JOURNAL OF CATALYSIS
·
2023
·
IF 7.3
Tianliang Xia,Meiting Ju,Hengli Qian,Xinyu Bai,Ruite Lai,Chao Xie,Guanjie Yu,Yao Tang,Chengxu Wang,Qidong Hou
Peroxymonosulfate (PMS) activation is a prospective technique for pollutant degradation, but less attention has been paid to the tunable modulation and effective utilization of reactive oxygen species in selective oxidation. Herein, we develop a photocatalytic Fenton-like system with Fe single-atom supported on carbon nitride that generates singlet oxygen ( 1 O 2 ) as dominant active species to selectively oxidize glucose to gluconic acid. The loading of atomic Fe onto carbon nitride can notably aggrandize the light absorption and boost the photon-generated carriers transfer efficiency. With PMS and simulated sunlight, the Fe single-atom catalyst afforded a glucose conversion of 36.3% with gluconic acid selectivity up to 91.6%, as is superior to the state-of-the-art catalytic systems. Control experiments and theoretical analysis reveal that the excellent catalytic performance of Fe single-atom supported on carbon nitride is resulted from the enhanced photocatalytic activity with better PMS activation ability.
✓ 已验证
产品关联
DOI
高影响因子
FOOD HYDROCOLLOIDS
·
2023
·
IF 10.7
Shuifang Mao,Yanming Ren,Changqing Wei,Shiguo Chen,Xingqian Ye,Tian Jinhu
Antibacterial food packaging with slow and sustained release of antibacterial agents exerts a crucial role in ensuring food quality and safety. Herein, metal-phenolic networks based on epigallocatechin gallate (EGCG) and iron (Fe), as well as thyme essential oil nano-emulsion (TEON) were successfully incorporated into sodium alginate (SA) matrix to prepare SA-based films through solution casting method. The effects of EGCG/Fe and different concentrations of TEON on the morphology, structure, physical properties, and functional characteristics of SA-based films were systematically analyzed. Results showed that the addition of EGCG/Fe and TEON significantly enhanced the mechanical intensity, flexibility, thermal stability, UV shielding, water vapor barrier performance, and oxygen barrier ability of the SA-based films. In addition, the introduction of TEON made the SA-based films slow-release of thyme essential oil, which obviously enhanced the antioxidant and dynamic antimicrobial properties of the films. Ultimately, the SA-based film revealed an outstanding preservation effect on pork by significantly reducing the increase rate of pH value and total plate count of pork. This developed SA-based films loaded with EGCG/Fe and TEON were expected to become a potential antibacterial material with slow-release properties for food packaging applications.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Research and Technology-JMR&T
·
2023
·
IF 6.4
Xinyue Mao,Qingnan Meng,Mu Yuan,Sifan Wang,Shiyin Huang,Baochang Liu
The weak interfacial strength between Fe-based matrix and diamonds causes diamond particles to fall off prematurely, significantly affecting the cutting efficiency of diamond composites. This work aimed to optimize the interfacial microstructure and mechanical properties of the diamond/Fe-Ni-WC composites by coating a Mo 2 C layer on the diamond particles. The Mo 2 C-coated diamonds were prepared via the molten salt method. Diamond/Fe-Ni-WC composites were sintered by the hot-pressing process under a vacuum. The bending strength of composites with Mo 2 C-coated diamonds was improved from 804 to 996 MPa with the increased coating time. The energy dispersive spectroscopy scanning indicated that the Mo 2 C coating layer changed the interfacial composition between the matrix and the diamonds from Fe–C alloy to Mo 2 C, improving the interface strength. Moreover, the diamond protrusion heights of composites were raised by adding a Mo 2 C interface, resulting in an improvement in the cutting efficiency of impregnated diamond tools.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2023
·
IF 16.5
Wenqian Yang,Ziqian Xue,Jun Yang,Jiahui Xian,Qinglin Liu,Yanan Fan,Kai Zheng,Peiqin Liao,Hui Su,Qinghua Liu,Guangqin Li,Cheng-Yong Su
The selective electrochemical reduction of CO 2 to CO is a promising solution for the design of carbon-neutral, sustainable processes. Achieving a highly selective single reduction product is still challenging because of the energetically favorable competing hydrogen evolution reaction. We report the fabrication of N-doped sponge-like porous graphitic carbon structures embedded with Fe nanoparticles (Fe@NPC) via the pre-modification of a metal-organic framework (IRMOF-3(Zn)) with carboxyferrocene, followed by pyrolysis . The as-prepared Fe@NPC exhibited a 96.4% CO Faradaic efficiency at –0.5 V RHE and good stability. The exceptional CO 2 reduction performance is attributed to the unique structure of the composite catalyst, which provides abundant hierarchical pores that increase CO 2 adsorption and mass transfer, and active Fe sites that synergistically accelerate the kinetics of CO generation. The in situ attenuated total reflectance-Fourier transform infrared analysis provided proof of the improved ability of Fe@NPC to accumulate the crucial intermediate *COOH compared with other pyrolyzed porous carbons. Fe@NPC was used in a Zn-CO 2 battery that delivered a maximum power density of 3.0 mW cm –2 , evidencing its potential for application in energy-converting devices.
