POLYMER DEGRADATION AND STABILITY
·
2026
·
IF 8.1
Fei Li,Lixin Liu,Lei Song,Yunlong Sun,Shixue Ren,Lu Li,Rui Wang
The closed-loop recycling of plastics is crucial for polymer sustainability. Bio-based PEF can be depolymerized via glycolysis, but catalysts often exhibit low efficiency. In this work, a titanium-based metal-organic framework (MOF), MIL-125, was synthesized with optimized metal-to-ligand ratios (MIL-125-5 with a Ti/PTA ratio of 1:5) to achieve a high specific surface area of 1719.6 m 2 /g and abundant Lewis acid sites. This catalyst demonstrated exceptional performance in PEF polymerization, yielding a polyester with a M n of 3.7 ×10 4 g/mol, a PDI of 1.9, and low metal residue (176.6 ppm Ti content), under mild conditions (210 o C for esterification and 230 o C for polycondensation). Comprehensive structural and catalytic characterization of MIL-125 was conducted through a combination of advanced techniques. XPS confirmed the existence of crystallographically distinct Ti 3+ /Ti 4+ active sites. The N 2 adsorption-desorption isotherms indicate the presence of microporous and mesoporous structures, with a pore volume of 0.65 cm 3 /g. while TGA revealed exceptional thermal stability exceeding 300 o C. Furthermore, NH 3 -TPD and EPR spectroscopy revealed abundant Lewis acid sites and oxygen vacancies, respectively. These structural features demonstrated a strong correlation with catalytic activity, as further validated through DFT calculations. Remarkably, the same MIL-125 catalyst facilitated closed-loop recycling by enabling depolymerization of PEF via glycolysis at 180 o C and atmospheric pressure, followed by repolymerization without catalyst separation or purification. This process produced recycled PEF (rPEF) with an Mn of 2.7×10 4 g/mol and properties comparable to virgin PEF, underscoring the catalyst's reusability and efficiency. This study establishes MIL-125 as a green, high-performance catalyst for sustainable polyester production and recycling.
✓ 已验证
DOI
高影响因子
RENEWABLE ENERGY
·
2026
·
IF 9.1
Yuanyuan Xia,Yishuai Fu,Wenliang Wang
Expanding the range of monomers prepared by lignin depolymerization is of great importance to achieving sustainable and high-value biorefineries. However, there is a trade-off between the fast conversion technology and the slow conversion pathway from lignin to high-value chemicals. Herein, we use microwave-assisted depolymerization technology with low energy consumption and fast reaction speed, and use different nitrogen sources to achieve target liquid products. Different pretreatment strategies modify the dielectric properties of lignin, boosting liquid product conversion efficiency and enhancing biochar application value. Microwave-assisted depolymerization of ammonium paratungstate-lignin mixtures yields substantial amounts of phenols and nitrogenous compounds. Multi-physic field coupled finite element simulations and kinetic analyses revealed that the dielectric disparity between ammonium paratungstate and lignin particles under microwave irradiation triggers a potent interfacial polarization effect. This effect substantially elevates the depolymerization temperature. Additionally, the incorporation of ammonium paratungstate notably decreases the reaction activation energy from 30.15 kJ mol −1 to 25.16 kJ mol −1 , thereby enhancing the depolymerization efficiency. This approach enables the one-step conversion of lignin to nitrogen-containing monomers (pyridine, quinoline, aniline) through reactions between lignin side chains/phenolic monomers and amines, offering a viable route for lignin valorization and guiding future production of high-value lignin-derived monomers.
