JOURNAL OF APPLIED POLYMER SCIENCE
·
2022
·Vol. 139
·期 35
·e52859
·
IF 3.057
Lu Han,Lingxiao Li,Rongsheng Gao,Xueyan Liu,Chengyou Kan
The relationships between morphology and properties are important for functional polymer particles. In this work, stable core/shell PMMA/P(MMA- co -PDSECAE) (C/S) latexes with uniform particle size are first prepared through semi-continuous soap-free seeded emulsion polymerization of methyl methacrylate (MMA) and 2-(((2-[pyridin-2-yldisulfanyl]ethoxy)carbonyl)amino) ethyl acrylate (PDSECAE), and thiol-functionalized core/shell PMMA/P(MMA- co -PDSECAE)-SH (C/S-SH) submicron particles (SPs) are then obtained by reduction of disulfide bonds with dithiothreitol (DTT). Adsorption behaviors of heavy metal ions on the SPs are investigated. Results show that, the C/S-SH SPs, with more thiol groups distributed closer to the surface, have nearly twice the Pb 2+ adsorption capacity of the homogeneous SPs prepared via batch emulsion polymerization. The C/S-SH SPs show strong selective adsorption capacities toward Hg 2+ and Pb 2+ , and maximum adsorption capacities reach 0.477 and 0.303 mmol g −1 , respectively. Due to their high selectivity, adsorption capacity, specific surface area and simple preparation process, these core/shell SPs have promising applications in water treatment.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2020
·Vol. 137
·期 45
·49413
·
IF 2.52
Ziyue Yang,Dongcheng Sun
A facile method for preparing supramolecular waterborne polyurethane (WPU) based on quadruple hydrogen bonds (4H-WPU) is reported. Herein, 4H-WPU with quadruple hydrogen bonds in main chain were synthesized by poly (1,4-buthylene-neopentylene adipate glycol) as soft segment, 2-ureido-4[1H]-pyrimidinone (UPy) functionalized monomer, isophorone diisocyanate, 2,2-Bis(hydroxymethyl)propionic acid (hydrophilic monomer), isophorondiamine, triethylamine (neutralizer), and monoethanolamine (blocking agent) as hard segment. The molecular weight of 4H-WPU was controlled around 18,000 consistently. The properties of 4H-WPU with different content of hydrophilic group, hard segment, and UPy units were characterized and the results could provide the reference for preparing supramolecular WPU with high mechanical and self-healing performance while maintaining dispersion stability. The tensile strength of 4H-WPU was 10 times of the blank sample. The healing time of scratched 4H-WPU film was inversely proportional to the content of UPy- functionalized monomer and the shortest healing time is 2.5 hr at 80°C. Mechanical performance of healed films can be restored to more than 90%.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2022
·Vol. 139
·期 21
·52224
·
IF 3.057
Chuangchuang Sun,Wei Zhang,Yihua Cui,Dongyue Liu
A phosphazene-triazine bi-base sulfonate compound (CPNS) was synthesized using hexachlorocyclotriphosphazene, cyanuric chloride, and sodium p-hydroxybenzene sulfonate as raw materials. The chemical structure was determined by FTIR, 1 H NMR 31 P NMR (NMR stands for nuclear magnetic resonance), and elemental analysis of P, Na. To study the flame retardant properties of CPNS, a series of modified polycarbonate (MPC) with different ratios of CPNS were prepared. The flame retardant performance and thermal stability of CPNS/MPC were characterized by limiting oxygen index (LOI), UL-94 vertical burning test, cone calorimetry test, and TG. Results show that when CPNS is added to 0.3%, the CPNS/MPC can pass the UL94 V-0 level with an LOI value of 35.3% and reduce the peak heat release rate by 16.89% during the combustion. TG results show that adding 0.1% CPNS can decrease the initial decomposition temperature of the MPC by 68°C in nitrogen and 27°C in air. The reduction of the initial decomposition temperature means that the flame retardant promotes the isomerization reaction of polycarbonate accelerates the formation of an intermediate char on the surface. Investigation of intermediate char residue's morphology and chemical structure demonstrates that CPNS promotes the formation of more complete and compact char residue, which acts not only there is increased opportunity for radical recombination reactions in the condensed phase but also as physical barriers to inhibit the transfer of heat and oxygen, resulting in good flame retardant properties.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2022
