文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2317至2328个,产品总数3,612个

切换升序
MOF
NANOTECHNOLOGY · 2021 ·Vol. 32 ·期 31 ·315502 · IF 3.874

MOF@MnO2 nanocomposites prepared using in situ method and recyclable cholesterol oxidase–inorganic hybrid nanoflowers for cholesterol determination

Dawei Xu,Cong Li,Yuqiu Zi,Dafeng Jiang,Fei Qu,Xian-En Zhao

In this work, through the in situ growth of MnO2 nanosheets on the surface of terbium metal–organic frameworks (Tb–MOFs), MOF@MnO2 nanocomposites are prepared and the fluorescence of Tb–MOFs is quenched significantly by MnO2. Additionally, the hybrid nanoflowers are self-assembled by cholesterol oxidase (ChOx) and copper phosphate (Cu3(PO4)2·3H2O). Then a new strategy for cholesterol determination is developed based on MOF@MnO2 nanocomposites and hybrid nanoflowers. Cholesterol is oxidized under the catalysis of hybrid nanoflowers to yield H2O2, which further reduces MnO2 nanosheets into Mn2+. Hence, the fluorescence recovery of Tb–MOFs is positively correlated to the concentration of cholesterol in the range of 10 to 360 μM. The limit of detection (LOD) of cholesterol is 1.57 μM. On the other hand, the hierarchical and confined structure of ChOx–inorganic hybrid nanoflowers greatly improve the stability of the enzyme. The activity of hybrid nanoflowers remains at a high level for one week when stored at room temperature. Moreover, the hybrid nanoflowers can be collected by centrifugation and reused. The activity of hybrid nanoflowers can continue at a high level for five cycles of determination. Therefore, it can be concluded that the hybrid nanoflowers are more stable and more economic than free enzymes, and they show a similar sensitivity and specificity to cholesterol compared with free ChOx. Finally, this strategy has been further validated for the determination of cholesterol in serum samples with satisfactory recoveries.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF ELECTROANALYTICAL CHEMISTRY · 2023 · IF 4.5

Modificationally doped Se element and in-situ doped V element to elevate the supercapacitor performance of Co-MOF

Guiquan Liu,Shiyu Li,Rumisa Baikeri,Guorong Wang,Zhiliang Jin

Metal-organic skeleton (MOF) with adjustable pore skeleton and finely reaction sites has been widely accepted in the application of high-performance supercapacitors. Here, the Se-Co-MOF-1 nano-particles obtained by modified doped Se element to Co-MOF and the CoV 3 -MOF nano-sheets obtained by in-situ doped V element in Co-MOF. As a result, Se-Co-MOF-1 and CoV 3 -MOF electrode materials have more electrochemical reactivity, better conductivity and better stability. At a certain current density, Se-Co-MOF-1 and CoV 3 -MOF electrode materials have better mass-specific capacitance and better rate performance than Co-MOF. Furthermore, the Se-Co-MOF-1//AC ASC and CoV 3 -MOF//AC ASC are also assembled, which show relatively excellent power density and energy density compared to similar work reported. The Se-Co-MOF-1//AC ASC and CoV 3 -MOF//AC ASC after 10,000 cycles, their mass-specific capacitance retention rate are still 70.00 %, which further shows the reliable stability of Se-Co-MOF-1 and CoV 3 -MOF electrode materials. This result proves that the synthetic schemes of MOF nano-sheets/nano-particles can be selected as the source of the strategy for preparing excellent electrode materials.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS · 2019 · IF 2.752

Gel-like ZnO/Zr-MOF(bpy) nanocomposite for highly efficient adsorption of Rhodamine B dye from aqueous solution

