ENVIRONMENTAL TECHNOLOGY
·
2021
·
IF 3.247
Jingling Wang,Wensong Lin,Manru Dong,Yue Xing,Qicheng Zhang
In this work, the CdS quantum dots (QDs) decorated Bi2MoO6/Bi2Mo3O12 (BMO) heterojunction photocatalyst (C/BMO) has been successfully synthesized using a facile two-step hydrothermal method. The as-prepared photocatalysts were characterized by XRD, FTIR, XPS, FESEM, TEM, UV-vis DRS, PL and photoelectrochemical measurements to investigate the effects of CdS(QDs) and BMO heterojunction on the structure, morphology, optical and charge carrier transmission characteristics of the photocatalysts. Narrow band gap and superior catalytic activities were found in C/BMO as compared with pure BMO. Moreover, the C/BMO photocatalyst containing twice CdS content (2-C/BMO) exhibits even higher photocatalytic activity and stability. After exposure to visible light for 30 min, the degradation rate of Rhodamine B (RhB), Methylene blue (MB) and Ofloxacin (OFX) by 2-C/BMO reached 95%, 92% and 76%, respectively. Radicals scavenging experiments and electron spin-resonance spectroscopy (ESR) investigations indicated that the superoxide radical anions (∙O2− ), hole (h+) and hydroxyl radicals (•OH) are the dominating active species in the photodegradation processes. ∙O2− and h+ are the key factors in the degradation of RhB and OFX solutions, and •OH is the major determinant in removal of MB. The process and photocatalytic mechanism on 2-C/BMO was discussed. Well absorption of visible light, effective separation of photoelectron-hole pairs and the transportation of photogenerated carriers at the interfaces of ternary semiconductor heterojunction are suggested as the key factors to enhance the photocatalytic performance of the photocatalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2019
·
IF 5.155
Chengxin Wang,Sadaf Mutahir,Liang Wang,Wu Lei,Xifeng Xia,Xinyan Jiao,QingLi Hao
Herein, a double-buffering strategy is presented to boost the lithium storage potential of Fe 3 O 4 . Firstly, the skeleton of MIL-100 (Fe) MOF is grown on graphene oxide, as a self-assembled template via in-situ solvothermal approach, which transform into ultrafine, well-dispersed and mesoporous carbon coated Fe 3 O 4 QDs (4 nm) imbedded on reduced graphene oxide (Fe 3 O 4 QDs@C/rGO), by pyrolysis. Each component in such a well-designed porous hierarchical structure significantly contributes to the remarkable enhancement of lithium ion storage performance, leading to high reversible capability with excellent prolonged cyclic stability after 2000 cycles (505 mAh g −1 at 2.0 A g −1 ). Both, Graphene sheets and mesoporous carbon act as conductive support for anchoring uniform Fe 3 O 4 QDs with confined double buffering for cyclic volume flux. Multi-channels with uniform mesopores in the self-assembled array and 4 nm QDs of Fe 3 O 4 confined in conductive carbon shells were favorable to enhance the interfacial electron/ion transfer, leading to the excellent rate and cycling performance with released volume changes upon Li + insertion/extraction. The present research work provides a promising outset design and synthesis strategies for metal oxide QDs based nanocomposites, which may also be extended to the other electrode material system.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Zelong Zhang,Linli Shen,Huiling Zhang,Ling Ding,Guangzhan Shao,Xiaojuan Liang,Weidong Xiang
Currently, the application of all-inorganic cesium lead halide perovskite (CsPbX 3 , X = Cl, Br, I) quantum dots (QDs) is limited due to toxicity of lead and poor ambient stability. In our work, a series of Ti-doped CsPbI 3 QDs were successfully prepared in borosilicate glass (SiO 2 -B 2 O 3 -ZnO) by the melt quenching and in situ crystallization technique. The samples showed excellent water/thermal stability, and the tunable emission (650–695 nm) was controlled by different Ti contents and heat treatment temperatures. In particular, the optical properties of CsPb 1− x Ti x I 3 QDs@glasses (x ≤ 0.5) are superior to those of pristine CsPbI 3 QDs@glass. As a result, the wLED was assembled using red-emitting CsPb 1− x Ti x I 3 QDs@glasses and yellow-emitting Ce 3+ :YAG phosphor under excitation of InGaN blue chip, which demonstrated an outstanding luminous efficiency of 102.44 lm/W, a high color rendering index of 80.6. Particularly, Ti-doped CsPbI 3 QDs@glasses with red and far-red light are combined with a blue-chip to assemble an LED device, which exactly satisfies the lighting conditions of plant growth.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2017
