RSC Advances
·
2015
·Vol. 5
·期 110
·90904-90912
·
IF 3.84
Yueling Cao,Junwei Wang,Maoqing Kang,Yulei Zhu
Hydrogenolysis of glucose and cellobiose, used as the model feedstocks, over Ni–WO3/SBA-15 catalysts has been investigated to probe the influencing factors for the conversion of cellulose to ethylene glycol (EG). The conversion of glucose and cellobiose to EG showed different dependencies on reaction temperature; a lower reaction temperature was needed for the former. Additionally, the surface atomic ratio of W to Ni on the Ni–WO3/SBA-15 catalysts was the key factor for the product distribution. Both glucose and cellobiose had their own optimum W–Ni ratio for the production of EG, and the ratio of W to Ni for glucose was slightly lower than that of cellobiose. On the other hand, the Ni–WO3/SBA-15 catalysts were thoroughly characterized by N2 adsorption–desorption, X-ray diffraction (XRD), hydrogen-temperature programmed reduction (H2-TPR), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). The results indicated that the reducibility of Ni–WO3/SBA-15 catalysts with high Ni loading was more similar to that of pure NiO. More importantly, the change of surface atomic content of Ni and W of Ni–WO3 catalysts with various Ni loadings resulted from the surface W species of the catalysts being gradually covered by Ni species with the increase of Ni loading.
✓ 已验证
产品关联
DOI
高影响因子
ENERGY & FUELS
·
2013
·
IF 2.853
Jie Liu,Dandan Cheng,Yue Liu,Zhongbiao Wu
One-step synthesized sulfonic-acid-functionalized SBA-15 (denoted as αSSBA-15) impregnated with polyethyleneimine (PEI) was used for CO2 capture in this study. The resulted sorbents were characterized via a range of analytical techniques, including transmission electron microscopy (TEM), 29Si magic angle spinning (MAS) nuclear magnetic resonance (NMR), infrared (IR), thermogravimetry–differential scanning calorimetry (TG–DSC), etc. Experimental results showed that the incorporation of propanesulfonic acid groups into the inner structure of the silica support had brought dramatic improvement in CO2 adsorption capacity, of which PEI/5SSBA-15 showed the highest CO2 adsorption amount. The main reason of this increased capacity could be attributed to the enhanced CO2 diffusion into bulk networks of PEI polymers because of its better dispersion in the pores of support, where the extended propanesulfonic acid groups on the inner surface could spatially disperse the subsequent loaded PEI molecules. Furthermore, the PEI/5SSBA-15 also exhibited superior stable cyclic adsorption/desorption performance compared to PEI/SBA-15, especially after 5 cycles. This was assumed because the enhanced surface acidity of PEI/5SSBA-15 anchored the NH2/NH groups through acid–base interaction, reducing the loss of active sites.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2015
·Vol. 23
·期 2
·529-537
·
IF 1.108
Ma Beibei,Zhuang Linzhou,Chen Shuixia
The well-ordered hexagonal short-pore SBA-15 (SSBA-15) has been successfully synthesized via an energy-efficient process under the microwave-hydrothermal condition, in which the formation duration [stirring duration (ripening step) and microwave-hydrothermal treatment duration (aging step)] has been greatly decreased from 48 h for conventional hydrothermal treatment to <2 h. The extension of the ripening duration led to the evidently improved uniformity and regularity of particles while the increase of aging duration resulted in less intrawall pores and more structural mesopores. The optimal condition to get highly ordered SSBA-15 in this work was the duration of 2 h for both steps, and the SSBA-15 obtained was composed of cuboid-like particles, whose pore length was ca. 450 ± 50 nm and pore size was around 10 nm. The SSBA-15 was modified with different amine agents to prepare solid amine adsorbent, the obtained adsorbents showed considerable CO 2 adsorption ability, indicating that this fast-prepared SSBA-15 can be a promising support of CO 2 adsorbents.
