FUEL PROCESSING TECHNOLOGY
·
2019
·
IF 4.507
Haonan Qu,Bingyi Liu,Guohua Gao,Yiming Ma,Yanmei Zhou,Hua Zhou,Li Li,Yonghong Li,Shengjian Liu
Levulinic acid (LA) is a versatile key building block in the conversion of carbohydrates and it is an important basic chemical with various potential uses. MIL-100(Fe) loading with insoluble lysine functionalized phosphotungstic acid (Lys-PM 2 ) as heterogeneous catalysts have been synthesized for the conversion of glucose to LA in water. The optimized yield of LA is obtained by using Lys-PM 2 to catalyze glucose conversion is comparable to the majority of effective catalysts. The highest yield of LA (57.9%) is obtained at 150 °C for 9 h with 100 mg glucose and 25 mg Lys-PM 2 , since the Brønsted acidity and Lewis acidity of Lys-PM 2 . And the catalyst is able to recycle at least four times. It demonstrates the potential of Lys-PM 2 for the conversion of biomass.
研究领域:
催化化学
·
绿色化学
·
生物质能源
·
有机转化
·
材料化学
·
可持续化学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2014
·Vol. 4
·期 52
·27259-27266
·
IF 3.708
Libin Yang,Feng Xin,Junzhong Lin,Zhuang Zhuang,Rui Sun
In this study, a hydrothermal synthesis was developed to prepare a thin titanium silicalite-1 catalyst layer in the internal channels of the honeycomb cordierite support, which was used in a continuous heterogeneous reaction. The as-prepared thin TS-1 catalyst layer was characterized by SEM, XRD, UV-vis and ATR-FTIR methods. Multiple hydrothermal syntheses were used for controlling the crystalline growth to optimize catalytic activity and lifetime. Moreover, a monolithic TS-1/cordierite reactor with external looping was utilized to investigate the characteristics of the continuous heterogeneous ammoximation reaction without the organic solvent tert-butanol (TBA). The reaction results showed that the conversion of cyclohexanone and selectivity of oxime approached more than 0.96 and 0.98, respectively. When compared with the reaction using TBA as the reaction solvent, the activity of the monolithic TS-1/cordierite showed no differences except for a longer lifetime.
研究领域:
化学工程
·
催化化学
·
材料科学
·
工业化学
·
绿色化学
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL RESEARCH
·
2021
·
IF 6.498
Xueqian Yan,Jin Qian,Xiangjun Pei,Lihong Zhou,Rui Ma,Mingkuan Zhang,Yufei Du,Linqin Bai
In this study, a magnetic NiFe 2 O 4 /MWCNTs/BiOI composite were fabricated and applied for enhanced and sustainable photocatalytic degradation of doxycycline (DOX) under UV light irradiation. The as-synthesized material was characterized by a series of techniques and its photocatalytic property was assessed via a couple of batch tests. With the pH at 3.0 and NiFe 2 O 4 /MWCNTs/BiOI loading of 1.5 g L −1 , the DOX degradation (at 45 mg L −1 ) efficiency could achieve 92.18% with the reaction rate constant k of 0.0072 min −1 . The high mineralization of DOX suggests the strong oxidation of both the parent pollutant and the intermediary products in the ternary catalyst system. DRS spectra indicated that compared with BiOI , the introduction of NiFe 2 O 4 and MWCNTs reduces the band gap energy of the NiFe 2 O 4 /MWCNTs/BiOI. The quenching test illustrates that h + , OH and O 2 − all functioned in the developed photocatalytic system, where O 2 − and h + play the dominant roles in DOX degradation. The more efficient electron-h + separation and more oxidizing species induced by UV light resulted in the significant improvement of DOX abatement in the developed coupling system compared with that on either BiOI or NiFe 2 O 4 /MWCNTs. The magnetic property of NiFe 2 O 4 /MWCNTs/BiOI enables its easy separation of the solid catalyst from the reaction solution and the sustainable application in the photocatalysis . Based on the intermediates of DOX decomposition identified by UPLC-MS, the possible degradation routes were proposed accordingly.
