ELECTROCHIMICA ACTA
·
2017
·
IF 4.798
Chang Chen,Kwok-ho Lam,Bao-jun Liu,Xian-hua Hou,Yu-ping Wu
Chemically integrated hybrid quantum dots ZnCo 2 O 4 /reduced graphene oxide (QDs ZCO/rGO) sheets nanocomposites are synthesized through polyol processes. rGO sheets grow and interweave to form basic skeletons. Ultrafine ZCO particles with a size of around 3.66 nm grow and embed on both sides of the rGO sheets, and the rGO sheets restrain the reunion of ZCO nanoparticles . The existence of rGO sheets and ZCO nanoparticles can engender the mutual synergistic effects so that hybrid QDs ZCO/rGO electrodes exhibit the excellent electrochemical properties . Owing to this special nanoparticles-on-sheets structure, the hybrid QDs ZCO/rGO electrodes exhibit an excellent initial discharge capacity for rechargeable lithium-ion batteries (1325.9 mAh g −1 at the current density of 200 mA g −1 ), high rate stability (532.3/566.1 mAh g −1 at 4000 mA g −1 ) and outstanding electrochemical cyclic stability (657.6/668.2 mAh g −1 at 2000 mA g −1 after 2000 cycles with a capacity retention of 68.6%). For full-cells, high initial reversible discharging capacity (646 mAh g −1 at 200 mA g −1 ) and good cyclic stability (514 mAh g −1 at 200 mA g −1 after 100 cycles) are obtained. The superior performance of the as-prepared electrodes is ascribed to the advantage of nano-sized particles. With the successful synthesis of hybrid QDs ZCO/rGO nanocomposites, the facile synthetic route and unique growth of nanostructuring method can be extended to high electrochemical performance electrodes for commercial lithium-ion batteries.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
·
先进电池技术
✓ 已验证
DOI
高影响因子
Journal of Materiomics
·
2022
·Vol. 9
·期 3
·568-576
·
IF 8.589
Qiujun Wang,Weiqi Zhu,Ya Su,Di Zhang,Zhaojin Li,Huan Wang,Huilan Sun,Bo Wang,Dan Zhou,Li-Zhen Fan
Lithium metal batteries based on solid electrolytes are considered as promising candidates with high energy density and safety. However, the weak solid-solid contact between electrolyte and electrode can easily lead to interface instability and lithium ions discontinuous migration, which seriously reduces the electrochemical performance of the battery. Herein, we construct a soft gel interfacial layer to improve the stability of the solid-solid interface between electrolyte and electrode by means of polyester-based monomers and imidazole-based ionic liquids. Based on this, garnet-type Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) particles as inorganic ceramic filler were introduced in the layer to obtain composite electrolytes with high ionic conductivity (up to 1.1 × 10 −3 S/cm at 25 °C). As a result, the assembled lithium symmetric battery of Li|THCE-15%LLZTO|Li suggests excellent cycling stability with 700 h at 0.1 mA/cm 2 at 50 °C, and the lithium metal batteries of LFP|THCE-15%LLZTO|Li delivers high initial discharge capacity of 128.2 mA ·h/g with capacity retain of 75.48% after 150 cycles at 2 C. This work paves a new route to build safe and stable lithium metal batteries with synergistic introduction of composite electrolytes between electrolyte and electrode using soft gel interfacial layer and inorganic filler.
