH2' PLNPs possess excellent biocompatibility, deep tissue penetration and distinguished bioimaging properties, and rechargeability with orange LED light. The ZGGC,Si,-NH2' PLNPs should provide to be an excellent nanomaterial for various functionalization and bioimaging applications.
研究领域:
材料科学
·
生物医学工程
·
纳米技术
·
光学
·
生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2019
·Vol. 7
·期 47
·27156-27163
·
IF 10.733
Weifeng Zhang,Ruixiang Qu,Xiangyu Li,Yanan Liu,Yen Wei,Lin Feng
In the oil/water emulsion treatment field, the separation of dispersed tiny oil droplets and the removal of surfactants are both significant in order to obtain purified water. Superwetting materials have proved to be an ideal solution for stabilized emulsion separation. However, most of the previous studies only focus on the separation of oil from water while neglecting the removal of surfactants. With the purpose of realizing in situ emulsion separation and surfactant removal, a dual functional Janus membrane is designed inspired by mussel-inspired chemistry and an EDC/NHS coupling reaction. After modification, abundant amino groups and carboxyl groups are decorated on two sides of the microfiltration membrane substrate, respectively (denoted as the –NH2 side and –COOH side). Combining special wettability with electrostatic interaction, the as-prepared membrane is able to separate stabilized oil-in-water emulsions and remove anionic/cationic surfactants simultaneously. The –NH2 side is used for the treatment of anionic emulsions with the surfactant sodium dodecyl sulfate (SDS), while the –COOH side is used for the treatment of cationic emulsions with the surfactant hexadecyl trimethyl ammonium bromide (CTAB). More importantly, the separation efficiencies are all above 99.5% and the surfactant removal efficiencies are up to 95.7%. To our knowledge, this is the first time to treat both dispersed oil droplets and surfactants using superwetting materials. The excellent recyclability and stability of the Janus material make it a potential candidate for application in the industrial field.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2024
·Vol. 31
·期 2
·1-16
·
IF 2.6
Guo Liyun,Zhang Haichang,Hua Jing,Liu Jinhui
Cis-1,4 - polyisoprene latex (IRL) is the best alternative to natural rubber latex (NRL) because it is free from proteins and can avoid allergic reactions in the human body. Poor mechanical properties of IRL film are a major obstacle to replacing NRL. To address this issue, a novel strategy was developed by a simple one-pot method to prepare a composite latex introducing hexadecyltrimethylammonium bromide (CTAB) modified sodium montmorillonite (org-Mnt) into the IRL preparation process. The microstructures and morphology of the resulting org-Mnt were characterized by Fourier Transform Infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), and Energy Dispersive Spectrometer (EDS). In addition, the dispersion state of the org-Mnt in the composite latex and the morphology of the composite films were determined by transmission electron microscopy (TEM) and SEM. The properties of the composite latex were investigated. Crosslink density, thermogravimetric analysis (TGA), mechanical properties, and thermal oxygen aging properties of the composite latex films were also studied. Finally, the mechanism of org-Mnt reinforcement of IRL was described comprehensively. The results showed that the org-Mnt/IRL (1phr and 2phr) composite latexes had a stable state, excellent film-formation performance, and excellent mechanical properties. Compared with pure IRL films, the tensile strength of org-Mnt/IRL (2phr) composite films increased by 74%, and after thermal oxygen aging, property change rates of the tensile strength and elongation at break increased by 37.2% and 32.1%, respectively, which exceeded those of NRL. The current research provides an effective method for preparing high-performance composite films suitable for high-end medical applications.
研究领域:
高分子科学
·
材料工程
·
纳米复合材料
·
胶体与界面科学
·
生物医用材料
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2024
·
IF 5.3
Er-Ji Zhang,Tian-Song Deng,Yu-Chun Cheng,Li-Yong Liu,Jia-Fei Gao,Jiahong Wen,Xiaoyu Zhao,Jie Liu
Plasmonic multimetal materials, consisting of a plasmonic core and a catalytic shell in a core–shell structure, often exhibit excellent catalytic performances. Such excellent performances arise from the synergistic collaboration between the plasmonic core’s localized surface plasmon-excited hot electrons and the catalytically active sites of the catalytic shell. In this context, a trimetallic nanostructure was designed featuring gold nanobipyramids (AuNBP) with a silver–platinum alloy shell, serving as a plasmon-mediated photocatalyst for the degradation of methyl orange (MO) under visible and near-infrared light. By altering the concentrations of the surfactants hexadecyltrimethylammonium bromide (CTAB) and hexadecyltrimethylammonium chloride (CTAC), the resulting nanostructure can take on either island-like or shell-like morphology. In the model system of the photocatalytic reaction of MO, employing the synthesized nanoparticles as catalysts, the study investigated the reaction under xenon lamp illumination. The trimetallic nanostructure exhibited robust photocatalytic performances, surpassing AuNBP by a factor of 27.8. The transfer of plasmon resonance energy from AuNBP to the silver–platinum alloy layer, augmenting the generation of charge carriers, elucidates its outstanding photocatalytic performance. The obtained trimetallic nanostructure showcases promising potential applications in the realm of photocatalysis, contributing to the development of advanced plasmon-enhanced photocatalysts with enhanced efficiency and multifunctionality.