Wen Cui,Xiaoli Kang,Xiaoying Zhang,Xudong Cui

A highly efficient Rhodamine B (RhB) adsorbent based on a gel-like ZnO/Zr-metal-organic framework (ZnO/Zr-MOF) composite was prepared by reacting ZnO nanoparticles with glacial-acetic-acid-modulated Zr-MOF(bpy) via a sample solvothermal method. Introduction of ZnO greatly improved the texture properties of the parent Zr-MOF(bpy), and the resulting material exhibited an agglomerate morphology consisting of numerous quadrate nanoparticles, which is quite different from the cubo-polyhedron morphology of Zr-MOF(bpy). In this way, this composite showed a considerable RhB absorption capacity from aqueous solution in a wide pH range. The adsorption kinetics , isotherms and thermodynamics of the RhB adsorption by ZnO/Zr-MOF(bpy) were discussed and confirmed that this adsorption process satisfied pseudo-second-order kinetics and the Langmuir model, and was a spontaneous exothermic process. Moreover, the excellent adsorption performance is likely related to the synergism of hydrogen bonding , electrostatic interactions and π–π interactions between the ZnO/Zr-MOF(bpy) nanocomposite and RhB. The excellent texture properties of ZnO/Zr-MOF(bpy) promote the adsorption and diffusion of RhB on it, which is also crucial during the adsorption process.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Inorganic and Organometallic Polymers and Materials · 2019 ·Vol. 29 ·期 6 ·2124-2132 · IF 1.637

Eu3+/TFA Functionalized MOF as Luminescent Enhancement Platform: A Ratiometric Luminescent Sensor for Hydrogen Sulfide in Aqueous Solution

Wang Zirui,Wang Xinyu,Li Jingfang,Li Weizuo,Li Guangming

In this work, a facile and fast luminescence sensing platform for the ratiometric detection of hydrogen sulfide (H 2 S/HS − ) has been constructed by encapsulating the Eu 3+ /β-diketone chromophore into the host framework of MIL-140 (Eu 3+ /TFA@MIL-140C, TFA = 1,1,1-Trifluoro-2,4-pentanedione). It is well known that the energy transfer from the host framework or/and TFA to the Eu 3+ ions can be disturbed easily by some metal ions, such as Cu 2+ ions. Therefore, the ratiometric sensor was constituted with the Eu 3+ /β-diketone moiety as the response signal and the host framework moiety as the reference signal. Furthermore, on the basis of the hard–soft acid–base theory, the Cu 2+ ions could be rapidly caught by HS − , profiting from the low solubility of CuS, realizing the real-time detection by luminescence color change. This sensor shows remarkable property on the detection of H 2 S (HS − in water solution) with low limit of detection (LOD = 7.43 μM) and short response time (< 0.5 min). The good linearity between luminescent intensity and concentration makes the luminescent ratio meter feasible.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2022 · IF 6.371

MOF-derived core-shell Co9S8 @MoS2 nanocubes anchored on RGO to construct heterostructure for high-efficiency microwave attenuation

Fuling Li,Changgeng Li,Quan Xie,Xuelong Chen,Xiu-Zhi Tang,Tong Guo

Elegant material construction to realize high-efficiency microwave absorption with low filler loading is in strong demand yet remains challenging. Here we combine a self-assembly method followed by pyrolysis to fabricate core-shell Co 9 S 8 @MoS 2 nanocubes, which were uniformly anchored on reduced graphene oxide nanosheets (A-G/Co 9 S 8 @MoS 2 ) to form hierarchical heterostructures . The heterostructure was deliberately designated via chemical etching of in situ formed Co 9 S 8 derived from ZIF-67 and decoration of flower-like MoS 2 nanosheets. Owing to its synergic effect in compositions and well-designed heterostructure, the product A-G/Co 9 S 8 @MoS 2 exhibits excellent microwave absorption performance with low loading content. A minimum reflection loss of − 55.13 dB and effective absorption bandwidth of 6.61 GHz with filler loading of only 8 wt% was achieved, contributed by the good impedance matching and dual loss mechanism. This work provides a new pathway for designing low-filler loading high-performance microwave absorption materials.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2019 · IF 8.355

MOF-derived three-dimensional flower-like FeCu@C composite as an efficient Fenton-like catalyst for sulfamethazine degradation