✓ 已验证
产品关联
DOI
高影响因子
Materials
·
2024
·Vol. 17
·期 8
·1812
·
IF 3.1
Wanlu Xu,Wenwu Wang,Xiaoshan Zhang,Ping Yu
Positive temperature coefficient of electrical resistivity (PTCR) materials with low Curie temperature have been paid increasing attention lately. In this study, PTCR materials with a Curie temperature of approximately −15 °C were investigated by La3+doping Ba0.55Sr0.45TiO3ceramics. It could be expected to meet the requirements of thermal management systems for low-temperature control. In addition, a trace amount of Bi0.5Na0.5TiO3(BNT) was employed to improve the resistivity and the PTCR performance. A significant PTCR effect was achieved with a high resistivity jump of nearly four orders of magnitude, a high temperature coefficient of ~28.76%/°C, and a narrow transition temperature span of 22 °C in the (Ba0.55Sr0.45)0.99875La0.00125Ti1.01O3-0.0025Bi0.5Na0.5TiO3ceramics. The PTCR enhancement mechanism of BNT is discussed.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Yuwei Yan,Hongyan Li,Songnan Li,Jiawei Zhang,Jingxiang Zhao,Qinghai Cai
PdCl 2 -FeCl 3 -imidazolium ionic liquid immobilized SBA-15 (SIL-PdFe) was prepared via chloropropyltriethoxysilane grafting with the surface Si-OH and N-methyl imidazole with C-Cl bond, followed by PdCl 2 and FeCl 3 coordinating to imidazolium ring. The SIL-PdFe was used as a heterogeneous catalyst for solvent-free Wacker oxidation of styrene with H 2 O 2 oxidant, exhibiting high catalytic performance with styrene conversion of 95.4% and 87.7 % selectivity (54.2% acetophenone and 33.5% benzaldehyde). The catalyst can be easily recovered and effectively reused without a significant loss in the activity and selectivity. The quenching experiments by adding tert -butanol (TBA), 1,4-benzoquinone (p-BQ) and furfural alcohol (FA) in the reaction system were conducted to identify kind of the reactive O species produced by the catalyst activating H 2 O 2 and the reaction mechanism of the Wacker oxidation was then proposed.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2024
·
IF 2.7
Jiajie Xue,Lingjun Kong,Wei Lin,Jiasheng Zhang,Youzhi Zhu
The development of sensitive breast cancer biomarker (CA 15-3) measurement techniques is of great significance for the early diagnosis and therapeutic monitoring of breast cancer worldwide. Herein, we have designed a split-type photoelectrochemical (PEC) immunoassay platform for the ultrasensitive determination of CA 15-3 using In2O3/ZnIn2S4 heterojunctions with high photovoltaic conversion performance as a photoactive substrate. Efficient photocurrent-responsive In2O3/ZnIn2S4 was formed by surface loading narrow-bandgap ZnIn2S4 on MOF-derived wide bandgap In2O3 nanomaterials. Subsequently, a sandwich immunoreaction was performed using an alkaline phosphatase (ALP)-labeled secondary antibody as a signaling indicator to produce large amounts of ascorbic acid by enzymatic biocatalysis. Since ascorbic acid is an excellent electron donor capable of promoting photogenerated electron separation in semiconductor materials, it enhances the anodic photocurrent of In2O3/ZnIn2S4-modified electrodes. Under the optimal catalyst loading and immunoreaction time, the In2O3/ZnIn2S4-based PEC immunoassay showed a good photocurrent response to CA 15-3 over a wide detection range from 1.0 mU mL−1 to 10 000 mU mL−1 with a limit of detection of 0.45 mU mL−1. Owing to the excellent photocurrent response of In2O3/ZnIn2S4 to ascorbic acid and the split-type immunoassay protocol, the constructed PEC immunosensing platform has the advantages of high precision, anti-interference, and acceptable accuracy, and the results are equivalent to those of commercial enzyme-linked immunosorbent assay (ELISA) kits.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY
·
2024
·
IF 3.1
Zhang Hongjun,Li Yichao,Wei Litian,Wang Zhao,Zhang Yinjun