·
IF 5.401
Zhi-Qiang Zhou,Ren Yan,Jie Zhao,Li-Yun Yang,Ji-Lei Chen,Yan-Jun Hu,Feng-Lei Jiang,Yi Liu
The pollution of Hg 2+ is one of the most serious problems to human health due to their high toxicity, mobility, difficulty in degradation and ability of accumulation in ecological systems. Thus, it is of great importance to develop highly selective and sensitive probe for detecting Hg 2+ in aquatic ecosystems. Here we propose a new turn-on strategy for specific recognition and detection of Hg 2+ . Mn-doped ZnSe quantum dots (QDs) with small size (2.1 nm) were prepared and adopted as probe, the small size of doped QDs makes the replacement of Mn 2+ by Hg 2+ accessible, which eliminates the fluorescence quenching effect of superficial Mn 2+ on Mn-doped ZnSe QDs. Different from traditional semiconductor nanocrystals based turn-off probe for detecting Hg 2+ , we realize a turn-on strategy for the selective detection of Hg 2+ by Hg 2+ -Mn 2+ replacement using semiconductor nanocrystals (Mn-doped ZnSe QDs). This turn-on mechanism was verified by fluorescence spectra, ICP-AES and XPS. In the absence of Hg 2+ , Mn-doped ZnSe QDs possessed low fluorescence intensity. With the addition of Hg 2+ , the fluorescence intensity around 600 nm increased dramatically. Our Mn-doped ZnSe QDs exhibits excellent selectivity and sensitivity for Hg 2+ . The limit of detection is 7.0 nM, which is lower than the mercury toxic level defined by the U.S. Environmental Protection Agency (10 nM). The result of Hg 2+ detection in real samples indicates the feasibility and sensitivity of our probe for application in environmental samples.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2025
·
IF 6.1
Ninghan Tang,Chaoting Shi,Xiandeng Hou,Hui Xin,Lan Wu
Excessive use of tetracycline poses risks to human health and the ecological balance, which poses challenges to develop a method for facile and reliable detection of tetracycline. Herein, the MoS 2 QDs@ZIF-8 was prepared through a simple method, serving as an asynchronous response sensor for the naked-eye detection of tetracycline. The photoinduced electron transfer between the composite sensor and target tetracycline led to quench the blue fluorescence emitted by MoS 2 QDs. Hydrogen bond, chelation, π-π stacking and pore effect between the composite sensor and tetracycline made the aggregation of tetracycline, significantly enhancing the intrinsic yellow fluorescence of tetracycline. Moreover, it also exhibited good detection performance for the real samples such as river water, farm wastewater, honey and milk, demonstrating that it was suitable for naked-eye visualization detection in the field. This work provided a novel approach for constructing ratiometric fluorescence sensors with asynchronous response.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICA CHIMICA ACTA
·
2018
·
IF 5.123
Guobin Mao,Qin Zhang,Yeling Yang,Xinghu Ji,Zhike He
Alkaline phosphatase (ALP) is a universal and important hydrolase that has been proved to be associated with several diseases. Herein, a simple and effective method was proposed for ALP detection based on the inner filter effect of p-nitrophenol (pNP) on the fluorescence of CdTe/CdS quantum dots (QDs). For the preparation of CdTe/CdS QDs, Na 2 TeO 3 was used as the Te source, and dithiol as the S source and surface ligand. The as-prepared CdTe/CdS QDs show good fluorescence properties, such as high quantum yield (∼80%), and good chemical/photo-stability. pNP is a hydrolysate of p-nitrophenol phosphate disodium salt under the catalysis of ALP, which could effectively quench the fluorescence of QDs due to the absorption spectra of pNP overlaps well with the excitation spectra of the CdTe/CdS QDs. Therefore, the prepared CdTe/CdS QDs could be applied for ALP detection. A good linear relationship ranging from 2.2 to 220 U/L was obtained with the limit of detection as low as 0.34 U/L. In addition, this method was successfully applied for the assay of ALP in human serum with the satisfactory results.