✓ 已验证
产品关联
DOI
高影响因子
ANALYST
·
2023
·Vol. 148
·期 12
·2825-2833
·
IF 4.2
Yanwen Chen,Liu Zhao,Baoshuai Zhang,Yuqing Guan,Cheng Yao,Xuan Xu
Due to the vital role of alkaline phosphatase (ALP) in clinical diagnoses and biomedical research, a sensitive and selective detection method for ALP activity is of considerable importance. Herein, a facile and sensitive colorimetric assay for the detection of ALP activity was developed based on Fe–N hollow mesoporous carbon spheres (Fe–N HMCS). Fe–N HMCS were synthesized by a practical one-pot method with aminophenol/formaldehyde (APF) resin as the carbon/nitrogen precursor, silica as the template and iron phthalocyanine (FePC) as the iron source. Thanks to the highly dispersed Fe–N active sites, Fe–N HMCS exhibited exceptional oxidase-like activity. In the presence of dissolved oxygen, Fe–N HMCS were able to effectively convert colorless 3,3′,5,5′-tetramethylbenzidine (TMB) into oxidized TMB (oxTMB) with blue color, while the reducing agent of ascorbic acid (AA) inhibited the color reaction. Based on this fact, an indirect and sensitive colorimetric sensing method was developed to detect alkaline phosphatase (ALP) with the assistance of the substrate L-ascorbate 2-phosphate (AAP). This ALP biosensor exhibited a linear range of 1–30 U L−1 and a limit of detection (LOD) of 0.42 U L−1 in standard solutions. In addition, this method was applied to detect ALP activity in human serum with satisfactory results. This work offers a positive reference for the reasonable excavation of transition metal–N carbon compounds in ALP-extended sensing applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Sustainable Materials and Technologies
·
2023
·
IF 9.6
Chao Wang,Jingyi Zhang,Li Wang,Jianmin Feng,Liqun Wang,Lei Dong,Conglai Long,Dejun Li,Feng Hou,Ji Liang
The crucial step for splitting water is the oxygen evolution reaction . The key to promote this reaction lies in the catalyst. Molybdenum disulfide , as a two-dimensional material with molybdenum and sulfur atoms stacked, is especially suitable as a doping platform to develop high-performance OER catalysts. Fe/Co/Ni ternary transition metal combination has always been a highly active catalytic site for OER. Heteroelement of Fe/Co/Ni doping is expected to effectively modify the local electronic configuration of matrix materials and thus enhances their electrocatalytic OER capability. With this in mind, we report a simple in-situ hydrothermal doping of MoS x nanowires on iron‑nickel alloy foam with ternary transition metal of Fe/Co/Ni. This ternary transition metal of Fe/Co/Ni doped f self-supported electrode (denoted Fe/Co/Ni-MoS x /INF) displays outstanding OER performance in terms of small overpotentials of 214 and 263 mV at current densities of 10 and 100 mA/cm 2 , respectively, in alkaline solution. It was far better than the commercial Ir/C catalysts (253 and 434 mV@10 and 100 mA/cm 2 ). The Tafel slope is about 48.1 mV/dec. Moreover, Fe/Co/Ni-MoS x /INF also has an excellent catalytic stability without any obvious performance decay after 20 h operation. This work contributes to the investigation of high-efficiency OER catalysts based on transition metal-doped MoS x and offers a substitute for noble metal catalysts.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2023
·
IF 7.2
Fushan Wen,Le Pang,Tao Zhang,Xiaoli Huang,Yuan Xu,Yajie Li
