Carbon Neutrality
·
2024
·Vol. 3
·期 1
·1-16
·
IF 0
Liu Xinghui,Naraginti Saraschandra,Zhang Fuchun,Sathishkumar Kuppusamy,Saxena Kuldeep K.,Guo Xiang
Environmental contamination by hexavalent chromium (Cr(VI)) and antibiotic drug residues pose significant challenges to public health and ecosystems. This study investigates the application of CoTiO 3 /BiVO 4 @MIL-Fe(53) (CT/BV@Fe-MOF) for the reduction of Cr(VI) and degradation of tetracycline (TCL) under visible light. After grafting an iron-based metal–organic framework MIL-Fe(53) on a modified CoTiO 3 /BiVO 4 composite, the photogenerated electrons could easily be transferred from CoTiO 3 to BiVO 4 /Fe-MOF species via interfacial charge transfer. UV–vis diffuse reflectance spectroscopy showed that charge carriers were formed in response to visible light absorption. The effect of different operating parameters, including catalyst load, pH, initial Cr(VI), and TCL concentration, was systematically evaluated during the photocatalytic process. The CT/BV@Fe-MOF composite exhibited 98.7% reduction efficiency in Cr(VI) (50 ppm) and 97.5% degradation efficiency towards TCL (30 ppm) within 90 min, resulting in a greater efficiency than the pristine CoTiO 3 , BiVO 4 , and Fe-MOF materials. The CT/BV@Fe-MOF composite displayed excellent stability over six cycles, highlighting its potential for practical applications. In addition, the plausible degradation pathway of TCL was evaluated using LC-ESI/MS analysis, while the TEST program was utilized to investigate the toxicity of the products generated during the degradation process.
研究领域:
环境科学
·
材料科学
·
化学工程
✓ 已验证
DOI
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Xianyun Ma,Bowen Zhu,Zuopeng Li,Min Wang,Chang-qing Miao,Yajia Liu,Sanbing Zhang
Defect engineering is a promising approach for constructing highly efficient catalytic activity based on metal–organic frameworks (MOFs). In this study, a defective MOFs, referred to as quasi-MIL-100(Fe), was synthesized by moderate synthesis method and then careful thermal treatment at an atmosphere ranging from 150 to 450 °C, linking crystalline materials and the associated metal oxides. MIL-100(Fe) heat-treated at 250 °C (referred to as M-250) partially breaks coordination bonds, resulting in a crystalline-to-amorphous transformation, increased porosity, and elimination of ligands. Compared to pristine MIL-100(Fe), M-250 possessed more reactive sites and exhibited the highest photo-Fenton degradation of ciprofloxacin with 95.6 % removal efficiency in 90 min, despite the unfavorable photo properties for photo-Fenton performance due to the destruction of the crystal structure. Additionally, density functional theory (DFT) calculations, combined with free radical quenching and mass spectrometry analysis, elucidated the catalytic mechanism. These findings highlight the significant potential of quasi-MOFs for applications in the photo-Fenton reaction.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2024
·
IF 4
Mengjiao Yu,Xiong-Fei Zhang,Siting Yang,Yunhua Bai,Zhongguo Wang,Jianfeng Yao
Developing functional catalysts with both Lewis and Brønsted acid sites is an essential task for achieving the direct conversion of glucose to 5-hydroxymethylfurfural (5-HMF), a process that is crucial for the sustainable production of renewable fuels and chemicals. In this work, a mixed-linker strategy is proposed to prepare defective MIL-53(Al)-NH 2 by introducing trifluoroacetic acid into the MIL-53(Al)-NH 2 synthesis process. The creation of defects facilitates the exposure and accessibility of Al 3+ centers, as well as changes the coordination environment within the MIL-53(Al)-NH 2 skeleton. Both the number of Lewis and Brønsted acid sites are boosted, which is beneficial for glucose activation and 5-HMF generation. Through optimizing the reaction conditions, a glucose conversion of 98.3 % with a 5-HMF yield of 59.3 % was achieved by using defective 6d-MIL-53(Al)-NH 2 in a biphasic tetrahydrofuran/H 2 O NaCl system. Moreover, the 6d-MIL-53(Al)-NH 2 catalyst showed excellent recyclability and reusability, with its catalytic efficiency maintained almost unchanged for consecutive 10 cycles. The catalytic mechanism was elucidated and the acidity of the Lewis and Brønsted acid was modulated by defect engineering to achieve exceptional performance.