A recombinant esterase, BaCE m , derived from Bacillus aryabhattai and heterologously expressed in Escherichia coli , was successfully immobilized on polyethyleneimine-impregnated mesoporous silica SBA-15. This immobilization utilized glutaraldehyde as a crosslinker. Optimal conditions were established with a PEI/SBA-15 ratio of 25% (w/w), a pH of 7.5, and a glutaraldehyde concentration of 0.5% (w/w), resulting in a loading capacity of 76.4 mg/g, a recovery activity of 43.5%, and a specific activity of 7917 U/g for BaCE m . The immobilized BaCE m demonstrated high enantioselectivity, with an “E” value of 203.92, in the resolution assay of ( R , S )-ethyl indoline-2-carboxylate. Notably, the immobilized enzyme, compared to its free counterpart, exhibited enhanced thermostability, maintaining 95.4% of its activity after 3 h at 30 °C. It also showed significant tolerance to organic solvents, retaining 48.4% and 28.7% residual activity in 10% v/v acetonitrile and acetone, respectively. Moreover, its storage stability was confirmed, with 68.5% residual activity preserved after 30 days at 4 °C. Remarkably, the immobilized BaCE m retained 58.1% of its activity after 10 reuse cycles, underscoring the potential of polyethyleneimine-impregnated mesoporous silica SBA-15 as an effective support for enzyme immobilization, promising for industrial applications. Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2025
·
IF 4.8
Ting Wu,Xiang Zhang,Hongju Liang,Quan Wang,Chun-Ling Liu,Wen-Sheng Dong
The design of highly efficient and cost-effective catalysts for the conversion of biomass-derived 5-hydroxymethylfurfural (5-HMF) into sustainable liquid fuel 2,5-dimethylfuran (DMF) is both important and challenging. In this study, we developed a non-noble Co catalyst supported on SBA-15 (25Co/SBA-15). Our results demonstrate that this catalyst exhibits remarkable efficiency in selectively hydrodeoxygenating 5-HMF to DMF, achieving a DMF yield of 96.3 % with complete conversion of 5-HMF under mild reaction conditions (150 °C, 2.0 MPa H 2 for 2 h). Notably, the productivity rate of DMF reached an exceptional value of 19.1 mmol·gcat −1 ·h −1 , surpassing most previously reported catalysts in literature. Additionally, by utilizing two distinct solvents - N,N-dimethylformamide (N,N-DMF) resulting in a high yield of 2,5-bis(hydroxymethyl)furan (BHMF) and tetrahydrofuran (THF) yielding an even higher yield of DMF - our approach enables facile switching between these two products during hydrogenation over the Co/SBA-15 catalyst. Furthermore, our catalyst demonstrates excellent reusability and can be easily regenerated through calcination in air. The exceptional catalytic performance of the catalyst can be ascribed to the synergistic effect between metallic Co and adjacent Lewis acidic Co 2+ in CoO dispersed on the surface of SBA-15. A dual-site Langmuir–Hinshelwood–Hougen–Watson (LHHW) model was proposed for the hydrodeoxygenating 5-HMF to DMF.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2020
·Vol. 44
·期 25
·10428-10440
·
IF 3.288
Hai-tao Wu,Lan-zhi Wang
Unique green-chemistry approaches have been developed for the one-pot synthesis of two series of novel 1,5-benzodiazepines 4 and 5. The CeCl3-KI promoted two-component domino reaction of 1,2-phenylenediamines with 1,3-acetonedicarboxylate in ethanol afforded novel 1,5-benzodiazepin-2-ones 4. An expedient approach to 1,5-benzodiazepines 5 has also been developed via three-component domino reactions using 1,2-phenylenediamines, 1,3-acetonedicarboxylate and aldehydes in the presence of a catalytic amount of magnetic nanoparticles (γ-Fe2O3@SiO2/CeCl3) in ethanol at ambient temperature. During the one-pot synthesis, one new seven-membered nitrogen heterocycle (diazepin) and four new bonds (one C–C, two C–N and one CC) were constructed by nucleophilic addition, elimination (dehydration, etc.), hydride transfer and cyclization reactions. The structures of all 48 products were fully confirmed by spectroscopic techniques and by single-crystal X-ray analysis for 5db. Moreover, plausible synthesis reaction mechanisms of two series of novel 1,5-benzodiazepines 4 and 5 have been proposed. The methods have advantages such as operational simplicity, mild reaction conditions, short reaction time, easy recovery and reusability of the catalyst, high yields of products, and the use of non-toxic EtOH as the solvent.