The exploitation of the superior oxygen evolution reaction (OER) electrocatalysts is of great paramount importance to the investigation of developing hydrogen production from water splitting to alleviate the energy crisis. Herein, Fe 3+ ion doped NiS 2 for OER electrocatalysts obtained from a metal-organic framework (MOF) as a self-template, with the graphitic phase carbon nitride (g-C 3 N 4 ) as a chain armor, was prepared by the two-step solvothermal-pyrolysis method. The MOF-derived Fe–NiS 2 @g-C 3 N 4 composite achieves a current density of 10 mA cm −2 at a tiny OER overpotential (280 mV) and shows good stability in duration tests over 60 h. Compared with the undoped sample, the overpotential is significantly lower by 60 mV and the stability is substantially improved. In this study, two strategies, iron ion doping and g-C 3 N 4 coating, were implemented to target the defects of NiS 2 , promoting its catalytic activity and achieving a significant improvement in stability at the cost of a bit of activity. Balancing activity and stability maximized has been achieved by our work. This study presents a potential approach to improve the catalyst activity and stability in an integrated strategy.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2023
·Vol. 47
·期 23
·11051-11062
·
IF 3.3
Chengzhi Hu,Changyan Zhou,Huiping Zhang,Ying Yan
Chemical vapor deposition (CVD) and impregnation (IM) methods were applied in the preparation of novel Fe/LTA (Linde Type A) zeolite membrane/paper-like sintered stainless steel fiber (Fe/LTA/PSSF) catalysts for acetone oxidation. The catalysts were characterized using various techniques, such as actual iron loading (AAS), surface morphology (SEM), phase composition and crystallite size (XRD), specific surface area (BET), valence state (XPS) and reducibility (H2-TPR), to investigate the effects of the calcination process, iron loading, preparation methods and supports on their catalytic activity. The calcined catalysts were more active than the non-calcined catalysts in the catalytic oxidation of acetone due to the different oxidation states of the deposited metal species. The catalysts prepared by CVD with an Fe loading of 2.29% exhibited similar activity to the IM-prepared catalysts with Fe loadings of 4.42% and 9.69%, which may be attributed to the superior dispersion of the active Fe2O3 phases, the smaller size of metal oxide and the increased ability for oxygen storage. Among the IM-prepared catalysts, Fe/LTA/PSSF-IM-2 with an Fe loading of 4.42% exhibited the lowest T90 of 230 °C. Additionally, the catalysts coated on LTA/PSSF showed higher activity and contact efficiency (T90 of 249 °C) compared to those on granular zeolite (T90 of 318 °C).
✓ 已验证
产品关联
DOI
高影响因子
Journal of Chemistry
·
2023
·
IF 3
Hao Fu,Aotian Gu,Peng Wang,Chunhui Gong,Zhiying Li,Kai Chen,Yi Yang
The exploration of transforming various metals as metal sources into metal organic frameworks (MOFs) has attracted considerable attention in recent years. This study used triethylamine and 5,6-dimethylbenzimidazole (DMBIM) to modify the iron-doped cobalt zeolite imidazole framework on carbon fiber structure. The results showed that the ZIF(Fe/Co)1.25@CNF exhibited high CEF removal efficiency that over 97% of ceftiofur sodium (CEF) was removed within 10 min, which was significantly higher than that of the common ZIF-67 materials. Compared with other ZIF-67 composites, ZIF(Fe/Co)x@CNF has a larger specific surface area, resulting in a larger contact area and more active sites during the reaction. After the introduction of DMBIM, the ZIF(Fe/Co)1.25@CNF not only easily separated from the solution but also enhanced the hydrophobicity, which provided higher catalytic stability and catalytic performance. In addition, the effects of different catalyst ratios, pollutant concentrations, solution pH, and different radicals (•OH, SO4•−, 1O2) on the activation of peroxymonosulfate (PMS) were investigated. The mechanism of degradation was elucidated by electron paramagnetic resonance experiments. This study provides a new perspective for the preparation of high-performance MOF catalysts with excellent catalytic performance and may facilitate the application of MOF materials in more practical situations.