研究领域:
化学工程
·
催化科学
·
可再生资源
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2024
·
IF 4.9
Jiejun Li,Lin Li,junjie Fei,Pengcheng Zhao,Jinyao zhao,Yixi Xie
Fenitrothion (FT) is a common organophosphorus pesticide widely used in agricultural. Residues of fenitrothion in crops can adversely affect human health. In this work, modified MIL-125-Fe was prepared by changing the solvent ratios and further etching with iron nitrate, followed by high-temperature pyrolysis to obtain modified-TiO 2 /FeTiO 3 -doped nitrogen-containing carbon framework (m-TiO 2 /FeTiO 3 @NCF). The porous carbon material of m-TiO 2 /FeTiO 3 @NCF was used to modify the GCE to produce FT electrochemical sensor. Under optimized conditions, the sensor exhibited good detection performance for FT with a low LOD of 0.96 nM and a wide detection linear range of 1–9000 nM, and also exhibited good reproducibility (RSD = 2.08 %), repeatability (RSD = 1.09 %) and anti-interference performance. The sensor was successfully applied in real sample tests showing the recovery rates of 98.7 %–101.2 %. The present study provides a new idea for the rapid and accurate detection of FT.
研究领域:
农业科学
·
环境科学
·
分析化学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Hui Li,Weiguo Liu,Zhihao Han,Ndzondelelo Bingwa,Tianyu Wang,Hengdi Li,Yunpu Wang,Feiqiang Guo,Xiaoling Ma,Chenggong Sun
Microwave heating (MW) is known for its efficacy in promoting transesterification for biodiesel production. However, the microwave-induced catalysis, linked to catalyst absorbing capability, remains poorly understood. Herein, a class of alkaline catalysts with strong microwave absorption were synthesized, validating their positive impact on transesterification. Various methods were used to reveal the relationship between microwave absorbing capacity and physicochemical properties of the synthesized catalyst (KF/Mg-MIL). Results indicated the previously recognized basicity’s role for KF/Mg-MIL was surpassed by microwave absorbing capability (permittivity and permeability) in MW (2.45 GHz). KF/Mg-MIL, with ε r = 4.94′- j 1.09″ and μ r = 1.03′- j 0.024″, efficiently transformed microwave into thermal energy via the dielectric loss and magnetic loss, saving 50 % energy consumption and reducing 1051.61 kg CO 2 for per ton biodiesel compared to water bath heating (WB). Notably, “non-thermal” effect was observed with KF/Mg-MIL in MW, which reduced activation energy by 2.49 kJ/mol and increased the frequency factor by 793.32 min −1 in comparison to WB.