研究领域:
环境化学
·
材料科学
·
光催化
·
水污染治理
·
纳米复合材料
·
药物降解
✓ 已验证
DOI
高影响因子
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY
·
2013
·Vol. 51
·期 7
·1559-1564
·
IF 3.543
Xiao-Hui Liu,Yun-Hai Yu,Di Jia,Bo-Wen Cheng,Fei-Jun Zhang,Hui-Na Li,Peng Chen,Shan Xie
Single electron transfer living radical polymerization of methyl methacrylate catalyzed by the in situ prepared Cu(0) at ambient temperature was first examined using various metallic powders, including Zn(0), Ni(0), Mg(0), and Fe(0). Importantly, the polymerization initiated with Ni(0)/EBiB/CuBr 2 /PMDETA system exhibited optimal living/controlled nature and generated polymers with polydispersity index as low as 1.04 for 75.27% conversion and controlled molecular weights close to theoretical ones. A wide of range of Cu(II) salts were also investigated as catalyst sources instead of CuBr 2 . The recycling of Ni(0) was very convenient due to its magnetic property, which enables its extensive application. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013
研究领域:
高分子化学
·
材料科学
·
催化化学
·
有机合成
·
功能材料
✓ 已验证
DOI
高影响因子
Science China-Materials
·
2023
·Vol. 66
·期 5
·1810-1819
·
IF 8.1
Xiao Hongbin,Qian Qingkai,Zang Zhigang
Recently, all-inorganic cesium lead halide (CsPbX 3 (X = Cl, Br, and I) perovskite nanocrystals (NCs) have been extensively investigated for photocatalytic carbon dioxide (CO 2 ) reduction reaction (CO 2 RR). However, because the pristine CsPbX 3 NCs suffer from severe radiative recombination, it is imperative to elaborately design heterostructures to separate electron-hole pairs for achieving efficient CO 2 RR. Herein, palladium (Pd) nanoparticles (NPs) are anchored on CsPbBr 3 NCs by a photo-assisted approach for the first time. The as-prepared CsPbBr 3 @Pd NCs not only build Schottky junctions at the CsPbBr 3 /Pd interfaces that promote the carrier separation and suppress the radiative recombination, but also exhibit lower energy barriers for photocatalytic CO 2 RR than pristine CsPbBr 3 NCs according to the density functional theory calculations. The electron consumption rate reaches a striking peak of 46.2 µmol g −1 h −1 by using CsPbBr 3 @Pd NCs as photocatalysts for CO 2 RR, which is 4.8-fold of the counterpart of pristine CsPbBr 3 NCs. This work not only presents a photo-assisted strategy for anchoring Pd NPs on CsPbBr 3 NCs, but also demonstrates the great potential of using CsPbBr 3 @Pd NCs for photocatalytic CO 2 RR.
研究领域:
材料化学
·
光催化
·
纳米材料
·
环境化学
·
能源化学
·
半导体物理
·
催化化学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 35
·29638-29645
·
IF 3.289
Xin Ge,Xinzhi Chen,Chao Qian,Shaodong Zhou
Ullmann type C–N coupling reaction catalyzed by copper(I) with D-glucosamine derivatives as promoters was studied by means of combined experimental/theoretical investigation. The catalytic role of D-glucosamine was addressed. In contrast with previous speculations, the amino group may not count in the catalytic cycle in which the oxidative addition/reductive elimination mechanism works. Experimental results are in good agreement with theoretical findings. Extensive work indicates the wide applicability of the C–N coupling strategy exploited in this work.
