JOURNAL OF CONTROLLED RELEASE
·
2023
·
IF 10.8
Ying Chen,Sibu Wang,Qin Ma,Xingjie Wu,Qianqian Guo,Xinghong Luo,Ling Tao,Xiangchun Shen
Nanocarriers are easily captured by endosomes, where the abundant hydrolases inevitably destroy the nanocarriers and the drugs they carry, ultimately resulting in a compromised or lost therapeutic efficacy. Herein, we report a membrane-lytic mechanism-based Pickering emulsion that can in turn utilize this seemingly unfavorable endosomal capture behavior for tumor therapy. This Pickering emulsion is constructed as an oil-in-water (O/W) emulsion stabilized by the hybrid nanoparticles (HNPs) composed of two molecules with opposite charges, cetyl trimethylamine bromide (CTAB) and linoleic acid (LA), through electrostatic interaction (defined as [email protected] ). After [email protected] enters the lysosomes through macropinocytosis-mediated endocytosis, LA can be protonated in response to the acidic stimulus, and causing the swelling or disintegration of HNPs due to the disrupted electrostatic interaction. The released CTAB holds strong membrane-lytic activity and can directly damage the lysosomal membranes. Under the acidic condition and the participation of excessive iron ions (II) in lysosomes, LA induces lipid peroxidation and the resulting lipid peroxides (LPO) will oxidize the lysosomal membranes, collectively causing the leakage of lysosome membranes and the release of contents into cytoplasm. Subsequently, the diffused CTAB and LPO will continue to attack the mitochondrial membranes and cell membranes , resulting in the death of different types of tumor cells both in vitro and in vivo due to membrane damage. This Pickering emulsion with membrane-lytic ability represents a potential self-anticancer nanocarrier.
研究领域:
药学
·
纳米技术
·
癌症治疗
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2016
·Vol. 23
·期 19
·19450-19460
·
IF 2.76
Zhou Qiongzhi,Li Feng,Ge Fei,Liu Na,Kuang Yangduo
Toxicants are generally harmful to biotechnology in wastewater treatment. However, trace toxicant can induce microbial hormesis, but to date, it is still unknown how this phenomenon affects nutrient removal during municipal wastewater treatment process. Therefore, this study focused on the effects of hormesis induced by cetyltrimethyl ammonium bromide (CTAB), a representative quaternary ammonium cationic surfactant, on nutrient removal by Chlorella vulgaris F1068. Results showed that when the concentration of CTAB was less than 10 ng/L, the cellular components chlorophyll a , proteins, polysaccharides, and total lipids increased by 10.11, 58.17, 38.78, and 11.87 %, respectively, and some enzymes in nutrient metabolism of algal cells, such as glutamine synthetase (GS), acid phosphatase (ACP), H + -ATPase, and esterase, were also enhanced. As a result, the removal efficiencies of ammonia nitrogen (NH 4
+ ) and total phosphorus (TP) increased by 14.66 and 8.51 %, respectively, compared to the control during a 7-day test period. The underlying mechanism was mainly due to an enhanced photosynthetic activity of C. vulgaris F1068 indicated by the increase in chlorophyll fluorescence parameters (the value of Fv / Fm , ΦII, Fv / Fo , and rETR increased by 12.99, 7.56, 25.59, and 8.11 %, respectively) and adenylate energy charge (AEC) (from 0.68 to 0.72). These results suggest that hormesis induced by trace toxicants could enhance the nutrient removal, which would be further considered in the design of municipal wastewater treatment processes.
The schematic mechanism of C. vulgaris F1068 under CTAB induced hormesis. Green arrows ( ) represent the increase and the red arrow ( ) represents the decrease.