Juntao Tang,Jianlong Wang

In this paper, a novel three-dimensional flower-like Fenton-like catalyst with iron-copper bimetallic NPs within the mesoporous carbon shell (FeCu@C) was successfully prepared through a simple pyrolysis of a [Fe,Cu]-BDC precursor and applied for catalytic degradation of sulfamethazine (SMT) in the presence of H 2 O 2 . The FeCu@C catalyst showed a 100% SMT removal within 90 min and a 72.3% total organic carbon (TOC) conversion within 240 min under the conditions of 20 mg L −1 SMT, 0.25 g L −1 FeCu@C, 1.5 mM H 2 O 2 , and initial solution pH 3.0. Combined with the characterization results, we proposed that the unique structure and composition of FeCu@C enable the catalyst to exhibit outstanding adsorption capability and catalytic performance in SMT degradation by H 2 O 2 activation. The porous flower-like carbon matrix not only favors the rapid diffusion of reactants towards the internal bimetallic nanoparticles (NPs), but also offers specific adsorption for the enrichment of SMT molecules from bulk solution through π − π interaction. In addition, the iron and copper species existing in the inner bimetallic NPs are available active sites for a Fenton reaction, and a possible synergistic effect between them could facilitate the generation of additional OH radicals to enhance SMT degradation. Moreover, the accumulation (i.e. adsorption) of SMT molecules on the surface of FeCu@C could increase their contact probability with the OH radicals generated from H 2 O 2 decomposition, further enhancing the reaction efficiency. With its high-magnetization properties, FeCu@C can be magnetically recovered and reused in SMT degradation. Furthermore, the possible reaction mechanism of the FeCu@C/H 2 O 2 system and SMT degradation pathways were also tentatively proposed.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY · 2023 · IF 10.9

Intrinsic electrochemical activity modulation of MOF-derived C/N-NiCoMn-LDH/Ag electrode for low temperature hybrid supercapacitors

Xiaohui Guan,Jingyang Chen,Enze Zhu,Penggang Yin,Liu Yang,Xin Guan,Guangsheng Wang

Layered double hydroxides (LDHs) are promising electrode candidates for supercapacitors. However, limitations like inferior cycling stability and unsatisfactory charge storage capability at low temperatures have exerted negative effects on their applications. Herein, a novel synthetic process has been elaborately designed and provided to have the composition and structure of the C/N-NiCoMn-LDH/Ag (C/N-CNMA) delicately regulated. Both the experimental and theoretical researches unveil that the incorporated manganese species and elemental silver could dramatically modulate the bandgap, crystallinity and surface electron structure of the LDH , leading to the remarkable improvement in its conductivity, exposed active sites and intrinsic electrochemical activity, and thus the OH* and O* adsorption free energy could be remarkably optimized, even at low temperatures. In addition, the low crystallinity C/N-CNMA is of great electrochemical compatibility with both the KOH aqueous electrolyte and the isobutyl alcohol (IPA) modulated organohydrogel electrolyte. By means of adjusting the solvation and hydrogen bonding in the electrolytes, the assembled hybrid supercapacitors deliver excellent energy density, power density and cycling stability in the temperature range of -30 to 25 °C. Specifically, the gel electrolyte with IPA as the anti-freezing functional additive displays high flexibility and ionic conductivity at low temperatures.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Sustainable Energy & Fuels · 2021 ·Vol. 5 ·期 4 ·1095-1102 · IF 6.367

Enhanced OER performance of composite Co–Fe-based MOF catalysts via a one-pot ultrasonic-assisted synthetic approach