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·
IF 1.5
Haiyan Wang,Yanan Chen,Wenfu Xie,Xiaoxue Han,Qian Feng,Rong Jiang,Hu Shang,Feifei Zhang,Linna Gao,Zonghua Wang
A novel Pt/Ni-Fe layered double hydroxide (Pt/Ni-Fe LDH) electrocatalyst was fabricated by a two-step facile process for oxidation of methanol in alkaline medium. It is found that Pt/Ni-Fe LDH electrocatalyst exhibits higher electrocatalytic activity, better anti-poisoning ability and stability for methanol oxidation comparing to pure Pt black and commercial Pt/C catalyst. Such an enhancement is probably attributed to the synergistic effect of Ni-Fe LDH and the uniform loading of Pt nanoparticles on the LDH layers. When ionic liquid (IL) was introduced to the composites, the prepared Pt/IL/Ni-Fe LDH exhibits even better electrocatalytic behaviors (205.6 mA mg -1 Pt, I f /I b=5.67) than the Pt/Ni-Fe LDH. Moreover, the morphology and structure of composites were characterized using scanning electron microscope equipped with an energy dispersive X-ray spectrometry, transmission electron microscope, X-ray diffraction, and FT-IR spectra. It is found that the Ni-Fe LDH have a flake-like morphology, the mean diameter of Pt nanoparticles in Pt/Ni-Fe LDH and Pt/IL/Ni-Fe LDH electrocatalyst is 4.36 nm and 3.09 nm, smaller than that in pure Pt black and commercial Pt/C electrocatalyst (8.70 nm and 6.48 nm).
✓ 已验证
产品关联
DOI
高影响因子
ACS Catalysis
·
2023
·
IF 12.9
Heng Shi,Yi He,Yubin Li,Pingya Luo
Fenton-like catalysis based on peroxymonosulfate (PMS) activation has shown great potential in the treatment of organic wastewater. Heterogeneous Fenton-like catalysts containing transition metal active sites are highly efficient for PMS activation. However, the reduction of oxidized metal active sites was usually not prompt due to the sluggish reaction kinetics, which caused the insufficient redox cycle of the metal active sites and further hampered the catalysis efficiency. Recent studies have shown that the synergy effect between photocatalysis and PMS activation may address the above obstacle and boost overall efficiency. However, a deeper understanding of this synergy effect is still missing, making it difficult to be rationally controlled; thus, a poor synergy effect is frequently reported. Herein, a Co/Fe bimetal-doped graphitic carbon nitride (g-C3N4) was designed representatively through systematical characterization and theoretical calculation, the synergy effect was revealed to be profoundly determined by the competitive role of a hole in the system and the adsorbed metastable PMS* on the catalyst surface, and furthermore, the synergy effect can be rationally manipulated; when the Co/Fe doping ratio is 2.5:2.5, the as-prepared g-C3N4 with a moderate valence band position can endow the catalyst with an optimized photo-Fenton-like synergistic effect and the highest catalytic degradation performance. This work sheds light on the rational design of highly efficient photo-Fenton-like catalysts.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Linfang Cui,Jie Hao,Yan Zhang,Xiaomin Kang,Jiujun Zhang,Xian-Zhu Fu,Jing-Li Luo
Fe-, and N-co-doped carbon (Fe N C) electrocatalysts are promising alternatives to Pt-based catalysts for oxygen reduction reaction (ORR); however, simultaneously enhancing their intrinsic activity and exposure of Fe active sites remains challenging. Herein, we report S-modified Fe single-atom catalysts (SACs) anchored on N,S-co-doped hollow porous nanocarbon (Fe/NS-C) for ORR. The unique hollow structure and large surface area of the SACs are favorable for mass/electron transport and exposure of Fe single-atom active sites. The as-prepared Fe/NS-C electrocatalysts display a high-efficiency ORR activity with a half-wave potential of 0.893 V versus the reversible hydrogen electrode and exceed that of the benchmark commercial Pt/C catalyst as well as most reported transition-metal based SACs. Impressively, the Fe/NS-C-based Al-air battery (AAB) displays a high open circuit voltage of 1.48 V, a maximum power density of 140.16 mW cm −2 , and satisfactory durability, outperforming commercial Pt/C-based AAB. Furthermore, Fe/NS-C exhibits considerable potential as a cathode catalyst for application in direct methanol fuel cells. Experimental and theoretical calculation results reveal that the excellent ORR performance of Fe/NS-C can be contributed to the highly active FeN 3 S sites and the unique hollow structure. This work provides new insights into the rational design and synthesis high-performance ORR electrocatalysts for energy conversion and storage devices. of employing ZIF-8 as precursors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）