研究领域:
环境科学
·
微生物学
·
生物技术
·
废水处理
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMOSPHERE
·
2022
·
IF 8.943
Liyun Zhang,Yi He,Pingya Luo,Lan Ma,Shuangshuang Li,Yiling Nie,Jing Yu,Xiao Guo
Considering the emulsified oil and water-soluble dyes in wastewater, the exploitation of easy-manufacturing, energy-saving and high-efficiency separation materials is urgently required. In this work, integrating the positively charged polyethyleneimine (PEI) with negatively charged CNTs-COOH constructed the superhydrophilic Cassie–Baxter structure onto the electrospun polyacrylonitrile (PAN) membrane surface by ultrasonic, electrostatic interaction and thermal treatment. Based on it, the PEN@CNTs membrane achieved efficient separation for surfactant-free, tween 80-stabilized, SDS-stabilized, and CTAB-stabilized emulsions (the fluxes reached 508–3158 L m −2 h −1 , the separation efficiency reached 99.42%) by the splendid water-penetration and oil-repellency, electrostatic interaction, and “aperture sieve”. Moreover, because of the porosity and strong charged surface of PEN@CNTs membrane, the anionic dyes can be quickly removed by one-step filtrate method (∼403 L m −2 h −1 ). Meanwhile, the PEN@CNTs membrane also achieved synchronous and efficient remediation for oil/dye mixture emulsions after many cycles. More importantly, facing the complex physical and chemical environments, the combination of the stabilized PEN membrane, inactive CNTs-COOH layer, and the bond of embedding method between CNTs-COOH and PEN nanofibers made the PEN@CNTs membrane demonstrated robust stability and durable separation capability.
研究领域:
环境科学
·
材料科学
·
水处理
·
纳米技术
✓ 已验证
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2018
·
IF 2.829
Yue Zhang,Caili Dai,Yao Qian,Xiqun Fan,Jianfeng Jiang,Yining Wu,Xuepeng Wu,Yongping Huang,Mingwei Zhao
A novel nanoparticle-enhanced VES fracturing system was proposed based on the conventional viscoelastic surfactant (VES) fracturing fluid composed of cetyltrimethylammonium bromide (CTAB) and sodium salicylate (NaSal). Hydrophilic silica nanoparticles were used as the addition agent in this system for enhancing properties of VES fracturing fluid. The formation of wormlike micelles by CTAB and NaSal was investigated by cryogenic transmission electron microscopy (cryo-TEM). Rheological properties of the nanoparticle-enhanced VES fracturing system were discussed in detail. With the addition of nanoparticles, the nanoparticle-enhanced VES fracturing system has higher viscosity and viscoelasticity than conventional VES fracturing fluid without nanoparticles. Constant shearing and variable shearing measurements showed the shear-resistant and restoration properties of nanoparticle-enhanced VES fracturing system. This enhancement was due to the formation of newly micelle-nanoparticle junctions and a mechanism was proposed. Formation dynamic filtration damage (DFD) measurement was conducted to study damage effects of the nanoparticle-enhanced VES fracturing system on the core. In addition, cores before and after DFD were characterized by scanning electron microscopy (SEM), showing the formation of nano-filter cake. The contact angle of water on the core surface decreased after DFD, showing stronger hydrophilicity . This work could further develop the application of nanotechnology and colloid on reservoir fracturing system.
