文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2209至2220个,产品总数347,389个

切换升序
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2026 · IF 5.4

Functional inhomogeneous salt-hydrogel PVA/PAM/lithium nitrate trihydrate with reversible adhesion, mechanical and humidity sensitivity

Lin Liu,Xintong He,Yuqi Zhao,Peipei Guo,Hai Fu,Wei Cui

Hydrogels, as a class of functional material, have been used in various fields such as flexible sensors, actuators, and energy devices. Nevertheless, their practical application is often hampered by the poor mechanical properties and susceptibility to dehydration. In this work, using hygroscopic salt lithium nitrate trihydrate (LNH) as the phase-change material, PVA/PAM/LNH salt hydrogels were prepared in a mixture of water and glycerol. The mechanical performance of the hydrogels reached to 326 kPa from 31.5 kPa after the crystallization triggered by crystal seed at room temperature. Since phase transition triggered by crystal seed primarily occurs at the hydrogel surface, the surface contains a higher concentration of LNH crystals, forming an inhomogeneous structure. The composite hydrogel exhibits reversible adhesion, higher water retention ability enabling it to maintain long-term flexibility at low relative humidity. Moreover, the abundant Li + ions present in the gel enable high conductivity, humidity sensitivity and contribute to the piezoelectric and piezoresistive capabilities.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SENSORS AND ACTUATORS A-PHYSICAL · 2026 · IF 5.1

Annealing temperature-regulated oxygen vacancy engineering in In2O3 nanorods for enhanced room-temperature NO2 sensing: Experimental investigation and DFT verification

Ruojin Zhang,Yuhang Du,Longyu Ren,Jiliang Yuan,Mengmeng Xie,Zhaohui Liu,Xiuze Li,Jieqiang Wang,Hongyan Xu

High-performance sensors for toxic gases have been the goal of research in the industry. In this study, In 2 O 3 nanorods were grown on ceramic tubes using a hydrothermal method, and a series of gradient annealing temperatures were set to obtain different samples through annealing in air atmosphere. Among them, In 2 O 3 annealed at 400 °C (In 2 O 3 -400) showed the highest oxygen vacancies and chemical adsorbed oxygen ratio. The gas sensing performance test demonstrated that In 2 O 3 -400 exhibited excellent sensitivity to NO 2 at room temperature, its response was 4.58 at 500 ppb and 146.58 at 50 ppm. Density functional theory (DFT) analysis was used to study the adsorption mechanism of nitrogen dioxide on pure In 2 O 3 and In 2 O 3 with V O materials, showing that the existence of oxygen vacancies enhanced the adsorption capacity of In 2 O 3 for NO 2 , and the DFT calculation results were in accordance with the experimental data. This study determined the optimal annealing process conditions, providing theoretical and experimental support for the development of high-performance room-temperature In 2 O 3 -based NO 2 gas sensing devices.

CAS / MDL: 22519-64-8 57-13-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
REACTIVE & FUNCTIONAL POLYMERS · 2026 · IF 5.4

A biomass hydrogel electrolyte with a 3D dynamic interpenetrating network structure exhibting enhanced self-healing and electrochemical performances

Xia Wang,Tengda Sun,Zhuojiao Liu,Xin Wang,Hao Zhang,Chenhui Yang,Aibo Zhang

A self-healing hydrogel electrolyte was fabricated by integrating CNTs-COOH as a three-dimensional conductive scaffold, demonstrating synergistic properties of enhanced electrochemical performance and biodegradability. This well-designed strategy for introducing CNTs-COOH can not only improve the mechanical properties and self-healing performance of the hydrogel electrolyte, but also booste its electrical conductivity. The results showed that when CNTs-COOH content was 0.1 wt%, the tensile strength of the CPZC-0.1C gel reached 63.93 kPa, up from 17.78 kPa, while the stress self-healing efficiency achieved 98.49%. More critically, the battery assembled with CPZC-0.1C delivered an ionic conductivity of 2.63 × 10 −3  S cm −1 , retained ∼73% of its initial capacity after 2000 cycles at 2 A g −1 , with a Coulombic efficiency close to 91%, exhibited satisfactory long-term cycling stability, good rate capability and excellent Coulomb efficiency. Even after three cut/self-healing events within 200 cycles, the battery still maintained ∼60% of its capacity, evidencing outstanding multi-cycle self-healing stability. The electrochemical performance of the healed battery is virtually identical to that of the pristine battery. Moreover, CPZC-0.1C gel electrolytes are environmentally safe and ambietly degradable, making them sustainable candidates for eco-friendly batteries with promising application prospects.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Food Bioscience · 2026 · IF 6.2

Evaluation of Physicochemical Properties, Bioactivities, Flavor Profiles and Key Metabolites during Tamarind Pulp Fermentation by Kluyveromyces marxianus

