MATERIALS CHEMISTRY AND PHYSICS
·
2024
·
IF 4.3
Yiwen Li,Cuicui Hu,Shikuan Xu,Qi Guo,Pengfei Qi,Rong Li,Yanjun Xing
The removal of organic dyes from wastewater is crucial for environmental protection and water treatment. In this study, a ZIF-8/poly(vinyl alcohol) (PVA) composite was prepared for highly efficient dye adsorption using the contra-diffusion method. We investigated the conditions for ZIF-8-PVA to adsorb congo red (CR), including the influences of contact times, initial CR concentrations, pH values, and cyclic use. The results demonstrated that ZIF-8-PVA had a high Brunauer-Emmett-Teller (BET) surface area of 1704.03 m 2 /g. It exhibited a high removal efficiency of 98.43 % for CR, and its maximum adsorption capacity was 829.39 mg/g. After six cycles of adsorption, the removal efficiency of CR remained over 94.36 %. The removal efficiency of CR under a range of pH from 3 to 10 was consistently over 96.30 %. Moreover, ZIF-8-PVA also displayed adsorption capacity for various cationic and anionic dyes. The adsorption process aligned well with both the Langmuir model and the pseudo-second-order kinetic model. Based on FTIR, XPS, and swelling degree analyses, the adsorption mechanism was elucidated. Due to its universality and reusability, ZIF-8-PVA is suitable for practical application.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
·
2018
·
IF 2.207
Lvye Yang,Yi Feng,Dongbo Yu,Jianhao Qiu,Xiong-Fei Zhang,Dehua Dong,Jianfeng Yao
ZIF-8 wrapped two-dimensional ZIF-L(Co) was prepared. By adjusting the Zn 2+ concentration in precursor, ZIF-8 layer with different thickness was coated onto sheet-like ZIF-L. After carbonization, hierarchical porous carbon with CNTs wrapping was formed. Proper ZIF-8 coating would result in the porous carbon with relative high BET surface area, N content, electrical conductivity and proper pore size distribution ; thus showing higher supercapacitive performance than that of carbonized ZIF-8 or carbonized ZIF-L. The highest specific capacitance is 274 F/g for carbonized composite materials compared to that of 220 F/g for carbonized ZIF-8 and 57 F/g for carbonized ZIF-L. Moreover, such composite sample (CZ-6) showed high stability and the energy density reached 6.99 W h/kg at a power density of 0.262 kW/k, which is better than most of other ZIF-based porous carbon reported before.
研究领域:
材料科学
·
能源存储
✓ 已验证
产品关联
DOI
高影响因子
Nanomaterials
·
2024
·Vol. 14
·期 11
·975
·
IF 4.4
Shuilan LYU,Xin Zhang,Sheng Huang,Shuanjin Wang,Min Xiao,Dongmei Han,Yuezhong Meng
Lithium metal batteries (LMBs) are anticipated to meet the demand for high energy density, but the growth of lithium dendrites seriously hinders its practical application. Herein, we constructed a kind of composite separator (ZIF-90@PP) consisting of zeolite imidazole framework-90 (ZIF-90) and polypropylene (PP) to promote the uniform deposition of Li+and inhibit the growth of lithium dendrites. The aldehyde groups interacting with TFSI−and the nitrogen-containing negative groups attracting Li+of ZIF-90 can facilitate the dissociation of LiTFSI to release more Li+, thus alleviating the influence of space charge near the electrode surface and accelerating the transfer of Li+. Not only does the excellent electrolyte wettability of ZIF-90 enhance the electrolyte retention capacity of the separator, but the orderly nano-channels in ZIF-90 also restrict the free migration of anions and homogenize the distribution of Li+. Consequently, the functional separator achieves a long-term stable Li plating/stripping cycling for over 780 h at 2 mA cm−2. Moreover, an impressive average coulombic efficiency of 98.67% at 0.5 C after 300 cycles is realized by Li || LFP full cells based on ZIF-90@PP with a capacity retention rate of 71.22%. The high-rate and long cycling performance of the modified Li || LFP cells further demonstrates the advantages of the ZIF-90@PP composite separator.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Shuping Wu,Weijian Shi,Lijuan Cui,Chao Xu
