JOURNAL OF ETHNOPHARMACOLOGY
·
2019
·
IF 3.414
Bojun Chen,Jijun Li,Yuhuan Xie,Xi Ming,Gang Li,Jinjin Wang,Meng Li,Xiaohong Li,Lei Xiong
Ethnopharmacological relevance Cang-ai volatile oil (CAVO) is a traditional Chinese medicine (TCM) inhalational preparation for the treatment of some depressive and emotive disorders. Aim of the study This research aimed to evaluate the efficiency and possible mechanism of intranasal CAVO administration on depression in chronic unpredictable mild stress (CUMS)-induced rats compared to lavender volatile oil (LVO) treatment after CUMS exposure and bilateral olfactory bulb impairment (OBI) in rats. Materials and methods Forty depressive-like model rats induced by CUMS were evaluated by the forced swim test (FST), open field test (OFT), and sucrose preference test (SPT). The model rats were divided into five groups: CUMS (n = 8), CAVOh + CUMS (n = 8), CAVOl + CUMS (n = 8), LVO + CUMS (n = 8), and OBI + CAVO + CUMS (n = 8). The CUMS-induced rats were treated for a period of 4 weeks. The other healthy rats were regarded as the control (CTR, n = 8) subjects. The levels of serotonin (5-HT) and dopamine (DA) and their respective metabolites homovanillic acid (HVA) and 5-hydroxyindol acetic acid (5-HIAA) were measured in brain tissue homogenates of CUMS-induced rats using enzyme-linked immunosorbent assay (ELISA). Results CAVO ameliorated depressive-like behaviors (p < 0.05 ). The levels of DA in the CUMS group were lower than those in the CTR and CAVOh groups (** p < 0.01 and * p < 0.05 ). The levels of HVA were lower in the CUMS group than in the CTR, LVO, OBI + CAVOh and CAVOh groups (** p < 0.01 and * p < 0.05 ) and lower in the OBI + CAVOh group than in the CAVOh group (** p < 0.01 ). The levels of 5-HT in the CUMS group were lower than those in the CTR and CAVOh groups (** p < 0.01 ). The levels of 5-HIAA were lower in the CUMS and OBI + CAVOh groups than in the CTR, LVO and CAVOh groups (** p < 0.01 ). Conclusions CAVO can improve depressive-like behaviors concomitant with the regulation of DA and 5-HT metabolism in the brains of CUMS-induced rats.
✓ 已验证
DOI
PubMed
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2019
·
IF 4.182
Fuxiang Feng,Xiaopo Niu,Li Wang,Xiangwen Zhang,Qingfa Wang
Ni/ZSM-5 nanosheet catalysts with different Si/Al ratios were modified by chemical liquid deposition (CLD) of tetraethoxysilane (TEOS) to tailor their acid spatial distribution. Their catalytic performance was evaluated with the hydroconversion of oleic acid to aviation-fuel-range-alkanes (AFRAs) at different reaction temperatures and H 2 pressures. The modified catalysts inherit the nanosheet structure with decreased external Brønsted acid concentration, especially the strong one. External Brønsted acid sites mainly favor the cracking of the deoxygenated products (C 17 /C 18 ). Internal Brønsted acid sites mainly enhance the isomerization of the linear AFRAs. And the catalytic activity of the external Brønsted acid sites was more sensitive to reaction temperature than that of the internal ones. The deoxygenation and cracking reactions were also more sensitive to H 2 pressure compared to the isomerization reaction. High AFRA selectivity of 51.4% as well as high iso/n -alkanes ratio of 1.7 were achieved at 250 °C and 10 bar over NS200(1).
✓ 已验证
产品关联
DOI
高影响因子
BIOMASS & BIOENERGY
·
2017
·
IF 3.219
Haian Xia,Hong Hu,Siquan Xu,Kehao Xiao,Songlin Zuo
A series of Fe/β zeolite catalysts with various Fe/Al ratios were prepared by liquid ion-exchanged method and were characterized by N 2 adsorption, XRD , UV–Vis DRS, EPR , NH 3 -TPD, and FTIR of pyridine adsorption techniques. The catalysts were used to catalyze the transformation of glucose into 5-hydorxymethyfural (HMF) in a biphasic reaction system under mild reaction conditions. The Fe/β catalysts with Lewis acidic Fe sites is able to effectively improve the HMF yield compared to H-β zeolite under identical reaction conditions, which is ascribed to the enhanced isomerization activity of glucose-to-fructose by Lewis acidic Fe species. Moreover, the Fe/Al ratio had a remarkable impact on the conversion of glucose and the yield of HMF, indicating that the synergetic effect of Lewis and Brønsted acid sites is critical to achieving high HMF yield. Under optimal reaction conditions, Fe/β-0.06 catalyst afforded 61% HMF yield at glucose conversion of 95% after the reaction of 90 min at 120 °C, which is one of the most effective catalysts for the conversion of glucose into HMF in a biphasic medium up to now. Furthermore, extra-framework isolated Fe species bound to the framework Al sites, are most likely the active sites for the isomerization of glucose-to-fructose in the conversion of glucose. The catalysts were very stable and could be reused at least five runs without significant loss in the catalytic activity .