研究领域:
石油工程
·
纳米技术
·
胶体科学
·
材料科学
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Xu Li,Chunsheng Pu,Yun Bai,Feifei Huang
Multiwalled Carbon nanotube (MWCNT) serves as one of emerging and attractive materials for stabilizing foams due to its small size, special surface property and rod-like structure. The combination of MWCNT and surfactant has been regarded as an effective strategy to improve foam stability in porous media . However, the effects of surfactant types on the dispersity of MWCNT and on the stability of MWCNT stabilized foams have yet to be clearly understood. More importantly, the lack of comprehensive study of the synergistic interactions between surfactants and MWCNTs seriously limits the understanding of MWCNT’s foam-stabilizing mechanism, restricting its application as the foam stabilizer . Herein, this paper aims to systematically study the foam-stabilizing performance and mechanism of different surfactant/MWCNT foam systems. Combining with the experimental results obtained from ultraviolet and visible spectrophotometry and zeta potential tests, environmental scanning electron microscope analyses, contact angle measurements, optical microscope observations, and surface tension and dilational viscoelastic modulus determinations, the foam-stabilizing mechanism of different surfactant/MWCNT foam systems can be conjectured as follows. Compared with anionic and nonionic surfactants (SDS and OP-10) modified MWCNT, the MWCNT modified by the cationic surfactant (CTAB) can yield better dispersity due to the larger electrostatic repulsion and higher steric resistance between MWCNTs after the adsorption of CTAB . The highly dispersed MWCNTs have small sizes, which make them enter the foam film easily and tend to aggregate at Plateau border. These aggregations can significantly slow down the film drainage. In addition, MWCNTs can improve the viscosity of foam film, which helps to increase the resistance of gas diffusion and mitigate bubble coalescence . After being adsorbed by surfactants, the modified MWCNT can adsorb on the air-water interface. Due to the higher detachment energy, the CTAB modified MWCNT has a stronger adsorption capacity at the air-water interface compared with SDS and OP-10 modified ones. This tight adsorption can improve the dilational viscoelastic modulus and thus enhance foam stability. Finally, the dual-sand pack experiments proved that the CTAB/MWCNT stabilized foams have good potential for conformance control in heterogenous reservoirs.
研究领域:
材料科学
·
化学工程
·
胶体与表面化学
·
石油工程
✓ 已验证
DOI
高影响因子
CATALYSIS LETTERS
·
2023
·
IF 2.8
Hao Runming,Du An,Zhu Qingling,Wu Xue,Liu Sijia,Wang Ke,Wang Yang
5-Hydroxymethylfurfural (HMF) is a high value-added platform compound, converted into bio-based polyesters and biofuels etc. In this paper, we used two commercially available hexamethylenimine and cetyltrimethylammonium bromide (CTAB) as the structure-directing agents to synthesize HMWW zeolite nanosheets via one step. A series of HMWW zeolite nanosheets with different disorder index ( DI ) were controllably prepared by adjusting the amount of CTAB, operating also as an in situ exfoliating agent, converting fructose into HMF in the tetrahydrofuran/NaCl-H 2 O biphasic solvent with low boiling point. Successful construction of disordered HMWW zeolite nanosheets was verified by PXRD. Further characterizations by BET, SEM and TEM etc. show that HMWW 4.0 with the optimum DI of 0.67 has a disordered network-like arrangement of layers with the external surface area of 224 m 2 /g and the mesoporous size of 3.5 nm. Catalytic evaluations showed that HMF selectivity was closely related to DI of the catalysts. Under the optimized DI , fructose molecules are readily accessible to acidic sites on the external surface while larger external surface area is exposed. The HMWW 4.0 zeolite catalyzed fructose dehydration in the biphasic solvent, producing 90% HMF selectivity with 93% fructose conversion at 140 °C for 6 h. In the reuses of the HMWW 4.0 catalyst, HMF selectivity was around 90% with fructose conversion decreasing by ca. 10% after six runs, indicating that it possesses the promising stability. Graphical Abstract
研究领域:
化学
·
材料科学
·
催化
·
纳米技术
·
生物化学
✓ 已验证
产品关联
DOI
高影响因子
POLYMER
·
2023
·
IF 4.6
Liang Liu,Yunxin Chen,Chunxia Zhao,Min Guo,Yuanpeng Wu,Yuntao Li,Dong Xiang,Hui Li,Li Wang,Xiaoyan Zhang
Traditional hydrogel-based strain sensors do not work well under water due to extreme swelling and poor adhesion to substrates in water-rich conditions. Inspired by the jellyfish tentacles, a super stretchable dual crosslinked hydrogel was prepared as a motion sensor underwater. The hydrogel contained a cationic surfactant , hexadecyl trimethyl ammonium bromide (CTAB), that crosslinked with hydrophobic lauryl methacrylate (LMA) units in an AA-LMA copolymer . Al 3+ ions also coordinated with carboxyl groups in PAA chains and amino groups on chitosan (CS) to form ionic crosslink points. The formed hydrogel exhibited excellent anti-swelling characteristics, superior tensile properties (≈3000%), and rapid self-healing performance. Due to the complementary effects of electrostatic interactions and dynamic chemical bond formation, the hydrogel efficiently and repeatably adhered to various biological tissues, such as hogskin and shrimp, in aquatic environments. Moreover, the hydrogel-based strain sensor showed high sensitivity (GF = 2.04) over a wide sensing range from 0 to 1000% strain with high stability in air and water. The prepared materials' unique performance further expands their application prospects in flexible wearable devices , anti-counterfeiting recognition, and other fields in environmental conditions.