研究领域:
电化学
·
材料科学
·
能源存储
·
固体离子学
·
界面工程
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 128
·105747-105752
·
IF 3.84
Yuanyuan Zheng,Xiaoming Zhang,Yi Yao,Xiaohong Chen,Qihua Yang
Ultra-small Au nanoparticles (<2 nm) supported on hollow silica nanospheres were successfully fabricated with the aid of chemical modification (–SH groups) or through simple immersion method, leading to supported catalysts Au/SH-HNS and Au/HNS. The resulting solid catalysts showed good thermal stability and the small particle sizes could be remained even at high temperature of 350 °C. Such catalysts were catalytically active in the oxidation of styrene using O2 as oxidant under 1 atm pressure. The catalytic results showed that the activity strongly depends on the Au loading amount, and the loading of 4–5 wt% led to the highest activity. Significant rate enhancement was observed with gold nanoparticles supported on pure silica in comparison with thiol modified silica nanospheres, suggesting the negative effects of thiol groups. The solid catalyst could be reused at least 8 reaction cycles without significant decrease in activity and selectivity. This study not only supplies an active, recoverable catalyst for the green transformation of styrene, but also demonstrates that the hollow silica nanosphere material has a superior ability in stabilizing metal nanoparticles against growth.
研究领域:
纳米催化
·
材料化学
·
绿色化学
·
有机氧化反应
·
多相催化
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Jianling Huang,ChengWei Liao,Hui Wang,YuJun Zhao,Liuzhang Ouyang,Jiangwen Liu,Min Zhu
Mg-based alloy anodes suffer from severe corrosion in conventional electrolytes (KOH solution) and this substantially obstructs the cycle life, which is a great challenge for using them in the Ni-MH battery. Herein, a high concentration tetramethylammonium hydroxide (TMAH) aqueous electrolyte with a special hydrate structure is explored and enables excellent cycle stability and high capacity for Mg-based alloy anodes. In this electrolyte, the Mg 0.4 Ti 0.1 Ni 0.5 alloy anode delivers a maximum discharge capacity of 466 mAh g −1 , and maintains 210 mAh g −1 after 100 cycles owing to the reduced corrosion rate , which are much better than that in 6 M KOH electrolyte, being 425 mAh g −1 and 69 mAh g −1 , respectively. Furthermore, by in-situ forming Cu coating on the Mg 0.4 Ti 0.1 Ni 0.5 electrode surface during charging process with the adding 0.01 M of Cu(OH) 2 in TMAH electrolyte, the corrosion of the electrode is further suppressed and the reversible capacity can reach 313 mAh g −1 after 100 cycles. The high conducting Cu coating can also increase the rate capability of the electrode by promoting the charge transfer. Thus, using TMAH electrolytes provides a new approach to promote the electrochemical performances of Ni-MH batteries with Mg-based alloy anodes.
研究领域:
材料科学
·
电化学
·
能源存储
·
金属腐蚀与防护
·
功能材料
·
电池技术
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2022
·
IF 9.794
Wei Feng,Huirong Liu,Mingliang Zhao,Jianling Li,Feiyu Kang
The poly(ethylene oxide) based composite solid electrolyte(PEO-CSE) is an effective solution for developing high-performance solid-state lithium battery . However, the poly(ethlene oxide)(PEO) based solid-state lithium battery using 4.0 V cathode suffers from severe interfacial instability problems. In this work, we add additive lithium difluorophosphate(LiPO 2 F 2 ) into the PEO-CSE to form a stable and low resistance interphase at the cathode/electrolyte interface during charge/discharge process. The electrochemical stability window of PEO-CSE increases to ∼5.0 V. Besides, the electrochemical performance of PEO based solid-state lithium battery with LiCoO 2 as cathode is excellent. The discharge capacity of LiCoO 2 /Li cell with LiPO 2 F 2 reaches 108.5 mAh g −1 at 1.0C. In contrast, the discharge capacity that without LiPO 2 F 2 is only 60.0 mAh g −1 . Meanwhile, the PEO-CSE with LiPO 2 F 2 cell delivers stable cycle performance at 4.2 V. The capacity retention maintains 88.5% compared with 16.1%(without LiPO 2 F 2 ) after 100 cycles. Furthermore, it's still maintains 83.3% after 150 cycles. In addition, the cathode/electrolyte interface is analyzed by transmission electron microscope(TEM) and X-ray photoelectron spectroscopy(XPS). Galvanostatic intermittent titration test(GITT) is used to analyze the dynamic diffusion performance. This strategy provides a simple and effective way to improve the high voltage stability of the cathode/electrolyte interface.
