Advanced Fiber Materials
·
2024
·Vol. 6
·期 2
·444-457
·
IF 17.2
Xiao Yuanxiang,Jiang Jingjing,Cai Rui,Fu Jiajia,Xiang Shuangfei,Zhao Shujun,Fu Feiya,Diao Hongyan,Liu Xiangdong
Unpredictable pandemics are likely to pose a significant global threat in the future, and biologically protective textiles will play critical roles in controlling the spread of pathogens during outbreaks. Herein, we present a novel metal–organic framework (MOF) composed of repeating units of a Cu(II)/(L-Cys) 2 complex formed through coordination bonds between Cu(II) and L-Cys, while being interconnected by ionic bonds involving Cu(II) and the carboxylate group of L-Cys. After covalently embedding the MOF nanofibers onto cotton fiber surfaces, the resulting fabrics exhibit remarkable virucidal and antibacterial capabilities. Remarkably, even after 200 friction or 50 laundering cycles, the high antiviral ability to inactivate all phi- × 174 within 10 min was maintained, and the bacterial reduction rate against E. coli and S. aureus remained nearly at 100%. The remarkable virucidal effect of the L-Cys@Cu MOF structure is elucidated through a series of α-amylase denaturation simulation tests, providing the first experimental demonstration of the antiviral mechanism, whereby MOF nanofibers induce protein denaturation to inactivate viruses. Moreover, cytotoxicity assessments confirm that the fabrics adorned with MOF nanofibers are safe for human skin. These advantages are promising for the development of protective textiles, highlighting the great potential of nanoscience in combating pandemics. Graphical Abstract
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Haiyi Jin,Wangyi Zhou,Zhenyu Guo,Hailiang Xu,Xiaoli Zhong,Tai-Shung Chung,Die Ling Zhao,Hongjun Lin
The escalating presence of antibiotics and antibiotic-resistant bacteria in wastewater poses a pressing threat to both human health and ecosystems. Addressing this challenge requires innovative approaches while photocatalytic membranes emerge as promising solutions because they offer multiple functions to separate and degrade/sterilize antibiotics and antibiotic-resistant bacteria simultaneously. In this study, we for the first time developed in-situ grown Ni-Fe metal-organic framework/carbon quantum dot (NiFe-MOF/CQD) membranes with NiFe-MOF seeds pre-integrated into the substrates. The incorporation of CQDs not only enhances the hydrophilicity and integrity of NiFe-MOF membranes that results in both a high water flux of 119.7 L m −2 h −1 bar −1 and a high antibiotic rejection of 98.1% to rifampicin, but also promotes the photo-Fenton activity by enhancing the visible light absorption and photoelectrons (e − )-holes (h + ) separation. Therefore, the degradation efficiency of rifampicin in a photo-Fenton system within 100 min by NiFe-MOF/CQD composites (84.9%) surpasses that of NiFe-MOFs (63.1%). Additionally, NiFe-MOF/CQDs can effectively inactivate both Gram-negative and Gram-positive bacteria in the photo-Fenton system. The supreme separation performance of NiFe-MOF/CQD membranes and photo-Fenton activity of NiFe-MOF/CQDs underscore the significant potentials of the newly invented photocatalytic membranes in treating wastewater containing antibiotic and antibiotic-resistant bacteria.