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY
·
2017
·Vol. 93
·期 5
·1347-1358
·
IF 3.135
Yu Shen,Fumin Wang,Zongzhuang Han,Xubin Zhang
BACKGROUND ZSM-5 zeolites are of great importance in industrial catalysis. However, the diffusion limitations caused by small pore opening restrict the extent of catalytic conversions over conventional ZSM-5. Many studies have shown that mass transfer in zeolite channels can be improved by controlling the morphology or creating additional mesoporosity. Here, the catalytic performance is further improved by the creation of hollow structure and intracrystalline mesopores in ZSM-5 zeolite. RESULTS The characterization results demonstrated that hollow ZSM-5 with intracrystalline mesopores can be synthesized by using a simple one-step hydrothermal strategy with a commercial gemini-type cationic surfactant containing hydrophilic hydroxyl groups. Compared with the Fe-substituted conventional ZSM-5, the Fe-substituted hollow ZSM-5 with intracrystalline mesopores show remarkably enhanced catalytic performance in the hydroxylation of phenol. About 52.2% conversion of phenol can be obtained with almost 96.8% selectivity to dihydroxybenzenes. The catalytic activity remained almost unchanged after five cycles. CONCLUSION The newly created hollow structure and intracrystalline mesopores in ZSM-5 zeolite showed enhanced catalytic activity and reusability for the hydroxylation of phenol, which is higher than most reported systems. The prepared catalyst is a promising alternative material for the hydroxylation of phenol. © 2017 Society of Chemical Industry
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2017
·
IF 3.615
Yong Zhang,Huiping Zhang,Ying Yan
A heterogeneous catalyst (Cu/ZSM-5) was prepared by a metal-organic chemical vapor deposition (MOCVD) method under nitrogen atmosphere using Cu(acac) 2 as the copper precursor, and further characterized by XRD , AAS , SEM, BET, H 2 -TPR and XPS as well as catalytic activity performance for the oxidation of toluene. N 2 adsorption data revealed that the samples (CVD-4) prepared by MOCVD with calcination at 500 °C for 4 h possessed higher surface areas than that (CVD-BC) not calcined. The results of XPS demonstrated that CVD-4 exhibited higher redox property and more surface oxygen species compared with CVD-BC and IM (Cu/ZSM-5 catalyst prepared by impregnation). In particular, the CVD-4 catalysts prepared by MOCVD with calcinations showed the highest catalytic activity for toluene oxidation with 90% conversion of toluene at 293 °C with the feed concentration of 1000 ppm and GHSV of 15,000 h −1 , which was lower than IM (310 °C). The results of a reaction durability test revealed that the Cu/ZSM-5 catalysts prepared by MOCVD possessed excellent durability for toluene oxidation for 63 h, while the conversion of toluene fell down from 90% to 60% after 48 h over IM catalyst.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2024
·
IF 7.1
Chaoqiang Wu,Xin Zhang,Wei Liu,Chengyong Wang,Qianqian Jiang,Feifei Chen,Quanzhen Liu,Fei Cao,Gaowei Zheng,Alei Zhang,Kequan Chen
Chitin, as the second most abundant biomass in nature, possesses 7 wt % biologically fixed nitrogen, and its direct valorization into valuable nitrogen (N)-containing chemicals is optimal. Herein, we report the biosynthesis of two specific furan-based amine compounds, 2-acetyl-4-aminofuran (2A4AF) and 3-acetylamino-5-(α-aminoethyl)-furan (3A5AEF), from chitin-derived 3-acetamido-5-acetylfuran (3A5AF) via biocatalytic deacetylation and reduction amination, respectively. An amidase (MmH) from Starkeya sp. and an R-selective aminotransferase (ATA117) from Arthrobacter sp. were obtained, which can, respectively, convert 3A5AF to 2A4AF with a yield of 79.3% (47.58 mM) and (R)-3A5AEF (enantiomeric excess (ee) value of >99%) with a yield of 84.0% (126 mM), respectively, under the optimal conditions. The biosynthesis efficiency of the two amines was high in comparison with chemical approaches. This work paves the way for green and efficient production of furan-based amino chemicals from inexpensive renewable chitin resources.