研究领域:
有机化学
·
催化化学
·
药物化学
·
计算化学
·
合成方法学
·
生物正交化学
·
金属有机化学
✓ 已验证
DOI
高影响因子
MACROMOLECULAR CHEMISTRY AND PHYSICS
·
2011
·Vol. 212
·期 21
·2378-2388
·
IF 2.437
Bin Yuan,Xiaohui He,Yiwang Chen,Kaiti Wang
Covalently immobilized silica-supported acetylacetonate dichloride palladium(II) precatalyst is prepared by the reaction of silica particles grafted acetylacetonate ligand further exchange with [Et 4 N] 2 PdCl 4 . The silica-supported catalyst is used in slurry polymerizations of norbornene (NB) to afford a highly productive NB addition polymerization system in combination with B(C 6 F 5 ) 3 cocatalyst. It exhibits productivity of 84 kg of PNB (mol Pd) −1 h −1 at the initial activity, and the catalyst deactivation kinetics in the early stage of polymerization are fitted well by the first-order deactivation kinetics. The obtained vinyl-type polynorbornene is confirmed to be nanosilica hybrid PNB nanocomposite by SEM, TEM with an energy dispersive spectrometer, TGA, and XRD.
研究领域:
高分子化学
·
纳米复合材料
·
催化化学
·
有机金属化学
·
材料科学
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2022
·
IF 6.633
Hongjun Zang,Yimo Feng,Jing Lou,Kai Wang,Changchun Wu,Zhipeng Liu,Xi Zhu
Ionic liquids have shown good catalytic performance and been widely used in the biomass conversion process due to their unique properties, including environmental friendship, low toxicity, and simple preparation. In this work, a series of novel piperidinium-based ionic liquids were synthesized under mild conditions via a simple protonation reaction or nucleophilic substitution reaction. Among them, 4,4′-(propane-1,3-diyl)bis(1-(carboxymethyl)piperidin-1-ium) chloride ([PDCMPi]Cl) displayed the best catalytic performance. The highest yield (42.81 %) of 3A5AF from NAG was obtained after reacting in N-methyl-pyrrolidone (NMP) in the presence of piperidinium-based ionic liquids at 180 °C for 20 min under normal atmospheric conditions. Additionally, ionic liquid [PDCMPi]Cl showed good catalytic activity in six repeated catalytic runs. Meanwhile, a possible reaction pathway was also proposed on the basis of the results of NMR spectra.
研究领域:
催化化学
·
绿色化学
·
生物质能源
·
有机合成
·
离子液体化学
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2018
·Vol. 43
·期 45
·20712-20720
·
IF 4.229
Biyao Jin,Yiqi Li,Lianhua Zhao
Bimetallic PdV/C nanoparticles have been synthesized by phase-transfer method for catalyzing the oxygen reduction reaction (ORR) in alkaline electrolytes . PdV/C nanoparticles with different V contents are spherical with a mean diameter of 3–4 nm, and the addition of V expands the lattice parameter of Pd as shown by XRD . XPS analysis indicated the binding energy of Pd 0 3d peak increased by ca. 1 eV. Density functional theory (DFT) calculations results shows d-band center of Pd down-shift after V-doping. Based on the electrocatalytic results, introducing V can improve the catalytic activity for ORR, methanol crossover tolerance and stability. Especially, Pd 4 V/C shows higher initial potential (E onset = 1.027 V), excellent methanol crossover tolerance (98.03% retained) and long-term stability (81.30% retained), which are comparable with Pt/C JM . This work provides a new method of synthesizing PdV/C nanoparticles , which have the potential to be used as the cathode electrocatalysts for fuel cells.
研究领域:
材料科学
·
电化学
·
纳米催化
·
能源材料
·
燃料电池
·
物理化学
·
表面科学
✓ 已验证
DOI
高影响因子
RUSSIAN JOURNAL OF GENERAL CHEMISTRY
·
2021
·Vol. 91
·期 4
·726-731
·
IF 0.868
Xu Y.,Hu Y.,Bao Q.,Zhang J.,Liu B.,Zhang Z.,Zhang Q.,Zhang H.