Compared to pure polymer membranes and inorganic membranes, mixed matrix membranes (MMMs) loaded with metal–organic frameworks (MOFs) exhibit higher permeability and selectivity. Zeolitic imidazolate framework (ZIF) is widely regarded as the most promising candidate for separation membrane materials due to its precise molecular sieving properties. However, there is an urgent need for scalable fabrication methods to produce flexible and sustainable MOF MMMs, which is largely unmet. Here, we report a non-solvent induced phase separation-spin coating (NIPS-SC) strategy for the preparation of highly permeable MOF MMMs. A porous support layer is formed by non-solvent induced phase separation of polyvinylidene fluoride (PVDF) and polyvinylpyrrolidone (PVP). Chitosan (CS), polyvinyl alcohol (PVA), and ZIF-8 are then coated on the PVDF support layer to synthesize the symbiotic and continuous MMM membrane. The synthesized membrane shows excellent separation performance for organic dye and heavy metal ions, as well as significant stability. The water permeate flux of the membrane is 342 L m –2 h −1 bar −1 . The micron-scale in the support layer facilitates rapid water permeation, while the porous ZIF-8 provides enhanced solute rejection selectivity. This strategy paves the way for the development of high-performance membranes for water purification.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2024
·
IF 4.9
Yile Fu,Zina Wang,Tian Tian,Guan Li,Jinghua Gu,Jun Zhou,Sheying Dong
Despite the promising potential of zeolitic imidazole framework-8 (ZIF-8) for dye adsorption, addressing challenges such as aggregation and recycling difficulties remains essential. Herein，a novel three dimensional (3D) carboxymethyl cellulose (CMC), graphene oxide (GO) and ZIF-8 hybrid aerogel (CGZ-3) was prepared via blending ZIF-8 into the CMC-GO matrix. The structure and composition of CGZ-3 were characterized by SEM, FT-IR, TG and XPS. Adsorption experiments were conducted to optimize various parameters affecting the behavior of methylene blue (MB) adsorption. The composite aerogel exhibited an obvious lamellar network structure, with a surface rich in oxygen-containing functional groups such as -OH and -COOH. CGZ-3 demonstrated a rapid adsorption rate for MB, achieving a removal efficiency of 96% within 15 minutes. The entire adsorption process was spontaneous and endothermic, consistent with the pseudo-first-order kinetic model and Langmuir adsorption isotherm model. The maximum theoretical adsorption capacity was 427.35 mg/g at 298 K. Selective adsorptions tests demonstrated high selectivity of the composite aerogel for MB, and dynamic adsorption further confirmed the exceptional adsorption capacity of CGZ-3. After five cycles of adsorption-desorption, the MB removal rate remained above 95%, with an adsorption capacity exceeding 240 mg/g, highlighting the stability and reusability of CGZ-3. Collectively, the CGZ-3 would be a potential material for the adsorptive removal of MB in practical water treatment.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2024
·Vol. 35
·期 26
·1-12
·
IF 2.8
Zhao Zhihua,Jin Ziying,Pan Yafang,Jin Guixin,Shen Xiaoqing,Wu Lan
In this paper, the humidity sensitive material ZIF-67 with rhombic dodecahedron structure was prepared by the co-precipitation method. The crystal structure, elemental composition, and morphology were comprehensively characterized utilizing diverse analytical techniques. The humidity sensing properties were investigated at room temperature (25 °C). The ZIF-67 humidity sensor exhibited preferable humidity sensing performance with a wide linear detection range (11% − 95% relative humidity (RH)), rapid response/recovery time (34 s/211 s), high response (120.05), good stability, and high resolution with a minimum detection limit of 1% relative humidity. The sensor also exhibited good repeatability and stability, demonstrating its potential applications in environmental monitoring, medical practice, aerospace technology, and other domains that require high-precision measurement. In addition, this study proposes a promising candidate material for humidity sensing, exhibiting vital potential in a specific area or application and having the potential to develop cutting-edge humidity sensors.