·Vol. 139
·期 32
·e52765
·
IF 3.057
Pengjia Shan,Hengyu Lu,Ning Chen,Hongzhi Liu,Xianhui Zhang,Xiaohuan Liu
Designing biobased hyperbranched polyesters from vegetable oil has been attracting considerable interests from academic industrial communities. Herein, a novel fully biobased hyperbranched polyester (HBPE) was prepared by self-condensation of AB 2 -type bioderived monomer based on methyl ricinoleate (MR), a castor oil-derived renewable chemical. The reaction conditions were optimized to obtain the AB 2 -type monomer in a high conversion ratio (up to 87%). The self-condensation of AB 2 -type monomers was carried out in the presence of two kinds of transesterification catalysts (Ti(OBu) 4 versus Zn(Ac) 2 ), among which Ti(OBu) 4 was found to be more efficient one and yield higher molecular weights in the range of 5800~11,500 g/mol. The resulting HBPEs were characterized in terms of Fourier transform infrared spectroscopy, nuclear magnetic resonance, differential scanning calorimetry, and thermogravimetric analysis. The degree of branching was calculated to be 0.33~0.39. Thermal analysis revealed that the as-prepared HBPEs were amorphous with tunable glass transition temperatures ranging from −44.8 to −24.6°C. All the prepared HBPEs exhibited good thermal stability with the maximum onset decomposition temperature ( T onset ) up to 294.6°C. These structural features and properties of resulting biobased HBPEs enabled them to act as a potential ‘greener’ additive for polymers.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2020
·Vol. 137
·期 34
·48982
·
IF 2.52
Jian Yang,Tong Zhang,Yue Yin,Wenhong Jiang,Yunzhe Du,Xiaofei Zhu,Bo Jiang,Yudong Huang
Reactive group content was a key parameter in polymer curing process. However, the conventional methods to measure the curing were destructive and time consuming. In this article, near-infrared spectra technology had been applied for reactive group analysis of the photothermal curing silicone to achieve rapid nondestructive and quantitative detection. The calibration model was developed about epoxy value and CC double bond value, with determination coefficient ( R 2 ) of 0.9631 and 0.9689. Root mean square error of prediction were 0.0179 and 0.0143 by partial least square regression. The optimized calibration model was used to predict the content of epoxy value and CC double bond value in the photothermal curing process, it proved that the silicone resin cured under UV-radiation and heat. This novel method provided a promising approach to analysis the curing mechanism and quality parameters of resin.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2019
·Vol. 137
·期 24
·48803
·
IF 2.188
Yang Xu,Ying Xiong,Shaoyun Guo
In this work, poly( ε -caprolactone) (PCL) and liquid plasticizer were combined used to plasticize poly(vinyl chloride) (PVC), and the possibility of using PVC/PCL/plasticizer blends to fabricate soft PVC with enhanced migration resistance was investigated. Through partial replacement of liquid plasticizers in soft PVC by equal quantity of PCL, flexibility was maintained while extraction loss of plasticizer by organic solvent was reduced significantly. Furthermore, crystallization of PCL in PVC/PCL/plasticizer blends with low PCL content was observed, and crystallization rate of PCL was found to be influenced by plasticizer contents and structures. For instance, crystallization rate of PCL in PVC/PCL/diisononyl phthalate (DINP) (100/40/100) was 3.7 times faster than in PVC/PCL/DINP (100/40/80), while crystallization rate of PCL in PVC/PCL/dioctyl adipate(DOA)(100/40/100) was 8.3 times faster than in PVC/PCL/diisononyl cyclohexane-1,2-dicarboxylate (DINCH) (100/40/100). Low-field 1 H NMR test manifested that different crystallization rate of PCL in PVC/PCL/plasticizer blends with different plasticizer structures was