✓ 已验证
产品关联
DOI
高影响因子
Engineering
·
2024
·
IF 10.1
Pan Wang,Tao Cheng,Zhuangxin Wei,Lu Liu,Yue Wang,Xiaohua Tian,Jianming Pan
Expanding the specific surface area of substrates and carrying out precise surface engineering of imprinted nanocavities are crucial methods for enhancing the identification efficiency of molecularly imprinted polymers (MIPs). To implement this synergistic strategy, bioinspired surface engineering was used to incorporate dual covalent receptors via precise post-imprinting modifications (PIMs) onto mesoporous silica nanosheets. The prepared sorbents (denoted as “D-PMIPs”) were utilized to improve the specific identification of adenosine 5′-monophosphate (AMP). Significantly, the mesoporous silica nanosheets possess a high surface area of approximately 498.73 m 2 ∙g –1 , which facilitates the formation of abundant specific recognition sites in the D-PMIPs. The dual covalent receptors are valuable for establishing the spatial orientation and arrangement of AMP through multiple cooperative interactions. PIMs enable precise site-specific functionalization within the imprinted cavities, leading to the tailor-made formation of complementary binding sites. The maximum number of high-affinity binding sites ( N max ) of the D-PMIPs is 39.99 μmol∙g –1 , which is significantly higher than that of imprinted sorbents with a single receptor (i.e., S-BMIPs or S-PMIPs). The kinetic data of the D-PMIPs can be effectively described by a pseudo-second-order model, indicating that the main binding mechanism involves synergistic chemisorption from boronate affinity and the pyrimidine base. This study suggests that using dual covalent receptors and PIMs is a reliable approach for creating imprinted sorbents with high selectivity, allowing for the controlled engineering of imprinted sites.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Lingwu Meng,Maosheng Lin,Qirui Guo,Longzhao Zhang,Xiangyu Huang,Shule Zhang,Weihua Ma
Stabilizing metal species at the atomic level and tuning their catalytic properties is a significant challenge. Herein, an N-doped Fe x O y -N-ZSM-5 catalyst with layered and chain-like graphene structures is reported. The catalyst can selectively catalyze the oxidation of triethylamine (TEA) with an efficiency of 99.7 % at 240 °C, and maintain an N 2 yield of 97.6 % over the reaction temperature range of 240–360 °C. The results indicate that the layered graphene in the catalyst provide anchor sites for active Fe, while the abundant chain-like graphene act as connectors between ZSM-5 and the layered graphene, offering ample opportunities for TEA and its intermediates to contact the catalyst surface. This increases the number of active sites on the catalyst, thereby enhancing the catalytic performance of Fe x O y -N-ZSM-5. Notably, due to the interaction between FeO x and FeN x species, Fe x O y -N-ZSM-5 exhibits excellent thermal stability and water resistance, demonstrating promising potential for practical.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Mingfu Li,Liyuan Huai,Yingchuan Zhang,Hongli Ma,Pingjun Zhang,Feixiang Xu,Jian Zhang,Liqun Jiang
The green synthesis of 5-hydroxymethylfurfural (HMF) from biomass feedstocks is a crucial step for the development of sustainable fuels, resins and plastics. Here, a novel binary catalytic system was developed with metal–organic frameworks (MOFs) and deep eutectic solvents (DESs), which synergically exhibited a superior fructose dehydration efficiency with a HMF yield of 98.5% within 40 min. The replacement from terephthalic acid to 2,5-furandicarboxylic acid as the organic ligand in MOFs catalysts altered the coordination microenvironment of metal nodes, resulting in remarkably enhanced fructose conversion rates. The formation of hierarchical porous structures and moderated Brønsted acid sites in sulfonated MOFs further promoted the HMF production. Notably, HMF could be readily separated from the MOFs-DESs system and the MOF catalyst maintained stable performance after six recycles. Theoretical calculations clarified a positive correlation between the hydrogen bond interaction (between fructose and DESs components) energy and reaction efficiency. This study provided a new strategy to couple hierarchical solid acid catalysts with functional solvents binary towards effective and sustainable upgrading of biomass-derived molecules.
