CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Yuhua Dong,Jianbin Zheng
The work presented that by regulating the proportion between cobalt and 2-methylimidazole in distilled water, a series of Co-based imidazolate framework compounds with diverse shapes were synthesized at ambient temperature. The morphology and structural characteristics of the compounds were surveyed by scanning electron microscope, energy disperse spectra, powder X-ray diffraction and N 2 absorption-desorption. It was found by cyclic voltammetry that the zeolitic imidazolate framework compound synthesized at a ratio of 1:20 had the best electrocatalytic activity to H 2 O 2 reduction, therefore, the compound was chosen to fabricate a H 2 O 2 electrochemical sensor. Electrochemical studies indicated that the sensor had a determination limit of 0.7 μM and short response time within 3 s. The catalytic current was linear with H 2 O 2 concentration from 2.5 to 212.5, 212.5 to 1662.5 and 1662.5 to 6662.5 μM and the sensitivity were 12.2, 5.3 and 2.4 μA mM −1 cm −2 , respectively. Furthermore, the proposed sensor showed a good anti-interference capacity, repeatability and stability.
研究领域:
分析化学
·
材料科学
·
电化学
·
生物传感器
·
纳米材料
·
环境监测
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2019
·
IF 14.229
Liyuan Zhang,Shu Yang,Yuekun Lai,Hui Liu,Yiang Fan,Cao Liu,Haiying Wang,Liyuan Chai
Gaseous Hg 0 is one of the most deadly and hard-to-dispose pollutants. The oxidation of Hg 0 is a promising route, but the rational design and synthesis of highly efficient catalysts still remain grand challenges. Herein, CuO@Cu 2 O (or Cu x O) heterostructured nanoparticles uniformly monodispersing on porous carbon monolith were designed and successfully synthesized using oligo( m -phenylenediamine)-Cu 2+ complex as raw material. The Cu x O-carbon catalyst contains ∼28 wt% of Cu. Based on density functional theory calculation, the CuO@Cu 2 O junction interfaces can accelerate the Hg 0 oxidation by significantly reducing the energy barriers of reaction. Only 1 mg of the catalyst can catalyze the oxidation of more than 90 % of Hg 0 with [HCl] = 0.5 ppm, [O 2 ] = 6 vol%, T = 150 °C. The poisoning effect of either SO 2 or H 2 O on the catalysts is weak. Moreover, a long-term test confirmed that the Hg 0 oxidation rate can maintain more than 90 % even in the co-presence of SO 2 (5000 ppm) and H 2 O (10 vol%).
研究领域:
环境催化
·
材料化学
·
大气污染控制
·
纳米材料
·
表面科学
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2017
·
IF 6.395
Xiubo Xie,Ming Chen,Peng Liu,Jiaxiang Shang,Tong Liu
Nickel sulfides decorated reduced graphene oxide (rGO) has been produced by co-reducing Ni 2+ and graphene oxide (GO), and is subsequently ball milled with Mg nanoparticles (NPs) produced by hydrogen plasma metal reaction (HPMR). The nickel sulfides of about 800 nm completely in situ change to MgS, Mg 2 Ni and Ni multiple catalysts after first hydrogenation/dehydrogenation process at 673 K. The Mg-5wt%NiS/rGO nanocomposite shows the highest hydrogen desorption kinetics and capacity properties, and the catalytic effect order of the additives is NiS/rGO, NiS and rGO. At 573 K, the Mg-NiS/rGO nanocomposite can quickly desorb 3.7 wt% H 2 in 10 min and 4.5 wt% H 2 in 60 min. The apparent hydrogen absorption and desorption activation energies of the Mg-5wt%NiS/rGO nanocomposite are decreased to 44.47 and 63.02 kJ mol −1 , smaller than those of the Mg-5wt%rGO and Mg-5wt%NiS samples. The best hydrogen desorption properties of the Mg-5wt%NiS/rGO nanocomposite can be explained by the synergistic catalytic effects of the highly dispersed MgS, Mg 2 Ni and Ni catalysts on the rGO sheets, and the more nucleation sites between the catalysts, rGO sheets and Mg matrix.