triggered by difference in plasticizers' compatibility with PVC, that is, the number of interaction point between PVC and plasticizers. It is concluded that PCL crystallization favored by liquid plasticizers in PVC/PCL/plasticizer blends was induced by interaction competition between PVC/plasticizer and PVC/PCL. As plasticizer content increases or its compatibility with PVC decreases, interaction competition becomes more intense and consequently faster crystallization of PCL occurs. Thus, to obtain soft PVC products with improve migration resistance while avoiding PCL crystallization, the total content of plasticizer (including both liquid plasticizer and PCL) should be lower than 66 phr (40 wt %). © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137 , 48803.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2021
·Vol. 139
·期 18
·52075
·
IF 3.125
Bihua Xia,Xuhui Zhang,Yang Wang,Ting Li,Jie Jiang,Mingqing Chen,Tianxi Liu,Weifu Dong
This paper reported a new kind of multilayer cross-linking polyetherimide/Ti 3 C 2 T x MXenes material with pores channel structure for electromagnetic interference shielding. Polyetherimide was used as the resin material, ethylenediamine (EDA) was used as the cross-linking agent, special multilayer and pores channel were used as the shielding structure, and Ti 3 C 2 T x MXenes was used as the electromagnetic wave shielding medium. By adjusting the content of EDA, the cell structure, electromagnetic interference shielding efficiency, and tensile strength of multilayer cross-linking PEI/Ti 3 C 2 T x MXenes shielding material could be controlled. The more EDA content, the higher cross-linking degree, the smaller the cellular size, the higher the electromagnetic interference shielding efficiency, and the stronger the tensile strength.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2021
·Vol. 139
·期 6
·51625
·
IF 3.125
Yingshi Zhao,Qinyong Song,Yuebin Lin,Feng Chu,Yanchun Wei,Sen Liu,Changjiang Pan,Li Quan,Yiqing Wang
Fluorescein is a traditional organic fluorescent dye that has the disadvantage of agglomeration-induced fluorescence quenching and photobleaching due to its large hydrophobic conjugate π-π system, which makes them have limitations in many fields of application. A method of polymer modification is revealed to address this issue. In this study, fluorescein molecules were modified by polycaprolactone (PCL) to obtain PCL grafting fluorescein (P x F), and subsequently assembled with PEG-PCL to obtain fluorescent nanoparticles (PPxF). PPxF would realize long term cellular fluorescence imaging. PCL polymerization induces self-assembly, which effectively avoids fluorescence quenching caused by fluorescent molecules aggregation, and at the same time well inhibit the energy transfer with oxygen to improve photostability. This method is a good way to improve the fluorescence properties of fluorescent dyes, to be suitable for all traditional organic fluorescent dyes to greatly improve their fluorescence and hydrophilic properties and enhance their application fields.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2020
·Vol. 138
·期 16
·50229
·
IF 2.52
Pengxuan Zheng,Jiye Qiu,Xiangwei Wang,Zhiwei Yu,Yong Ma,Tingxi Li
The polymer electrolytes based on poly(vinylidene- co -hexafluoropropylene) (PVDF- co -HFP) have been widely studied and applied in devices for its excellent electrochemical and mechanical properties. Here, porous PVDF- co -HFP membrane modified with glass fibers (GFs) and polyvinyl pyrrolidone (PVP) were fabricated by phase-transfer method. When the dosage of GFs exceeded 1 wt%, the composite membranes exhibited 6.11 MPa tensile strength. When the dosage of GFs and PVP reached 1% (PVP 1 GF 1 ), respectively, the composite membranes in porous network structure possessed the highest electrolyte uptake of 251.02%, the thermal stability of 343°C and the ionic conductivity of 3.05 × 10 −3 S cm −1 . Electrochromic device (ECD) was assembled with PVP 1 GF 1 electrolyte, showing quick responses between the bleached and the color states within 3 s. The PVDF- co -HFP composite electrolyte was expected to be effective substitutes for liquid electrolytes used in ECDs.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2021