研究领域:
电化学
·
材料科学
·
能源存储
·
固态电池
·
界面工程
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2022
·
IF 8.025
Jian Wang,Zhiyu Xun,Chenyang Zhao,Yang Liu,Jiyou Gu,Pengfei Huo
Soy protein isolate (SPI) is one of the most abundant plant proteins in nature. Enormous studies have been carried out on SPI-based materials, however, the application for energy storage devices is still limited due to its fiddly film forming process and lack of electrochemical performance. Herein, we presented a SPI-based polymer electrolyte by grafting modification with the hydrophilic functional monomer acrylamide (AM). The optimized gel polymer electrolyte (GPE) exhibited an excellent ionic conductivity up to 5.10 mS cm −1 , which was greatly higher than gel polymer electrolyte based on original pure SPI (1.84 mS cm −1 ). More significantly, supercapacitors constructed by grafting-modified SPI delivered a specific capacitance of 141.74 F g −1 at 1.0 A g −1 and exhibited high capacitance retention of 95% after 8000 charge−discharge cycles. Beyond that, redox-active polymer electrolyte based on grafting-modified SPI combining with KI enormously improved the energy density of supercapacitor up to 27.52 Wh kg −1 at a current density of 0.5 A g −1 . This work provided a novel and facile strategy to obtain a high-performance SPI-based polymer electrolyte and laid an experimental foundation for the high-value application of SPI in the field of energy storage devices.
研究领域:
材料科学
·
高分子化学
·
能源存储
·
生物基材料
·
电化学
✓ 已验证
DOI
高影响因子
Journal of Energy Chemistry
·
2021
·
IF 9.676
Pengfei Zhou,Jing Zhang,Zhennan Che,Zuhao Quan,Ju Duan,Xiaozhong Wu,Junying Weng,Jinping Zhao,Jin Zhou
P2-Na 0.67 Ni 0.33 Mn 0.67 O 2 is considered as a promising cathode material for sodium-ion battery (SIBs) because of its high capacity and discharge potential. However, its practical use is limited by Na + /vacancy ordering and P2-O2 phase transition. Herein, a Ti 4+ /F − co-doping strategy is developed to address these issues. The optimal P2-Na 0.67 Ni 0.33 Mn 0.37 Ti 0.3 O 1.9 F 0.1 exhibits much enhanced sodium storage performance in the high voltage range of 2.0–4.4 V, including a cycling stability of 77.2% over 300 cycles at a rate of 2 C and a high-rate capability of 87.7 mAh g −1 at 6 C. Moreover, the P2-Na 0.67 Ni 0.33 Mn 0.37 Ti 0.3 O 1.9 F 0.1 delivers reversible capacities of 82.7 and 128.1 mAh g −1 at −10 and 50 °C at a rate of 2 C, respectively. The capacity retentions over 200 cycles at −10 °C is 94.2%, implying more opportunity for practical application. In-situ X-ray diffraction analysis reveals that both P2-O2 phase transitions and Na + /vacancy ordering is suppressed by Ti 4+ /F − co-doping, which resulting in fast Na + diffusion and stable phase structure. The hard carbon//P2-Na 0.67 Ni 0.33 Mn 0.37 Ti 0.3 O 1.9 F 0.1 full cell exhibits a high energy density of 310.2 Wh kg −1 and remarkable cyclability with 82.1% retention after 300 cycles at 1 C in the voltage range of 1.5–4.2 V. These results demonstrate that the co-doping Ti 4+ /F − is a promising strategy to improve the electrochemical properties of P2-Na 0.67 Ni 0.33 Mn 0.67 O 2 , providing a facile tactic to develop high performance cathode materials for SIBs.