研究领域:
材料科学
·
纳米科技
·
能源化学
·
催化化学
·
储氢材料
✓ 已验证
DOI
高影响因子
Journal of Environmental Sciences
·
2024
·
IF 5.9
Xixian Huang,Bing Yang,Ye Dou,Yang Ding
The abiotic oxidation of divalent manganese (Mn(II)) and the formation of Mn oxides are important geochemical processes, which control the mobility and availability of Mn as well as element cycling and pollutant behavior in soils. It was found that iron (oxyhydr)oxides can catalyze Mn(II) oxidation , but the effects of the coexisting dissolved organic matter (DOM) molecules on the catalysis of different iron (oxyhydr)oxides for Mn(II) oxidation are poorly understood. Herein, we investigated Mn(II) oxidation under the impacts of the interactions between iron (oxyhydr)oxides (i.e., ferrihydrite, goethite and hematite) and DOM molecules. Simultaneously, we elucidated the variations of DOM composition and properties. Our results indicated that the catalysis of iron (oxyhydr)oxides for Mn(II) oxidation was significantly inhibited by DOM. Moreover, DOM had less inhibiting effect on the catalysis of ferrihydrite for Mn(II) oxidation and the formation of Mn oxides (e.g., hausmannite and buserite) relative to goethite and hematite, which was partially because of the higher electron transfer capacities of ferrihydrite. Meanwhile, DOM molecules with high nominal oxidation state of carbon (NOSC), molecular weight, unsaturation and aromaticity were selectively adsorbed and oxidized by Mn oxides , including the oxygenated phenols and polyphenols. The newly formed molecules mainly belonged to phenols depleted of oxygen and aliphatics. Furthermore, NOSC was a key molecular characteristic for controlling DOM composition during DOM adsorption and oxidation by Mn oxides when iron minerals were present. Overall, our research contributes to understanding Mn(II) oxidation mechanisms under heterogeneous systems and behaviors of DOM molecules in the environment.
研究领域:
环境地球化学
·
土壤化学
·
水文地球化学
·
有机-矿物相互作用
·
元素生物地球化学循环
✓ 已验证
DOI
高影响因子
Small
·
2023
·Vol. 19
·期 24
·2207362
·
IF 13.3
Yaqiang Ji,Yuan Zhang,Jiaqi Zhu,Pai Geng,Jonathan E. Halpert,Liang Guo
Flexible pressure sensors play an indispensable role in flexible electronics. Microstructures on flexible electrodes have been proven to be effective in improving the sensitivity of pressure sensors. However, it remains a challenge to develop such microstructured flexible electrodes in a convenient way. Inspired by splashed particles from laser processing, herein, a method for customizing microstructured flexible electrodes by femtosecond laser-activated metal deposition is proposed. It takes advantage of the catalyzing particles scattered during femtosecond laser ablation and is particularly suitable for moldless, maskless, and low-cost fabrication of microstructured metal layers on polydimethylsiloxane (PDMS). Robust bonding at the PDMS/Cu interface is evidenced by the scotch tape test and the duration test over 10 000 bending cycles. Benefiting from the firm interface, the developed flexible capacitive pressure sensor with microstructured electrodes presents several conspicuous features, including a sensitivity (0.22 kPa −1 ) 73 times higher than the one using flat Cu electrodes, ultralow detection limit (<1 Pa), rapid response/recovery time (4.2/5.3 ms), and excellent stability. Moreover, the proposed method, inheriting the merits of laser direct writing, is capable of fabricating a pressure sensor array in a maskless manner for spatial pressure mapping.
研究领域:
生物医学工程
·
柔性电子学
·
微纳加工
·
传感器技术
·
材料科学
✓ 已验证
DOI
高影响因子
DYES AND PIGMENTS
·
2021
·
IF 4.889
Lu Li,Xugang Dong,Zhanfang Liu,Juan Wei,Jingru Li,Hong Zhou,Jun Zhu,Xinwei Shi
In this study, a visual and ultrasensitive method for the determination of trace mercury ions in water was developed based on the high efficiency of urease catalysis and pH-sensitive inverse opal polymeric photonic crystals (IOPPCs). Mercury ions can inhibit urea hydrolysis and suppress the production of ammonium and bicarbonate ions in the solution, resulting in the redshift of IOPPCs. Therefore, the redshift of IOPPCs Bragg diffraction is directly related to the concentration of mercury ions. Meanwhile, the color of IOPPCs varied significantly with the shift of the Bragg diffraction wavelength, thus achieving the visual semi-quantitative detection of mercury ions by the naked eye. The minimum detection concentration of this method is 5 × 10 −16 g/L, which is much lower than the maximum contaminant level for the safe drinking of water (2 × 10 −6 g/L) recommended by the environmental protection agency (EPA), USA. In addition, this is a simple and quick method for effective on-site detection of mercury ions, which shows a great promise in emergency leakage monitoring and control.