✓ 已验证
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2025
·
IF 5.1
Mingming Luo,Fang Li,Panpan Dong,Yijun Tan,Ruowei Liu,Longping Xu,Pei Zhao,Zijian Wu
Kanamycin (KANA), a widely used antibiotic associated with foodborne disease, requires accurate monitoring solutions. This study presents a novel ultrasensitive electrochemical aptasensor for KANA quantification using a signal amplification method. The sensing platform was constructed with Cu/Al-MOF@Ti 3 C 2 nanocomposites as the support and incorporated aptamers specifically recognizing KANA. Among them, Cu/Al-MOF provided a high specific surface area for anchoring a large number of aptamers, Ti 3 C 2 was used to enhance the conductivity of the aptasensor, the aptamers have been used for the improvement of the sensitivity of the aptasensor, and the insertion of Cu/Al-MOF into Ti 3 C 2 sheets effectively prevents stacking between Ti 3 C 2 sheets. In the context of KANA, the specific recognition of the aptamer led to a decrease in the electrochemical signal. Under optimal conditions, the logarithm of the electrochemical output signal versus KANA concentration was linear over the range of 10 fM to 100 nM with a limit of detection (LOD) of 0.74 fM. In addition, the aptasensor showed excellent accuracy and high reproducibility and has been successfully employed in actual samples, enabling the detection of a wide range of targets by simply replacing the matching aptamer.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Chenyang Dai,Jia-Han Zhang,Cheng-Yu He,Rongrong Dai,Likun Pan,Yusuke Yamauchi,Jing Zhang,Zhengtong Li,Xingtao Xu
Photothermal materials exhibiting broadband optical absorption and high energy efficiency are highly sought after in the field of solar-driven evaporation. Herein, we present a novel photothermal material derived from polymetallic metal–organic frameworks (MOFs) through a d-d interband transition (d-d IBT) engineering strategy. This approach enables comprehensive occupation of electronic states within ±4 eV relative to the Fermi level through 3d transition metal coordination, achieving an exceptional average solar absorption efficiency of over 97 % across the full solar spectrum (250–2500 nm). This breakthrough effectively overcomes the inherent wide bandgap limitation of MOFs that traditionally restricts their full-spectrum solar utilization. Leveraging its remarkable broadband sunlight harvesting capacity and ultrafast localized heating performance, this evaporator engineered with high-entropy alloy nanoparticles, achieves an evaporation efficiency surpassing 98 % under one sun irradiation while maintaining a high evaporation rate of 2.80 kg m −2 h −1 . Moreover, this evaporator demonstrates exceptional desalination efficiency even with high-salinity seawater (20 wt%), while the waste heat generated during operation can be strategically repurposed to produce green electricity, enhancing its sustainability profile. Thus, the FeCoNiMnCuAlZn high-entropy alloy nanoparticle-based photothermal evaporator offers innovative solutions for addressing the scarcity of clean water resources and the need for green energy.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Sustainable Systems
·
2025
·
IF 6.1
Mingchuan Yang,Chunyan Tang,Meiqi Han,Zhaohui Tong,Yuechao Yang,Liwen Gao,Boning Su,DengLun Chen,Junyin Li,Long Zhang,Shugang Zhang
In order to solve the problem of difficult precise nutrient release caused by loose pores in bio-based coated controlled-release fertilizers, this study explores the integration of Metal–Organic Framework (MOF) materials into bio-based coatings. Specifically, MOF-303 is synthesized and used to modify biocomposite coatings mainly derived from natural bio-polyol castor oil, which improved the controlled release performance through unique self-assembling and pore-forming properties of MOF-303. Characterization confirmed the successful incorporation of MOF-303 into the bio-based coatings, resulting in a smoother surface and fewer pores. Specifically, MOF-303 is synthesized and used to modify biocomposite coatings mainly derived from castor oil, which enhanced the controlled-release performance by adjusting the pore structure of the coating. The modified CRFs demonstrated improved controlled-release performance, with nitrogen (N) release periods extending from 63 days in unmodified coatings to 77 and 105 days with 1% and 1.5% MOF-303, respectively. Application trials on potted spinach revealed significant benefits, with yield increases of 37.51% and 30.83% under U and M1 treatment, respectively. This study highlights the potential of MOF-303-modified bio-based CRFs (MBCFs) to offer sustained and precise nutrient supply, thereby improving agricultural productivity and efficiency.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2025
·
IF 5.6
Qianxilong Wang,Jiakuo Chen,Jiansheng Wang,Xiongfeng Zeng,Ruimin Wang,Yingna Zhao
In this paper, TiO 2 nanotube arrays with gap characteristics were designed and fabricated. Moreover, by adjusting the ratio of metal ions to ligands (1:20), a fully coated Co-MOF/TiO 2 composite photoanode was obtained; Secondly, tests such as XPS and EPR were adopted and combined with theoretical calculations to verify the construction of Type II heterojunctions, which promoted the separation of photogenerated electron-hole pairs and thereby enhanced the cathodic protection effect of the composite photoanode. Finally, to promote green and environmentally friendly anti-corrosion materials, an in-depth study was conducted on the anti-corrosion and anti-pitting effects of composite photoanodes on 304SS with different application areas (1cm 2 ,25cm 2 ,100cm 2 ).