·Vol. 138
·期 34
·50849
·
IF 3.125
Shao-Xia Zhang,Long Xu,Zhi-Hui Chen,Shu-Ting Fan,Zhen-Jiang Qiu,Zi-Jun Nie,Bang-Jing Li,Sheng Zhang
γ-cyclodextrin (CD)-metal-organic framework (MOF)-K is developed as a new kind of green template for the preparation of hierarchical porous carbon (HPC). Three-level porous structure (micro-, meso-, and macro-pores) has been successful constructed by calcined γ-CD-MOF-K at 600°C. The fabricated carbon (HPC-600) shows good microwave adsorption ability due to its unique hierarchical porous structure (macropores allow microwave enter the interior of the absorbents, and then micro- and meso-pores attenuate the incident microwave effectively by multiple reflections and polarization loss caused.) The minimum reflection loss (RL) is − 23.5 dB and the effective absorption bandwidth (EAB, RL≤− 10 dB) is 4.3 GHz. This work provides a good reference for efficient and environment-friendly microwave absorbents. In addition, the applications of HPC-600 may further expand to adsorption, sensing and supercapacitors due to the hierarchically porous structure.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2020
·Vol. 137
·期 36
·49081
·
IF 2.52
Huan Yu,Haiyan Liu,Xiaoya Pang,Miaomiao Zhang,Hongyuan Yan,Ligai Bai
In this study, a composite poly(functional graphene oxide- co - N -isopropylacrylamide- co -trimethylolpropane triacrylate- co -ethylene dimethacrylate) (poly(f-GO- co -NIPAAm- co -TMPTA- co -EDMA)) monolith was prepared, in which f-GO was added. The obtained monolith was characterized by nitrogen adsorption–desorption isotherm and scanning electron microscopy. The monolith exhibited a homogeneous and continuous structure, good permeability, and large surface area. The composite monolith was used as solid-phase extraction absorbent in conjunction with high-performance liquid chromatography for enrichment of ursolic acid. The calibration equation was y = 73.3980 x + 0.2555, and the linear regression coefficient was 0.9987; The calibration curve was ranged from 1 to 700 μg ml −1 ; The limit of detection and limit of quantification values were 0.3 and 1.0 μg ml −1 , respectively; The intraday and interday precisions were less than 2.6 and 7.4%, respectively. The recovery was in the range of 84.44–111.76%. Moreover, the adsorption amount of ursolic acid on the composite monolith was compared with the monolith without f-GO added and silica gel-C18 adsorbent. The results showed that the composite monolithic column was feasible to be used as an online SPE absorbent, which exhibiting low back pressure, good permeability, and high adsorption capacity. In addition, this method provided the possibility to extract and analyze trace components from medicinal plants.
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2021
·Vol. 139
·期 15
·51943
·
IF 3.125
Xuejun Zhou,Jiyou Zong,Jun Lei,Zhongming Li
In this work, a series of spherical boron nitride/silicone rubber (sBN/SR) composites were prepared, and the influence of different shapes and sizes of BN on the thermal conductivities of the composites was investigated. Additionally, hybrid spherical boron nitride/silicon rubber (hybrid sBN/SR) composites were fabricated by synchronously incorporating two kinds of sBN particles into SR to perfect the thermal conduction paths, and a synergistic effect of the fillers was achieved. The thermal conductivity of the composite could reach 1.70 W/(m·K) at the 35 wt% filler content, which is clearly superior to the composite containing single type of filler and stands at a very high level at such a filler fraction according to the reported literature. Also, the experimental results were supported by the Agari's equation. In addition, the composites show a low hardness (shore A hardness < 60) due to the low filling content. The prepared materials hold great promise in thermal interface materials for thermal management of state-of-the-art electronic equipment.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）