Fen Li,Jinxia Li,Lihui Zhou,Sheng Dai

Metal–organic frameworks (MOFs) have recently emerged as one of the most promising electrocatalysts for oxygen evolution reaction (OER) due to their abundant metal sites and porous structures. However, the limited modulation of the single-metal sites of MOF-based catalysts restricts further promotion of their catalytic performance. In this work, we have developed a composite Co–Fe-based MOF catalyst based on Co–BDC (1,4-benzenedicarboxylate) and Fe–BDC, which modulated the electronic structure via the construction of the heterogeneous interfaces of Co–BDC and Fe–BDC. Enhanced OER performance was achieved in the composite Co–Fe–BDC catalyst, far more exceeding that of the counterpart Co–BDC or Fe–BDC. In addition, it was found that additional ultrasonic treatment effectively facilitated the dispersion of Fe–BDC on Co–BDC, as compared to the composited MOF obtained via physical mixture or magnetic stirring. The composite Co–Fe–BDC catalyst prepared via the ultrasonic-assisted one-pot synthesis exhibited an overpotential of 295 mV at a current density of 10 mA cm−2, which was even superior to that of the commercial RuO2 catalyst, while holding a lower cost and excellent stability. Insights gained in this study may shed new lights on heterogeneous interfaces and composition strategy of MOF-based electrochemical catalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2019 · IF 8.355

MOF-derived bimetallic Fe-Ni-P nanotubes with tunable compositions for dye-sensitized photocatalytic H2 and O2 production

Shumin Li,Jun Tan,Zhejun Jiang,Jin Wang,Zhengquan Li

Dye-sensitized systems show promising in photocatalysis because they can separate the tasks of light absorption, charge generation and surface catalysis to two coupled components. In this system, it is crucial to develop suitable catalysts capable of receiving dye-injected charges and having high activity to a given reaction. Aiming to photocatalytic H 2 and O 2 production, we present a metal-organic framework derived route to prepare bimetallic Fe-Ni-P nanotubes using Fe-Ni-MIL-88 nanorods as templates. When integrated with different dyes, these Fe-Ni-P nanotubes can serve as efficient catalysts for photocatalytic H 2 and O 2 production, respectively. Additionally, catalytic activities of such dye-sensitized systems can be conveniently regulated by tailoring the metal compositions in Fe-Ni-P nanotubes. The photocatalytic H 2 production of Fe 1 -Ni 2 -P can reach 5420 μmol g cat −1  h −1 under eosin-Y sensitization, which is 24 times and 6.7 times higher than Fe 2 P and Ni 2 P, respectively. The photocatalytic O 2 production of Fe 1 -Ni 2 -P can reach 900.3 μmol g cat −1  h −1 under [Ru(bpy) 3 ]Cl 2 sensitization, about 4.6 times and 2.9 times higher than Fe 2 P and Ni 2 P. The roles of different components in the system have been explored and corresponding working mechanism is proposed. This work demonstrates a new type of dye-sensitized systems consisting of bimetallic phosphides and provides a facile route to regulate their photocatalytic performance.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2017 ·Vol. 7 ·期 27 ·16273-16281 · IF 3.108

Enhanced adsorptive removal of anionic and cationic dyes from single or mixed dye solutions using MOF PCN-222

Haichao Li,Xinyu Cao,Chuang Zhang,Qing Yu,Zijian Zhao,Xuedun Niu,Xiaodong Sun,Yunling Liu,Li Ma,Zhengqiang Li

Metal–organic frameworks (MOFs) are attractive for the removal of industrial dyes from aqueous pollution. However, effective simultaneous removal of oppositely charged dye ions is still a challenge. We find that zirconium–metalloporphyrin mesoMOF (PCN-222/MOF-545) exhibits excellent adsorption/removal capacities for numerous anionic and cationic dyes individually and together in solution. PCN-222 is fabricated by solvothermal synthesis and characterized by powder XRD and FT-IR methods to confirm its structure. N2 adsorption/desorption indicates PCN-222 has a large pore size of 3.2 nm and a surface area of 2336 m2 g−1. The zeta potential measurement shows that PCN-222 has a slight basic isoelectric point at pH 8 with appropriate potentials of 23.5 and −13.6 mV in the range of pH 3–10. These features facilitate the dual-function of PCN-222 toward anionic and cationic dyes, or even their complexes. The results show that PCN-222 has a maximum loading efficacy of 906 mg g−1 for anionic methylene blue (MB) and 589 mg g−1 for cationic methyl orange (MO) in a single dye system. Interestingly, when MB and MO co-exist in solution, they mutually enhance the capability by 36.8% (1239 mg g−1) for MB and 73.5% (1022 mg g−1) for MO. The adsorption kinetics, isotherms, stability and reusability of PCN-222 are reported. The results reveal that no significant changes of either crystal structure or loading capacity are observed up to eight recycles during the removal of MO and MB in solution. The adsorption efficacies of eight representative dyes are presented. Compared with previously published data, the capacity of PCN-222 ranks at the top. We prepared a facile adsorption chromatography column to demonstrate the broad application potentials of PCN-222 in dye removal from aqueous pollution. Finally, we propose a push–pull mechanism to explain the mutual enhancement of adsorption in a mixture dye solution.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHROMATOGRAPHY A · 2013 · IF 4.612