研究领域:
材料科学
·
生物医学工程
·
可穿戴技术
·
传感技术
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2020
·
IF 4.469
Chen Hua,Kaimin Chen,Zun Wang,Xuhong Guo
Cationic latexes have received wide attention due to their special properties and potential applications in wood coatings, fabric treatment, etc. However, the practical application of cationic latexes was hindered due to their poor stability, especially the alkali resistance stability. In this work, various stable cationic polyacrylate latexes were prepared by an efficient route. Three cationic comonomers, i.e., methacrylatoethyl trimethyl ammonium chloride (DMC), 2-(dimethylamino)ethyl methacrylate (DMAEMA), and 2-aminoethyl methacrylate hydrochloride (AEMH), were used in the aqueous semi-continuous seeded emulsion polymerization of methyl methacrylate (MMA) and butyl acrylate (BA) using cetyl trimethyl ammonium bromide (CTAB) and 2,2′-azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (AIBI) as the cationic emulsifier and initiator, respectively. The alkali resistance of the latex could be significantly improved by the addition of cationic monomer DMC and be simply tuned by adjusting DMC dosage. The improved stability of the latex might originate from the higher charge density on the surface of the latex by the introduction of DMC. Moreover, the effects of initiator dosage, emulsifier dosage and different cationic comonomers on the latex preparation and the film properties were also systematically investigated. This work not only introduces an efficient route to prepare cationic latexes with superior stability, but also paves the way for latexes to be used in applications such as textile finishing, paper industry, and biomedical field, etc.
研究领域:
材料科学
·
化学工程
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2014
·
IF 4.058
Jiale Huang,Dengpo Huang,Yi Liu,Huimei Chen,Xiaolian Jing,Daohua Sun,Qingbiao Li
Gold recovery is of practical significance while functional Au nanostructures are of great interest in modern nanotechnology. In this work, highly and hierarchically branched Au nanowires (AuNWs) were produced to obtain bio-AuNW composites while the Au was effectively recovered from aqueous HAuCl 4 solution by a microorganism-mediated, surfactant-directed (MSD) approach with Lactobacillus spp. cells (LSCs). Ternary coordination of the cell-surfactant-AA played an important role in recovering Au and producing the bio-AuNW composites in the cases of tetradecyl trimethyl ammonium bromide (TTAB), hexadecyltrimethylammonium bromide (CTAB) and octadecyl trimethyl ammonium bromide (OTAB). In contrast, Au recovery could not be achieved with hexadecyltrimethylammonium chloride (CTAC). Strong interaction between [AuCl 4 ] − and the LSCs prior to addition of surfactant (except CTAC) and ascorbic acid (AA) was vital for the highly and hierarchically branched nanostructures. Furthermore, the bio-AuNW composites could serve as excellent surface-enhanced Raman spectroscopy (SERS) substrate. the SERS detection limits of toxic rhodamine 6G (R6G) and 4-mercaptobenzoic acid (MBA) with the bio-AuNW composites are down to 10 −9 and 10 −6 M, respectively. This work therefore exemplifies combining recovery of Au and fabrication of functional Au nanomaterials, which was environmentally benign and application-oriented.
研究领域:
环境科学
·
纳米技术
·
材料科学
·
生物技术
✓ 已验证
产品关联
DOI
高影响因子