研究领域:
材料科学
·
传感器技术
·
环境监测
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHEMICAL PHYSICS
·
2024
·Vol. 160
·期 20
·
IF 3.1
Li Qingxia,Song Dongmei,Zhan Xinxing,Tong Xin,Hu Changgang,Tian Juan
Zeolitic Imidazolate Frameworks-8 (ZIF-8) is commonly used as an ideal precursor for non-noble metal catalysts because of its high specific surface area, ultra-high porosity, and N-rich content. Upon pyrolyzing ZIF-8 at 900 °C in Ar, the resulting material, referred to as Z 8 , displayed good activity toward the oxygen reduction reaction (ORR). Then the ZIF-8 was mixed with various conductive carbon materials, such as multiwall carbon nanotubes (MWCNTs), Acetylene black (ACET), Vulcan XC-72R (XC-72R), and Ketjenblack EC-600JD (EC-600JD), to form Z 8 composites. The Z 8 /MWCNTs composite exhibited enhanced ORR activity owing to its network structure, meso-/microporous hierarchical porous structure, improved electrical conductivity, and graphitization. Subsequently, iron and nitrogen co-doping is achieved through the pyrolysis of a mixture comprising Fe, N precursor, and ZIF-8/MWCNTs, which is denoted as FeN-Z 8 /MWCNTs. The intrinsically high electrical conductivity of MWCNTs facilitated efficient electron transfer during the ORR, while the meso-/microporous hierarchical porous structure and network structure of Fe, N co-doped ZIF-8/MWCNTs promoted oxygen transport. The presence of Fe-containing species in the catalyst acted as activity centers for ORR. This strategy of preparing Z 8 composites and modifying them with Fe, N co-doping offers an insightful approach to designing cost-effective electrocatalysts.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Polymer Materials
·
2020
·
IF 0
Xu Ou,Yongyuan Ren,Jiangna Guo,Yingjie Zhou,Yinghui Yuan,Qinbo Liu,Feng Yan
It is highly challenging to separate stabilized water/oil emulsions with sizes below 20 μm. Here, we propose a simple and scalable process via the in situ grafting of ZIF-8 nanoparticles and a poly(ionic liquid) (PIL) onto a commercial cotton cloth (CC) fabric. Switchable wettability between superhydrophilicity/underwater superoleophobicity and superhydrophobicity/superoleophilicity was easily realized via the anion exchange of the PIL. ZIF-8 nanoparticles effectively improved the superhydrophilicity and superolelphilicity of ZIF-8@PIL-grafted cotton cloth (CC-ZIF-PIL), while also performing the dual functions of the separation of oil-in-water (O/W) and water-in-oil (W/O) emulsions. Accordingly, effective water/oil emulsion separation with a high efficiency (η > 99%), selectivity, stability, and durability was obtained using the CC-ZIF-PIL. These features indicate that CC-ZIF-PIL has promising application in switchable water/oil emulsion separation devices.
研究领域:
材料科学
·
环境工程
✓ 已验证
产品关联
DOI
CRYSTENGCOMM
·
2019
·Vol. 21
·期 45
·6935-6944
·
IF 3.382
Qunling Fang,Yuhang Sun,Jinyu Duan,Linfeng Bai,Kezhu Xu,Qinshan Xiong,Huajian Xu,Ken Cham-Fai Leung,Ailing Hui,Shouhu Xuan
Metal–organic framework (MOF)-derived nanostructures exhibit wonderful characteristics and possess broad application potential by modulating the complex composition and inner nanostructure. Although various MOF-based nanocomposites have been successfully developed, a facile method that can easily modulate the structure-dependent chemical components of the MOF-derived hybrids remains a challenge. By coating zeolitic imidazolate framework-8 (ZIF-8) with Au/polydopamine (Au/PDA) via in situ redox-oxidation polymerization of HAuCl4 and dopamine, it was found that the ZIF-8 templates were simultaneously etched off to give Au/PDA hybrid microcapsules with a cubic shape. This one-step sacrificial templating process followed a competing chelation between gold ions and Zn2+ cations to 2-methylimidazole and PDA; thus, both the hollow and the yolk-like hybrid cubic microcapsules were controllably obtained by varying the synthetic dynamics. Owing to the hollow nature, penetrated PDA shell, well-distributed Au nanocrystals, and unique stable nanostructure, the non-spherical Au/PDA hybrid cubic microcapsules showed high performance in catalyzing the reduction of 4-nitrophenol as well as adsorption/release of ibuprofen as a model drug. Moreover, this simple strategy offers a controllable design in developing multifunctional nanocomposites with definite inner nanostructures and activities for nanocatalysis, drug delivery, energy storage etc.