✓ 已验证
产品关联
DOI
高影响因子
FOOD RESEARCH INTERNATIONAL
·
2026
·
IF 8.8
Ning Zhang,Lina Yang,Huaying Pan,Fuming Zhang,Shengnan Wang,Miao Bai,Guangchen Zhang,He Liu
Soybean products rich in high-quality proteins have a short shelf life owing to their high water activity characteristics. In this study, sustained-release antibacterial composite films of cinnamaldehyde microcapsules (CAMs) were constructed for the preservation of dry tofu using soy hull nanocellulose (SHNC), polyvinyl alcohol (PVA), and pullulan (PUL) as the composite matrix. CAMs with an encapsulation efficiency of 70.53% were prepared via complex coacervation using gelatin–Arabic gum as the wall material. Different contents of CAMs (0.5%, 1%, 2%, and 3% w /w) were added to the SHNC–film using the solution casting method. Fourier transform infrared spectroscopy and X-ray diffraction analysis confirmed that cinnamaldehyde was successfully embedded in the CAMs and crosslinked with the composite film matrix via hydrogen bonding to form a dense network structure. Scanning electron microscopy showed that the CAMs were well integrated into the composite film matrix without forming pores or cracks. Physical performance tests showed that after adding 2% ( w /w) CAMs, the mechanical strength of the composite film was significantly improved (the tensile strength increased from 13.79 ± 1.67 MPa to 26.94 ± 2.02 MPa; P < 0.05), as were its hydrophobic properties (the contact angle increased from 25.7° ± 1.6° to 68.3° ± 1.6°), thermal stability, and ultraviolet barrier properties. The CAMs composite film (CAMs-film) significantly inhibited the proliferation of Pseudomonas fragi by inhibiting energy metabolism, degrading cell components and metabolic intermediates, and disrupting secondary metabolism (inhibition rate of 96.03%, P < 0.05). The composite film with 2% CAMs could extend the shelf life of dried tofu to 20 days at 4 °C. As a new environmentally friendly packaging material, the CAMs-film developed in this study can effectively extend the shelf life of perishable foods, providing a solution for the development of sustainable food packaging.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Food Chemistry-X
·
2026
·
IF 9.2
Wanjun Ma,Honger Yao,Li Zhao,Haipeng Lv
This study investigated the impact of “flowering” process ( Aspergillus cristatus -mediated fermentation) on the quality of Shaanxi Fu brick tea. Metabolic profiles of twenty samples, collected before (BF) and after (AF) fermentation were analysed. Moreover, in vitro assessments of their antioxidant and hypolipidaemic activities were also evaluated. Results indicated a significant decrease ( p < 0.05) in tea polyphenols (13.09%) and free amino acids (38.24%), while caffeine and flavonoids showed no significant changes after flowering process. Integrated gas chromatography–mass spectrometry (GC–MS) and liquid chromatography-mass spectrometry (LC-MS) found that 15 volatiles ( e.g. diallyl sulfide) and 47 non-volatile compounds ( e.g. fuzhuanin A) were significantly increased. Correlation analysis revealed that antioxidant capacity was closely associated with echinulin and 6-gingerol, whilst hypolipidaemic effect was correlated with fuzhuanin A, teadenol A, and betaine ( p < 0.05). These findings underscore the pivotal role of flowering process in shaping the functional metabolite profile and bioactivity of Fu brick tea.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF SEPARATION SCIENCE
·
2026
·Vol. 49
·期 2
·e70366
·
IF 3.6
Hangming Li,Tianqi Ma,Guoqing Jin,Shenghong Guan,Jiaye Li,Ping Huang,Xueli Hu,Shuxin Chen,Zhao Wang,Jingkui Tian,Shouxin Li,Xiaoyong Zhang
Shaoyao Ruangan Decoction (SYRGD), a classic traditional Chinese medicine (TCM) preparation composed of over a dozen herbs, is widely used in the clinical treatment of liver cancer, hepatitis, and liver cirrhosis. In this study, we elucidated the chemical basis of SYRGD and, for the first time, its in vivo metabolic pathways and dynamic gastrointestinal changes by combining ultra-high-performance liquid chromatography-tandem mass spectrometry (UHPLC-Q-Orbitrap-MS/MS) with the Simulator of the Human Intestinal Microbial Ecosystem (SHIME) model. Results revealed the identification of 101 constituents in SYRGD, primarily including flavonoids, terpenoids, organic acids, and alkaloids. Within the SHIME digestive fluids, 69 prototype components and 67 metabolites were identified, with the metabolic pathways primarily involving hydroxylation, oxidation, sulfation, and glucuronidation. Dynamic analysis showed that most prototype components were gradually absorbed or transformed, exhibiting a decreasing concentration gradient from the stomach to the colon. In contrast, many metabolites showed significant enrichment in the stomach and small intestine prior to their absorption or further transformation, indicating that metabolic reactions occurred throughout the entire digestive process. This study provides a comprehensive reference for the clinical application and further development of SYRGD. The systematic methodology is rapid, reproducible, overcomes the limitations of conventional animal or clinical trials, and establishes a precise research strategy for investigating the metabolism of other complex herbal medicines.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF FOOD SCIENCE