研究领域:
纳米技术
·
催化
·
材料科学
·
环境科学
·
光学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CATALYSIS
·
2020
·
IF 7.888
Lan Yuan,Yue-Hua Li,Zi-Rong Tang,Jinlong Gong,Yi-Jun Xu
Pairing CO 2 reduction with oxidative organic synthesis in one photoredox cycle opens a new avenue for cooperative utilization of excited electrons and holes towards efficient solar-to-chemical energy conversion. In this work, we demonstrate a facile cetyltrimethylammonium bromide (CTAB) surfactant functionalized ZnIn 2 S 4 (ZIS)-based dual-functional reaction system for efficient visible light-driven CO 2 -to-CO conversion pairing with selective oxidation of benzyl alcohol to value-added C C coupled products. Our research suggests that the markedly enhanced redox activities are mainly attributed to the unique structure of CTAB-ZIS featuring more crystalline and surface defects, which greatly promotes the interfacial charge carrier transfer, and in particular elevates CO 2 activation and electrons reducibility. It is anticipated that this work would inspire further establishment of efficient novel photocatalysts and cooperative reaction system coupling CO 2 reduction and organic synthesis in a cost-effective manner under ambient conditions to meet the economic and social sustainability goals.
研究领域:
光催化
·
太阳能转化
·
有机合成
·
环境化学
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2019
·
IF 6.393
Yuqian Guo,Yaofeng Zhou,Sicheng Xiong,Lifeng Zeng,Xiaolin Huang,Yuankui Leng,Yonghua Xiong
The usage of nanozyme as label to establish immunoassays offers merits of low cost and high robustness. However, the catalytic activity of nanozyme is usually passivized by the modified layer of bio-recognition molecules. The peroxidase-mimicking activity of cetyltrimethylammonium bromide (CTAB)-coated gold nanoparticles (AuNPs@CTAB) is recovered by Ag + ions. Herein, AuNPs@CTAB with Ag + -triggered catalytic activity was first designed as signal transducer to construct colorimetric immunoassay for human chorionic gonadotropin (HCG) detection. Silver nanoparticles were used as labels which can release numerous Ag + ions by hydrogen peroxide corrosion and thus enhance the catalytic activity of AuNPs@CTAB. To achieve the highest detection sensitivity, we synthesized three kinds of AuNPs@CTAB with similar size but different shapes including nanospheres (AuNSs@CTAB), nanorods (AuNRs@CTAB), and nanocubes (AuNCs@CTAB). The morphology-dependent catalytic properties of AuNPs@CTAB were evaluated. Under optimum conditions, the proposed method using AuNSs@CTAB, AuNRs@CTAB and AuNCs@CTAB using AuNSs@CTAB, AuNRs@CTAB and AuNCs@CTAB gave LOD of 7.8, 15.6 and 31.2 mIU/mL, respectively. The developed immunoassays also showed good accuracy, high reproducibility and high robustness for detecting HCG in serum samples. In summary, the developed immunoassay is a promising bioanalysis platform which can provide similar sensitivity and enhanced robustness compared with traditional horse radish peroxidase-based immunoassays.
研究领域:
生物化学
·
分析化学
·
纳米技术
·
免疫分析技术
✓ 已验证
DOI
高影响因子
BIOELECTROCHEMISTRY
·
2024
·
IF 4.8
Yu-Jie Chen,Yu-Ying Li,Bao-Lin Xiao,Lin-Lin Ma,Ke-Xin Xu,Sanad Abdalbage Mohammed Abdalsadeg,Tao Hong,Ali Akbar Moosavi-Movahedi,Reza Yousefi,Yan-Na Ning,Jun Hong
Constructing a biosensor to detect luteolin content accurately is essential, especially considering its specific health benefits at certain concentrations. In this work, the reaction of HRP catalyzed luteolin could be successfully applied in electrocatalytic processes, the oxidation process of electron loss and dehydrogenation occurring on the electrode replaced the hydrogen receptor role of H 2 O 2 in the HRP biocatalytic process. This oxidation reaction had an apparent current response, thus achieving accurate measurement of luteolin. On this biosensor, CTAB was used to disperse MWCNTs, and BSA was used to improve the hydrophobicity of MWCNTs, which was conducive to the subsequent AuNPs fixation of HRP. Three detection methods (LSV, DPV and SWV) for the detection of luteolin were compared and showed that SWV method had a wider linear range (1 × 10 −8 –2 × 10 −5 M) and lower detection limit (8 × 10 −10 M). The determination of luteolin in Traditional Chinese Medicine (TCM) by high performance liquid chromatography (HPLC) and biosensor was almost identical. Therefore, this biosensor could successfully replace HPLC in detecting luteolin in TCM.
研究领域:
分析化学
·
生物传感器
·
纳米技术
·
药物分析
·
中药
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TALANTA
·
2016
·
IF 4.035
Liangfei Ouyang,Qian Liu,Chaoping Xu,Changgui Liu,Heng Liang
We developed paper-based powder X-ray diffraction (PP-XRD) to implement phase identification and/or crystal structure determination on paper-based platforms. These aims are not possible with other paper-based detectors, such as Raman spectroscopy and mass spectrometry. PP-XRD overcomes these limitations. Here we reported the simple and low-cost in situ PP-XRD protocol for phase identifications of inorganic and organic materials. We demonstrated that sample amounts of lead nitrate on paper substrate can be reduced into 1/30 of conventional ones by using the standard glass substrate at the same signal-to-noise ratio (S/N) of the X-ray diffraction (XRD) pattern. The paper-based method was comparable in sample quantity and intensity with zero background holder method, even though single crystal Si(100) substrate as zero background holder was used for the specimen preparation of CTAB (C 19 H 42 BrN). More importantly, paper substrates helped reduce preferred orientation that was generally present in routine powder XRD. Also, combined with paper chromatography , overlap peaks were eliminated in the XRD detection patterns of lead nitrate and cobalt nitrate hexahydrate. This new PP-XRD protocol may accelerate the process to identify phase or determine the molecular structures of new materials using trace sample directly. It also includes a hyphenated technique of powder XRD with a simple paper-based microfluidic separation of chemical solutions .
研究领域:
材料科学
·
分析化学
·
X射线衍射
·
基于纸的设备
·
微流控技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子