文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,358+ SCI 论文 与阿拉丁产品引用相关
2,303,472.95 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第13至24个,产品总数96个

设置提升方向
发光
JOURNAL OF LUMINESCENCE · 2022 · IF 4.171

Environmentally-friendly and low-cost Fe3+-doped broadband NIR light-emitting phosphors

Lin Xiang,Xianju Zhou,Yongjie Wang,Li Li,Sha Jiang,Guotao Xiang,Chuan Jing,Jingfang Li,Lu Yao

Near infrared (NIR) light emitting phosphors have attracted more and more attention with the development of science and technology . Herein, we report a series of environmentally-friendly low-cost Fe 3+ -activated ZnGa 2 O 4 phosphors which exhibit intense broadband NIR light emitting. According to density functional theory (DFT) calculations, ZnGa 2 O 4 host possesses an indirect wide bandgap. The emission of the Fe 3+ -doped phosphors demonstrates a wide band spanning from 650 to 850 nm, with the maximum at 720 nm and a full width at half maxima (FWHM) of 70 nm, showing a large overlap with the absorption of phytochromes (PR and PFR). The luminescence intensity remains at 71% when the temperature is raised to 423 K. The phosphors are fabricated into light emitting diodes (LEDs) which produces strong NIR emission with CIE color coordinates of (0.65, 0.31). All these results suggest that ZnGa 2 O 4 :Fe 3+ is a promising NIR luminescent material , which is expected to be a candidate for indoor plant culture LEDs.

研究领域: 材料科学 · 光电子学 · 农业生物技术 · 固体物理 · 无机化学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF LUMINESCENCE · 2023 · IF 3.6

Achieving the performance luminescence of LaMg0.5Sn0.5O3:Cr3+ by [In3+-Sc3+] co-substitution [Mg2+-Sn4+] and its application to the biodetection and night vision lighting

Bingkai Gao,Lei Zhang,Runqiu Peng,Panlai Li,Qian Wu,Zhijun Wang

The exploration of performance luminescence near-infrared (NIR) material is crucial for rapidly developing NIR spectroscopic techniques. Herein, the NIR LaMg 0.5 Sn 0.5 O 3 :Cr 3+ phosphor was synthesized by a high temperature solid-state method. And its luminescence performance were improved by [In 3+ -Sc 3+ ] substituting for [Mg 2+ -Sn 4+ ]. The half-peak width can be expanded to 211 nm, the emission intensity can reach the seven times of that un-substitution, and the emission intensity at 423 K was maintained at 60 % of that at room temperature , moreover, the internal quantum efficiency can reach 54.2 %. On this basis, the phosphor converted light emitting diodes ( pc -LEDs) were achieved by combining La(Mg 1-x Sn 1-x In x Sc x ) 0.5 O 3 :Cr 3+ with blue LED, importantly, it can be applied to the biodetection and night vision lighting, which indicate its application value.

研究领域: 材料科学 · 生物医学工程 · 光学材料 · 分子影像 · 转化医学 · 光电子学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2018 ·Vol. 28 ·期 34 ·1802848 · IF 13.325

Water-Soluble Biocompatible Copolymer Hypromellose Grafted Chitosan Able to Load Exogenous Agents and Copper Nanoclusters with Aggregation-Induced Emission

Zhenguang Wang,Yu-e Shi,Xuming Yang,Yuan Xiong,Yanxiu Li,Bingkun Chen,Wing-Fu Lai,Andrey L. Rogach

A water-soluble, positively charged polymer is obtained by copolymerizing chitosan with hypromellose, and the evaluation of its biocompatibility and the capacity for the loading of exogenous agents is performed. Films based on hypromellose grafted chitosan (HGC) are employed as a matrix to fabricate composite films by dehydration-triggered aggregation of copper nanoclusters (NCs). The resulting HGC/Cu NC films are transparent and exhibit an aggregation-induced emission enhancement of copper NCs, with a resulting photoluminescence quantum yield of 42%. The application of these orange emitting films as color converters for fabrication of remote light-emitting devices is demonstrated.