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2025
·
IF 8.4
Yifei Luo,Guohe Huang,Yongping Li,Jing Huang,Yao Yao,Peng Zhang,Zixin Zhang,Jian Shen,Jianan Yin,Xiujuan Chen,Yuwei Wu,Mengna Li,Kai Zhao,Sichen Gao,Chun Zhang
Ensuring the safe removal of fluoride from drinking water poses a significant challenge in numerous remote communities affected by fluoride contamination. Therefore, this study focuses on the in-situ growth of MOF—AlFu on ceramic filters (CFs), thereby synthesizing in-situ MOF-modified ceramic filters (IMCFs) for effective fluoride removal from drinking water in such communities. Initially, we conducted response surface optimization of the IMCF preparation process, followed by comprehensive characterization. Based on SEM, XRD, and FTIR analyses, it is confirmed that AlFu successfully grows on the surfaces and within the pores of CFs, forming layered structures that enhance the effective adsorption of fluoride on IMCFs. Besides, zeta potential and FTIR results indicated that electrostatic adsorption, ion exchange and hydrogen bonding are the primary mechanisms of fluoride adsorption on IMCFs, which is also confirmed by the adsorption kinetics. The results of adsorption isotherms show that the maximum adsorption of IMCFs is 9.51 mg/g. Within the pH range of 4–10, IMCFs reduced the fluoride concentration from 10 mg/L to below 1.2 mg/L. Furthermore, the IMCF retains over 75 % of its adsorption capacity after undergoing five use cycles, exhibiting remarkable durability during the multiple cycling filtration process. This study suggests that the developed IMCF can serve as a safe and effective defluoridation technology for purifying drinking water in remote communities.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Petroleum Science
·
2025
·
IF 6.1
Chi Li,Ji-Xiang Guo,Li Wang,Wen-Long Zhang,Peng-Cheng Xue,Chen-Hao Gao
China possesses abundant heavy oil resources, yet faces challenges such as high viscosity, underdeveloped production technologies, and elevated development cost. Although the in-situ catalytic viscosity-reduction technology can address certain technical, environmental, and cost problems during the extraction process, the catalysts often suffer from poor stability and low catalytic efficiency. In this study, a green and simple room-temperature stirring method was employed to synthesize a class of highly efficient and stable 2D MOF catalysts, which possess the capability to conduct in-situ catalytic pyrolysis of heavy oil and reduce the viscosity. Under the condition of 160 °C, a catalyst concentration of 0.5 wt%, and a hydrogen donor (tetralin) concentration of 2 wt%, the viscosity-reduction rate of Fe-MOF is as high as 89.09%, and it can decrease the asphaltene content by 8.42%. In addition, through the structural identification and analysis of crude oil asphaltenes, the causes for the high viscosity of heavy oil are explained at the molecular level. Through the analysis of catalytic products and molecular dynamics simulation, the catalytic mechanism is studied. It is discovered that Fe-MOF can interact with heavy oil macromolecules via coordination and pore-channel effects, facilitating their cracking and dispersal. Furthermore, synergistic interactions between Fe-MOF and the hydrogen donor facilitates hydrogenation reactions and enhances the viscosity-reducing effect. This study provides a novel strategy for boosting heavy oil recovery and underscores the potential of 2D MOFs in catalytic pyrolysis applications.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Bio
·
2025
·
IF 10.2
Yu Han,Xiufeng Jia,Yinwei Yang,Pei Guo,Chao Li,Yunze Zhang,Li Yin,Bo Jia,Haitao Wang
The development of bioactive scaffolds capable of orchestrating osteogenesis while modulating inflammatory responses remains a critical challenge in bone tissue engineering. To address this unmet need, we engineered a multifunctional composite scaffold through precise integration of poly(lactic-co-glycolic acid) (PLGA), type I collagen, zinc-imbued metal-organic frameworks (Zn-MOFs), and macrophage chemotactic factor (MCF) via extrusion-based 3D printing. Systematic biological assessments in vitro revealed the scaffold's remarkable osteoinductive capacity, evidenced by significant upregulation of alkaline phosphatase (ALP) activity (2.78±0.10 fold increase vs control, p<0.05) and enhanced collagen type I deposition (10.79±1.12 fold increase vs control, p<0.05) within 14 days of culture. In vivo implantation in rat femoral defect models demonstrated superior bone regeneration outcomes, with micro-CT analysis showing bone volume/ total volume (BV/TV) 31.39±3.04% compared to 16.44±3.26% in control (P<0.05). The Zn-MOF component mediated sustained release of Zn 2+ ions (cumulative release: 89.6±9.08% over 18 days). This dual-functional system synergistically combines MCF-driven cellular recruitment with Zn 2+ -mediated immunomodulation, creating a pro-regenerative microenvironment. Our findings not only demonstrate the feasibility of 3D-printed multi-material constructs for complex tissue engineering applications but also establish a new paradigm for developing smart biomaterials that concurrently address biological regeneration and inflammatory control.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Xiaoxin Wu,Si Chen,Huasen Shen,Yunan Tian,Guoning Wu,Tingting Ma,Mengjun Li,Yuyu Li,Zhaohuai Li