研究领域:
化学工程
·
能源科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2019
·
IF 5.155
Zhaoyang Li,Yongjie Zhao,Qing Guan,Qian Liu,Sara Khan,Leilei Zhang,Xianze Wang,Lei Chen,Xia Yang,Mingxin Huo
Photocatalytic reduction of nitrate has attracted much attention recently, however, low efficiency and difficult separation have limited its application in practice. In this study, the novel direct dual Z-scheme AgBr(Ag)/MIL-101(Cr)/CuFe 2 O 4 (AB/M/CFO) was fabricated by the hydrothermal technology combined with the photodeposition method for the first time. The AB/M/CFO exhibited the highest nitrate conversion and nitrogen selectivity (79.9% and 94.5%, respectively) compared to AgBr(Ag)/MIL-101(Cr), MIL-101(Cr) and CuFe 2 O 4 for 30 min UV-light irradiation. The dual Z-scheme of AB/M/CFO enhanced electron transfer and charge separation, which was proved by transient photocurrent responses, leading to a significant improvement in photocatalytic efficiency. Meanwhile, after four cycles, the AB/M/CFO photocatalyst also displayed a strong magnetic separation ability and excellent recycling stability. Furthermore, the excitation and electron transfer process over dual Z-scheme AB/M/CFO photocatalytic material were proposed, based on the radical trapping experiments. Our work provides a new strategy to construct dual Z-scheme MOFs-based materials that have promising applications in photocatalytic reduction of pollutants.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2016
·
IF 8.328
Yanghe Fu,Long Sun,Huan Yang,Lai Xu,Fumin Zhang,Weidong Zhu
The Ni-doped NH 2 -MIL-125(Ti) catalyst was developed for the photocatalytic aerobic oxidation of aromatic alcohols upon visible light irradiation. The results show that different aromatic alcohols can be effectively transformed to their corresponding aldehydes with almost absolute selectivity using O 2 as the oxidant over Ni-doped NH 2 -MIL-125(Ti) upon visible light irradiation. Compared with the parent catalyst NH 2 -MIL-125(Ti), Ni-doped NH 2 -MIL-125(Ti) exhibits a significantly enhanced photocatalytic activity for the selective oxidation of aromatic alcohols. Preliminary studies indicate that the doping of Ni nanoparticles into NH 2 -MIL-125(Ti) could improve the visible-light harvesting, charge-separation, and electron-transport of the resultant catalyst, leading to the enhanced photocatalytic activity. The current work provides some guidance in the development of MOF-based photocatalysts for organic syntheses.
研究领域:
材料化学
·
有机合成
·
光催化
✓ 已验证
产品关联
DOI
高影响因子
Analytical Methods
·
2016
·Vol. 8
·期 15
·3263-3269
·
IF 1.915
Yangjuan Wang,Kejing Du,Yifu Chen,Yijun Li,Xiwen He
Green octahedral crystals of MIL-101(Cr) were synthesized and used for the determination of Pb2+ at the trace level by differential pulse anodic stripping voltammetry (DPASV) because of their good adsorption capability for Pb2+. The synthesized MIL-101(Cr) was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). Parameters affecting the electrochemical process, such as the pH of the electrolyte solution, the volume of the MIL-101(Cr) suspension, the potential and the time for accumulation, were investigated in detail. Under optimal conditions, the electrochemical sensor had a linear response over the concentration range of 1.0 × 10−9 to 1.0 × 10−6 mol L−1 (R2 = 0.999) with a detection limit of 5.0 × 10−10 mol L−1 (S/N = 3). The method was successfully applied to the determination in real samples and good recoveries are obtained from different spiked samples.
研究领域:
分析化学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2014
·
IF 4.258
Ye-Yu Wu,Cheng-Xiong Yang,Xiu-Ping Yan
Metal–organic frameworks (MOFs) have received considerable attention as novel sorbents for sample preparation due to their fascinating structures and functionalities such as large surface area, good thermal stability, and uniform structured nanoscale cavities. Here, we report the application of a thermal and solvent stable MOF MIL-88B with nanosized bipyramidal cages and large surface area for solid-phase microextraction (SPME) of polychlorinated biphenyls (PCBs). Novel MIL-88B coated fiber was fabricated via an in situ hydrothermal growth of MIL-88B film on etched stainless steel fiber. The MIL-88B coated fiber gave large enhancement factors (757–2243), low detection limits (0.45–1.32 ng L −1 ), and good linearity (5–200 ng L −1 ) for PCBs. The relative standard deviation (RSD) for six replicate extractions of PCBs at 100 ng L −1 on MIL-88B coated fiber ranged from 4.2% to 8.7%. The recoveries for spiked PCBs (10 ng L −1 ) in water and soil samples were in the range of 79.7–103.2%. Besides, the MIL-88B coated fiber was stable enough for 150 extraction cycles without significant loss of extraction efficiency. The developed method was successfully applied to the determination of PCBs in water samples and soil samples.