研究领域:
生物化学
·
医学检测
·
纳米材料
✓ 已验证
DOI
高影响因子
Toxins
·
2022
·Vol. 14
·期 10
·710
·
IF 5.075
Shasha Feng,Wei Hu,Fubin Pei,Zhiwei Liu,Bin Du,Xihui Mu,Bing Liu,Qingli Hao,Wu Lei,Zhaoyang Tong
A sensitive dual-readout immunosensor for fluorescence and electrochemiluminescence (ECL) detection of ricin was established, which was combined with a streptavidin–biotin signal amplification system. CdSe/ZnS quantum dots with fine fluorescence and ECL properties were used as the dual-signal function probes of the sandwich immunocomplex. Under the optimum experimental conditions, the dual signal intensity increased significantly with the rise in ricin concentration. The fluorescence intensity of the senor exhibited a good liner relationship toward the ricin concentrations with 0.1~100 ng/mL and the limit of detection (LOD) was 81.7 pg/mL; taking ECL as the detection signal, the sensor showed a linear relationship with the ricin concentrations ranging from 0.01 ng/mL to 100 ng/mL and the LOD was 5.5 pg/mL. The constructed sensor with high sensitivity had been successfully applied to the detection of ricin in complex matrices with satisfactory recoveries. The proposed immunosensor model can be extended to the analysis and detection of others target proteins.Keywords:immunosensor;ricin;fluorescence;electrochemiluminescence;dual readout;CdSe/ZnS quantum dotsKey Contribution:A dual-readout (fluorescence and ECL) immunosensor for ricin detection was established based on CdSe/ZnS quantum dots with dual signal, which was combined with a streptavidin–biotin signal amplification system.
研究领域:
分析化学
·
生物化学
·
纳米技术
✓ 已验证
DOI
PubMed
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 26
·19799-19806
·
IF 3.84
Xiao Wei,Zhiping Zhou,Tongfan Hao,Hongji Li,Yongsheng Yan
In this paper, novel molecularly imprinted polymers (MIPs) based on Mn doped ZnS quantum dots (QDs) with molecular recognition ability were successfully synthesized by precipitation polymerization using 2,6-dichlorophenol (2,6-DCP) as template, methacrylic acid (MAA) as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as the cross-linker. The obtained materials (MIPs-ZnS:Mn QDs), which were composed of Mn doped ZnS QDs as phosphorescence signal and MIPs as molecular selective recognition sites, could sensitively and selectively recognize the template molecules by using the spectrofluorometer. After the experimental conditions were optimized, a linear relationship was obtained covering the range of 1.0–56 μmol L−1 with a correlation coefficient of 0.9994. The developed method was applicable to routine trace determination of 2,6-DCP in real examples. This study also provides a general strategy to fabricate MIPs-coated QDs with excellent performance and is desirable for chemical sensor application.
研究领域:
分析化学
·
材料科学
✓ 已验证
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2023
·
IF 3.6
Zhaofa Li,Quanxiu Zhou,Palanivel Sathishkumar,Liang Peng,Qunfang Wang,Feng Long Gu
The present work fabricated a novel dual-emission responsive ratiometric fluorescent hybrid nanoprobe using a mixture of blue fluorescence-emitting N-Doped Carbon Quantum Dots (N-CQDs) and red fluorescence-emitting l -cysteine-capped CdSe/ZnS Quantum Dots (Lcys-CdSe/ZnS QDs). The addition of Cu 2+ resulted in the strong and specific fluorescence quenching in Lcys-CdSe/ZnS QDs while N-CQDs retained their fluorescence intensity. Further exploration of the nanoprobe showed that the detection limit was 3.78 × 10 −9 M and the linear range was below 3.2 × 10 −6 M. The nanoprobe possessed excellent anti-interference in the Cu 2+ determination and its application was successful in natural water samples. Experimental results suggested that the superficial left cysteine (Lcys) combines with Cu 2+ causing static quenching. Results of density functional theory (DFT) computation explained that Cu 2+ has the greatest possibility to combine with surficial Lcys and furthermore illustrated the role of the combination in static quenching. The work showed one of origin of the selectivity of the nanoprobe and a potentially guidance to design high selective ratiometric fluorescent nanoprobes.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2023
·Vol. 11
·期 29
·15833-15843