Copper phyllosilicate has been synthesized from a solution of sodium silicate and copper nitrate by co-precipitation under acidic conditions followed by reduction under H 2 flow for using it as the Cu/SiO 2 catalyst. The catalyst has been characterized by XRD, XPS, FTIR and Raman spectra, EDS, BET, and TEM. It is confirmed that only copper phyllosilicate and SiO 2 exist in the catalyst precursor, and there has been no CuO. Physical and chemical properties of Cu/SiO 2 catalyst have been evaluated. The Cu/SiO 2 catalyst has not only a large specific surface area and abundant mesopores but also the advantages of high dispersion of copper nanoparticles and the combination of Cu 0 and Cu + . The catalyst demonstrates high activity and selectivity in the reaction of 2-butanol dehydrogenation to methyl ethyl ketone.
研究领域:
催化化学
·
材料科学
·
物理化学
·
纳米材料
·
有机合成
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2014
·
IF 6.007
Xu Yan,Xiyou Wang,Wei Gu,MiaoMiao Wu,Yan Yan,Bo Hu,Guangbo Che,Donglai Han,Jinghai Yang,Weiqiang Fan,Weidong Shi
Single-crystalline AgIn(MoO 4 ) 2 nanosheets have been successfully fabricated by facile hydrothermal method without any surfactants. Subsequently, Ag/AgBr-grafted AgIn(MoO 4 ) 2 nanosheets were synthesized by the in situ photoreduction of AgBr/AgIn(MoO 4 ) 2 composites prepared by a deposition–precipitation method. Under visible light irradiation. The Ag/AgBr/AgIn(MoO 4 ) 2 composites exhibit a strong absorbance in the visible region because of the surface plasmon resonance absorption of Ag nanocrystals. Compared with bare AgIn(MoO 4 ) 2 nanosheets, Ag/AgBr nanoparticles and Ag/AgIn(MoO 4 ) 2 composites, a dramatic enhancement in the degradation rate of tetracycline (TC) is observed over the Ag/AgBr/AgIn(MoO 4 ) 2 composites. The immense enhancement of the photocatalytic activity is attributed to the extended absorption in the visible-light region, effective charge separation, and synergistic enhancement induced by surface plasmon resonance (SPR) in the heterostructured Ag/AgBr/AgIn(MoO 4 ) 2 . This study provides new insight into the fabrication of highly efficient and stable ternary metal molybdate based plasmonic photocatalysts and facilitates their practical application to solve environmental issues. The mechanism for the photodegradation of TC over Ag/AgBr/AgIn(MoO 4 ) 2 is discussed in detail.
研究领域:
材料科学
·
环境化学
·
光催化
·
纳米材料
·
无机化学
·
物理化学
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2022
·
IF 9.794
Xiao Yang,Minjian Ma,Chunming Xu,Rongzheng Ren,Jinshuo Qiao,Wang Sun,Kening Sun,Zhenhua Wang
Hybrid direct carbon fuel cells (HDCFCs) present its inherent and unparalleled advantages in converting chemical energy from organic waste, biomass, and coal directly into clean energy with high efficiency. However, the progress of HDCFC technology continues to be hampered by the sluggish anode reaction kinetics. Herein, an effective design strategy for HDCFC anode is proposed, a Cu-modified Sr 2 Fe 1.3 Cu 0.2 Mo 0.5 O 6-δ (SFCM) perovskite oxide is developed to meet the requirements of intermediate-temperature HDCFC anode. The Cu-doping SFCM anode demonstrates excellent redox structural stability and catalytic activity. In addition, the electrolyte-supported single cell with Cu-doping SFCM anode has improved the peak power density from 285.5 mW cm −2 to 489.3 mW cm −2 at 800 °C with activated carbon as the fuel. The significantly enhanced anode catalytic activity is primarily due to the improved interfacial activity and chemical adsorption of CO. Therefore, the present work shows an effective strategy for designing and developing novel high-performance HDCFCs anode materials .
研究领域:
能源材料
·
电化学
·
燃料电池
·
功能材料
·
催化化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）