研究领域:
材料科学
·
电化学
·
能源存储
·
无机化学
·
固态化学
·
电池技术
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2023
·Vol. 11
·期 6
·2979-2984
·
IF 11.9
Wu Wei,Zhihong Wang,Liyun Yao,Hao Jiang,Chunzhong Li
Development of Ni-rich and Co-poor cathodes (Ni ≥ 80%, Co ≤ 5%) is indispensable for the next-generation lithium-ion batteries (LIBs) owing to the serious impact of scarce resources and fragile supply chain of cobalt, but they suffer from a more prominent lattice oxygen emission with serious Li/Ni intermixing as well as worsening crystal and interface structure. Herein, CeO2−x-coated LiNi0.9Co0.045Mn0.045Al0.01O2 has been demonstrated to stabilize lattice oxygen by the well-dispersed Al–O bonds and the reversible oxygen-storage protective layer. The in situ DEMS and ex situ spectral analyses verified the negligible O2 and CO2 emission, even charging to 4.4 V, and the formation of stable cathode–electrolyte interfacial membrane. The as-obtained cathode exhibited a reversible specific capacity as high as 223 mA h g−1 at 0.1C and 140 mA h g−1 even at 10C with 96.7% capacity retention at 1C after 100 cycles in a coin-type half-cell. About 90.1% capacity retention could still be obtained at 1C in a pouch-type full-cell after 300 cycles. This work provides a viable cathode for durable LIBs by stabilizing the lattice oxygen of Ni-rich and Co-poor cathodes.
研究领域:
电化学
·
材料科学
·
能源存储
·
锂离子电池
·
固态化学
·
表面科学
·
电极材料
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2017
·
IF 3.012
Haojie Zhu,Ke Yang,Hua Lan,Shangshu Qian,Haoxiang Yu,Lei Yan,Nengbing Long,Miao Shui,Jie Shu
In this work, Na 2 Ti 3 O 7 is fabricated as lithium storage material via one-step solid state reaction. Worked as anode material , Na 2 Ti 3 O 7 delivers a stable electrochemical performance with good lithium storage capability. Structural analyses show that Na 2 Ti 3 O 7 anode experiences slight volume change during electrochemical lithiation/delithiation process. Moreover, the reversibility of structural evolution is further demonstrated by in-situ X-ray diffraction technique . All these evidences prove the cycling stability of Na 2 Ti 3 O 7 as lithium storage material. Besides, the kinetic properties of the Li + ion storage in Na 2 Ti 3 O 7 are systematically investigated. The observed results reveal that Na 2 Ti 3 O 7 delivers the lithium ions diffusion coefficient in the range of 10 − 14 –10 − 12 cm 2 s − 1 during the discharge process and 10 − 15 –10 − 12 cm 2 s − 1 during the recharge process. It suggests that Na 2 Ti 3 O 7 has good lithiation/delithiation kinetics in rechargeable batteries.
研究领域:
电化学
·
材料科学
·
能源存储
·
无机化学
·
固体化学
✓ 已验证
DOI
高影响因子
POLYMER
·
2023
·
IF 4.6
Peng Wei,Dong Huang,Chen Luo,Yang Sui,Xi Li,Qingkun Liu,Bensheng Zhu,Chuanbo Cong,Qiong Zhou,Xiaoyu Meng
Due to its uncomplicated manufacturing procedure for large-scale industrialization and adaptable conductivity, the competitive proton exchange membrane (PEM) matrix employed is sulfonated poly (ether ether ketone). However, the conflict between the strong proton conductivity and high stability of SPEEK-based PEM constantly upsets the equilibrium; the primary chain of SPEEK will conduct more protons if additional sulfonic acid is introduced, but it also causes a high swelling ratio and lowers stability. To tackle this challenging issue, we coupled the high intrinsic proton conductivity of phosphotungstic acid (HPW) and the excellent stability of polyimide (PI) nanofibers in a single PEM. In particular, sandwich-structure hybrid membranes (PI/SPEEK + HPW) were created to reduce HPW loss under operational conditions, further improving stability. Consequently, the swelling ratio and conductivity of the premium sandwich-structure PI/SPEEK + HPW-20 were 29% and 223.4 mS cm −1 under 60 °C and 100% RH, their respective values were 8% larger than those of SPEEK. Its proton conductivity reached 170.9 mS cm −1 during 13 days of exposure under 60 °C and 100% RH, which would be 30% better than that of SPEEK over the same treatment. Protons in these membranes were transported through Grotthus and vehicle mechanism, and the establishment of an acid-rich layer at the surface among PI nanofiber with HPW/SPEEK, which was confirmed by FTIR, XPS , and TEM , is responsible for these superior performances. From our point of view, our findings might encourage more studies into the creation of high-performance PEM.