Anna Yang,Chunmei Yuan,Siyan Huang,Zibo Song,Tao Wang,Zhijia Liu,Junjie Yi,Chuanqi Chu

To improve the flavor of tamarind and enhance its market prospects, Kluyveromyces marxianus was used to ferment tamarind pulp. The physicochemical properties, bioactive components, and flavor compounds of the tamarind pulp were determined. The mechanism underlying flavor formation in the fermented tamarind pulp was further explored from the perspectives of metabolomics and transcriptomics. During fermentation, the malic acid content increased significantly from 85.92 mg/100 mL to 546.76 mg/100 mL. Electronic nose analyses indicated a time-dependent enhancement of aroma complexity in fermented tamarind pulp. 3-Methyl-1-butanol, phenethyl alcohol, isoamyl acetate and phenethyl acetate were the dominated volatile compounds. The emergence of these flavor compounds markedly altered and enriched the aroma profile of tamarind pulp. However, the levels of flavor-contributing amino acids in the tamarind pulp decreased, though they were likely utilized by the yeast to generate new flavor compounds and support its growth. Transcriptome profiling revealed significant enrichment of pyruvate metabolism, amino acid degradation, and redox-related processes, providing molecular evidence for metabolic reprogramming in the yeast strain.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2026 · IF 9.1

Highly oriented mixed-matrix metal-organic framework membranes via spin-coating process for efficient hydrogen separation

Nuo Xu,Jiachen Li,Xinru Zhang,Qian Liu,Minman Tong,Liangliang Dong,Hong Meng,Lijun Liang

Two-dimensional (2D) metal-organic framework (MOF) materials with ultrathin layers, uniform micropores, and extraordinary physicochemical properties exhibit unique mass transport behaviours, enabling them as emerging building blocks for fabricating mixed matrix membranes (MMMs) for hydrogen purification. However, because of the low loading and disordered orientation of 2D MOF materials, high-performance transport paths are often blocked by multisegment polymer matrices, resulting in undesirable hydrogen separation performance. Herein, we report a spin-coating technique for fabricating highly oriented ZIF-7@polybenzimidazole (PBI) MMMs with an ultrahigh 80 wt% of ZIF-7 loading. Through the synergetic manipulation of the spin-coating speed, size, and dispersion of ZIF-7 plates, a high-density distribution of oriented and selective ZIF-7 nanochannels was constructed, enabling the preferential transport of hydrogen molecules. Compared with traditional MMMs with random orientations, the highly oriented ZIF-7@PBI MMM achieved a H 2 permeability of 4505 Barrer and H 2 /CO 2 selectivity of 18.7, surpassing the performance of existing membranes by 8 to 800 times. This study offers great potential for maximising the performance of oriented membranes and provides a viable pathway for developing high-efficiency membranes for various gas separation applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ENVIRONMENTAL MANAGEMENT · 2026 · IF 9.2

FeMn-layered double hydroxide-modified carbon cloth combined with ion exchange membrane enhanced the degradation of ionic organic pollutants in the capacitive desalination/peroxymonosulfate system

Jingke Song,Xiaoyu Wang,Kai Wang,Zhenlong Jiang,Xinyu Wang,Kai Jiang,Dapeng Wu

FeMn-layered double hydroxide (FeMn-LDH)-modified carbon cloth (CC) and ion exchange membranes were used to enhance adsorption of ionic organic pollutants (IOPs) by the hybrid capacitive deionization (HCDI) system. This system was then coupled with peroxymonosulfate (PMS) activation to efficiently degrade common IOPs, such as Acid Orange 7 (AO7). The FeMn-LDH-HCDI/PMS system achieves efficient removal of AO7 in saline wastewater by adding 1.0 mM PMS at a low voltage of 1.2 V, with a removal efficiency of approximately 94.9%. The system can effectively remove AO7 from saline water across a wide pH range (3-8) and is less affected by common coexisting anions. The presence of the cation exchange membrane enhances the system's electrosorption of AO7, while FeMn-LDH boosts PMS activation through the valence changes of metal elements. The degradation of AO7 is primarily due to the generation of • OH, SO 4 •− and 1 O 2 through PMS activation, while the toxicity of the intermediate products is reduced during the treatment process. Additionally, the system can achieve a removal efficiency of 83.1% for Cu(II)- ethylenediaminetetraacetic acid (EDTA) after 60 min of treatment, highlighting its potential for treating various IOPs.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2026 · IF 9.6

Bonding layer reinforcing the interface of binder-free Sb-based electrode for improved cycling stability of sodium ion batteries