研究领域:
分析化学
·
环境监测
·
生物传感器
·
纳米材料
·
分子诊断
·
水污染控制
✓ 已验证
DOI
高影响因子
CATALYSIS TODAY
·
2018
·
IF 4.667
Xintong Zhou,Chang-jun Liu
Structured porous carbon materials have been extensively applied for catalyst, sensor, adsorbent, energy storage materials and many others. However, the preparation of such carbon materials in a controllable way remains a significant challenge. In this work, 3D printing has been employed to prepare porous carbon structures with tailorable pore sizes. A starch/gelatin ink has been applied as carbon source with SiO 2 monodispersed spheres as hard template. The process exhibits an excellent printing accuracy. Controllable meso and macro structures can be thereby obtained. The printed monolithic structures have been used as metal-free catalysts for the selective oxidation of benzyl alcohol, as an illustration. The monolithic and meso/macro-porous structure has a remarkable influence on the reaction rate. A high conversion with high benzaldehyde selectivity has been achieved. The 3D printing strategy provides us a simple, low cost and reliable way of fabricating carbon structures with designable meso/macro-pores, which is promising for many other applications beyond catalysis.
研究领域:
材料科学
·
催化化学
·
能源材料
·
纳米结构材料
·
功能材料
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2023
·Vol. 30
·期 46
·102880-102893
·
IF 5.8
Li Yunhe,Li Hao,Zhao Baogang,Ma Yanming,Liang Peiyuan,Sun Tianjun
The escalating levels of surface ozone concentration pose detrimental effects on public health and the environment. Catalytic decomposition presents an optimal solution for surface ozone removal. Nevertheless, catalyst still encounters challenges such as poisoning and deactivation in the high humidity environment. The influence of support on catalytic ozone decomposition was examined at a gas hourly space velocity of 300 L·g −1 ·h −1 and 85% relative humidity under ambient temperature using Cu-Mn–doped oxide catalysts synthesized via a straightforward coprecipitation method. Notably, the Cu-Mn/SiO 2 catalyst exhibited remarkable performance on ozone decomposition, achieving 98% ozone conversion and stability for 10 h. Further characterization analysis indicated that the catalyst’s enhanced water resistance and activity could be attributed to factors such as an increased number of active sites, a large surface area, abundant active oxygen species, and a lower Mn oxidation state. The catalytic environment created by mixed oxides can offer a clearer understanding of their synergistic effects on catalytic ozone decomposition, providing significant insights into the development of water-resistant catalysts with superior performance. Graphical
研究领域:
环境催化
·
大气污染控制
·
材料化学
·
表面科学
·
催化化学
·
环境工程
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY
·
2019
·Vol. 57
·期 15
·1653-1663
·
IF 2.591
Bin Li,Yan Shi,Zhifeng Fu
Two kinds of Schiff base, N , N ′-dibenzylidene-1,2-diaminoethane (NDBE) and N , N ′-disalicylidene-1,2-diaminoethane, have been found as efficient organic catalyst for reversible complexation-mediated radical polymerization (RCMP) of methyl methacrylate (MMA) for the first time. The polymerization results show obvious features of “living”/controlled radical polymerization. Well-defined and low-polydispersity polymers ( M w / M n = 1.20–1.40) are obtained in RCMP of MMA catalyzed by Schiff base at mild temperature (65–80°C). Moreover, Schiff base also exhibits a particularly high reactivity for RCMP of MMA with in situ formed alkyl iodide initiator. The polymer molecular weight and its polydispersity ( M w / M n is around 1.20) are well controlled even with high monomer conversion. Notably, when the dosage of azo initiator is same as the dosage of iodine, the polymerization could also be realized in the presence of NDBE. The living feature of synthesized polymer is confirmed through the chain extension experiment. In short, Schiff base is a kind of high-efficient catalyst for RCMP and reverse RCMP of MMA, which can be one of the most powerful and robust techniques for polymer synthesis. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1653–1663
研究领域:
高分子化学
·
聚合物合成
·
催化化学
·
功能材料
·
有机合成方法学
✓ 已验证
DOI
高影响因子
PROPELLANTS EXPLOSIVES PYROTECHNICS
·