研究领域:
材料科学
·
高分子化学
·
能源材料
·
电化学
·
膜科学与技术
✓ 已验证
DOI
高影响因子
Energy Technology
·
2021
·Vol. 10
·期 2
·2100350
·
IF 3.631
Liyue Xiao,Shuangrui Yao,Jie Liu,Hanjun Zou,Yanqin Xu,Yuan Cao,Changguo Chen
The nickel-based metallic organic framework (Ni-MOF) [Ni 2 (OH) 2 (C 8 H 4 O 4 )] material with a hierarchical microblocks structure is efficiently synthesized in 2 h by the ultrasonic method. At the moment Ni-MOF is used as the electrode materials and the supercapacitors (SCs) perform very well with great electrochemical capacity which exhibited particular electric capacitance of 631 C g −1 at a current density of 1 A g −1 . This is one of the highest performances and the shortest synthesis time reported so far for MOFs. Besides, there is a battery – SC hybrid SC assembled by using Ni-MOF and activated carbon. On the condition of having a power density of 302.2 W kg −1 with the voltage window of 1.2 V, the SC produces an energy density of 28.5 W h kg −1 . During the same period, the SC maintains outstanding cycling stability capacitance retention of 85.5% after 3000 cycles at current density of 10 A g −1 . The great electrochemical capability is due to the distinct crystal texture and particular morphological feature. Herein, it is displayed that the ultrasonic method is a fast and effective approach for preparing Ni-MOF SC electrode materials.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
POLYMERS FOR ADVANCED TECHNOLOGIES
·
2019
·Vol. 30
·期 9
·2313-2320
·
IF 2.162
Hui Zhao,Si-Qi Zhao,Guo-Hua Hu,Qun-Chao Zhang,Yang Liu,Chong-Xing Huang,Wei Li,Tao Jiang,Shuang-Fei Wang
A facile method was developed to synthesize a new type of polyhedral oligomeric silsesquioxane (POSS). It contained a single amine group and seven aliphatic moieties on its corners. FT-IR, 1 H-NMR, 13 C-NMR, 13 C- 1 H COSY, and 1 H- 1 H COSY confirmed that cages with eight corners were the main part of the product. This new POSS was used to modify the structure of hexamethylene diisocyanate trimer and then copolymerized with hexamethylene diisocyanate and poly (tetramethylene glycol) to get a serious of waterborne polyurethane (WPU)/POSS hybrid materials with low dielectric constants for microelectronics applications. The results showed that POSS particles were uniformly dispersed in the WPU dispersions. The WPU/POSS films did not show any macrophase separation, even when the POSS content was as high as 16%. As the POSS content increased from 0% to 16%, the tensile strength was increased from 2.3 to 7.3 MPa, the dielectric constant was decreased from about 2.9 to 2.0, and the thermal stability of the WPU/POSS was also improved.
研究领域:
高分子科学
·
材料化学
·
纳米复合材料
·
电子封装材料
·
功能高分子
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）