Separators constitute vital components in high-energy-density lithium metal batteries (LMBs), yet their propensity to fail under lithium (Li) dendrite growth remains a critical limitation. In this work, we report a commercial Celgard separator engineered with pearl-like nanospheres (Celgard@PNS) to enable electrochemically stable and dendrite-free lithium metal anodes (LMAs). The PNS-functionalized layer in the Celgard@PNS ensures rapid and homogeneous Li ion flux, which stabilizes LMAs and effectively mitigates dendritic Li deposition. Moreover, the PNS modification fosters the development of a robust solid-electrolyte interphase (SEI) layer. The Celgard@PNS-based Li||Cu half-cell exhibits stable Coulombic efficiency for 110 cycles, and the corresponding Li||Li symmetric cell sustains long cycling stability (>900 h) at a high current density of 10 mA cm −2 with an areal capacity of 1 mAh cm −2 . Impressively, when paired with a high-mass-loading NCM811 cathode (22.5 mg cm −2 ), the Li||NCM811 full cell retains 81.4 % of its initial capacity after 140 cycles at 0.5 C. These results underscore the potential of the Celgard@PNS separator for practical implementation in high-capacity LMBs.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
·
2025
·
IF 4.9
Ahmed M. Omer,Eman M. Abd El-Monaem,Heba S. Hassan,Mahmoud A. Elmeligy,Angela Kleinová,Abdelazeem S. Eltaweil,Abolfazl Heydari
pH-sensitive carriers have emerged as an optimal choice for the oral administration of anticancer drugs, exhibiting the desired release performance. This study aims to develop biocomposite beads for the sustained release of the anticancer drug 5-fluorouracil (5-FU). Here, 5-FU was encapsulated within a ZIF-8 metal-organic framework (MOF), which was subsequently impregnated into amino-chitosan beads. The resulting Am-CS@ZIF-8 biocomposite beads were characterized for their chemical structure, surface morphology, elemental composition, crystallinity, surface charges, and mechanical properties utilizing Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), zeta potential analysis, and a texture analyzer, respectively. The developed beads exhibited a textured surface, denser composition, and a positively charged surface with a maximum zeta potential of +12.4 at pH 7.4. In comparison to Am-CS beads, the Am-CS@ZIF-8 biocomposite beads demonstrated superior mechanical properties, achieving a maximum stress value of 5.668 MPa compared to the 1.874 MPa recorded for pure Am-CS beads. pH sensitivity was assessed through the investigation of water uptake behavior at pH 1.2 and pH 7.4. The Am-CS@ZIF-8 biocomposite beads demonstrated a high encapsulation efficiency of approximately 81.6 % for 5-FU. They exhibited pH-responsive release behavior, with only 17 % of the drug released at pH 1.2 after 2 h and a sustained release of 52 % at pH 7.4 over 24 h. The release mechanism was predominantly governed by Fickian diffusion, as closely fitted by the Peppas-Sahlin kinetic model. The formulated carrier confirmed its biodegradability under enzymatic physiological conditions, suggesting its potential applicability as an effective system for the oral delivery of anticancer drugs.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Yanling Wang,Zhaozhu Zhang,Mingming Yang,Junya Yuan,Peilong Li,Meng Liu
Co-MOF (cobased metal-organic frame) nanosheets were developed onto the surface of PBO (poly(p-phenylene benzobisoxazole)) fabric, and OMMT (modified montmorillonite) was incorporated into phenolic resin synergistically to improve the wear resistance of PBO/phenolic resin composites. Co-MOF nanosheets with a large specific surface area exhibited strong interlocking and excellent compatibility between the fabric and resin. In addition, OMMT possessed excellent affinity with phenolic resin and a larger lamellar space, and then polymer chains could be conveniently entangled into interlayers, which further confined the movement of molecular chains caused by friction heat. In addition, a weak interlayer force was conducive to facilitating the formation of a uniform and robust transfer-film on the counterpart. It was demonstrated that the Co-MOF@PBO/OMMT composites presented optimal tribological behavior due to the synergistic effect between interfacial modification and OMMT reinforcement.
✓ 已验证
DOI
PubMed
高影响因子