研究领域: 高分子科学 · 生物材料 · 纳米医学 · 药物递送 · 光电子学 · 生物医学工程 · 荧光成像 · 转化医学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Small · 2024 ·Vol. 20 ·期 31 ·2309034 · IF 13

Realizing Near Infrared Mechanoluminescence Switch in LAGO:Cr Based on Oxygen Vacancy

Sheng Wu,Binli Xiao,Dongliang Jiang,Yao Xiao,Peishan Shao,Zhiyao Zhou,Yinzhen Wang,Puxian Xiong

Mechanoluminescence (ML) materials are featured with the characteristic of “force to light” in response to external stimuli, which have made great progress in artificial intelligence and optical sensing. However, how to effectively enable ML in the material is a daunting challenge. Here, a Lu 3 Al 2 Ga 3 O 12 :Cr 3+ (LAGO: Cr 3+ ) near infrared (NIR) ML material peaked at 706 nm is reported, which successfully realizes the key to unlock ML by the lattice-engineering strategy Ga 3+ substitution for Al 3+ to “grow” oxygen vacancy (O v ) defects. Combined with thermoluminescence measurements, the observed ML is due to the formation of defect levels and the ML intensity is proportional to it. It is confirmed by X-ray photoelectron spectroscopy and electron paramagnetic resonance that such a process is dominated by O v , which plays a crucial role in turning on ML in this compound. In addition, potential ML emissions from 4 T 2 and 2 E level transitions are discussed from both experimental and theoretical aspects. This study reveals the mechanism of the change in ML behavior after cation substitution, and it may have important implications for the practical application of O v defect-regulated turn-on of ML.

研究领域: 材料科学 · 凝聚态物理 · 光学功能材料 · 缺陷化学 · 传感技术
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2012 ·Vol. 2 ·期 12 ·5403-5410 · IF 0

Uniform square-like BaFBr:Eu2+ microplates: controlled synthesis and photoluminescence properties

Qinghua Liang,Yao Shi,Wangjing Ma,Zhi Li,Xinmin Yang

Uniform square-like BaFBr:Eu2+ microplates were successfully fabricated via a simple water/oil emulsion method. Various characterization techniques such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, Scanning electron microscopy (SEM) and Transition electron microscopy (TEM) were employed to examine the phase, size, morphology, and structure of the products. It was found that the morphology and size of products were strongly dependent on the reaction parameters, such as the ratio of reactants, the reaction time and the reaction temperature. The length and thickness of these square-like BaFBr:Eu2+ microplates can be tuned by adjusting the reaction time and temperature. Well-dispersed cuboctahedron and corner cut cuboid-like BaFBr:Eu2+ particles were produced when the reaction temperature was increased above 60 °C. A possible formation mechanism of the products was discussed based on the time and temperature-dependent experimental results. The optical properties were characterized by photoluminescence (PL) spectroscopy as well as kinetic decay. Eu2+-doped dependent luminescent intensity was investigated in detail. The prepared BaFBr:Eu2+ phosphors are considered promising materials for fluorescent applications.

研究领域: 材料科学 · 无机化学 · 纳米技术 · 光学材料 · 功能材料
✓ 已验证 DOI
查看原文 查看 PubMed
JOURNAL OF APPLIED POLYMER SCIENCE · 2016 ·Vol. 134 ·期 10 · IF 1.866

Enhanced emission from Alq3 in amphiphilic block copolymers PEG-b-PVK-co-Alq3 synthesized via RAFT polymerization

Fei Fang,Fan Kong,Xueqin Zhang,Mengqi Lin,Yichi Zhang,Shounian Ding

A series of amphiphilic poly(N-vinyl carbazole) (PVK) block copolymers containing tris(8-hydroxyquinoline) aluminum (Alq 3 ) have been synthesized via reversible addition-fragmentation chain transfer (RAFT) radical polymerization with trithiocarbonate terminated polyethylene glycol (PEG) as a RAFT agent. The chemical structures of the block copolymers have been identified by 1 H nuclear magnetic resonance and Fourier transform infrared spectrometer. The analysis of gel permeation chromatography indicates that the polydispersity indices of the block copolymers are lower than 1.30. The results of thermogravimetric analysis show that the decomposition temperatures of the copolymers are higher than 330 ° C . The optical properties of the copolymers have been investigated and the obviously enhanced emission from Alq 3 has been found due to resonance energy transfer from PVK to Alq 3 . © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44573.