·
IF 11.9
Yi Tao,Zikun Tang,Yihong Zhong,Dequan Bao,Zhenqiu Gao,Wei Zhao,Zhen Wen,Hao Zhang,Kanghong Wang,Xuhui Sun
Photoelectrochemical (PEC) water splitting is a promising approach for the conversion of solar energy to hydrogen fuel. However, the solar-to-hydrogen (STH) efficiency is still restricted by the kinetically sluggish oxidation reaction on the surface of the photoanode. Herein, a unique composite structure (ZnO@NiO–QDs) was developed as the photoanode, in which the highly dispersed ZnO (d-ZnO) particles derived from the pyrolysis of ZIF-8 serve as the scaffolds to support NiO (cocatalysts) and colloidal CdSe(CdSexS1−x)4(CdS)2 QDs (denoted as CAS, a light absorber). Due to the enhanced hole consumption accelerated by NiO cocatalysts, the optimized photoanode (d-ZnO@NiO0.03–CAS) exhibits a higher saturated current density (Jsc) of 21.7 mA cm−2 than the d-ZnO–CAS photoanode (15.6 mA cm−2) under standard one sun (AM 1.5 G, 100 mW cm−2) solar irradiation. More importantly, such an electrode can still work as an electrocatalyst under light-off conditions via a sole electrochemical (EC) process. Thus, a well-designed bifunctional electrode that integrates cocatalysts and light absorbers makes it possible to generate hydrogen efficiently under both light-on and light-off conditions, providing an efficient and low-cost paradigm to improve the hydrogen evolution performance.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Chun-Hui Gao,Shi-Ming Zhang,Fang-Fang Feng,San-San Hu,Qian-Fan Zhao,Yong-Zheng Chen
Visible-light-driven nicotinamide adenine dinucleotide (NADH) regeneration is one of the most effective measures, and cadmium sulfide (CdS) materials are typically used as low-cost photocatalysts. The CdS photocatalysts, however, still suffer from low regeneration efficiency and poor cycle stability. In this work, the CdS quantum dots (QDs) less than 10 nm embedded onto silica gel (CdS QDs/Silica gel) were constructed for visible-light-driven NADH regeneration by a successive ionic layer adsorption reaction and ball milling method. Results demonstrate that the photosensitivity of the CdS QDs/Silica gel composite was 31 times higher than that of the bulk CdS. Moreover, the conduction band (CB) edge of the CdS QDs/Silica gel composite is −1.34 eV, which is more negative 0.5 eV than that of the bulk CdS. The obtained CdS QDs/Silica gel composites showed the highest NADH regeneration yields of 68.8% under visible-light (LED, 420 nm) illumination and can be reused for over 40 cycles. Finally, the bioactivity of NADH toward enzyme catalysis is further confirmed by the hydrogenation of benzaldehyde to benzyl alcohol catalyzed with an alcohol dehydrogenase as enzyme catalysis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBON
·
2022
·
IF 11.307
Chenxi Wang,Jia Chen,Li Zhang,Yaqi Yang,Minghui Huang,Chao Chen,Chunyan Li,Yixi Xie,Pengcheng Zhao,Junjie Fei
In this work, two-dimensional Zn carbon nanosheets (CNs) are obtained after heat treatment of in situ synthesized ZIF-8/NaCl nanocomposites , which are ultrasonically mixed with carboxylated multi-walled carbon nanotubes (MWCNTs). Subsequently, the nanocomposites Zn CNs-MWCNTs with large specific surface area and excellent catalytic properties are obtained. Meanwhile, the photoelectric material H–Cu 2 O/CdTe QDs are drop-coated on Zn CNs-MWCNTs/GCE and the modified electrode Zn CNs-MWCNTs/H–Cu 2 O/CdTe QDs/GCE is obtained. Eventually, a novel dopamine photoelectrochemical sensor based on Zn CNs-MWCNTs/H–Cu 2 O/CdTe QDs/GCE is constructed. Among them, the photocurrent intensity of H–Cu 2 O/CdTe QDs is much higher than that of pure H–Cu 2 O and pure CdTe QDs. This is due to the effective combination of CdTe QDs and H–Cu 2 O to form a p-p heterojunction , which can effectively suppress the recombination of electron-hole pairs. Subsequently, the working mechanism of the photoelectrochemical sensor is investigated in depth by the Kubelka-Munk model. At the same time, the photoelectrochemical sensor has reliable selectivity, stability, reproducibility and limit of detection (LOD = 0.3 nM), and also provides a new idea for the detection of dopamine.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）