·
2026
·Vol. 91
·期 2
·e70937
·
IF 4.1
Minghui Xu,Yukang Gu,Fei Wang,Caixia Zhu,Quan Xu,Juan Kan,Man Zhang,Lixia Xiao,Xiaohua Qi,Liangjun Li,Shuping Zhao,Chunlu Qian
This study investigated the effects of three thermal processing methods (microwave, MW; sous-vide, SV; and air frying, AF) on the texture, color, volatile, and nonvolatile components of three lotus root varieties ( Zaohua , SW , and E9:11 ). The results indicated that SV effectively preserved texture, color, and umami compounds, particularly in the SW variety. Both MW and SV treatments showed similarities in the composition and content of volatile compounds. AF, by increasing hardness, chewiness, and the composition and content of flavor compounds, significantly improved the edible quality, making it the most effective method for enhancing flavor compounds. The high stability of pyrazines in the E9:11 variety and the stable high content of ketones in the Zaohua variety highlight their aromatic potential. The SW variety demonstrated strong resistance to MW treatment, which helped preserve alcohol-based flavor compounds, while also exhibiting distinctive taste characteristics under SV treatment. Based on the analysis of 134 identified volatile compounds, 10 key differential aroma compounds, including 2,4-nonadienal, (E, E)-2,4-nonadienal, and nonanal, were identified using odor activity value (OAV) and variable importance in projection (VIP) analyses. The results guide the development of quality lotus root products and the selection of apt processing methods.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF FOOD SCIENCE
·
2026
·Vol. 91
·期 2
·e70913
·
IF 4.1
Zhen Li,Hongyu Cao,Yifei Wu,Hongbo Li,Guilian Sun,Kewen Li,Shuwen Zhang,Hongjuan Li,Jinghua Yu
This study focuses on the stability of whey protein isolate–dextran (WPI–D) complexes, exploring how their modification modes (covalent grafting/non-covalent mixing) and drying processes (spray-drying [SD]/freeze-drying [FD]) regulate structural properties and stability. Covalent WPI–D grafts (WPI-D-G) exhibit a higher degree of glycosylation, with significant fluorescence quenching and red shift. Fourier transform infrared (FTIR) spectral analysis reveals reduced absorbance of amide bands, collectively forming rigid cross-linked structures. Compared to non-covalent WPI–D mixtures (WPI–D-M), these structures exhibit superior emulsifying activity index (EAI), emulsion stability index (ESI), as well as stronger tolerance to environmental stresses (thermal stability: FD WPI–D-G (WPI–D-GF) maintain a particle size of 0.447 µm at 80°C, whereas SD WPI–D-G (WPI–D-GS) tend to aggregate; salt tolerance: stable at NaCl ≤ 20 mg/mL; pH stability: robust across pH 2–7). WPI–D-GF retain intact cross-linked structures, exhibiting enhanced emulsifying performance and colloidal stability (higher absolute zeta potential), whereas WPI–D-GS, despite forming smaller uniform spherical particles, undergo partial structural degradation. Regarding comparative stability under different conditions: WPI–D-GF outperforms WPI–D-GS in thermal stability, whereas covalent grafts from both drying methods demonstrate comparable salt and pH tolerance. These findings elucidate the structure–stability relationship of WPI–D complexes, thereby providing a theoretical foundation for regulating their stability through process optimization.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Mengjia Shi,Zirui Jia,Shuang Xu,Zhenguo Gao,Guanglei Wu
Constructing heterogeneous structures to precisely regulate the interface characteristics and loss mechanisms of materials is the key to performance improvement. This study proposes a strategy of constructing the NiS 2 -CdS P-N heterojunction with Porous carbon nanofibers (PCNFs) as the supporting skeleton, and deeply investigates the influence of the interface regulation mechanism of the P-N heterojunction on the absorption performance. The study clarified the structural reconstruction information such as bond parameter distortion, atomic occupation deviation, and lattice disorder caused by the Built-in electric field (BIEF) of the P-N heterojunction through X-Ray Diffraction (XRD) refinement. With the help of Density functional theory (DFT) calculation, the performance regulation mechanism of the heterojunction was revealed at the atomic/electronic scale. A carrier migration model between NiS 2 and CdS was constructed, and the absorption mechanism was analyzed. By utilizing the BIEF and space charge region formed by NiS 2 and CdS, the equivalent impedance is regulated. Ultimately, the cooperative optimization of material impedance matching and energy dissipation is achieved, providing new ideas and development of high-performance electromagnetic wave (EMW) absorbing materials. This research provides theoretical support for the subsequent shift of absorbing materials from empirical synthesis to precise design.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Science
·
2026
·
IF 14.1
Songxuan Liu,Ping Zhang,Panpan Li,Yao Ji,Zhiguo Xia,Weichao Wang,Qinyuan Zhang