Fe3O4@MOF core–shell magnetic microspheres for magnetic solid-phase extraction of polychlorinated biphenyls from environmental water samples

Xiangfeng Chen,Ning Ding,Hao Zang,Hoisze Yeung,Ru-Song Zhao,Chuange Cheng,Jianhua Liu,T.-W. Dominic Chan

Fe 3 O 4 @MIL-100 core–shell magnetic microspheres were, for the first time, used as the sorbent for the magnetic solid-phase extraction (MSPE) of polychlorinated biphenyls at trace levels in environmental water samples. GC coupled with tandem MS was used for sample quantification and detection. The Box–Behnken design was used to determine the optimum extraction parameters influencing extraction efficiency through response surface methodology. Under the optimized conditions, the developed method showed good linearity within the range of 5–4000   ng   L −1 , low limits of detection (1.07–1.57   ng   L −1 ; signal-to-noise ratio   =   3:1), and good extraction repeatability (relative standard deviation   <   12%; n   =   5). Environmental samples collected from the Yellow River, local lake, wastewater, and snow water were processed using the developed method. The results demonstrated that the Fe 3 O 4 @MOF core–shell magnetic microspheres are promising sorbents in the MSPE of aromatic pollutants from environmental water samples.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHROMATOGRAPHY A · 2018 · IF 3.716

Moisture stable Ni-Zn MOF/g-C3N4 nanoflowers: A highly efficient adsorbent for solid-phase microextraction of PAHs

Ning Zhang,Chuanhui Huang,Ping Tong,Zunmei Feng,Xiaoping Wu,Lan Zhang

Volatile polycyclic aromatic hydrocarbons (PAHs) in water and soil are associated with status in the human body. Development of simple, efficient detection method is challenging due to the coating could be attacked by the abundance of water in the direct-immersion solid-phase microextraction. The stability of coating is essential to the analysis results. In this paper, a stable Ni-Zn MOF/g-C 3 N 4 (MG NFs) nanoflowers with cavity traps structure was firstly reported and acted as solid-phase microextraction (SPME) adsorbent for PAHs. Markedly enhanced moisture and acid stability of the MG NFs was obtained through the doping the hydrophobic graphitic carbon nitride (g-C 3 N 4 ) and metal ions into metal organic frameworks (MOFs). The aperture environment and ambient environment of MG NFs were changed by the doping of the Ni and the g-C 3 N 4, respectively. The moisture and acid stability of MG NFs were prominently increased under the dual protection. Compared to commonly used commercial coatings, the MG NFs own large surface area, unique nanoflowers structure and numerous open metal sites on the nanosheets, which demonstrated significant extraction superiority for PAHs. The MG NFs coated fiber was used for the SPME preconcentration of PAHs and couped with GC–MS for detecting PAHs. It presented low detection limits (0.1–3.0 ng L −1 ), wide linearity (0.3–5000.0 ng L −1 ) and good linearity (the correlation coefficient >0.9951). The inter-day and intra-day relative standard deviation (RSD) (n = 3) for three replicate extractions using one fiber was 3.8%–9.1%, and 3.5%–9.2%, respectively. The fiber-to-fiber reproducibility (n = 3) was 4.2–11.8%. The coupling method was successfully applied in the analysis of real water and soil samples with satisfactory recoveries of 82.9–109.2%, 84.2–106.4%, and the corresponding RSDs were 2.4–11.3%, 3.6–10.8%, respectively. The results indicated the effectiveness of NG NFs coated fiber in further practical application.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。