Wensheng Ma,Zhonghua Zhang,Yi Zhang,Yan Wang

Compared to traditional electrodes, binder-free electrodes have attracted extensive attention due to their high energy density. However, the absence of binders results in weak connection between the active material and the current collector, which can cause active materials to detach from the collector, especially in alloy-type electrode such as Sb with severe volume change. Herein, we report an electrochemically inactive Ag 3 Ga film as a bonding layer between Sb film and stainless steel mesh (ssm). The bonding strength is further enhanced by annealing at 400 °C, during which Sb film alloyed with Ag 3 Ga to form GaSb film (GaSb@Ag 3 Ga-400). As for anode of sodium ion batteries (SIBs), the GaSb@Ag 3 Ga-400 electrode operated in 0.01–0.75 V (vs. Na + /Na) exhibits excellent cycling stability (245.9 mAh g −1 after 400 cycles at 1 A g −1 ) and satisfactory rate capability (205.3 mAh g −1 at 3 A g −1 ). The sodium storage kinetics of GaSb@Ag 3 Ga-400 electrode was further characterized by cyclic voltammetry at different scan rates and galvanostatic intermittent titration technique. More importantly, the alloying/dealloying storage mechanism of GaSb@Ag 3 Ga-400 electrode was revealed by in situ X-ray diffraction analysis. The present work presents the significant potential of Ag 3 Ga film as a robust bonding layer for binder-free electrode with long-term cycling stability and offers available insights for the development of other binder-free electrodes.

CAS / MDL: 7440-23-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION · 2026 · IF 7.9

Highly efficient Fe-based single-atom catalysts derived from S-doped metal-organic framework (MOF) for heterogeneous Fenton-like reactions

Dongsheng Zhang,Rui Yang,Ting Wu,Wangbo Wang,Yizhou Feng,Weihuang Zhu

Single-atom catalysts (SACs) have attracted considerable interest in heterogeneous Fenton-like reactions (HTFR). However, their efficiency and practical applicability require further improvement. To address this, an S-doping strategy was employed, using zeolitic imidazolate framework-8 (ZIF-8) as a precursor to fabricate Fe-based SACs (Fe-SNC) for peroxymonosulfate (PMS) activation. X-ray absorption fine structure (XAFS) analysis confirmed the coordination of atomically dispersed Fe to N and S atoms, forming a Fe–N 2 S 2 configuration. In a separate adsorption test, Fe-SNC achieved 93.1% removal of tetracycline (TC). Furthermore, TC could be removed within 40   min during PMS-based HTFR catalyzed by Fe-SNC, exhibiting significantly high performance compared to the pristine Fe-NC catalyst. Additionally, the activation energy for PMS activation was decreased to 2.87   kJ/mol with Fe-SNC, which is only 26.16% of that required for Fe-NC (10.97   kJ/mol). The superior performance of Fe-SNC is attributed to its enhanced adsorption capacity and high PMS activation ability. Density functional theory (DFT) calculations further revealed that S-doping significantly enhanced the adsorption energy between catalyst and PMS to -2.95   eV. It also promoted the elongation of O–O (1.477   Å) and S–O (1.873   Å) bonds, while facilitating charge transfer of 0.79 e. The galvanic oxidation process (GOP) also demonstrated that the electron transfer process played a key role during the PMS-based HTFR catalyzed by Fe-SNC. The quenching experiments and EPR tests further confirmed that the 1 O 2 and Fe(IV)=O were the primary reactive species. This work provides insightful perspectives for the rational design of highly efficient SACs for HTFR.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Carbon spheres produced from polystyrene-based resin via sulfur-induced dehydrogenation carbonization

Weiyang Xue,Wenshuo Jiang,Bin Gu,Kai Deng,Yukun Jiang,Wenhao Cui,Shengzhe Wang,Wenjing Sun,Chenglin Sun,Xiangdong Zhang

Millimeter-sized carbon spheres are pivotal in industrial catalysis and separation due to their superior mechanical strength and fluidity. Although spherical polystyrene resin is an ideal precursor for carbon spheres owing to its high carbon content and controllable morphology, converting thermoplastic polystyrene into high-quality carbon spheres remains a challenge due to the dominant C C bond scission that leads to framework collapse and low carbon yields. Herein, a facile two-step sulfur-induced dehydrogenation carbonization strategy (SDHC) was developed to transform spherical polystyrene resin into carbon spheres with sizes from nm to mm scale. The sulfur-induced dehydrogenation process fundamentally redirects the pyrolysis pathway from depolymerization toward crosslinking. Utilizing elemental sulfur as an oxidant, hydrogen in polystyrene was selectively removed at moderate temperatures (< 400 °C) into H 2 S. This process facilitated the framework crosslinking of polystyrene resin and effectively suppressed volatile loss during carbonization. Theoretical calculation elucidated that sulfur radicals kinetically favor dehydrogenation pathway ( E a  = 13.6 kJ/mol) rather than the β-scission of polymer chains ( E a  = 94.5 kJ/mol). Consequently, the SDHC strategy achieved a remarkable product yield (>90%), and produced millimeter-sized carbon spheres with exceptional strength (115 N) and low diameter shrinkage (14.1%), significantly outperforming conventional pre-oxidation or sulfonation methods. Furthermore, hectogram scale-up experiment was successfully carried out. The resulting carbon spheres showed outstanding performance as catalyst support for nitrobenzene hydrogenation.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2026 · IF 5.4