研究领域: 高分子化学 · 材料科学 · 光电子学 · 纳米功能材料 · 聚合物合成 · 荧光材料 · 能量转移
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF LUMINESCENCE · 2019 · IF 2.961

Synthesis and photoluminescence properties of CsPbBr3 quantum dots by using para-xylene as the anti-solvent

Hui Gao,Siyuan Liu,Zhipeng Xue,Wenjing Liu,Yanguang Nie,Guoqing Chen,Xiaolong Li

Herein, CsPbBr 3 quantum dots (QDs) were successfully synthesized via the supersaturated recrystallization (SR) method by using para-xylene as the anti-solvent. The as-prepared CsPbBr 3 QDs exhibited high quantum efficiency (78%) and narrow luminescent peaks with a full width at half maximum of around 21.2 nm. Compared with the commonly-used anti-solvents, para-xylene shows low toxic effect and high freezing point (13.3 °C). Therefore, CsPbBr 3 QDs can be easily preserved in the refrigerator like an ice-cream for further use. The maximum photoluminescence (PL) emission intensity would reach 90% retention after 60 days’ storage in the refrigerator. By using this simple method, the stability of CsPbBr 3 QDs has been effectively improved for long-term storage and further application.

研究领域: 材料科学 · 纳米科技 · 光电子学 · 无机化学 · 半导体材料
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING · 2023 · IF 4.1

A novel co-substitution strategy to enhance the luminescence performance of Zn2TiO4:Cr3+ phosphor

Kang Cheng,Xinyue Liu,Weichao Huang,Xinyong Gong,Chaoyong Deng

Cr 3+ is an ideal activator for near-infrared phosphor. Cr 3+ ions have an electronic structure in which the outermost shell is not fully filled, which makes the emission of Cr 3+ susceptible to the crystal field environment and the change of local structural. Therefore, when Zn 2+ -Ti 4+ ion pairs are replaced with Al 3+ -Al 3+ /Ga 3+ -Ga 3+ ion pairs , changes in the crystal structure and the crystal field are strengthened, which improves the luminescence performances of Zn 2 TiO 4 :Cr 3+ phosphors. The thermal stability and the intensity of the luminescence can be clearly seen to have increased.

研究领域: 材料科学 · 无机化学 · 发光材料 · 固体物理 · 功能材料
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Nanomaterials · 2019 ·Vol. 2019 ·期 1 ·2769519 · IF 2.233

One-Pot Synthesis of Photoluminescent Self-Assembled Carbon Dot Monolayer Films

Hongchong Guo,Wei Li,Gang Sun,Bo You

We propose a facile and simple synthesis of photoluminescent (PL) carbon dot self-assembled monolayer films (CD-SAMFs) at oil-water interfaces. By using styrene both as the carbon source and the oil phase medium, we got our amazing CD-SAMFs under the copper acetate and hydrogen peroxide (Cu(Ac) 2 -H 2 O 2 ) catalytic-oxidation system. Without any surface modification, the spontaneously formed CD-SAMFs exhibit ultrathin thickness (<10 nm), bright luminescence, high transparency, and hydrophobicity, which have the potential as a new alternative to be used on multifunctional coating films, anticounterfeiting, displays, sensors, and optical devices.

研究领域: 材料科学 · 纳米科技 · 表面化学 · 光电子学 · 功能薄膜
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CERAMICS INTERNATIONAL · 2022 ·Vol. 49 ·期 7 ·10273-10279 · IF 5.532

Zero-thermal-quenching of LiAl5O8: Eu2+, Mn2+ phosphors by energy transfer and defects engineering

Daiyuan Liu,Ting Wang,Yichun Liu,Chao Wang,Zhichao Liu,Xiaodie Zhu,Ya Liu,Jian Zhang,Zhaowei Teng,Yang Zhong,Yakovlev Alexey Nikolaevich,Xuhui Xu

The photoluminescence behavior of inorganic phosphors is generally influenced by thermal stability, which determines the luminescence efficiency of the corresponding devices. Here, a series of Eu 2+ , Mn 2+ co-doped LiAl 5 O 8 blue-green-emitting phosphors with thermal robust are successfully fabricated. The concentration-dependent emission spectra and the decay curves of the as-obtained LiAl 5 O 8 : Eu 2+ , Mn 2+ samples manifest the occurrence of the energy transfer from Eu 2+ to Mn 2+ ions via dipole-dipole interaction, and the corresponding emitted colors are gradually modulated from blue to green under the excitation of 310 nm. Moreover, the zero-thermal-quenching luminescence is observed when the operation temperature is up to 423 K, which is attributed to the energy release from the trapping centers to emitting centers (Eu 2+ and Mn 2+ ) at high temperature. Furthermore, a warm white light-emitting diodes (WLEDs) device with correlated color temperature of 5061 K, a color rendering index of 80.6 and long-term stability is fabricated by combining UV LED chip (λ ex  = 310 nm), as-obtained LiAl 5 O 8 : Eu 2+ , Mn 2+ phosphor, commercially available red phosphor and green phosphor. These results prove the potential application of the as-obtained LiAl 5 O 8 : Eu 2+ , Mn 2+ phosphor for UV-pumped WLEDs devices.