研究领域:
有机化学
·
药物化学
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2016
·
IF 4.758
Hongran Zhao,Tong Zhang,Rongrong Qi,Jianxun Dai,Sen Liu,Teng Fei,Geyu Lu
Mesoporous silicas loading hydrophilic materials composites were widely used in humidity sensors during the last decade. However, the physical mixing process used for loading the hydrophilic materials in the channel of mesoporous silicas is hard to guarantee their uniform dispersion, and there is no strong force to bind the host and guest materials together. To solve above problems, novel vinyl functionalized mesoporous silicas (SBA-15-vinyl) were chemically modified with hydrophilic sodium p -styrenesulfonate (SSS) with free radical polymerization . The chemical and porous structures of the obtained hybrid materials (SBA-15-PSSx) were characterized by fourier transform infrared spectroscopy (FT-IR), elemental analyses (EA), X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM) and N 2 adsorption-desorption. The humidity sensing properties of the sensors based on SBA-15-vinyl and SBA-15-PSS indicate the introduction of PSS could effectively enhance the sensing properties of SBA-15-vinyl. The impedance of the optimized sensor changed by more than three orders of magnitude over the relative humidity (RH) range of 11%–95%, with rapid response to RH change.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2018
·
IF 5.08
Zhifeng Xu,Peihong Deng,Junhua Li,Siping Tang,Ying Cui
In order to improve the diffusion kinetics of molecularly imprinted materials (MIMs), applying imprinting technology to mesoporous materials is a promising strategy. In the present study, an imprinting approach based on the combination of mesoporous silica materials and molecular imprinting technology is reported. Molecularly imprinted material (MIM) for 2,4-dichlorophenoxyacetic acid (2,4-D) was prepared by using 2,4-D as the template molecule, alkyne-modified β-cyclodextrin and propargyl amine as the combinatorial functional monomers and SBA-15 as the supporter. The functional monomers were anchored to the azide-modified SBA-15 by azide–alkyne Click reaction. The synthesized MIM was characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), elemental analysis (EA), thermal gravimetric analysis (TGA), low-angle X-ray diffraction (XRD) and N 2 adsorption–desorption analysis. The interactions between template and functional monomers were studied by proton NMR analysis and UV–vis experiments. The results of the equilibrium binding experiments and selective tests showed that the prepared MIM has binding affinity and specificity for a group of analytes which have similar size and shape to those of template. Binding kinetic experiments demonstrated that the present imprinting approach can effectively enhance the mass transfer rate. The solid phase extraction of 2,4-D using MIM as the adsorbent was investigated. The extraction conditions for the processes of loading, washing and eluting were optimized. The recoveries of the molecularly imprinted solid phase extraction (MISPE) column for 2,4-D were 76.3–88.9% with relative standard deviations (RSD) of 3.48–7.64%.
研究领域:
材料科学
·
分析化学
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CHEMISTRY
·
2012
·Vol. 30
·期 7
·1571-1574
·
IF 0.755
Jing Cao,Yang Li,Junxiang Feng
Two kinds of novel styryl chemosensory 2-FMNC and 3-FMNC, were designed and synthesized by an apporiate introduction of 9-benzylidene-9 H -fluorene group as fluorophore with the aim at avoiding photoisomerisation. These 9-benzylidene-9 H -fluorene derivatives showed the similar selectivity and sensitivity upon addition of metal ions. The sensitivity of FMNC to alkaline earth metal ions was Ba 2+ >Sr 2+ >Ca 2+ ≈Mg 2+ .
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）