Conformational effects on the host-guest interaction between amino acids modified pyrene and γ-cyclodextrin

Jian Kong,Xinlei Zhang,Yiwen Yang,Siyu Ma,Jiantao Bi,Yuangang Li

The folding behavior of guest molecules plays a critical role in determining host-guest interaction patterns in supramolecular systems. This study presents a systematic investigation of how amino acid side chains control the folding conformations of pyrene-based guests and thereby direct their recognition by γ-cyclodextrin. Through comprehensive analysis, we demonstrate that extended conformations enable stable inclusion within the cyclodextrin cavity, as evidenced by the emergence of a characteristic excimer fluorescence band at 480 nm, while progressively folded structures lead to weakened interactions due to steric hindrance. The self-shielding effect in rigidly folded molecules, driven by intramolecular π-π stacking between the pyrene core and the aromatic side chain, completely suppresses host-guest complexation. This mechanistic insight is quantitatively supported by molecular dynamics simulations, which reveal that the spatial dimensions of the folded conformers exceed the capacity of the γ-cyclodextrin cavity. These findings establish molecular folding as a key design parameter for programming supramolecular recognition, providing new strategies for controlling molecular assembly through side chain engineering.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nano-Micro Letters · 2026 · IF 38.5

Electrolyte Engineering in Redox-Enhanced Electrochemical Capacitors with Zn Anodes: The Role of Colorimetric Indicators

Ming Chen,Qinglong Luo,Xiaolei Wang,Kaiyuan Shi

The increasing demand for high-performance energy devices has prompted the exploration of advanced electrolytic solutions for aqueous energy storage. Redox-enhanced Zn-ion capacitors (RZICs) overcome the limitations of conventional electrochemical capacitors by integrating redox-active molecules into the electrolyte, which enables higher energy density and expanded voltage windows. In this study, we developed organic dye-based colorimetric indicators for the fabrication of functional electrolytes in RZICs. The structural responsiveness of these dyes, driven by proton–electron transfer through electrochromic dynamics, allows real-time monitoring and optimization of the RZICs. The acid–base equilibrium of colorimetric indicators supports pH buffering, resulting in an extended lifespan of Zn||Zn cells up to 4,000 h. The conjugated aromatic structure of the indicators enhances their adsorption onto activated carbon, thereby minimizing the self-discharge in RZICs. Additionally, the phenol–quinone transformation increases the capacity of RZICs to 152.4 mAh g −1 within an optimized voltage window of 0.2–1.6 V, while promoting electrochemical kinetics and suppressing anode degradation. The results advance the design and customization of redox electrolytes with colorimetric properties for supercapacitive energy storage.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
HISTOLOGY AND HISTOPATHOLOGY · 2026 · IF 2.2

Application of the ultrasonic oscillation flotation method in paraffin section preparation

Min Zhang,Yue Chen,Lü Ren,Jinzhi Xia,Lu Tao,Jianguo Hu,Jing Li,Xiaofeng Zhang,Zhijun Geng,Yueyue Wang,Xue Song

Objective: To enhance the quality and efficiency of paraffin-embedded pathological section preparation, this study aims to investigate the potential benefits of utilizing the ultrasound oscillation flotation method (UOFM) for section spreading. Methods: Specimens of various tissue types were processed using both the conventional and UOFM for section spreading. The presence of wrinkles or damage during this process was assessed through HE staining, with the number of wrinkles being quantified. The optimal frequency and power density for section spreading were determined by evaluating the qualified rate of sections at various frequencies and power densities, and the average time required for section spreading was compared between the two methods. Results: The results showed that pathological sections of various tissue types rarely showed paraffin dissolution and section breaking after the UOFM. HE staining also revealed that the group exhibited significantly reduced wrinkling and a more intact tissue structure compared with the conventional method group ( p <0.05). Statistical analysis further indicated that the highest rate of section qualification was achieved when employing a frequency of 33 kHz with a power density of 60% or a frequency of 40 kHz with a power density of 75% ( p <0.05). Additionally, the mean duration of section spreading in the group utilizing the UOFM was significantly reduced ( p <0.05). Conclusions: The UOFM effectively maintains the structural integrity of paraffin pathological sections, significantly enhancing the quality of sections and optimizing section preparation efficiency.

CAS / MDL: 1330-20-7 64-17-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。