研究领域:
材料科学
·
纳米技术
·
催化化学
·
药物递送
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 26
·21337-21344
·
IF 3.289
Hong Jiang,Songlin Xue,Yefei Liu,Rizhi Chen,Weihong Xing
The Pd@ZIF-L catalysts with uniform crosshair-star shape and a size of about 20 μm were fabricated by an assembly method that enables the crystallization of ZIF-L in water with the presence of polyvinylpyrrolidone (PVP)-stabilized Pd nanoparticles (NPs). The physical and catalytic properties of the Pd@ZIF-L catalysts are greatly affected by the molar ratios of 2-methylimidazole (2-MeIM)/Zn2+ and PVP/Zn2+. Their catalytic activities were evaluated by the catalytic reduction of p-nitrophenol to p-aminophenol. The results indicate that a lower molar ratio of 2-MeIM/Zn2+ is beneficial for the increase of Pd loading and p-nitrophenol conversion, but a suitable molar ratio (≥20) of 2-MeIM/Zn2+ is helpful to the crystallization of ZIF-L and the encapsulation of the Pd NPs within the ZIF-L framework. The Pd@ZIF-L catalyst synthesized at a lower PVP/Zn2+ molar ratio has higher Pd loading and p-nitrophenol conversion due to the easy adsorption of PVP–Pd NPs onto the ZIF-L surfaces. This work would aid the development of high-performance Pd@ZIF-L catalysts.
研究领域:
材料科学
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
POLYMER SCIENCE SERIES A
·
2023
·Vol. 65
·期 1
·72-81
·
IF 1
Ting Pu,Yang Qin,Xu Nan,Chen Fubin,Zhang Gui,Yang Chunyan
Abstract Naringenin, an herbal ingredient possesses a diversity of pharmacological action and bioactive functions. In this study, surface molecularly imprinted polymers named as Zeolite imidazolate framework-8 were successfully synthesized and applied in the selective adsorption of naringenin. A series of adsorption experiments evaluated the adsorption properties of polymers. The results showed that the molecularly imprinted polymers had a higher adsorption capacity than non-imprinted polymers. In addition, they have good selectivity for Naringenin compared with other flavonoid compounds, and its imprinting factor for naringenin is as high as 3 in single solutions. The Scatchard plots showed two distinct linear portions, indicating that two kinds of binding sites exist in the molecularly imprinted polymers. After eight cycles, the adsorption capacity of polymers did not decrease significantly in the initial affinity. These results demonstrated that prepared molecularly imprinted polymers could be promising functional materials for the selective adsorption of naringenin.
研究领域:
材料科学
·
药理学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Keming Zhang,Xianye Luo,Sihui Li,Xiaohe Tian,Qingnan Wang,Chenlu Liu,Yanting Tang,Xiaoting Feng,Rui Zhang,Shuangfeng Yin,Shaofei Wang
Developing high-performance H 2 /CH 4 separation membranes is of great potential for H 2 production in the petroleum industry. Incorporating nanofillers into a polymer matrix to form mixed matrix membranes (MMMs) can elevate selectivity and permeability, but poor polymer-filler interfacial compatibility and filler aggregation are formidable problems. Targeting this, we propose a novel approach by incorporating a metal–organic framework (MOF) gel, ZIF-8 gel, as the versatile filler to a high free volume polymer PIM-1 and investigate the H 2 /CH 4 separation capabilities of the MMMs. Benefiting from the gel network morphology of ZIF-8, they were dispersed evenly in the PIM-1 matrix. The interconnected gel network structure of ZIF-8 gel helped to construct continuous gas transport pathways in the polymer. As a result, the H 2 /CH 4 separation performance was notably improved, demonstrating a substantial increase in H 2 permeability by 78.9% (exceeding 6800 Barrer) and a 38.0% enhancement in H 2 /CH 4 selectivity at a ZIF-8 gel loading of 31.0 wt%. These improvements surpassed the upper bound established in 2008. The Maxwell and Lewis-Nielsen models were developed to clarify gas transport mechanisms across membranes, and the experimental data of ZIF-8 gel/PIM-1 was well-matched with the calculated results of the Lewis-Nielsen models. Adopting MOF gel as fillers may pave a new approach to design high-performance MMMs with interconnected transport pathways.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）