研究领域: 材料科学 · 发光材料 · 固态化学 · 光电子学 · 无机化学 · 器件物理 · 纳米材料
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Geoscience Frontiers · 2020 ·Vol. 12 ·期 2 ·957-963 · IF 4.202

Stability and band gap engineering of silica-confined lead halide perovskite nanocrystals under high pressure

Ruijing Fu,Yaping Chen,Lingrui Wang,Zhiwei Ma,Pengfei Lv,Ying Song,Songrui Yang,Guanjun Xiao,Bo Zou

SiO 2 is the major mineral substance in the upper mantle of the earth. Therefore, studies of the silica-coated materials under high-pressure are essential to explore the physical and chemical properties of the upper mantle. The silica-confined CsPbBr 3 nanocrystals (NCs) have recently attracted much attention because of the improved photoluminescence (PL) quantum yield, owing to the protection of silica shell. However, it remains considerable interest to further explore the relationship between optical properties and the structure of CsPbBr 3 @SiO 2 NCs. We systemically studied the structural and optical properties of the CsPbBr 3 @SiO 2 NCs under high pressure by using diamond anvil cell (DAC). The discontinuous changes of PL and absorption spectra occurred at ∼1.40 GPa. Synchrotron X-ray diffraction (XRD) studies of CsPbBr 3 @SiO 2 NCs under high pressure indicated an isostructural phase transformation at about 1.36 GPa, owing to the pressure-induced tilting of the Pb-Br octahedra. The isothermal bulk moduli for two phases are estimated about 60.0 ​GPa and 19.2 GPa by fitting the equation of state. Besides, the transition pressure point of CsPbBr 3 @SiO 2 NCs is slightly higher than that of pristine CsPbBr 3 NCs, which attributed to the buffer effect of coating silica shell. The results indicate that silica shell is able to enhance the stabilization without changing the relationship between optical properties and structure of CsPbBr 3 NCs. Our results were fascinated to model the rock metasomatism in the upper mantle and provided a new ‘lithoprobe’ for detecting the upper mantle.

研究领域: 材料科学 · 高压物理 · 纳米材料 · 光学性质 · 地球物理学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2017 ·Vol. 7 ·期 76 ·48238-48244 · IF 3.108

Morphology control and enhancement of 1.5 μm emission in Ca2+/Ce3+ codoped NaGdF4:Yb3+, Er3+ submicrorods

Jiangyun Dai,Chao Yang,Hong Zhang,Hua Zhang,Guoying Feng,Shouhuan Zhou

The successful synthesis of rare earth doped nano/microcrystals with the desired morphology, uniform monodispersity, and intense infrared emission is of fundamental significance, and would facilitate their application in infrared emission-related miniaturization and integration in optoelectronics. However, simultaneously controlling the morphology and enhancing the infrared emission through simple and effective methods has not been well explored. In this study, via Ca2+ doping with an optimized concentration of 25 mol% in the hydrothermal solution, irregular NaGdF4:Yb/Er submicrocrystals converted into highly uniform submicrorods. Meanwhile, an obvious enhancement of visible upconversion (UC) and near-infrared (NIR) downconversion (DC) emission were obtained, probably due to the improved morphology and lowering the local crystal field symmetry around the rare earth ions induced by Ca2+ doping. Furthermore, Ce3+ ions with an optimized concentration of 2 mol% were codoped to intentionally tailor the branching ratio through efficient energy transfer from Er3+ to Ce3+. As a result, the ∼1530 nm emission intensity of the NaGdF4: 25Ca/2Ce/20Yb/2Er submicrorods increased by about 6.4 times in comparison with the NaGdF4:20Yb/2Er counterpart.

研究领域: 材料科学 · 光学工程 · 纳米技术 · 稀土化学 · 光电子学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。