2024
·Vol. 50
·期 3
·e202400232
·
IF 1.7
Bo Hao,Caixian Xu,Geng Chen,Yuangen Lu,Li Zhang
In response to issues such as poor accuracy and unstable delay times encountered in the practical use of tungsten-based delay compositions, an analysis of the combustion performance of tungsten-based delay compositions with the addition of copper oxide was conducted. This study selected five tungsten-based composite delay compositions prepared by blending tungsten-based delay compositions with copper oxide at different content, aiming to investigate the influence of varying copper oxide proportions on the combustion characteristics of tungsten-based delay compositions. Microscopic morphologies and thermal decomposition behaviors of the tungsten/copper oxide delay compositions were analyzed using scanning electron microscopy (SEM) and differential scanning calorimetry (DSC), while combustion products were examined by X-ray diffraction (XRD). The results indicate that copper oxide exerts a strong catalytic decomposition effect on tungsten-based delay compositions. Specifically, a low concentration of copper oxide enhances the combustion rate of tungsten-based delay compositions, while an increase in copper oxide content subsequently slows down the combustion rate. Notably, tungsten-based delay compositions with 9% copper oxide content demonstrate high precision, good stability, and a relatively slow combustion rate, offering a wider range of adjustability for controlling the combustion speed of delay compositions and providing a feasible method for managing the delay time range in practical applications.
研究领域:
材料科学
·
火工品技术
·
燃烧学
·
无机化学
·
功能材料
✓ 已验证
DOI
高影响因子
Journal of Energy Chemistry
·
2021
·
IF 9.676
Yu Kang,Yujia Han,Cong Wei,Kuo Liu,Ming Tian,Chuande Huang,Chaojie Wang,Jian Lin,Baolin Hou,Xiaoli Pan,Yang Su,Lin Li,Riguang Zhang,Yong Hao,Xiaodong Wang
Thermochemical two-step CO 2 splitting is a potential approach that fixes the sustainable resource into transportable liquid fuels. However, the harsh CO 2 splitting conditions, the limited oxygen release kinetics and capacity of metal oxides block further promoted the CO yield and solar-to-fuel energy efficiency. Here, we propose a different carbon cycle assisted by Ni/La 2 O 3 via coupling methane decomposition with thermochemical CO 2 splitting, replacing conventional metal oxides cycle. Superior performance was demonstrated with methane conversion reached around 94% with almost pure H 2 generation. Encouragingly, CO 2 conversion of 98% and CO yield of 6.9 mmol g −1 derived from CO 2 were achieved, with peak CO evolution rate (402 mL min −1 g −1 ) of orders of magnitude higher than that in metal oxide process and outstanding thermodynamic solar-to-fuel energy efficiency (55.5% vs. 18.5%). This was relevant to the synergistic activation of La 2 O 3 and Ni for CO 2 in carbon cycle, thus improving CO 2 splitting reaction with carbon species.
研究领域:
能源化学
·
催化化学
·
可持续能源
·
热化学转化
·
二氧化碳利用
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2024
·
IF 5.8
Yuxing Sun,Lei Zhao,Juan Yang,Xiang Wang,Huanjun Peng,Jingdong Peng
Light absorption range, recycling stability and charge transfer efficiency are key to the performance of photocatalytic material. Based on these targets, a Al doped TiO 2 catalyst was synthesized by the evaporation-induced process, after processed by NaBH 4 reduction, the black TiO 2 doped with Al was finally prepared. Uv-vis DRS, EPR and XPS analyses confirm the expanded light absorption window (300 nm - 1000 nm) and the introduction of abundant oxygen vacancy after the reduction process. The final product BTiO 2 /Al-0.5 has a degradation rate of about 84 % over the tetracycline hydrochloride within 60 minutes, the reaction rate constant (k) is 10.6 times higher than the unreduced sample. The dramatic change of photocatalytic ability can be assigned to the broadened visible light absorption , increased charge separation efficiency, narrowed band gap and defect-enriched oxygen vacancy . This work offers insights into the fabrication of TiO 2 catalyst and the introduction of oxygen defect.
研究领域:
材料科学
·
光催化
·
环境功能材料
·
纳米材料
·
表面化学
·
半导体催化
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）