The development of flexible and wearable radiation detection technology is urgently needed for medical imaging, non-destructive testing, and personal dosimetry. Although bulk single-crystal and ceramic scintillators suffer from intrinsic brittleness and scalability issues, glass scintillators typically show limited light yield. To overcome these challenges, we have developed a Tb 3+ -doped oxyfluoride glass-ceramic scintillator via an integrated approach combining phase-diagram guidance and molecular dynamics simulations. Based on the controlled precipitation of Ba 2 GdF 7 nanocrystals, the as-prepared glass-ceramic scintillator achieves a light yield of 41 800 photons/MeV (418% of BGO). It also achieves a high X-ray imaging spatial resolution of 25.3 lp/mm with large-area scintillating plates and demonstrates exceptional thermal quenching resistance. Leveraging the superior processability of the glass matrix, we further fabricated a flexible scintillation fiber for remote, highly sensitive radiation dosimetry. The fiber sensor exhibits a sensitivity of 224 nGy/s, stability over 240 on-off irradiation cycles, and excellent linearity (R 2 = 0.9999). This work not only presents a robust glass-ceramic scintillator material design strategy but also demonstrates its potential in next-generation distributed radiation detection systems using large-area scintillating plates and flexible glass fibers.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Optical Materials
·
2026
·
IF 7.2
Shurui Lv,Yuang Zhang,Shufen Zhang,Bingtao Tang
Azobenzenes are among the most widely used molecular photoswitches owing to their rapid response, excellent fatigue resistance, facile synthesis, and scalability. However, their isomerization typically requires ultraviolet (UV) light, which has limited penetration and may cause material degradation. Achieving high bidirectional photoconversion, visible-light responsiveness, and suitable Z -isomer thermal half-lives remains both crucial and challenging. Here, we report a series of pyrazole-based azo photoswitches responsive to visible-light. These molecules exhibit efficient cis -to- trans photoisomerization (>90% upon 405 nm irradiation) and nearly quantitative trans -to- cis conversion (>98% upon 532 nm irradiation). Light-responsive systems constructed from these azo photoswitches display a well-balanced performance profile. Owing to their practicality and robust switching behavior, these azopyrazole photoswitches hold strong potential for diverse light-responsive applications.
✓ 已验证
产品关联
DOI
高影响因子
iScience
·
2026
·
IF 4.5
Qixian xie,Bowen Guo,Yichen Zhang,Tianze Yang,Chenfang Cui,Zhengliang Liu,Honglin Yao,Baili Li,Wurong Ren
The integration of the KHCO 3 fed bipolar membrane (BPM) electrolyzer with KOH based CO 2 capture enables directly in situ conversion of captured CO 2 into valuable carbonaceous products, eliminating costly CO 2 recovery and compression steps. Even this integrated BPM system assembly holds promise, the critical lack of CO 2 adsorption intermediate species tracking necessitates the development of a monitoring platform. This work pioneers a novel dual-modal strategy employing simultaneous indicator-based sensing with in situ UV-Vis spectroscopy, achieving real time visualization of triphasic dynamics during integrated CO 2 capture-regeneration-conversion. Within this synergistic process involving Ar-saturated KHCO 3 decomposition, and electrochemical reduction, an etched indium (In) catalyst achieves 50% formate Faradaic efficiency (FE) at -1.1 V vs. RHE. The synergistic application of these complementary in situ diagnostics unlocks fundamental mechanistic insights into integrated CO 2 capture and conversion systems, establishing them as critical enablers for advancing efficient and scalable electrochemical CO 2 valorization.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Science Advances
·
2026
·Vol. 12
·期 8
·
IF 13.9
Tianchen Li,Yuchen Yue,Hui Li,Ning Guo,Fengmian Li,Hanfei Gao,Lei Jiang,Yuchen Wu
AgInGaS (AIGS) quantum dots (QDs) are promising for displays due to their narrow full width at half maximum (FWHM) and tunable emission. However, nonuniform silver vacancy ( V Ag ) distribution causes emission broadening and hinders device performance improvement. Here, we present a multistep temperature control strategy that precisely regulates reaction temperature to control nucleation, cation exchange, and defect reconstruction, thereby enabling uniform V Ag distribution in AIGS QDs. Simultaneously, we construct a dual-layer shell structure (AgGaS 2 /GaS x ), which efficiently passivates surface defects. The synthesized red, green, and blue AIGS QDs achieve photoluminescence quantum yields (92.6, 98.5, and 53.3%) and narrow FWHMs (32, 29, and 21 nm). On the basis of these materials, we fabricated red, green, and blue QD light-emitting diodes that demonstrate external quantum efficiencies of 13.2, 8.0, and 2.9%. Moreover, the interfacial confinement self-assembly strategy enables the fabrication of full-color QD pixel arrays with resolutions up to 2032 pixels per inch, further highlighting the potential of AIGS QDs for near-eye displays.
✓ 已验证
产品关联
DOI
PubMed
高影响因子