✓ 已验证
产品关联
DOI
高影响因子
ANALYST
·
2024
·Vol. 149
·期 4
·1271-1279
·
IF 3.6
Aiwen Su,Dan Luo,Shixuan Li,Yanli Zhang,Hongbin Wang,Lijuan Yang,Wenrong Yang,Pengfei Pang
T4 polynucleotide kinase helps with DNA recombination and repair. In this study, an electrochemical biosensor was developed for a T4 polynucleotide kinase activity assay and inhibitor screening based on phosphate pillar[5]arene and multi-walled carbon nanotube nanocomposites. The water-soluble pillar[5]arene was employed as the host to complex thionine guest molecules. The substrate DNA with a 5′-hydroxyl group initially self-assembled on the gold electrode surface through chemical adsorption of the thiol group, which was phosphorylated in the presence of T4 polynucleotide kinase. Titanium dioxide nanoparticles served as a bridge to link phosphorylated DNA and phosphate pillar[5]arene and multi-walled carbon nanotube composite due to strong phosphate-Ti4+-phosphate chemistry. Through supramolecular host–guest recognition, thionine molecules were able to penetrate the pillar[5]arene cavity, resulting in an enhanced electrochemical response signal. The electrochemical signal is proportional to the T4 polynucleotide kinase concentration in the range of 10−5 to 15 U mL−1 with a detection limit of 5 × 10−6 U mL−1. It was also effective in measuring HeLa cell lysate-related T4 polynucleotide kinase activity and inhibitor screening. The proposed method offers a unique sensing platform for kinase activity measurement, holding great potential in nucleotide kinase-target drug development, clinical diagnostics, and inhibitor screening.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2025
·
IF 8.3
Li Cui,Yimin Wang,Zhen Yuan,Xiaoli Zhang,Yuewen Chen,Xiya Zhang,Yihu Ke,Zhile Xiong,Hai Liu
Oxidizing glycerol (the primary by-product of biodiesel production) into 1,3-dihydroxyacetone (DHA) can significantly boost the economic feasibility of the biodiesel industry, but the catalyst deactivation remains a significant challenge. Herein, we present a novel approach that achieves a breakthrough in the conversion of glycerol to DHA through the integration of porous zeolite platform (bio-ZSM-5), derived from corn straw templates, with the traditional Au/CuO catalyst via mechanical milling. Under alkali-free conditions, the synthesized Au/CuO@bio-ZSM-5 catalyst exhibits remarkable glycerol conversion rate of 97.3% and DHA selectivity of 92.2%. Notably, the catalyst retains its efficacy with a glycerol conversion of 89.7% and DHA selectivity of 90.3% even after three regeneration cycles, surpassing all previously documented catalysts for this specific reaction. Serial characterizations and density-functional theory (DFT) calculations reveal that the incorporation of bio-ZSM-5 can modify the electronic structure of surface Au, reduce the adsorption energy of glycerol, and elevate the reduction temperature. This work is expected to provide an effective perspective for the design of catalysts with high cyclic stability.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2024
·
IF 7.1
Li Cui,Ren Gao,Qiaowei Zhang,Kun Jiang,Hongyan He,Wei-Lu Ding,Fangqin Cheng
Crown ethers (CEs) are promising materials for lithium isotope (6Li and 7Li) separation for their unique cavity structure and size effect, but the low partitioning of Li+ makes the practical implementation not applicable. The loss of CE molecules is also a critical problem. In this work, benzo-15-crown-5 functionalized imidazolium ionic liquids with different alkyl chain lengths ([Cn(B15C5)mim][NTf2], n = 6, 8, 10) are synthesized. The association constants of [Cn(B15C5)mim][NTf2] and Li+, Li+ partition, and the separation factor of 6Li and 7Li using [Cn(B15C5)mim][NTf2] were investigated. Compared with the B15C5 monomer, the covalent bonding of B15C5 onto the cation of imidazolium ILs contributes to the dramatic increase of binding ability toward Li+. The association constants of [Cn(B15C5)mim][NTf2] with Li+ increase with the elevation of the alkyl chain length due to the flexibility changes. However, [C8(B15C5)mim][NTf2] delivers the most outstanding partition coefficient of Li+ up to 7.59 with a separation factor of 1.033 (273 K), exceeding those reported for CE-based materials. The increased hydrophobicity of [Cn(B15C5)mim][NTf2] enables sustainable and robust use in the separation process. Both molecular dynamics simulations and interfacial tension experiments confirm that [C8(B15C5)mim][NTf2] exhibits the best affinity to the interfaces of dichloroethane/water. The coordination environment of Li+ can be tuned by regulating the length of the alkyl chains, resulting in different isotopic effects. This study offers a promising system for the effective and sustainable separation of 6Li and 7Li.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）