研究领域:
分析化学
·
环境科学
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2024
·
IF 8.3
Yu Ding,Yuyang Hu,Yangyang Zhao,Yaru Li,Ziteng Huang,Soufian Chakir,Yongfei Xu,Daosheng Sun,Songqin Liu,Huanting Wang,Xianbiao Wang
Indium, copper, and mercury are important raw materials in the electronics industry and often coexist in factory wastewater. Therefore, the development of a highly sensitive and selective method for the simultaneous detection of these heavy metal ions is of great significance for water quality monitoring and environmental protection. Herein, we report a NH2-MIL-53 fluorescent probe for the simultaneous detection of trace In3+, Cu2+, and Hg2+ in water. After a low-temperature NH3 plasma tailoring treatment for grafting electron-donor amine groups, the obtained NH2-MIL-53-M exhibited enhanced fluorescence emission intensity (∼6 times) coupled with selective adsorption of In3+, Cu2+, and Hg2+. This quenched the NH2-MIL-53-M fluorescence and allowed to significantly increase the selectivity and sensitivity for detection of In3+, Cu2+, and Hg2+. The fluorescence quenching constant (Ksv) values were 2.23 × 105, 1.00 × 105, and 2.74 × 104 M–1, while the limit of detection (LODs) values were 0.06, 0.14, and 0.53 μM, for In3+, Cu2+, and Hg2+, respectively. The concentrations of In3+, Cu2+, and Hg2+ in real environmental samples could be determined by addition of appropriate masking agents, and the recoveries were within the range of 94–110%. This study not only supplied a strategy for constructing a highly sensitive and selective fluorescent probe but also established a platform for simultaneous detection of multiple heavy metal ions in water.
研究领域:
环境科学
·
材料科学
·
分析化学
✓ 已验证
DOI
PubMed
高影响因子
ANALYST
·
2011
·Vol. 137
·期 1
·133-139
·
IF 3.913
Cheng-Xiong Yang,Shan-Shan Liu,He-Fang Wang,Shan-Wei Wang,Xiu-Ping Yan
Metal–organic framework MIL-53(Al) was explored as the stationary phase for high-performance liquid chromatographic separation of position isomers using a binary and/or polar mobile phase. Baseline separations of xylene, dichlorobenzene, chlorotoluene and nitrophenol isomers were achieved on the slurry-packed MIL-53(Al) column with high resolution and good precision. The effects of mobile phase composition, injected sample mass and temperature were investigated. The separation of xylene, dichlorobenzene, chlorotoluene and nitrophenol isomers on MIL-53(Al) were controlled by entropy change.
研究领域:
化学
·
分析化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2024
·
IF 4.8
Mengting Xu,Zeyu Chen,Yeyang Ni,Wanyong Yang,Xihua Xu,Qing Liu,Zhaoyang Fei,Mifen Cui,Xu Qiao
MIL-126(Fe) shows great potential for aqueous phase drug adsorption due to its permanent porosity and easy modification. Herein, we utilized the ligand installation method to introduce two ligands, 2-amino terephthalic acid (NH 2 -BDC) and 2-nitro terephthalic acid (NO 2 -BDC), into MIL-126(Fe) to prepare MIL-126(Fe)-NH 2 and MIL-126(Fe)-NO 2 , respectively. Various analytical tools were used to confirm the successful installation of the 1, 4-phthalic acid (BDC) series of ligands, as well as the successful introduction of amino (-NH 2 ) and nitro (-NO 2 ) groups. The presence of both -NH 2 and -NO 2 groups improved the adsorption of TC by the adsorbent material, with -NH 2 groups having a stronger influence on the enhancement. The experimental results indicated that MIL-126(Fe)-NH 2 had the highest adsorption performance at the optimal pH of 7, achieving a static adsorption capacity of 326.5 mg/g, which was about twice the adsorption capacity of the original MIL-126(Fe). X-ray photoelectron spectroscopy (XPS) determined that the adsorption of TC by MIL-126(Fe)-NH 2 relies mainly on π-π interaction and Fe-N coordination bonds. Furthermore, the higher adsorption capacity of MIL-126(Fe)-NH 2 can be attributed to the O-H⋯N hydrogen bonds interaction between -NH 2 and the phenolic hydroxyl group (Ph-OH) in the TC molecule.
研究领域:
材料科学
·
环境科学
·
药物化学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）